Firefox is preventing Java from loading Pogo games which require it

I have just updated to the latest Firefox and now java is being prevented from loading Pogo games which require it. I have unchecked the block popups box and enabled java script but each time I try to load I get a message on the java concol saying permission denied. I went to IE8 (yuck) and the game loaded fine.
Help please.

For as much as I spend on membership there I don't need these problems... I DIDN'T update my FF it happened automatically which * me off since i like to wait until all the bugs are gone...
''edited for language - TonyE''

Similar Messages

  • How to prevent images from loading?

    I am working on creating a web gallery in Dreamweaver CS3.  The thumbnails are in a horizontal strip within a layer above the full sized image layer, in other words the strip is  hiding part of the image, but only when the image is in a vertical orientation. (the strip has no background, so all that is visible are the actual thumbnails) Upon clicking show/hide text , in a toggle configuration, the strip fades, or shows.   On my computer it works perfectly. However, once uploaded, it takes forever to load the images.
    The problem: Although I have the thumbnail images are set to preload,  all of the full size images are loading as well, which takes alot of time. Is there a way to prevent the full sized images from loading, i.e. only when the thumbnail is clicked?
    Frames, in which one frame is thumbnails, and another the is images, is what I normally would use, and have a page for each image. However, for what I have in mind, it will not work (transparency on parts of one frame above another is as far as I can tell not possible).
    So how do I prevent images from loading until called for?  regards~bill-o

    t would help if you posted a link to the page, but I can guess that you have properly diagnosed the cause - the page is encumbered with the weight of all of the full-sized images.
    The only way to not have this happen would be to dynamically write the link to the full sized-images on demand, as it were.  In other words, the link ISN'T EVEN ON THE PAGE until you have clicked on the corresponding thumbnail, and only at that point is the weight of that image experienced.  One easy way to do this is to use the SetText of Container behavior that is part of DW's native arsenal of behaviors.  When the thumb is clicked, the SetText behavior is called to write the image link into the enlarged image's container. Need to see a demo?  Look here -
    http://dreamweaverresources.com/tutorials/settextoflayer.htm
    The behavior is called "Set Text of Container", and using it will meet all of your requirements.
    To use it, you will have to have the following:
    1.  A page with a 'container' which is to receive the enlarged image - this could be a table cell, a paragraph tag, a div, or even a span tag.
    2.  That container will have to be identified with an ID attribute and a valid value, e.g., <div id="enlargedImage">.
    3.  A dummy page containing each enlarged image, placed sequentially on the page.
    To implement the effect, do the following:
    1.  Open the dummy page in Code view, and select the first image's tag, e.g., <img src="images/foo.jpg" width="123" height="256" alt="whatever" /> (XHTML syntax shown here).
    2.  Switch to the actual page, select a thumb that will 'open' this enlarged image, and enter "javascript:;" (that's colon semicolon) in the 'Link' field of the Property inspector to make this thumbnail image a null link.
    3.  Apply the Set Text of Container behavior.
    4.  Paste the clipboard into the dialog for the behavior, and click OK to close the dialog.
    5.  Examine the Behavior panel to see which mouse event has been defaulted - probably 'onclick'.  If you would rather have this be 'onmouseover' use the Behavior panel Event selector (the dark triangle to the right of the event name) to select 'onmouseover'.
    5.  Repeat from #1 above until all thumbs have been treated.
    Let us know if this does not make sense

  • Errors preventing X from loading

    When i run startx, I receive two errors, which read:
    (EE) Failed to load module "speedo" (module does not exist, 0)
    (EE) AIGLX: Screen O is not DRI capable
    as best I recall, AIGLX is for ATI cards, and setting vesa to be the driver should prevent this from being an issue, which i tried.
    I have no clue what speedo is, and i've searched here and on the rest of the al's great internet, and am yet to find what this is. I searched X.org an's wiki and got zero hits. How can that even be possible?
    Im just trying to get X to work. Any suggestions will be appreciated and tried.
    Miesnerd

