Firefox is blocking Java even though I had the updated version. Now I can't update or uninstall Java.

On 4/2/12 Firefox informed me that Java had serious issues with security and I should let them block it, so I did. Later I found I couldn't play Pogo anymore so I tried to enable Java but it still wouldn't work. My Java is up to date, 6.0.290.11. Now I cannot update Java, error 1606, nor can I uninstall Java from my computer, same error cannot access location, in order to re-install. Since I was using the most updated version, my Java should not have been blocked. Anyone else have this problem? I am stuck and can't update or re-install or anything.

I have the latest version and today it blocked it

Similar Messages

  • HT4972 I replaced the computer I originally used to synch my iPhone. I get the message stating that my content will be erased, even though this is the computer I now synch with. Is there a way to make the update recognize the new computer?

    I replaced the computer I originally used to synch my iPhone. When trying to update to iOS5.0, I get the message stating that my content will be erased, even though this is the computer I now synch my phone with. Is there a way to make the update recognize the new computer so that my content will be kept?

    The best option is to copy your entire iTunes folder from your old computer to your new one using one of the methods described here: http://support.apple.com/kb/HT4527.  This will allow iTunes on your new computer to recognize and sync with your phone without deleting content.  You will also need to copy over any other synced data not in your iTunes library such as photos synced to your phone, calendars and contacts.
    If you can't do this, these articles will help you start syncing with your new computer with minimal or no data loss:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    Recovering your iTunes library from your iPod or iOS device

  • 6th gen nano keeps dispalying no radio signal even though I have the earpiece plugged in. Can anyone advise please?

    6th gen nano keeps displaying no radio signal even though I have the earpiece plugged in. Can anyone advise? Thanks

    Hey there larkandwarbler,
    It sounds like you are experiencing multiple issues with this iPod Nano 5th Gen. From what you are describing it seems we can isolate this to either the software or the hardware on the device with a couple of simple steps assuming you have tried another set of headphones. First, reset your iPod with this article:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    How to reset an iPod with a Click Wheel
    iPod models with a Click Wheel include:
    iPod nano (5th generation)
    iPod nano (4th generation)
    iPod nano (3rd generation)
    iPod nano (2nd generation)
    iPod nano
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    If you are able to reset it, but the issue persists, or you are unable to reset it, I would next attempt restoring it with iTunes:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have an older version macbook, I had an old version of firefox, it worked fine, I replaced it with the new version, now it won't open and my old version is go

    I have a OSX Version 10. 5. 7. The firefox I had was working fine, but it kept telling me to update, and it was working slow, I updated it to the newest version, it wouldn't download it unless I REPLACED, the old version, now it is gone, the new one doesn't work, I now have no firefox, I looked around on the forum, but found nothing and tried some suggestions, but I cannot get any version of firefox to open, and I had some serious book marks and passwords remembered, and I am in a bit of serious trouble, can someone tell me what to do?
    Bill

    Firefox 16.0.2 is the last version that works on an Intel Mac with the OS X 10.5 operating system.
    * http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/16.0.2/mac/
    Another possibility is to install the Firefox 10.0.12esr (BuildID=20130103094221) version that has more security updates, but misses features present in Firefox 16 (BuildID=20121024073032).
    * http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/10.0.12esr/mac/
    * http://www.mozilla.org/en-US/firefox/10.0.12/system-requirements/

  • My plugins don't work even though I have the latest version of adobe flash and java. )

    when I go to a site like you tube that require a plugin I get the message that Firefox has disabled this feature for security reasons. I then click on the feature update plug ins it take me to the adobe site I down load the latest version of adobe flash only to run into the same problem over again. I've tried updating this feature both manual & auto but with no success.

