Firefox is not launching in one user account (just does not react at all) although it works fine in another account on the same laptop
Have been running Firefox without problem in both my own and my child's account on my laptop. Today, although Firefox still works normally in my own account, it does not launch at all in my child's account. Clicking on either the short cut or via AllPrograms results in the timer starting briefly and then disappearing and nothing happening. I have checked Task Manager and Firefox is not showing as running in the Processes tab. I have tried to set up a new profile in that account to no effect.
I am having exactly the same problem. This worked on all versions of Firefox up until mid last week. It started failing on Wednesday, coincident with the installation of Firefox 8.0 (see attached gif showing the automatic update on that date).
To fix the problem, you have to shut down Firefox 8.0 on one account, switch to the other account and then you can run it there.
If Firefox 8.0 is running on on account, the other account will run Firefox, but when you enter an URL it waits for quite a while then reports "The connection was reset. The connection was reset while the page was loading".
We also use Thunderbird 8.0 and it does not exhibit this problem, and works at the same time as Firefox 8.0. I suspect they might share some components.
I'd be happy to supply more details if needed.
Thanks,
Ed
Similar Messages
-
ITunes does not launch with new User Account (Vista)
One of my limited user accounts on Windows Vista because corrupt, so I created a new limited User Account and copied ALL of the files from the old to new.
Now, when I try to launch itunes on the new user account, it will not open at all. Itunes works on my administrative account, with no problem.
Can someone tell me the most pain-free way to resolve this issue. And, whatever solution, will I be at risk of losing my itunes libraries?
Thank you in advance.Hiya. Delayed again. Browsers being cranky. (I blame the aftershocks.)
It's actually plausible that it was installed in there (by doing a run as administrator on the installer itunes64setup.exe, perhaps). Because that suggests a possible cause for these continual permissions-related problems.
A lot of what you're seeing is consistent with damaged ACLs (access control lists) on files, folders and registry keys. Although it's a lot rarer than it used to be, one of the ways you could get borked ACLs was if a program (like iTunes or QuickTime) was installed in one user account, and then the user account it had been installed in was deleted (or otherwise rendered unusable).
We don't know which particular permissions are stuffed up here. But there's a shotgun approach to fixing them which used to work okay, although it's a bit fiddlier to do on a 64-bit system than a 32-bit system.
I'd strongly recommend setting up a system restore point prior to doing this, so you can revert if things turn to custard.
The basic technique you follow is from the following blog entry *with one important modification.*
[Solving setup errors by using the SubInACL tool to repair file and registry permissions|http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-e rrors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx]
The modification is that when you're editing the file to replace YOURUSERNAME with the name of the account, edit the first line so that %ProgramFiles% instead says %ProgramFiles(x86)% and after the line that reads:
*subinacl /subdirectories %programfiles%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
... add another line saying:
*subinacl /subdirectories %programfiles(x86)%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
(The first is to make sure the commands see the subinacl, because it installs in \Program Files (x86)\ on 64-bit systems, and the second alteration is to make sure that the permissions for the 32-bit program files are fixed too.
After doing that (it'll take a while to run), can itunes launch normally in the new account? -
Parental Control not logging for one user only
Hi, my two kids have parental control turned on for their individual accounts. On one account I get logs of their activity, the other I do not inside parental control preference pane. I found in the account that does not get logged the following:com.apple.familycontrols.overrides.plist.
Anyone know what this is and why it might be in that account?
Also any ideas as to why one account would not be getting logged?
I can see the details in her user account inside Library/applicationsupport/apple/parentalcontrol.
Imac G5, 2gb ram, 10.5.6The familycontrols.overrides property list interests me, especially because I can't find any information on it! Looking at its contents suggests that it is a temporary file created whenever an admin authorizes the managed user to exceed their daily login time limit (e.g., 30 minutes extra).
As for the not logging problem, I have it too. It seems to me that events.data -- the actual log -- is too large at 54 MB and am deleting it. (I note that it was updated at the time the managed user last used his account, so something is being recorded.) Wish me luck. -
Mail not responding under one user. Need to Force Quit to get out of it. My mail works when I log on as a user. Downloaded the latest Mountain Lion updates and reinstalled Mountain Lion as per Apple Phone Support instructions
TIAThanks for reponding. Here is the Console display. I hope this can help.