    Hey there!
    Well, although I can't remember having heard of the module "speedo" so far, I would try the following:
    It it likely that X is trying to load this module because it finds a load command in the config file.
    Open /etc/X11/xorg.conf in your favourite editor and look for a section called Module (Section "Module").
    If there is a line in this section looking similar to Load "speedo", try to comment this line out.
    (This is done with the '#' character (#Load "speedo").
    Then try to restart the X server and look what happens. Because X is throwing another error with AIGLX it may be necessary to comment this line out, too (something like #Load "aiglx" or so).
    Hope this helped a bit.
    Cheers,
    mfa

  • I cannot load certain games which I have always played. This has now been happening for over 2 weeks. Once in a while they will load, but very rarely. I checked my flash, it does allow 3rd party

    i cannot load certain games which I have always played. This has now been happening for over 2 weeks. Once in a while they will load, but very rarely. I checked my flash, it does allow 3rd party

    Upgrade your browser to Firefox 8 and check
    * getfirefox.com

  • Want o install various games which requires gyroscope to my ipad but it tells upgrade ios

    want to install various games which requires gyroscope

    I'm you have iOS 5.1.1 listed as your iPad's IOS version then I assume that it's a first gen iPad, in which case it doesn't have a gyroscope in it - you won't be able to install apps that require one

  • What's going on with JAVA, Can't load POGO games?

    Please let me know about JAVA.  I can't get POGO games to load and some chat rooms on other websites won't load ????

    Java 7 updated  for 10.7-10.8
    Released Feb 1, 2013,  fixes 50+ security flaws
    http://www.esecurityplanet.com/patches/oracle-responds-to-java-security-flaws-wi th-50-fixes.html
    Download and install
    https://www.java.com/en/download/faq/java_mac.xml
    For Java versions 6 and below OS X 10.5-10.6 machines
    Apple supplies their own version of Java. For Mac OS X 10.6 and below, use the Software Update feature available under the Apple menu to check that you have the most up-to-date version of Java 6 for your Mac.
    https://www.java.com/en/download/faq/java_6.xml
    Java SE 6 End of Public Updates
    After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. We highly recommend downloading and installing Java 7.
    If your considering upgrading OS X from 10.6.8 to 10.8 via AppStore to run Java 7
    Be forewarned no PowerPC based programs or driver software will run any longer.
    Check here BEFORE you upgrade OS X!
    http://roaringapps.com/apps:table
    Alternatives if you must run Java 7
    If Apple disabled Java 6 in 10.6, and you can't upgrade OS X to 10.8, then your pretty much done with Java in OS X because Oracle won't issue updates for Java 6 anymore.
    However you can install Windows 7 and continue to use Java 7+ there until support for Windows 7 ends in 2020.
    Windows in BootCamp or Virtual Machine?
    If your on 10.6, I very highly recommend the free Virtualbox for the virtual machine software as it gets updates, VMFusion and Parallels have moved on with only 10.7+

  • Cannot load pogo games on firefox.. just quit loading as of 8pm mon 8/29/2011 help

    have been using firefox for some time now.. on 8/29/11 was playing pogo games as usual.. about 8pm went back on the play pogo bowl and games wouldnt load. tried other games and only loaded one..
    got off and tried again later in the evening... no games would load..
    tried this am and still no games would load..
    checked with friend in Ill,, her games will load.
    pulled up Chrome.. games will load..
    reloaded newest ver of firefox 6.0.. games still wont load..
    have rebooted also..
    HELP!!!!! LOL
    may medley

    So in simple terms, the fix invovled ensuring the nvidia module is loaded before the bbswitch module. I'm not sure about the necessity of the things that follow but the fix may possibly also require removing bumblebee and possibly requires removing nvidia from repos and building the driver downloaded from nvidia.
    This fix could be completely unrelated to the problems I was having with arch but I cannot verify the fix on arch specifically cos I installed every distro under the sun trying to get it all working and I got it to work on a non arch distro.
    So... I'm not sure if I should really mark this a solved because I haven't/can't verify it on arch and technically the solution involved changing to another distro but in fact, I know it has absolutely nothing to do with arch since I saw the same behaviour on 3 other distros. If I have time, I will reinstall arch and verify but for the moment, I have a lot of work to catch up on now that I have a working nvidia driver I can actually use for dev
    Anyway, what I think is going on is there is some bizarre issue with bbswitch that stops the nvidia driver from being found because on the current distro I have installed, if I have no bbswitch, no bumblebee and no nvidia modules loaded or services running etc. I can modprobe the nvidia driver and all works fine. I can then modprobe the bbswitch driver and that works too. IF I modprobe the bbswitch driver first and then modprobe the nvidia driver, I get this error that says the nvidia module cant be found. The location it prints is in some updates directory whcih is odd too because I installed from nvidia source and never installed updates at all and made sure that there were absolutely no repo nvidia drivers or updates etc.
    Last edited by tim (2013-10-02 08:35:39)

  • Version 3.6.14 has a bug & does not support Java to play Pogo games - How do I install a earlier version?

