Firefox main window goes black and all tools disappear.

Occasionally the Firefox main window will go black and all tools disappear.
It ends up with a black window, a blue frame, and the three buttons in the top right corner (minimize, maximize and close). If any audio (or video) is playing, the sound continues. If I click the X at top right to close it, it closes and when I restart it everything is ok. See the screenshot below.
This only happens once a day or so. I have no way of predicting it other than I'm usually scrolling down the page when it happens. It has happened in safe mode.
I'm using the most recent Firefox, 33.0.2, on Win 8.1 on an i5 system with 8G RAM.
<img src="http://i.imgur.com/Awx1fD0.png"/>

Try to disable OMTC and leave hardware acceleration in Firefox enabled.
*layers.offmainthreadcomposition.enabled = false
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Similar Messages

  • Firefox 21 whole window goes black after being opened for a few seconds

    After most recent update (21 I think), Firefox window goes all black - no buttons, anything, a few seconds after opening. Sometimes it'll last a few minutes before going black. Start menu remains so I can minimize it, close it, etc. Audio if playing on the page will continue to play after blackout. Tried all basic tricks including uninstall/reinstall.
    Windows 7 64bit ATI Radeon 5XXX 4gb ram. Other browsers work fine. All else seems to be fine with Firefox before it goes black.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • I just upgraded to 10...and now links and buttons black out when my cursor moves over them, and my entire window goes black whenever I scroll.

    I just upgraded to Firefox 10 and had to go back to 3.6 because 10 doesn't seem to work on my computer. I have a windows 7 pc. After upgrading, whenever I moved my cursor over a button or link, that link blanks out or a black bock appears over it. Additionally, whenever I try to scroll, the entire window goes black until I stop scrolling.

    Hi Nester88,
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit.
    Hopefully this helps!

  • Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

    Imac 27" Intel Core7  CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

    I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
    So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

  • My keynote seems to be misbehaving. Me, a teacher was preparing a ppt on keynote.all of a sudden, the navigator column to my left goes black and nothing seems to move. Please help! Only 12 hours before I take class.

    My keynote seems to be misbehaving. Me, a teacher was preparing a ppt on keynote.all of a sudden, the navigator column to my left goes black and nothing seems to move. Please help! Only 12 hours before I take class.

    Hi KRKabutoZero,
    Welcome to Apple Discussions
    You may want to look at Knowledge Base Document #58042 on A flashing question mark appears when you start your Mac.
    Do you have access to another Mac? You may want to backing up your files via Target Disk Mode (TDM) as well as running some utilities (Knowledge Base Document #58583 on How to use FireWire target disk mode.
    You may want to invest in a utility like DiskWarrior from Alsoft. It is great for troubleshooting drive malfunctions.
    As said before, you may also want to bring your iBook to your local Apple Store/Reseller.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Every time I try to download Adobe Flashplayer (and other downloads) my window goes black. Any thoughts?

    Every time I try to download Adobe Flashplayer (and other downloads) my window goes black. Any thoughts?

    Make sure your computer id's athuorized, and not past the allowed 5 units

  • Firefox windows go black, and/or firefox crashes

    My Firefox screen frequently goes black (sometimes it feels like it is initiated by scrolling, other times it just happens without any seeming input). The screen will flicker without a discernible pattern and sometimes go back to normal, but not often. Most times firefox just crashes. Crashes also occur regardless of the black screen issue. Typically, my FireFox is crashing every few min. It is basically unusable.
    here are my last 10 crashes:
    bp-2a7d1aa6-30c0-49f5-acde-1f2702141009 10/9/2014 12:52 PM
    bp-710c4dbc-84a8-4b8f-a915-381a12141009 10/9/2014 12:26 PM
    bp-fc5c79f9-b446-47fc-9163-af2552141008 10/8/2014 6:20 PM
    bp-da748cb1-4b1d-494f-9918-438842141008 10/8/2014 6:16 PM
    bp-68713c84-944b-412f-9807-7c94d2141008 10/8/2014 5:13 PM
    bp-6d0d53ad-2ce3-42a5-9026-3271d2141008 10/8/2014 5:05 PM
    bp-4fda6a6d-1877-4b2b-8521-842a52141008 10/8/2014 4:39 PM
    bp-ed510e47-8410-430d-ac70-28c1a2141008 10/8/2014 4:23 PM
    bp-3e6f6354-b84a-4e6d-a039-7a12e2141008 10/8/2014 4:20 PM
    bp-7f5905fb-64fd-46c5-834e-947192141008 10/8/2014 4:15 PM

