Firefox keeps failing and then goes into a recovery mode???????

Firefox keeps sending messages that it has failed and it will restart itself and attempt to recover.

Does Firefox crash or only fails to start properly?
You can check if you can start Firefox in [[Safe Mode|Safe Mode]] by holding down the Shift/Options key.
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the about:crashes page and see all crash reports.
If necessary then you can open about: pages via the location/address bar.
If a report doesn't have the "bp-" prefix then click its line on the about:crashes page to submit the crash report and the crash report will get a "bp-" prefix (do not add it yourself).
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox, see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
*https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

Similar Messages

My (2008) macbook pro, running 10.5.8 runs for about 30 seconds and then goes into deep sleep mode. After significant difficulty awakening, it runs for 30 seconds and....start repeating here. It did this once before about a year ago.

.....and then goes into deep sleep mode. When it (finally) awakens....it runs for about 30 seconds and.....start repeating here.
And yes, I've shut dwn and restarted multiple times, rebooted in terminal mode and run fsck, rebooted and reset the parameter ram, yadda-yadda......
Anybdy got any ideas?

Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Still having problems? Replace steps 6 and 7 with the following:
Reconnect just the MagSafe power adapter.
Press the power button to turn on the computer,
Then reconnect the battery.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode

KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode I got this today today and when i tried to complete initial set-up. it never completed. TV is going in cycles with initial set-up everytime it connects to my internet and says connected successfully. after it tries to update software and tv restartssame initial set-up screen again i tried keypad button on remote and it took me to tv. i was able to see tv that way but whenever i start tv, it goes back into initial set-up again. any solution for this?

Hi GC_Sugarland,
Thank you for considering Sony Community!
I'm sorry to hear that this happens to your TV after the update. Pleas reset your the TV to the original setting. click on this link to guide you on how to reset it.
I hope this helps. Please keep me posted.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Long tone on start up and then goes into open firmware

I stumbled upon the older posts here and thought I'd add a solution.
http://discussions.apple.com/thread.jspa?messageID=6115258
It was about an emac starting up with a long tone and the led flashes a few times and then goes into Open firmware, and when doing "mac-boot" in open firmware, it attempts to start, shows the apple symbol, the screen goes dim and crashes.
It could be a bad power switch. To confirm - you can remove the emac case, be careful not to touch the motitor's picture tube. Find the cable to the power switch; with a small wire just touch together the black and red wires on the power switch cable (or it might be red and green). This will start the emac. If it boots up and runs OK then the power switch was bad. Not sure where to buy a new switch. I soldered and glued my switch together.
<Edited by Moderator>

Or, you'll find both the short pigtail-cabled nVidia graphics driven power switch and the version with a longer cable used with the AIT graphics driven models here* for a good deal less.
Note that the later ATI version can actually be used with either product generation.
*I may receive compensation as a result of parts or services being ordered by users specified at the link shown in this message.

New LG Monitor Screen Image Keeps Shifting a few pixels left and right / goes into power save mode

I just purchased a new LG Computer Monitor from Best Buy today and hooked it up to my PowerMac computer. Shortly after setting it up, the entire screen image started sporadically shifting left and right a few pixels. And then, at seemingly random times, it'll shut itself down, going into power save mode. I checked the cables to make sure they were secure and they seem to be. Could there be some sort of interference that's causing it? Or would it be the graphics card? My computer is only a couple years old. Please help!

Do you have another computer you can plug the monitor into to test?
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

My Macbook Pro will not boot up. I can hear the sound that it has started and then goes into an infinite loop.

My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.

What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
Clinton

Firefox keeps crashing and then I cannot use ANY browser without restarting my computer!

I have Firefox version 18.0.1 on a PC running XP. I love firefox and it has always been my favourite browser but for the last few months, it keeps freezing on me and then I have to force it closed (end program). After that I cannot restart it (or ant other browser on my PC) unless I restart my computer!
This is becoming a real pain - I have done loads of malware and virus scans and nothing has come up. I really don't get what the problem is - any plugins that Firefox detects are not compatible with the current version are disabled, so that can't be the issue.
Please help - I don't want to have to stop using Firefox.
If it helps, I have noticed this most when I try to log into my bank (with or without other tabs open) - I click log in and it freezes. The last time it happened, I was trying to log into ebay although I don't think it has only ever happened when trying to log in and it certainly doesn't happen to every website I try to log into.
Ignore the system info - I wrote this on my tablet while waiting for my computer to load up after the latest FF crash!

Just saw this: http://support.mozilla.org/en-US/questions/944193
I contacted Rapport and tehy seem to think that this is updated in the latest version (even though ht econsole said I had the latest version) so will give it a try. Fingers crossed

Twitter App (From Firefox Marketplace) opens, and then goes blank.