    Pogo games plays on Java - the last version of Firefox 3.16.14 has a bug that does not support Java - I have been instructed by Pogo to install an earlier version of Firefox. How do I do that?

    Firefox 3.6.15 was just released to fix that Bug.
    You can use Help > '''Check for Updates''' to trigger an update to Firefox 3.6.15.

  • Java plugin for pogo games cant be installed

    i play pogo games and it now says a java plugin needed but when i install i still cant get into the pogo game,it keeps saying the same thing...java plugin needed....didnt have this problem before going to 4.0 firefox..........help

    Hi,
    Did you activate the JDK java for your browser in the java plugin config.
    Configuration Panel -> java plugin -> Advance -> Default Java for Browser
    Regards,
    Quickcga

  • Firefox 4 does not work with Pogo games at all!!! Plus do not like the layout at all either. This version really sucks!

    Firefox 4 does not work on any Pogo games, neither did the latest version of 3.6.14 and since downloading the beta version of 4 I've had nothing but troubles and pages either not loading or taking forever to load. I do not like this version at all.

    After trying everything else under the sun, I finally figured out that the problem was with the Adblock Plus program. Some of my games were not loading at Pogo.com, like Boggle, even though I made sure to clear all the caches and made sure my pop-up blocker wasn't on, the games still wouldn't work. Then I read something about Adblock Plus could be blocking some applets causing some games not to load properly and that's exactly what the problem was. The Adblock Plus preferences are found under the Tools button.I could've just disabled the Adblock Plus, but that made me a little nervous, so I just unblocked the items that were for the specific game that wouldn't load. To do that, I went to that particular game page where the room choices are. Not sure if you have to have Adblock Plus opened or not, but I did in a seperate tab. Then I hit cntrl + shift + V and it opened up the items that were blocked on Adblock Plus. The items in red are the items that are blocked. I just clicked on those to unblock them and the game loaded like a charm. Hope this info helps.

  • New i mac cannot load pogo games

    Have a new imac can not load pogo games

    I unpacked my new refurbished imac today (my first apple) and of course one of the first sites I went to was Pogo. None of the games I tried would load; they would say they were loading then poof. I googled to try to fix it and nothing I found helped. One site said check your pop-up blocker. I did that and popups were blocked but after I unblocked them it still didn't work. Another site said to update your java. I did that; still no go. I ended up fiddling with the java and exiting Safari and going back on and finally it worked. I'm not sure what exactly did it either. All I can suggest is fiddle with your Java.
    Not all the games work though, still can't use Word Whomp or Texas hold 'em.

  • Is there a way to prevent Mail from loading non system fonts?

    For over a year, and a system OS upgrade, Mail has been taking 7 - 10 minutes to load all the thousands of fonts I have on my computer for graphic design. This started with Snow Leopard on my 2009 Mac Pro (10 GB RAM, 2 TB HDD). At first I didn't know why the computer was taking such a long time to finish boot up. So I reformatted the drive--zeroing it out. Then I installed Mavericks and reinstalled everything else. Finally I tried logging the system activity during startup and noticed that something to do with fonts took up the biggest chunk of this time. Because Mavericks loads any programs you leave running at shut down, I saw that if Mail had the fonts window open, the list of fonts would slowly grow, filling up with the many font families I use for my work. I called tech support for my font management utility but they say the fonts are not in the system and and shouldn't affect the system during startup. In the end I gave up and just go drink a few coffees after hitting the start button. It's like going back to the early days 25 years ago.
    Can I stop Mail from loading any non-system fonts? I never use anything but the default font.