    Do you have omtc enabled in about:config?
    It looks like an old bug is associated with it and the last patch decreased the frequency of crashed. However it does not mean it has fixed for everyone.
    Since it is unstable can you please try the following troubleshooting:
    Try Safe Mode [[Troubleshoot Firefox issues using Safe Mode]]
    Try disabling hardware acceleration and update your plugins.
    [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Sorry to be short, happy to help with your reply.

  • When I open my internet and go to say Macys and try to bring up all pages for handbags, the screen goes black and it returns to the screen that has all my icons on it.  Why and how do I fix?

    When I open my internet and got to say the Macy's website and try to bring up all pages in the handbags dept, the screen goes black and it returns to the screen that has all my icons on it. Why?

    Safari is crashing.
    Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • Portege M400 freezes, screen goes black and fan speed increase when moved

    Can someone please help me?
    I recently received the Portege M400 from a friend 4 days ago and reformatted to Windows XP Tablet edition.
    All was going well until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically!,
    So far I have had no success in fixing this problem and I much appreciated is some one could help me!

    Hi there,
    I have the same laptop. Bought it from a friend also! That was a year ago. It was working perfectly till 6 months ago when I had it going 100% like yours. Screen freezes, fan speeds up and hangs up once it is moved. Recently, even if it doesnt move it hangs up also. I have tried many things like reinstalling drivers and Windows.....etc.
    I dont think it is Windows problem or drivers problem, because if you run BIOS and try to move the laptop, it also hangs up!!
    Tried updating the BIOS, also no benefit. I ended up opening the laptop and having a look to the motherboard (thinking that I could see something that I could fix!! But again, did not get any results.
    I tried also disconnecting peripherals one by one to see whether I could spot the problem, I disconnected the battery, the hard disk, the optical drive, the wirelss modem (from inside), memory, and even the bluetooth, but could not spot the culprit.
    I believe now that the problem is basically the motherboard (sort of wear and tear insulation problem) and it is beyond my humble expertise.
    I am sure if I would contact TOSHIBA, they would not be of much benefit as I am a second hand user. And if I try to buy from them a main board, they will charge me hell of money.
    I hope that this is helpful for you to avoid you wasting your time like me.
    Please if you would come into any progress, let me know. Likewise, I would be happy to update you.

  • Illustrator 2014 goes black and unresponsive when saving.

    Since the latest version of Illustrator, every time I save a file (even very small ones), the whole interface goes black and is unresponsive.
    There's no dialogue telling me it's saving at all.
    Also it seems saving is a whole lot slower than with the previous version.
    I am on a Windows 8.1 machine with 32gb of ram by the way.
    Is this a bug that can be adressed?
    grts
    JD

    Hi dogmatic73,
    Is it happening to some specific document or with every document.
    If this is the case then try to reset the preferences of Illustrator.
    Please refer the following article on "How to reset the preferences".
    Illustrator Help | Setting preferences
    Please let me know if this no the case.
    Regards,
    Sumit Singh

  • Screen goes black and I get steady beeps

    I have a 2004 HP Pavilion a600n, AMD processor with Window XP SP3 and 1 gb of ram. I have no viruses or spyware due to running McAfee, Malwarebytes, Spybot, Spyware Blaster, and Advanced System care.
    My pc starts fine, but after about an hour, the screen goes black, and I get a series of steady beeps about a second long. There are no short, long beeps. Just steady short beeps and a black screen.
    I am forced to shut down via the power button. When I try to restart, the beeping occurs again, and the monitor light remains orange.
    I will let my pc sit for a day or two, and I can start it back up, the monitor light is green then, but after an hour, the whole process starts over.
    I have no way of knowing if it's ram, video, or fans. My video is built into the motherboard.
    I will run PC Doctor and clean the dust out of the fans, etc.
    But I do not have a lot of money to just randomly go about replacing parts. Does anyone have any idea what is the  most likely culprit?
    Thank you in advance for any help.
    Kaat1220

    This shows how to get inside: http://h10032.www1.hp.com/ctg/Manual/c00225826.pdf
    If you have never done something like this before, maybe enlist a friend to help.  I suggest you not remove the CPU heat sink if that chore is not a task done before, at least without a knowledgeable friend along.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Screen Goes Black and Hangs when browsing by Artist, Album, Song, etc.