    Hi there
    No need to get testy. Lilybiri was being spot on with the comparison.
    The only solution for you will be to uninstall the Flash player, then locate an older version of the Flash player and install it on the Windows XP you have. Captivate is now at version 8 and several years have passed since version 1.1. You will likely not make 1.1 work with Windows 7 or Windows 8. In fact, the only way I'm aware to remotely make it work on those operating systems is by first ensuring you have the Professional or Ultimate version, then installing the Windows XP mode Virtual Machine.
    Here is a link for uninstalling the Flash Player
    And here is a link for the older versions
    Sorry, but you are on your own to sort exactly how far back you will need to go to find a version of Flash Player that works with this version of Captivate. And keep in mind, that even though you finally get a Flash Player version that allows it to run, you will only be able to run it on some form of Windows XP. It will not run on Windows 7 or 8 unless you install the VM. And when you do that, you will be stuck inside the VM and will not be able to record anything outside it in the 7 or 8 environment.
    Cheers... Rick

  • Firefox updated to its newest version 12.0. Now my Adobe Flash plugin freezes and hangs every website when it is enabled even though it is the newest version.

    Today Firefox updated to its newest version 12.0. Immediately after update, I couldn't load most websites. The web browser would just freeze. I have determined that the culprit is the Adobe Flash Plugin, however; even with the newest version of the plugin, I am still having problems. Any suggestions?

    can you try this suggestion [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_playing-flash-videos-makes-firefox-hang] and/or [[How do I upgrade my graphics drivers?]]

  • I keep getting a message asking me to download the newest version of firefox even though i have the newest version, is there a fix for this?

    When i first start Fire-Fox i keep getting a message telling me i need to upgrade it. Problem is i have the newest version already. I have checked repeatedly and have the newest version on my desktop already.

    You are using Firefox 2.0
    Latest version is Firefox 3.6 (http://www.mozilla.com/en-US/firefox/)

  • Told my internet firefox bowser is too old even though i have the latest version of firefox

    I wanted to just download Firefox again to see if that will solve the problem. If i do do I lose my bookmarks?

    What is the exact message that you are getting?  A screenshot, perhaps: https://forums.adobe.com/thread/1070933
    The Reader executable name is AcroRd32.exe

  • On my ibook G4 v 10.4.7, I have itunes verison 4.7.1(30) and a new shuffle. Even though I downloaded the newest version of itunes I still cannot sync music from my itunes to shuffle. What do I need to do to accomplish this?

    On my ibook G4v 10.4.7, I have itunes v 4.7.1(30) and even though I have downloaded the newest itunes version I still cannot get my itunes to recognize the shuffle to sync my music onto it. What do I need to do to get music onto the new shuffle?

    Hi, you need to upgrade to 10.5.x...
    Mac system requirements
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10 or later4
    Internet access is required; broadband recommended; fees may apply
    http://www.apple.com/ipodshuffle/specs.html
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 2GB at least)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
    There are workarounds if the 867MHz is the only hangup...
    http://sourceforge.net/projects/leopardassist/

  • Hi - I've brought the new iphone 5 but can't download my music from my itunes account even though I have the latest version (10.7). All i can see is that my account is not showing the iphone 5 as a 'managed device' and i dont know how to get this added ?

    Hi - I've brought my iphone 5 but cant seem to download my music from my itunes account onto it. I've downloaded the latest version of itunes as i heard this could be a problem but still no joy. The phone tries to sync when i plug it all in to the pc and even has the capacity bar showing about 12gb of audio but there is still nothing downloaded onto the phone.
    The only thing i can see that might be causing the problem is that when i go into my itunes account it doesn't show that the iphone 5 is an option is the 'managed device' section but i dont know how i can add the new iphone 5 to this....
    Can anyone please advise me on what to do ?
    Many thanks !
    Razor

    You can only sync to one computer/iTunes library. To make this your syncing computer:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Flash player is not recognized even though we have the current version

    upon clicking on a youtube url we get an error message stating that we need to install the current version of flash in order to play the url. We already have that install and when cut and pasting it into IE it works just fine.

    IE uses a different version of Flash (ActiveX) than other browsers use. You need the Plugin version for Firefox.
    1.Download the Flash setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del = Processes tab}
    3. Then run the Flash setup file from your Desktop.

  • I installed Firefox 4 beta, now that Firefox 4 is released, do I have to download the release version or I can apply updates to make it a release version?

    See my question

    It will automatically install the release version, though you already appear to have updated to the release version.

  • Deviantart keeps telling me to upgrade my firefox even though I have the latest version

    I keep updating and same story.

    Your UserAgent string in Firefox is probably messed up by another program that you installed. <br />
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter <br />
    ''If you see the warning, you can confirm that you want to access that page.'' <br />
    Filter = '''general.useragent.''' <br />
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
    Then restart Firefox

  • I fixed my Kin Onem, even though it had the dreaded 'updating modem' error.