    Hey SchenkerBob,
    It is possible to disable non-system fonts temporarily for all applications using the Font Book application. This article explains how to do so -
    Mac Basics: Font Book - Apple Support
    In particular -
    Disable and enable specific fonts
    In situations where you'd like to prevent a font from being available in applications, but you don't want to completely remove the font from your Mac, you can use Font Book to disable the font.
    In Font Book, click "All Fonts" in the Collection column.
    Click the name of the font in the Font column.
    Choose Disable "Font Name" Family from the Edit menu.
    Since it might be problematic to have to disable each font individually, you can create a collection of fonts and disable the collection. See the article for how to create a font collection -
    Organize fonts as collections
    When working with fonts, you may discover that you use certain fonts frequently, but rarely use others. To make it easier to find the font you are looking for, you can organize your fonts into collections.
    From the Font Book File menu, choose New Collection.
    Type in a name for the new collection.
    Click "All Fonts" in the Collection column.
    Drag the fonts that you want from the Font column onto the name of your new collection in the Collection column.
    You can then disable collections of fonts -
    You can also disable or enable all fonts in a collection: Click the name of the collection in the Collection column, then choose Disable "Collection Name" or EnableCollection Name" " from the Edit menu. 
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • How prevent movie from loading completely before playing?

    Hi,
    how do I prevent an swf from loading completely before
    starting to play in the browser? When simulating a download in the
    Flash application, several preload stages work perfectly, but not
    in the browser. Preload stages don't appear, instead it takes ages
    for the 3.5 mb file to completely load before displaying the first
    frame of the movie.
    I have tried inversing the load order in export settings and
    different flash versions, but just can't get it to work.
    Can someone help? Thank you!

    hi kglad
    I thought it should be that way; the point is that I don't
    want to add code that loads the entire movie before starting to
    play the first frame, but only a certain number of frames (i.e. 11
    out of 35, for example). I'm trying to do this with this code in
    the first frame:
    ifFrameLoaded (11) {
    gotoAndPlay("start");
    in the simulation, it works perfectly, but when uploading the
    movie and viewing it in html, the entire thing loads, and the
    preloader doesn't appear.
    Many thanks for your help.

  • BUG: IE11, windows 8.1 enhanced protected mode prevents pages from loading. Slow browsing experiece

    if enhanced protected mode is enabled in IE11 on windows 8.1 it prevents many pages from loading in a timely manner.
    eg. TechNet.microsoft.com; dotnetcurry.com
    this is reproducible on multiple machines.
    please resolve.

    Hi,
    Based on my test, it works fine on my windows 8.1 with IE 11.
    Firstly, we need to check the following:
    1.  Do you mean the issue is only occurred when you enable the enhanced protected mode?
    2.  How about other browsers? Do they also meet the same issue?
    3.  If there is a computer on the other network, please check if it also meets this issue.
    Please try the following to check the issue:
    1. Disable the security software temporarily and see if it works.
    2.  Reinstall the IE 11 for a test.
    How to reinstall or repair Internet Explorer in Windows 7, Windows Vista, and Windows XP
    http://support.microsoft.com/kb/318378/en-us
    As Real McCoy mentioned,  the recording can be used to quickly identify problems and help reduce time spent with the help desk.
    Please upload “Problem.zip” to SkyDrive (http://www.skydrive.live.com/) and share its URL with us.
    More information about Problem Steps Recorder:
    Problem Steps Recorder
    http://technet.microsoft.com/en-us/windows/dd320286.aspx
    Hope it helps.
    Regards,
    Blair Deng
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Disable every single web fonts in adobe muse and prevent it from loading open-sans:n3:all.js

    I'm using Adobe Muse 2014.2 to build a Chinese site. The audience of the site is mainly people in mainland china, and I'm using a server from Hong Kong. Recently I just tested the site, however, it was loading extremely slow. In the end I found out that the cause of the slow loading was due to a file called "open-sans:n3:all.js" that was loaded from adobe webfonts.
    Because a lot of sites are blocked in China, I think that Adobe Web Fonts (or typekit) is also blocked thus can't be loaded properly, causing the entire site to slow down.
    Is there a way to disable all the webfonts in Muse and to prevent my site from loading this file?
    Or is there a way I can host this file on my own server?
    Thanks in advance.

    This was a snapshot that my friend in China sent to me. You can see that the open-sans:n3:all.js is taking extremely long to load.
    Yet the funny thing is that I did not use any web fonts in my site. However Muse is still adding it in the code for some reason.

Maybe you are looking for