    I'm having a fairly huge issue with Front Row:
    I can play video files (although their is a moment of hangtime between selecting a video and the video actually playing) and music files (if I choose the "Shuffle Songs" option), however, when I choose to browse my music by artists, albums, songs, genres, etc. my screen goes black and stays that way until I hit CMD+Q over and over until it finally quits. Furthermore, when I do play music via "Shuffle Songs" and quit out of Front Row, the music continues to play in the background and cannot be stopped, paused, etc.
    Is there anyone out there who can help me fix this? I love Front Row and use it all the time and it would be a shame not to be able to anymore..
    Thanks in advance,
    Corey

    I have a similar problem. When browsing music the screen goes to black or just freezes on whatever was beeing displayed for maybe 30 seconds to a minute before continuing. It happens quite often. I am running the latest version of Front Row on a brand new Mac Mini. I have a very large iTunes music folder (about 830 gigabytes of uncompressed AIFF files) running on an external FW800 drive. I tried repairing permissions and a number of Front Row and a few iTunes files appear in the list. However, when I run repair permissions again, the same files are still listed so obviously if they need to be repaired, it's not happening. I tried repairing the volume (no problems found) and repairing permissions from the Install disc but the result was identical.

  • I can not get my iPad to mirror with Apple TV. When I toggle to mirror the tv screen goes black and the iPad freezes. The iPad iso is up to date

    I can not get my iPad to mirror on Apple TV. When I toggle the tv screen goes black and the iPad freezes. Have updated the iOS to latest settings and also updated the settings on the Apple TV

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

    When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

    Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • I just upgraded to FF 7 and now when I open Firefox none of my history or cookies have been saved. I have checked in options that Firefox will remember my history and all relevant settings but it is not doing it. Is there a problem with this on FF7?

    I just upgraded to FF7 & now when I open it none of my history or cookies are saved. I have checked in options that Firefox will remember my history and all relevant settings but it is not doing it. Is there a problem with FF7?

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    See also "Help About".
    *Tap the Alt key or press F10 to show the Menu bar.
    In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
    *There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
    *If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
    *You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
    It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
    See also:
    *https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
    *https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
    *https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

Maybe you are looking for

  • How to format a number datatype

    I had a report which uses a text field. In that text field included is a placeholder column that represents a datatype of number as &<CP_CAPITAL_BALANCE>. When I run it displays as: Capital Balance of 3423548.00 as of ... It should be formated into 3

  • Application failed codesign verification. the signiature was invalid or it was not signed with an...

    i keep getting this error all the time. i have  developer p12 on my windows i have distribution p12 on my windows when i publish in air for ios i use the distribution p12, with tje windows. upon creating the ipa i copied the ipa file to mac, then chn

  • Wrong PIN when initializing RSACryptoServiceProvider with smart card

    I get a "wrong PIN" exception initializing RSACryptoServiceProvider this way in Visual Studio C++ 2012: array<System::Byte>^ Sign(array<System::Byte>^ BinDataToSign, X509Certificate2^ Certificate, String^ ProviderName) //Set Password System::Security

  • Restarting music from last played after turn off!!

    Has anyone been able to figure out how to resume playback of shuffled music after turning off the ipod touch?? When U turn mine off or the battery runs out I have to start the shuffle from the beginning again. Really annoying isn't it?? Are there any

  • Cannot Debug Iterator Class

    Hi, I am getting error "type of termination: RABAX_STATE " when running a BSP page with TableView Iterator I want to debug the iterator local class that I have created. However The control does not stop in the methods of this iterator class when I se