Firefox loads pages much slower than Chrome

Recently switched back to using Firefox as I wasn't finding the extensions I like for Chrome only to discover that Firefox is running significantly slower by comparison. Tried uninstalling/reinstalling and it hasn't helped.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Similar Messages

Firefox 4 is slow in loading web pages, much slower than previous version. WHY?

I am having problems with slow loading of pages, slower than Explorer for the same page for example.
What can be done?

Have you tried (1) restarting your router, and (2) resetting the wifi on the iPad? To do #2, go to Settings, General, Reset, Reset Network Settings.

Why is Firefox about 5 times slower than chrome on same tablet?

Hei, I love the idea behind firefox, but as mobile browser it feels very slow.
Using the zimbra ajax email client, firefox mobile on a powerfull sony xperia tablet z takes 25s to start up, and even then, usage is laggy. Chrome on the same device starts in 5s and works smooth.
About the same results I get with http://tagesschau.de firefox mobile takes several seconds to display the page readably, while chrome gives the wanted results immediately. I even deleted all history and private stuff, and don't use any addons in firefox, as I read at your help pages, but firefox feels far behind in usability compared to chrome.
Best regards,
Heiko

Are these numbers pertaining to the first request only. Actually there has been quite a lot of changes in classloader and jasper compiler etc,. in sp4. Infact sp4 is proved to be much faster than earlier versions (Though I donot have exact figures with me, sp4 is faster than sp1). But some times it also depends on the settings like the debug level, type of session(lite or distributed) etc. At this time, as you are using only the defualt set up, I suggest you to try with other samples and verify is sp4 really 7-10 times slower than sp1. And then come up to a conclusion.
After having tested with multiple samples, with the "same parameters" on both the service packs, Still if you feel sp1 is faster or any further queries please get back to the forum. Please provide information about your settings also, so that I can investigate.
Thanks,
Rakesh.

Firefox loading pages really slow

So a lot of pages are loading really slow like minutes, like youtube and hot.ee mail service and a lot more. It started to happen when i updated to 20.0. Looked up some suggestions and found that about:config network.http.keep-alive to false help. And so i did it and it worked, but next time i opened firefox again it was slow loading again, but keep-alive is false still, disabled all not nessecary plugins and extensions and i dont seem to find a solution. Been a firefox user for a long time and dont want to change my browser.

I tried every suggestion, and still had VERY slow page loads (minutes!) for some websites.
The strange part was that [http://www.clickster.com Clickster.COM] would load quickly if I typed '''clickster.com''' into the address bar, but would take minutes if loading from a link or bookmark whose url was '''http://clickster.com'''.
After trying everything, here was the still slightly unsatisfactory solution (Firefox 22.0):
(1) Type '''about:config''' in Firefox address bar.
(2) Promise to be good.
(3) Change '''network.http.keep-alive.timeout''' from 115 to '''0'''
(4) Change the link or bookmark url to [http://www.clickster.com www.clickster.com]
Note that neither Chrome or IE have this bizarre behavior, and load instantly from a link, bookmark, typed-in url, with or without the '''www'''. There is still a serious Firefox bug.

I using FF-5-Stable. It much slower than Google Chrome 13. & crash during upload ??

I using FF-5-Stable. It much slower than Google Chrome 13. & crash during upload ??
it takes too much time to open a page.
Always Crash during upload..for big or small file..
It hangs and closed through Task manager or Reboot...

1. What are you "uploading"?
2. Have you tried a new Profile? Profiles don't last forever, and after going through a few major version updates "things" slow down, depending upon how much stuff the user has added to Firefox. Personally, I have created a new Profile for every new version of Firefox I have installed, up through Firefox 4.0. Didn't do that for Firefox 5, and probably won't for Firefox 6, due to the new fast release schedule and the fact that Firefox isn't being changed as much from one version to the next as it used to be changed under the 10 to 14 month intervals between major versions.<br />
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

Why does this forum perform much slower than form forum in metalink?

I feel strongly that this forum performs much slower than the form forum in metalink where there are even more active and more issues created there.
I don't know why Oracle creates two form forum, which one is faster and another one is slower.
What is the difference b/w them besides here is jsp pages and over there is plsql pages?

Oracle certainly allows you to have users that do not have roles. Or users that don't have any system privileges. Or users that don't have any object privileges.
If you want the query to return a row for every row in DBA_USERS, you would need to outer join all the other tables to DBA_USERS.
Justin

ACR processing in CS6 much slower than CS5

A big advantage of hosting ACR in 64 bit CS5 vs in bridge was that then ACR would process multiple images at once when saving them to jpg which would reduce processing times by 30% or more. For some reason this doesn't seem to be the case with CS6. I just did a short test and CS6 won't process multiple images at once, and was 33% slower than CS5 at saving a batch of 5dmkii images to jpeg.
Has anyone else noticed this? Hopefully this limitation is due to beta status and the final release of ACR will be fully optimized for 64bit processing.