I am running the latest Firefox on a Moto G running Android Kitkat (Android 4.4.4).
I installed the Twitter App from the Firefox Marketplace at https://marketplace.firefox.com/app/twitter . I installed following the instructions at https://support.mozilla.org/en-US/kb/install-android-apps-using-marketplace .
When I open the App, a green screen with a Twitter/Android-ish logo appears, and then the screen goes blank.
The Twitter Marketplace App does not work. How can I get this App to work?

Make sure that you are using the '''"Remember History"''' setting as described in this article -> [[Options window - Privacy panel]]
Check and tell if its working.

I installed Spyware Doctor with antivirus and Firefox will not open but goes into Not Responding mode

After installing PC Tools spyware doctor with antivirus Firefox will not launch. I get a black screen with a not reponding message at the the top. I have tried an earlier version of Firefox (5) and this launch OK until I closed it and then it too refused to launch.

Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.

My iPhone 3gs is shutting down and going into un-recovery mode?? : (

Hi, its my first time on here, due to the fact that I have never ever had any problems with my iPhone 3gs.
Until 3 weeks ago.
It all started when my e-mail decided that it was going to be difficult. so I go to restart my iPhone and my screen lock/ power button does not respond at all. then the trouble ensues.. two days later, (after I ran the battery to nadda so it would turn off) and was fully charged, my phone cut out while I was sending a text. I was connected to wifi. the cell service bars were gone, and 3-5 seconds later my wifi disappeared also. at this point I was thinking dude? and the touch screen was still functioning. so I checked the network settings and my screen became unresponsive. my phone then went instantly to a black but still lit screen and then was off. my lock button still would not work so it wouldn't turn on with that, so I hit the home button and it showed a screen with a iTunes symbol and a USB cord, and a slide for emergency call bar. also there was a little quetion mark circle thing so I tapped it and a screen with two four letter acronyms and a number set for each showed up. long story shortened, I call apple and am on the phone with them for 5-6 hours over the next two weeks. they were of absolutely no use, and proceeded to lay into me about how I am using too much data.. and that my phone is probably not going to be fixable.
I get it to work by popping my sim card and restoring it then puting it back in and factory reset it with the sim card in it.
I get it working again and it is fine until last night. same exact thing.
what can I do?? im lost.
Information that might help..
my phone has had around 200+(10-30) gigs run through cellular data (3G)
about 450 gigs total including wifi. X (
has never been jailbroken, dropped, opened, water damage etc..
current i tunes/iphone updates.
windows 7
iTunes 64 bit
AT&T
will post more info if you want to help ..
THANK YOU!!!

If I was in your shoes, I would choose to restore the iPhone with iTunes and then choose to NOT restore a previous backup. I'd then go on to set up the phone as though it were totally new, and choose the stuff to load onto it.
The reason I'd go through that trouble.. even though it meant losing a lot of settings and having to set stuff up again .. is because I wasn't sure I could trust the backup that it's restoring from.
If you have trouble again after doing the fresh reload -- especially if it's soon after you do it -- you may have a hardware issue with the phone, such as faulty flash memory or a processor chip that's failing. If that's the case, you'll want to consider your repair/replacement options at that point.

Windows does not start and cannot get into safe recovery mode

Had a blue screen and when I start up Windows wants to run in safe mode. But this runs for a few seconds and then stops with a blank screen (have left this for over 2 hours).
If I select to start windows normally then the system just reboots to the windows repair screen.
I do not have a recovery disk as Windows vista was pre-installed. Any clues ?

Hi,
The possible reason is that Windows bootmanager or the system files are corrupted. You say that you haven't made a recovery disk, but what about Hdd image recovery (pressing F8 on startup)? If it's already removed, you have to:
1. Order the recovery disk https://backupmedia.toshiba.eu/landing.aspx Note, it's not free
2 Get a copy of Windows vista and install it. Then, download the all necessary drivers and enjoy it.
Greets

Screen goes blue and then goes back to login mode

This is happening on a couple of imacs in our department. It's happening a couple of times a day just randomly.
any suggestions? I searched other posts to see if I could find an answer.
Thanks

Hello Amin Najib Zadeh,
Because you have tried multiple times restarting your iPad with it still going to a blue screen, then check out the article below to restore your iPad. Make sure to set it up as a new device and test it out.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Regards,
-Norm G.

I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard. It was totally updated with the latest from Apple when I bought and tried installing Lion. The upgrade failed, shot my OS and I couldn't boot. Had the constant spinner on a grey screen.. did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck. Crashed my system one too many times. I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac. I have the stuff running on my Mac Pro but have yet to notice anything impressive. I've always used F3 and really didn't require Mission Control. Just open you app folder for launch pad... duh? I use the hot corners anyhow. As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow. I don't like the new Mail either..
As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding." Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

Do you have a back up?
If you're just trying to recover the photos you can do that much more simply:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
Your photos are inside - these are the originals as imported from your camera.

Why does CC start verification process every time I open it? It even starts asking for license key and sometimes goes into trial mode.

When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.

Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium

Firefox keeps failing and then goes into a recovery mode???????

Similar Messages

Maybe you are looking for