Firefox is looking for localhost on 8080 but it is on Port 80

I moved countries and had trouble using localhost. I had some help but that did not work but I finally got localhost to work but my phpadmin still gives problems as firefox looks for localhost:8080/url instead of localhost/url.
localhost is on pert 80.
can anyone direct my efforts. I think my "help" tried to reconfigure all my localhost to 8080 nad left some of these port directives in.

Maybe check the connection settings.
You can find the connection setting here: Tools > Options > Advanced : Network : Connection

Similar Messages

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference. Is there a plug in I need?

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

I am looking for country field LAND1 but it is 3 char..where as in SAP

Hi All,
I am looking for country field LAND1 but it is 3 char..where as in SAP all countries have only 2 Char values. why it is defined as 3 CHAR ??
Please let me know !!!
Thank you
Madhu

Hi,
Please check table T005.
Also check this from online help (F1) regarding Country Key.
The country key contains information which the system uses to check entries such as the length of the postal code or bank account number.
The two-character ISO code in accordance with ISO 3166, which is delivered by SAP as a default, is usually used.
It could also be the vehicle license plate country-code or a typical country key, for example, in Germany the Federal statistics office key.
The country keys are determined at system installation in the global settings.
Since the country key does not have to correspond to the ISO code in all installations, programs that differ according to certain values of the country key cannot query the country key T005-LAND1, but have to program based on the ISO code T005 INTCA.
Regards,
Ferry Lianto

How do I authenticate my pc ? I tried looking for the authenticate computer but was unsuccesful.

How do I authenticate my pc ? I tried looking for the authenticate computer but was unsuccessful.

In the new itunes
Ctrl +B to show the top menu
Store > Authorise this Computer...

Looking for something in particular but can't find it

there was a post about cases and it had one on there that just came out that had a hard screen protector and it was 30 dollars and I'm wanting to buy it but I can't find it for the life of me any help would be appreciated thanks

I like the OtterBox cases for iPhone. They have the defender (water resistant) and armor (water proof) case. It's got 3 layers of support and it doesn't make the iPhone too big either. This site has reviews for the OtterBox cases that they offer, and it's pretty useful: http://semsons.blogspot.com. I just read on a blog from Semsons & Co. Inc. that they are offering free shipping on their unbeatable OtterBox cases for iPhones and BlackBerries. You can find the cases here: http://www.semsons.com/cases.html. This offer expires 4/14/08.

I am looking for a 'trashed' email but found a big gap from oct. 2010 to oct. 2011. where are all those emails?

i am trying to find an email from july 2011 from a specific person but find when i look in 'trash' that there are no emails kept from oct. 2010 to oct. 2011 from that person, and yet i know i received many. where can i find them?

That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

I installed update 9.01. Everytime i open firefox it looking for updates of addons and opens whatsnew page.

When i tried to open firefox it always opens whatsnew page.

See these articles for some suggestions:
*https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

Hi, just wondering, if I use the "Hotmail" option that appears in the Mail app on my Iphone 4S, does it automatically use SSL? I've tried to look for the SSL option but it doesn't appear....

Just want to make sure it is safe to use public wifi and push notifications for my Hotmail.

I Had the same us issye on iPhone 5s. Started when 7.1 came out in April. Only was to get the mail coming through ysing the mail app was to wipe the phone clean. It only worked agsin fir 36-48 hours. I had to install the Yahoo app to just tell me mail was available. i then manually opened the appke mail app. Apple was so help. My internet provider examined my email. Eventually agter 6 months and other issues starting, my carrier took back the phone and I'm in Samsung. Miss the iPhone but after trying 3 and all had the same issue something was up. Never found the issue. Apples service and quality gas dropped.

I signed into facetime on my ipad but it says it cant verify my email... i looked for the verifing email but it wasnt in my mail box

i signed into facetime on my ipad but it says it cant verify my email... it said that they sent a message to my email but it wasnt in my mailbox

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Loaded up version 5.0. When I did so, suddenly cannot access any of my favorites as Firefox says it is looking for a "proxy server."

Tried to load up Firefox version 5.0 on Saturday due to your lack of firewall support of Version 3.6 which led to a virus in my system that I was able to resolve out of the system once I went to "Safe Mode" and restored to previous date. In loading up your latest version, when I went into my Firefox Internet browser and tried to call up my Favorites, received message that Firefox was looking for a "proxy carrier" and I was unable to access any of my folders.

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

HT4889 Source computer getting stuck on "looking for other computers", but target computer finds source computer.

I'm hoping someone can help me get my source computer to find my target computer when running Migration Assistant. The source computer (late '08 macbook pro running OS X 10.7.5) gets stuck on "looking for other computers". But target computer (late '09 imac running OS X 10.7.5) finds source computer. Both show they are connected to same wifi network in System Preferences-network. Note: I have tried with both internet sharing on and off. Note: Source computer also can't find its external hard drive when plugged in. Related? Any ideas for either issue?