It seems strange that their is hardly any improvement in 64 bit cs6 speed vs 32 bit cs5.    I agree, gpu support for acr would great!
Date: Wed, 11 Apr 2012 15:25:25 -0600
From: [email protected]
To: [email protected]
Subject: ACR processing in CS6 much slower than CS5
    Re: ACR processing in CS6 much slower than CS5
    created by Noel Carboni in Photoshop CS6 - View the full discussion
Bridge in CS5 was 32 bit only, and I observed the 32 bit converter as run by Bridge (or Photoshop 32 bit) wouldn't exercise all the cores, so the way I interpret your numbers is as follows:
1. ACR7 is 50% slower than its predecessor (34.25 seconds when run in Photoshop 64 bit vs. 22.59).
2. Bridge is now 64 bit, so you're running the same code in both cases, which is why you're seeing essentially the same number in Bridge as Photoshop.
-Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4328297#4328297
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4328297#4328297. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Computer loading pages too slow. How can I fix this?

Computer loading pages too slow. How can I fix this? When I go to iMac Manuals a gey/black screen appears. What is going on with this?

Unfortunately you haven't provided any useful information, such as what iMac you have, which version of OS X is installed, the capacity of the HD and how much is still available, etc...
Please complete your profile so we can begin to assist you, without that critical information we are guessing.

Preview takes forever to open, much slower than on my old MacBook. It has been like this since I bought the computer last January. Why is Lion so much slower?

Preview takes forever to open, much slower than on my old MacBook running Snow Leopard. It has been like this since I bought the computer last January. Any ideas?

Take it to an Apple Store for testing. If you don't get immediate satisfaction, exchange it for another one, which you can do at no cost, no questions asked, within 14 days of delivery.

PS CS3 much slower than CS2 on Intel Mac. I don't get it.

Yes, very very strange.
I work with very large files, so I just got a spiffy new Mac Pro. It's my first Intel machine, so I expected that CS2 would drag a little bit, due to Rosetta. In fact, moving from one processor to eight of them seems to have much more than compensated. Nevertheless, I ordered CS4 and while I wait I downloaded the demo of CS3.
I expected that CS3 would fly (no Rosetta) but have found my test tasks taking an inordinate amount of time... much slower than CS2 on the same Xeon workstation, and slower than CS2 on my old iMac (single 2.1GHz G5)
Since I work with extremely large files, I got a hardware RAID5 made up of four 15,000RPM SAS drives. I can't get enough RAM to avoid using scratch disk, so I attacked the biggest performance bottleneck. I did get 8GB of RAM; would have gotten more, but I read that it won't matter until CS goes 64-bit in CS5 at the earliest.
The rest of it: dual quad-core 2.8GHz "Woodcrest" Xeon processors, NVIDIA GeForce 8800GT graphics card, OS X 10.5.5, all updates (Apple and Adobe) applied as of 6pm Wednesday October 8th.
I'm running two tests as my benchmark: open a file (PSD created with CS2, 75" x 75" at 400ppi, two layers, RGB with one additional channel) and resize to 75" x 75" at 800ppi. Once that is done, I rotate the new, massive file counterclockwise 18.5 degrees.
On my old setup, 2.1GHz SP G5 iMac with CS2, these tasks took 38m 30s and 1h 33m 22s respectively.
New machine with CS2: 10m 09s and 29m 14s respectively
New machine with CS3: 42m 38s and 1h 36m 24s
(above tests run repeatedly: these numbers are the fastest numbers for each configuration)
I have nothing else running for these tests, except for Activity Monitor. What I've observed with Activity Monitor: the old G5 was pegged at (or very near) 100% CPU the whole time. Mac Pro with CS2, Photoshop ran most of the time on one CPU at a time, but spiked up as high as 250% CPU usage just for Photoshop.
I haven't seen Photoshop CS3 use more than 80% of one processor the whole time on the Mac Pro. Mostly it sits around 35%.
One more informal test: if I open that same file and downsample from 400ppi to 200ppi, CS2 does it in 1m 40s. CS3: 6m 57s. I don't have the iMac any more so I can't tell you how long it would take there.
In both CS2 and CS3 the scratch disk is my startup volume, but it's a RAID. I can't add any more drives except for external drives. I could have configured it to one dedicated system drive and a second scratch volume made up of the remaining three drives, but I consulted with people who know RAID better than I do who agreed that since everything is going through the SCSI controller and everything gets written to multiple drives in order to make it faster that I'd get a performance hit by splitting the RAID into two volumes, even if multiple processes are trying to get at the same drive array. Even adding a Firewire 800 drive for scratch would be slower than using the RAID. Or so I've been told.
So, this seems absurd. CS3 is not using Rosetta, right? So it should be flying on my machine. What on earth could I have done to a fresh CS3 (demo) install to make it slower than CS2 on my old G5? Is the CS3 demo crippled? Is there a conflict having CS2 and the CS3 demo on the same machine?
I'm stumped.