2013-09-08 8:11:49.646 AM Mail[449]: Using V2 Layout
2013-09-08 8:11:50.104 AM Mail[449]: Cannot lock focus on image <NSImage 0x7ffefba4c1a0 Size={0, 0} Reps=(
)>, because it is size zero.
2013-09-08 8:11:50.107 AM Mail[449]: (
0 CoreFoundation 0x00007fff970d5b06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff96aab3f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff970d58dc +[NSException raise:format:] + 204
3 AppKit 0x00007fff8e3ec21c -[NSImage _lockFocusOnRepresentation:rect:context:hints:flipped:] + 334
4 AppKit 0x00007fff8e3ec0b8 __51-[NSImage lockFocusWithRect:context:hints:flipped:]_block_invoke_0 + 82
5 AppKit 0x00007fff8e33b406 -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 170
6 AppKit 0x00007fff8e3ec056 -[NSImage lockFocusWithRect:context:hints:flipped:] + 210
7 AppKit 0x00007fff8e3ebf76 -[NSImage lockFocusFlipped:] + 125
8 AppKit 0x00007fff8e1cf2b0 -[NSGradientColor _updatePatternImage] + 121
9 AppKit 0x00007fff8e1ceeff -[NSGradientColor _updatePattern] + 487
10 AppKit 0x00007fff8e1cec8f -[NSGradientColor set] + 26
11 AppKit 0x00007fff8e44460c -[NSTableView drawBackgroundInClipRect:] + 657
12 AppKit 0x00007fff8e443d0f -[NSTableView drawRect:] + 1086
13 AppKit 0x00007fff8e328064 -[NSView _drawRect:clip:] + 4217
14 AppKit 0x00007fff8e3266c1 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 1656
15 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
16 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
17 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
18 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
19 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
20 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
21 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
22 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
23 AppKit 0x00007fff8e3246f2 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 817
24 AppKit 0x00007fff8e324143 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 314
25 AppKit 0x00007fff8e31fd6d -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 4675
26 AppKit 0x00007fff8e2e9c93 -[NSView displayIfNeeded] + 1830
27 Mail 0x0000000105859377 Mail + 189303
28 AppKit 0x00007fff8e2e91cc _handleWindowNeedsDisplayOrLayoutOrUpdateConstraints + 738
29 AppKit 0x00007fff8e8b4901 __83-[NSWindow _postWindowNeedsDisplayOrLayoutOrUpdateConstraintsUnlessPostingDisabled]_block_ invoke_01208 + 46
30 CoreFoundation 0x00007fff9709c417 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23
31 CoreFoundation 0x00007fff9709c381 __CFRunLoopDoObservers + 369
32 CoreFoundation 0x00007fff970777b8 __CFRunLoopRun + 728
33 CoreFoundation 0x00007fff970770e2 CFRunLoopRunSpecific + 290
34 HIToolbox 0x00007fff96d70eb4 RunCurrentEventLoopInMode + 209
35 HIToolbox 0x00007fff96d70b94 ReceiveNextEventCommon + 166
36 HIToolbox 0x00007fff96d70ae3 BlockUntilNextEventMatchingListInMode + 62
37 AppKit 0x00007fff8e2e6533 _DPSNextEvent + 685
38 AppKit 0x00007fff8e2e5df2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
39 AppKit 0x00007fff8e2dd1a3 -[NSApplication run] + 517
40 AppKit 0x00007fff8e281bd6 NSApplicationMain + 869
41 libdyld.dylib 0x00007fff8d5427e1 start + 0
2013-09-08 8:11:50.140 AM Mail[449]: Cannot lock focus on image <NSImage 0x7ffefb814390 Size={0, 0} Reps=(
)>, because it is size zero.