Ok, more updates.
In my old Mac (Pro) I have several hard drives installed. I was able to create a Time Machine back-up to a non-system HD. I plan on removing this volume and putting it in an external enclosure as soon as I can find the right cables for that enclosure. Meanwhile....
I saw on one support doc an instruction to open Sharing on the source Mac (my old one, in this case) and make sure the machine had a name specified. I already had done that, but noticed that a specific name based on that was mentioned for other computers to contact it. For example, if my source machine is named "myOldMac", other computers could address is at "myOldMac.local".
I connected the two computers directly via an Ethernet cable and I ran Migration Assistant again. When I got to the "Looking for source" screen, I clicked the button for "Other Server" and entered "afp://myOldMac.local". This actually found my old Mac. I was prompted to enter the password for the account "root". I changed the name to my account's short name -- "raboyle" not "Robert Boyle" -- and entered the correct password and I actually got a list of volumes to access. In the list were: the hard drives (by volume name), the home folders of the user accounts, and the Public Folders for each user account.
I tried accessing both my boot volume and the home folder for my primary account, and proceeded to a screen with the following text: "Choose which backup to transfer information from:". The list provided, however, was empty. On the chance that it was looking specifically for a Time Machine backup, I then specifically chose the HD volume with the backup I had just created. Again, the list to choose where to grab my data from was empty.
So, at least I'm advancing a little bit beyond the "Looking for source" screen ... but then again, since I hit yet another roadblock I can't say whether I've taken one step forward or two steps back.

Firefox was working on my new iMac but then, after switching on recently, won't connect to the web – whereas Safari has no problem.

===
Hi
I bought an iMac a week ago and installed Firefox via Safari. It worked fine for a while but, after a recently switching on, it won't connect to the web whereas Safari has no problems.
I've tried following the Firefox Help, looking into the iMac firewall, but still no luck.
I've no idea whether related or not but yesterday I had a system glitch where the iMac stated no wi-fi was installed and only connected via a physical lead to my house router. Also, there was no sound output via Safari. However, after booting up today all seems well – apart from Firefox still not working. It loads the start page but can't access the web.
I have Little Snitch running, and wonder if that's the culprit... but it's working fine with Safari, seemingly.
(Finally, how do I stop a dialogue box appearing on start-up saying that "To open “X” you need a Java runtime. Would you like to install one now?)
Any ideas anyone?
Cheers
Rob / Sheffield / UK
===

On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP. In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa. You may find the following Apple Support article helpful.

Looking for help getting EZdrummer to work in Logic Pro 9

First off let me say I have looked everywhere and even talked to toontack about the following problem. Toontrack as said that the plug-in is working properly and the problem is with Logic.
Ok so I purchased toontrack ezdrummer and drumkit from ****. After installing them and updating to ezrumming 1.2 I am unable to load ezdrummer in logic pro 9. The really strange thing is that it will launch when using garageband and fully function.
In logic it is not in AU manager and not there for selection in the channel strip, so I thought at first that it was only installing as a VST. However, when looking in Library>Audio>Plug-Ins>Components, EZdrummer.component is there. I thought this was where Logic looked for AU plug-ins but I'm now thinking thats wrong but I've not been able to find anything saying different.
Please guys any help you can offer would be outstanding. I'm so fed up I'm about to get a refund but I would rather use this software.
Thanks.

EZDrummer works fine here.
You could try trashing this file:
Macintosh HD/Users/YourUserName/Library/Caches/com.apple.audiounits.cache
On the next launch, Logic will rescan all your plugins.
You could also try a new OS X user account.
And what exact version of Logic are you using?

Looking for a select block

Hello!
I'm looking for a select block but I don't find it.. I want a block with four inputs,an input select, and one output. The output variable catch the value of the input variable which his position agree with the value of input select.
Ex.: I have input_1=20 input_2=30 input_3=40 input_4=50 and input select is 2. Output value is 30.
Exist a block like this? If not exist, which eay you try to build it? Thanks!
Thank you
Larson

Hi Larson
There is a select block - it is called "case structure" and is located in the structures palette (where the loops are).
You can use this structure to switch between different cases. You can have different types to control them.
Here is a simple example of what you want to do.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Case.vi ‏17 KB

Looking for a notepad to snych with PC

I am looking for an iPhone app which will allow me to do the following:
* Write short texts (notes) on the iPhone
* Write short texts (notes) on the PC
* Conveniently copy / sych them between PC and iPhone
I do NOT look for a web app, but need an app that communicates between PC and iPhone without the necessity of online access.
It seems there is no way of achieving this with the built-in "Notes" application. I have been browsing for quite some time searching for an alternative solution, but with no success. Any idea?

RC like myself do not work for Verizon wireless.
We are customers like yourself.
However his reply was 100% spot on. You may not like his answer but not liking it does not change the accuracy of it.
If you purchased at full price the unlimited data would have stayed.
But when people say upgrade they normally mean a free phone or greatly reduced phone with a two year contract.
The plan change was not necessary unless you purchased smart phones. If you were buying clam shell basic phones only then no plan changes should have been done.
You had 14 days to back out of the deal. Because you did not do so does not mean Verizon did not explain all your options.
You can port out and have Sprint or T-Mobile refund your early termination fees. I read this morning AT&T is also doing this on a limited basis.
Or you can go to Boost mobile or Net10 or Cricket prepaid all you can eat unlimited talk, text and data.
Also look at consumer cellular they may be just what you need.
They range from $10 to $50 check them out.
Good Luck

Firefox is looking for localhost on 8080 but it is on Port 80

Similar Messages

Maybe you are looking for