>Ya see, this is the attitude you really, really should get over. The Photoshop CS3 (10.0.1) code is just fine... it's your system (hardware/software) which, for some reason is not providing an optimal environment.
Jeff, I agree completely. You seem to be assuming that I actually think Adobe wrote bad code. In fact, I believe Adobe did NOT write bad code (and I wrote that) but that the condition that you are suggesting (CS3 being slowed by having having scratch and system on the same volume to a far greater extent than CS2) could only be caused by bad code by Adobe. Since I believe that, as you say, a universal difference of this magnitude between CS2 and CS3 would be noticed by huge numbers of users, I doubt that what I am seeing is the result of having scratch and system on the same volume.
In case I'm being less than clear:
Scratch and system were on the same volume for CS2.
Scratch and system were on the same volume for CS3.
On my system CS2 performs tasks three to four times faster than CS3.
ergo, either there is some problem other than scratch and system being on the same volume (perhaps something that exacerbates the scratch/system/same volume issue, OK, I accept that possibility) or else the change has been between CS2s and CS3s handling of scratch disks.
If for the sake of argument we rule out the possibility that CS3 handles the condition of scratch and system being on the same volume worse than CS2 does, the only possibility left is that there is SOMETHING ELSE WRONG WITH MY SYSTEM.
I am trying to find out what that other thing is. You're the one insisting that scratch and system being on the same volume is the cause of the CS3 slowdown. Accusing me of not believing that there's something wrong with my system misses the mark entirely. I ABSOLUTELY believe there is something wrong with my system.
> Your RAM tests sound pretty thorough, but if I had your large-files workflow I would buy two (or preferably 4) 4-GB sized matched RAM DIMMs, remove all the existing RAM, and install only the new RAM to further test whether or not the old RAM is anomalous.
Thanks Allen,
Actually, this is exactly what I've done, though in a different order. My system shipped with two 1GB chips. I bought two 4GB chips from OWC and installed them, and found my CS2 performance to increase significantly. It was only then that I tried installing the CS3 demo. When I found CS3 running my tests more slowly than expected, I pulled the new RAM out and tried with just the original 2GB and tested both CS2 and CS3 again. Then I took the original 2GB out, put only the new RAM in and tested CS2 and CS3 again, finding the same results. Currently I have all 10GB in the system and for the moment I'm setting aside the possibility of a problem with the RAM (or at least setting aside the possibility that the RAM chips are just plain bad) because that would indicate that both the new and the old RAM are both bad in the same way. That seems unlikely.
So I guess I'll have to drag the system down to the Genius Bar if I don't see an improvement from rearranging my hard drives.
The update there is that last night I backed up my system, and this morning I deleted my RAID5 set, blowing away everything on my system until I can restore from backup. The new configuration is 1 JBOD drive plus three drives attached as RAID0.
Unfortunately, neither of the new volumes is visible when I go to restore from backup. For the moment, this little experiment has cost me my entire system. The upshot is that it may be some more time before I have any more information to share. Even when I do get it working again, I can expect restoring to take the same 12 hours that backing up did.
I will certainly post here when I've got my system back.

To run a piece of PL/SQL code, in TT is much slower than in ORACLE.

A piece of PL/SQL code , about 1500 lines, package is named rtmon_event, function in it is named rtmon_SHOLD_CUS_RPT;
the PL/SQL code is run in ORACLE.
Now I want to get fast speed, I think of TT.
I rewrite the PL/SQL code by grammer in TT.
But the speed in TT is much slower than the speed in ORACLE.
In ORACLE, to run the PL/SQL code, it need 80 seconds; but In TT, to run the PL/SQL code, it need 183 seconds;
How can I resolve the problem?
Btw: there are some joins of 2 tables, or 3 tables in rtmon_event.rtmon_SHOLD_CUS_RPT, and some complex DML in it.
The run method is :
declare
a number;
begin
a := rtmon_event.rtmon_SHOLD_CUS_RPT ;
end;
Thanks a lot.