2013-09-08 8:11:50.143 AM Mail[449]: (
0 CoreFoundation 0x00007fff970d5b06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff96aab3f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff970d58dc +[NSException raise:format:] + 204
3 AppKit 0x00007fff8e3ec21c -[NSImage _lockFocusOnRepresentation:rect:context:hints:flipped:] + 334
4 AppKit 0x00007fff8e3ec0b8 __51-[NSImage lockFocusWithRect:context:hints:flipped:]_block_invoke_0 + 82
5 AppKit 0x00007fff8e33b406 -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 170
6 AppKit 0x00007fff8e3ec056 -[NSImage lockFocusWithRect:context:hints:flipped:] + 210
7 AppKit 0x00007fff8e3ebf76 -[NSImage lockFocusFlipped:] + 125
8 AppKit 0x00007fff8e1cf2b0 -[NSGradientColor _updatePatternImage] + 121
9 AppKit 0x00007fff8e1ceeff -[NSGradientColor _updatePattern] + 487
10 AppKit 0x00007fff8e1cec8f -[NSGradientColor set] + 26
11 AppKit 0x00007fff8e44460c -[NSTableView drawBackgroundInClipRect:] + 657
12 AppKit 0x00007fff8e443d0f -[NSTableView drawRect:] + 1086
13 AppKit 0x00007fff8e328064 -[NSView _drawRect:clip:] + 4217
14 AppKit 0x00007fff8e3266c1 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 1656
15 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
16 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
17 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
18 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
19 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
20 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
21 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
22 AppKit 0x00007fff8e326ad9 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2704
23 AppKit 0x00007fff8e3246f2 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 817
24 AppKit 0x00007fff8e324143 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 314
25 AppKit 0x00007fff8e31fd6d -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 4675
26 AppKit 0x00007fff8e2e9c93 -[NSView displayIfNeeded] + 1830
27 Mail 0x0000000105859377 Mail + 189303
28 Foundation 0x00007fff92d248a1 __NSFirePerformWithOrder + 359
29 CoreFoundation 0x00007fff9709c417 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23
30 CoreFoundation 0x00007fff9709c381 __CFRunLoopDoObservers + 369
31 CoreFoundation 0x00007fff970777b8 __CFRunLoopRun + 728
32 CoreFoundation 0x00007fff970770e2 CFRunLoopRunSpecific + 290
33 HIToolbox 0x00007fff96d70eb4 RunCurrentEventLoopInMode + 209
34 HIToolbox 0x00007fff96d70b94 ReceiveNextEventCommon + 166
35 HIToolbox 0x00007fff96d70ae3 BlockUntilNextEventMatchingListInMode + 62
36 AppKit 0x00007fff8e2e6533 _DPSNextEvent + 685
37 AppKit 0x00007fff8e2e5df2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
38 AppKit 0x00007fff8e2dd1a3 -[NSApplication run] + 517
39 AppKit 0x00007fff8e281bd6 NSApplicationMain + 869
40 libdyld.dylib 0x00007fff8d5427e1 start + 0 -
I have 6 email accounts on my iPhone 6 and want to delete one that is set up incorrectly. It is the only account that does not have the red DELETE bar...what do i need to do to delete it?
It is hosted by GoDaddy, is this the problem?Thank you so very much! That was just what I needed to do, problem solved.
-
Error Account user="demonw7\SAPServiceP71" does not exist. PI 7.1 EHP1
Hi,
I had error message during installation of PI 7.1 EHP 1, The error is
RACE 2009-08-25 16:29:11.656 [synxcuser.cpp:2121]
CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
existence check for user demonw7\SAPServiceP71 returned false.
INFO[E] 2009-08-25 16:29:11.656 [synxcuser.cpp:147]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
lib=syslib module=syslib
FSL-01027 Account user="demonw7\SAPServiceP71" does not exist.
TRACE 2009-08-25 16:29:11.671 [synxcuser.cpp:302]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
lib=syslib module=syslib
Exception thrown near line 149 in file synxcuser.cpp
Stack trace:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcaccmg.cpp: 114: bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
synxcaccmg.cpp: 88: PSyAccount CSyAccountMgtImpl::getAccount(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Please Advise ? do i need to create the user manually ?
Best Regards
Fernand LesmanaHi Juan,
I have checked and re-tried to install from beginning but now got another problem :
ERROR 2009-08-26 10:21:10.437 [sixxcstepexecute.cpp:984]
FCO-00011 The step doConfiguration with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|1|0|NW_MSS_DB|ind|ind|ind|ind|3|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0|doConfiguration was executed with status ERROR .