    My Kin Onem was recently showing an 'updating modem' error that Verizon and Sharp (the phone's manufacturer) didn't seem to know much about, beyond the usual replacement options that were not very helpful. Not knowing what else to do, I bought and activated a different phone.  After activating my new phone, I decided to take another look at my Kin and, for some reason, I was able to fix it today, and the fix was actually pretty straightforward.
    After plugging my Kin into my PC, I went to 'Devices and Printers' (in the Start menu) and clicked on my phone's icon, which was now just a white hard drive icon since it was unrecognizable. When I clicked on it, Windows noted that there was an error, and asked if I wanted to run Troubleshoot. When Troubleshoot ran its course, it asked whether I wanted to search for a replacement device driver (since that is apparently where the error originated). After it searched for a new driver, my computer automatically installed one on my Kin and the 'updating modem' error message disappeared! My Kin then restarted itself, and it was good as new . I was able to sync it with Zune and put everything I had assumed was irretrievably lost onto my computer.
    I don't know whether the error will happen spontaneously again, but I am happy to have fixed it for now.

    >>Duplicate post removed for cross-posting violation of the Verizon Wireless Terms of Service
        See Why is my Kin onem "updating modem" and what does it mean?  for original message<<
    Message was edited by: Verizon Moderator

  • My iPod says I have music "already on this device" even though I deleted it all, and now I can't sync anything onto it from my computer

    So my 5th generation iPod is almost maxed out with storage, and so to save space, I deleted all the music I had downloaded in the Music app and I use Spotify to listen to all my music now. Not all music is on Spotify though, so there is one song that I want to add onto my iPod. The problem is that when I link my iPod to my computer it says that there are 154 songs already on the device, when there is no music on the device. I deleted it all, and when I go onto the Music app, it even says that there is no content. Whenever I am on the iPod menu on my computer, and I go on the Music tab, I have it selected to only sync selected playlists, artists, and etc.The only music that I have selected is the one song I want to sync, and it says that it will only sync one song. I keep trying to sync the one song, but for some reason it includes the other 154 songs, which I don't have the space for. It won't let me sync anything because of that. I just don't get why it says I have 154 songs on my iPod when I don't, and I don't know how to get rid of them. I thought that when you clicked an option and hit apply, that it would just replace everything on your iPod, but that isn't happening here. I'm just confused as to why it isn't letting me simply sync one song!
    Thanks!

    You had a glitch and the music files got corrupted. I know of no way to uncorrupt them.
    You can try using a computer app like iFunbox
    http://dl.i-funbox.com/
    to see if yo can get them from the iPod in a usable file.
    Otherwise you will have to re import them to your computer and sync
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • Can I use a WRT54GX2 as wireless bridge for my Blue Ray to an E1000 wireless router?

    I recently replaced my WRT54GX2 router with an E1000 for networking in my home.  I now have a Blu-Ray disk player, and thought I may be able to use the old WRT54GX2 to wirelessly bridge a network connection for the Blu-Ray.  I am having trouble fignu

  • Convert multiple page pdf to multiple jpg

    Hi, is there anyway of converting a multiple page pdf file in preview to multiple jpgs in one go? I've tried selecting all, but it still only converts one page into a jpg, when using the "save as" function. I'm currently having to convert each page i

  • How to select records inserted in a table in last 30 mins

    I need to select the records inserted or generated in the basic scott.emp table assuming date created is a new column which inserts the time at the time of creation select * from emp where  (date_Created) between  (sysdate -30/1440) and sysdate;Does

  • Order data as in IN clause

    Hi, Is there a way to order the result set to display in the same order as data supplied in IN clause example: select * from t_cu where cno IN ( 220, 120, 900, 350, 99, 1, 34 );I would like to display the data in the same order as 220, 120, 900, 350,

  • Reading Data from serial (Comm) Port in developer200 forms 6i

    Dears, I have developed an application using Dev2k forms 6i. I need to read data from a device (weigh bridge) that is attached to PC on comm port. scenario: when a vehicle comes on the Weigh bridge it calculates its weight and send it to the PC on se