The easiest way to view a plan is to use ttIsql and issue the command:
explain SQL-statement;
For example:
explain select a.ol1, b.col2 from taba a, tab b where a.key = b.key;
See the documentation that 'hitgon' pointed you to to help you interpret the plans.
Chris

In CS6, JavaScript Running MUCH Slower than ActionScript

Hi All,
I am finding that in CS6, JS code runs MUCH slower than ActionScript code. I don't want to double-post here - Full details may be found where I posted them in the InDesign Scripting forum at - CS6 JavaScript Running Much Slower than ActionScript, before I realized that this forum might be more appropriate.
The basic gist of it is that I had a Flex/ActionScript Extension, which I obviously needed to start converting to JavaScript in advance of the next version not supporting ActionScript. I converted 20,000 lines of my business logic code from ActionScript to JavaScript (grrr...) - only to find that it now runs 5 times slower than it did in ActionScript.
What has been the experience of others who have converted large Extensions from ActionScript to JavaScript?
I would greatly appreciate any and all suggestions.
TIA,
mlavie

Hi All,
I am finding that in CS6, JS code runs MUCH slower than ActionScript code. I don't want to double-post here - Full details may be found where I posted them in the InDesign Scripting forum at - CS6 JavaScript Running Much Slower than ActionScript, before I realized that this forum might be more appropriate.
The basic gist of it is that I had a Flex/ActionScript Extension, which I obviously needed to start converting to JavaScript in advance of the next version not supporting ActionScript. I converted 20,000 lines of my business logic code from ActionScript to JavaScript (grrr...) - only to find that it now runs 5 times slower than it did in ActionScript.
What has been the experience of others who have converted large Extensions from ActionScript to JavaScript?
I would greatly appreciate any and all suggestions.
TIA,
mlavie

Anyone else? CS4 running much slower than CS3?

I just upgraded to CS4 from CS3. All of the applications are running much, much slower than CS3, particularly InDesign. My computer is literally fresh out of the box; specs below. Software and patches up to date. Thinking of uninstalling CS4 and reverting back to CS3. Any suggestions/feedback?
MacBook Pro 15"
2.66GHz Intel Core 2 Duo processor
4GB memory
320GB 5400-rpm hard drive
NVIDIA GeForce 9600M GT graphics processor with 256MB
1440 by 900 pixels
Snow Leopard OX
Purchased CS4 Master Collection. Other software installed includes iLife, iWork, Office for Mac.

I'm not using In Design yet, but for Photoshop and Acrobat my sense is that they are fast or faster than CS3, and Snow Leopard has reduced the launch time for all my apps compared with Leopard.
Yes there are issues with running Adobe apps with Snow Leopard, but some of them are the same issues when running CS3 apps with Leopard--and in any event, these are, I believe, all crashing bugs, not things that slow down responsiveness. I personally have had only a few problems with Design Std CS4 apps + Snow Leopard.

Can iMac be updated or just get new one? On iMac with OSX10.5.8, 2Ghz Intel Core 2 Duo--it's so much slower than iPad. It hasn't had cache cleaned or "First aid". I'm wondering if a computer store/techie can clean/update it or better to put $$ towards new

Can iMac be updated or just get new one? On iMac with OSX10.5.8, 2Ghz Intel Core 2 Duo--it's so much slower than iPad. It hasn't had cache cleaned or "First aid". I'm wondering if a computer store/techie can clean/update it or better to put $$ towards new?

If you want to clean up your hard drive some, here are some of my tips, also.
Hard drive getting full or near full?
Do a search for and downlaod and install OmniDisk Sweeper and OnyX.
Here are some of my tips for deleting or archiving data off of your internal hard
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive older emails you want to save to disc, Flash drive/s or to ext. hard drive.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, Flash drive or ext. hard drive and/or delete any old documents you no longer use or immediately need.
Uninstall apps that you no longer use. If the app has a dedicated uninstaller, use it to completely uninstall the app. If the app has no uninstaller, then just drag it to the OS X Trash icon and empty the Trash.
Also, if you save old downloaded .dmg application installer files, you can either archive and delete these or just delete the ones you think you'll never install, again.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its thing initially, then go to the cleaning and maintenance tabs and run all of the processes in the tabs. Let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
If you have any other large folders of personal data or projects, these should be thinned out, moved, also, to the external hard drive and then either archived to disc, Flash drive or ext. hard drive and/or deleted off your internal hard drive.
Good Luck!

Why is my iPad loading pages real slow?

Why is iPad loading pages so slow?

iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
 Cheers, Tom

Firefox loads pages much slower than Chrome

Similar Messages

Maybe you are looking for