TRACE 2009-08-26 10:21:10.468
Instantiating new NWUsageTypeBasic
Please advise
Best Regards
Edited by: Fernand Lesmana on Aug 26, 2009 4:59 AM -
My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?
You're in the wrong forum. Post to iPhoto for iLife, not iPhoto for iOS.
-
Adobe requires an ID account to install software on a single computer. However I have a portable Mac as well as a desktop system. Can I install another copy with the monthly paid installation on the second computer or do I need to buy another seat with the same account?
J-GMHey tferm78!
I have a couple of options for you to consider. First, you may simply want to authorize all of your computers for your iTunes account and turn on Automatic Downloads, so that when you download something on one computer, it will automatically download to other computers:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
You could also look into iTunes Match, a service that would seamlessly link all of your iTunes libraries:
Apple - iTunes - Match
http://www.apple.com/itunes/itunes-match/
Lastly, here is an article that will help you move your library from one computer to another, if you so desire:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
HT1660 how can I use one single library for all users on the same laptop?
how can I use one single library for all users on the same laptop?
You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library. -
Installing Firefox with windows 7 64bit mode just does not work.
I have windows 7 64bit mode. I cannot install firefox, it crashes all the time when I open it. I know the problem is because my windows 7 is in 64bit mode. Can you (firefox support) or someone on this forum provide the simple and easy steps of getting it to work. Also can you (firefox) hurry up and release a 64bit version. I'm using google chrome and crazy browser as they seem to have no problems at all. I really want to use firefox but it just won't set up for me because I'm running win7 64bit mode. If I was running win7 32bit mode I wouldn't be having any issues. Has anyone out there got a simple step by step solution for this? It it mind boggling that with todays technology no one has a simple fix for this issue. Help!!!!!
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4I have been running Win 7 64 bit on an HP Pavilion lap for several months. The whole browser thing has been a nightmare. My work involves heavy duty internet research. Firefox crashes every few minutes. There is no specific event I can find that kicks this off, but running the latest Flash Players and Adobe Reader makes it a lot worse. In fact, I had to set up the adobe reader to not run within the Firefox window. I had to back off to an old version of adobe Reader and Flash Player to accomplish this. I love Firefox. I was disappointed to have to uninstall it as it was impossible to run searches with it.
So then it proved to be that IE either version 8 or 9 was even worse. I could not keep it up long enough to run a search.
So I installed Chrome which has some nice features, but it also crashes, albeit more gracefully so I do not lose my place and it makes a quick recovery but there are many online applications where Chrome just does not work.
My son also has Win7 64 bit and says he is also having the same problems.
I want my Firefox back! Please fix it. -
User or group does not exists.
Hi,
I am running an unattented installation of SQL on a server. I run it with the following configuration:
;SQLSERVER2008 Configuration File
[SQLSERVER2008]
;************************* CORE ARGUMENTS *************************
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
online, Business Intelligence Development Studio, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
; Setup will not display any user interface. ***
QUIET="True"
; Needed argument for silent installation
IACCEPTSQLSERVERLICENSETERMS="True"
;*************************** OPTIONAL *****************************
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console. ***
INDICATEPROGRESS="True"
; Setup will display progress only without any user interaction.
QUIETSIMPLE="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
ENU="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
Services (RS).
INSTANCENAME="MSSQLSERVER"
; Agent account name
AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Auto-start service after installation. ***
AGTSVCSTARTUPTYPE="Automatic"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT AUTHORITY\NetworkService"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Latin1_General_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS=”CRB\dsstest”
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS=”CRB\dsstest”
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Specifies which mode report server is installed in.
; Default value: “FilesOnly”
RSINSTALLMODE="DefaultNativeMode"
; Full-Text filter launcher service account
FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
I run the installation with the user crb\dsstest, but i get the following error:
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp: Data:
2011-12-28 12:59:02 Slp: SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp: DisableWatson = true
2011-12-28 12:59:02 Slp: Stack:
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp: Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Can anyone help me?Hi,
I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
The following are the error details:
2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
2011-12-28 12:58:47 AS: Action: Validating Account
2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
2011-12-28 12:58:47 AS: Result: Error
2011-12-28 12:58:47 AS: Result: Invalid
2011-12-28 12:58:47 AS: Result: (Validation) Complete
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Result: (Utility) Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
2011-12-28 12:58:47 AS: Result: (Utility) Success
2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
2011-12-28 12:58:47 AS: Result: Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Validating Start Mode
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Action: Validating Allow in Process
2011-12-28 12:58:47 AS: Data: AllowInProcess=1
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: ----------------------------------------------
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp: Data:
2011-12-28 12:59:02 Slp: SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp: DisableWatson = true
2011-12-28 12:59:02 Slp: Stack:
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp: Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Do you need more information then above? The above chech do not fail for the network service:
2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
2011-12-28 12:58:46 ACE: Validating service account is not LocalService
2011-12-28 12:58:46 ACE: Validating service account is a user account
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
2011-12-28 12:58:46 AS: ----------------------------------------------
2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
Do you have any idea what is worong? -
I installed SSRS on an existing instance. Configured SSRS using report manager, loaded some reports and they work as expected.
The problem is I can not launch(IE) Report Manager UI due to error in description. I can launch the Report Manager IF I RUN IE AS ADMINISTRATOR. The details of error from SSRS log file listed below.
The main page SSRS page starts to display. The display starts with "Home | my subscriptions |site Settings..." in upper right side, and "SQL Server Reporting Services" in upper left. Then the error displays
User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
Starting IE as administrator starts the Report Manager with out problems.
Does anyone have suggestion, is more information needed? Thanks, Joe
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed. at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed. at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!1c98!08/07/2014-16:19:00:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch()
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Using folder N:\WFSLR_JOE\MSRS11.WFSLR_JOE\Reporting Services\RSTempFiles for temporary files.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 1 snapshots, 4 chunks, 0 running jobs, 0 persisted streams, 4 segments, 4 segment mappings, 0 edit sessions.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch() endsHi Joseph_SQL,
The following operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications: Windows Server 2012 R2, Windows 8.1, Windows 8, Windows Server 2012, Windows Server 2008 R2, Windows 7, Windows Server
2008 and Windows Vista.
Because the noted operating systems limit permissions, members of the local Administrators group run most applications as if they are using the Standard User account. To avoid open Report Manager in Internet Explorer always using Run as administrator option,
we can refer to the following configuration steps:
Add Reporting Services URLs to trusted sites.
Report Manager Folder Settings
Report Manager Site Settings
For more details about how to configure the settings, please refer to the following article:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx. After finishing the configuration, we can re-open Report Manager in Internet Explorer without using
Run as administrator.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Rsh - connecting using user name that does not exist on remote computer
hi
is it possible to connect to a remote computer as, for example John, if user account John does not exist on the remote computer but is listed in .rhosts?
this is what i have written in .rhosts on the remote computer ( Work ):
home root
home John
when I connect as root:
rlogin -l root Work
everythings fine, but when I try to connect as John I get the incorrect login message
I know the message above probably answers my question, but I want to be sureIf the user id exists, you can bypass the authentication with .rhosts or /etc/hosts.equiv files; but you can't login to a remote machine as an anonymous user.
-
i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?
Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
One can still do most Admin things in Standard user. -
how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!
In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
Maybe you are looking for
-
Re: Life cycle in SAP BW
Hi gurus, I am actually a newbie in looking for a job in SAP BW. Am more bent to put a 2-21/2 yrs experience since there's not place for freshers in UK industry, but most of the offers come saying either i should have a experience in full life cycle.
-
Can anyone help me on this error: ALC-DSC-000-000
Hello Everyone, The error displayed to a user when submitting the form on the basic Purchase Order (PO) App is: A fatal error has occured that has caused this instance to stop. Error : ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal
-
Urgent:Automatic Syndication
SDNers, We arre facing a problem in working with automatic import. the reqd settings are in place in MDIS(username & password changes),we stopped & started the server also. When I place a XML file in the ready folder, the file is being picked but in
-
Library transfer to my MacBook
What is the simplest means of transferring my itunes library to my macbook? Can this be done via the ipod somehow? Thanks, Mark
-
User exit for MM42: force PRCTR
Hello! When user changes material, I want to forcefully provide profit center for given plant (field MARC-PRCTR). This field is located in the "Logistics - store -> Other Logistics Data" view. I tried with enhancements MGW00001 and MGW00002, but not