Firefox mouse gestures suddenly stopped working.

My back or forward page now only see to reload the page instead moving back or forward a page. This was working fine seemingly no changes. The other odd thing is that when browsing a site like Reddit, once the back gesture is done and it is within the same site, the previous page displays for a split second then back to the current page. I hope this makes sense. All other gestures work even in Chrome.
Firefox=26.0
about:config=browser.gesture.swipe.left, string, Browser:BackOrBackDuplicate
OSX=10.9.1, MacBook Pro (late 2013)
Mouse Settings=Swipe with one or two fingers enables with nothing else enabled.

Try looking/posting here.
Firefox

Similar Messages

Multi-touch gestures suddenly stop working

Hi! I'm having problems with multi-touch gestures in browsers such as Safari, Chrome. Suddenly, 'double tap zoom' stops working during browsers use. Also, when I pinch to zoom, pinch to unzoom stops working. I'm using a MBPR 15" mid 2012, OS X Mavericks. These problems stalk me since Mountain Lion. Only reboot helps, but it doesn't solve the problem.

Try resetting the PRAM.
Barry

Mouse Click Suddenly STOPS working... on all mice

I had a situation today I've never seen before. I selected an item in a folder in the finder to drag and drop, but I couldn't let go. My mouse would not receive a single click/left click. I thought it might be the mouse so I switched mice to an Apple mouse and it wasn't working either. A RIGHT click worked with both mice, but the system stopped recognizing and registering single clicks. I had to reboot to get back control of my system and mice.
Apple Mouse was plugged directly into the front of my G5.
I just updated to 10.5.3 when it came out but I hadn't seen this problem till just now...
Jeff
Message was edited by: Jefferis Peterson

I have a similar problem with 2 Mac Minis running 10.5.3. Prior to the update the mouse behaved fine, but now every so often mouse clicks are not registered. On any window the mouse click causes the window to loose focus, but nothing really happens. The only way to deal with the computer seems to be to try to quit all running applications and suddenly the mouse begins to function as normal. Any suggestions for a fix?

Firefox 3.5.25 suddenly stopped working, have old computer this is as high as I can go

I have a mac powerbook about 5 years old. The only version of FF I can use is 3.6.25 and have been using it all along. 3 days ago it suddenly stopped working. I lost my igoogle page. Icannot sign in as the button does not work. When I try to search nothing happens. I reinstalled it 3 times, still nothing. Works fine on my ipad2.

It's tricky to try to troubleshoot this one as 3.5 isn't really supported anymore. However, as you reinstall Firefox, all your settings are actually still kept in your Profile folder, so if it's related to your settings, reinstalling won't fix the problem.
What you could try is creating a new profile and see if that solves it -- note however that this will be like installing a second copy of Firefox and you will not have access to any of your bookmarks, passwords, etc. It is basically like starting from scratch (though your information is still kept in the original profile -- they can both coexist).
This article covers the procedure of creating a new, second profile: https://support.mozilla.org/en-US/kb/Managing-profiles?s=profile&r=0&e=sph&as=s

Why has my magic mouse suddenly stopped working? I'm using 10.6.8

Why has my magic mouse suddenly stopped working? I'm using 10.6.8

We can't know. You have not told us what exactly the problem is. If there are any warnings, you need to provide them along with other info like the crash logs. If not you have to explain the situation in more detail. Just saying that it doesn't work anymore is not particularly useful.
Mylenium

Firefox suddenly stopped working blocking evenb safari- why? what has gone wrong, under feed back ?http?

Firefox suddenly stopped working with Mac OS 10.6.8- keeps blocking even Safari- will jot download , open pdf file downloads-- wasted a lot of time of several University experts- we can't locate work out why- x3 quit everything, download, reinstalled twice, machine switch on/off- something seriously wrong and wasting alot of time.
It had been working faultless for years- recently iMAC 1TB disc was changed by Apple under their programme of exchange for 'free'- it has not worked since!!!!
Many thanks

On PDF issues, disable the Adobe Acrobat plugin so that PDFs open in Apple's own native PDF reader instead.
Firefox menu bar: Tools > Add-ons > Plugins category
I don't understand the part about blocking Safari. Can you describe that problem in more detail?

My HP Pavilion g6 has suddenly gone slow and the mouse has completely stopped working

My computer has suddenly gone slow and the mouse has completely stopped working. The keyboard works on and off. I ran an HP PC hardware diagnostics UEFI which gave me this result:
smart check: passed
Long DST: Failed
Failure ID: PLQ77T-00074B-MFPWWI-61FF03
Can anyone please help?

The hard drive needs to be replaced. Post back for purchase suggestions and installation instructions.

IMAC suddenly stops working Mouse,keyboard, wifi all stops responding. PLEASE HELP

iMAC suddenly stops working,display is on but key board and mouse does not respond.I changed keyboard with usb also but still same.even wifi stops working also.PLEASE HELP before there was some kernel panic errors , i updated every thing, installed an original osx mountain Lion. taken to Apple service center. They found nothing wrong with hard ware. But i am having still the same problems. It just stops responding to keyboard, mouse even wifi goes off some time. I thought it may be keyboard mouse problem so i changed them to normal usb keyboard and mouse but still the same. PLEASE PLEAE HELP. -------- LAST ERROR REPORT IS BELOW Interval Since Last Panic Report: 687085 sec Panics Since Last Report: 2 Anonymous UUID: 48C67BCC-4ADB-0131-8FCC-DBD9C01FBB0C Fri Jul 19 17:23:01 2013 panic(cpu 0 caller 0xffffff80096b8655): Kernel trap at 0xffffff7f8a53f351, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x0000000000000060, CR3: 0x000000000bf36000, CR4: 0x0000000000000660 RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000018, RDX: 0x0000000000000004 RSP: 0xffffff8089c4ba60, RBP: 0xffffff8089c4ba80, RSI: 0x0000000000000060, RDI: 0x00000000ffffff8f R8: 0x00000000000000ff, R9: 0x0000000000000019, R10: 0xffffff8074831004, R11: 0x0000000000000008 R12: 0x0000000000000000, R13: 0xffffff807482e0ec, R14: 0x00000000ffffffff, R15: 0x0000000000000000 RFL: 0x0000000000010297, RIP: 0xffffff7f8a53f351, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000060, Error code: 0x0000000000000000, Fault CPU: 0x0 Backtrace (CPU 0), Frame : Return Address 0xffffff8089c4b700 : 0xffffff800961d626 0xffffff8089c4b770 : 0xffffff80096b8655 0xffffff8089c4b940 : 0xffffff80096ce17d 0xffffff8089c4b960 : 0xffffff7f8a53f351 0xffffff8089c4ba80 : 0xffffff7f8a525ff5 0xffffff8089c4bac0 : 0xffffff7f8a53a352 0xffffff8089c4bb50 : 0xffffff7f8a50da56 0xffffff8089c4bbb0 : 0xffffff7f8a4e5c36 0xffffff8089c4bbf0 : 0xffffff7f8a4e71b4 0xffffff8089c4bc20 : 0xffffff7f8a547d3c 0xffffff8089c4bc50 : 0xffffff7f8a4fad5b 0xffffff8089c4be00 : 0xffffff7f8a4f8a9e 0xffffff8089c4be40 : 0xffffff7f8a4fee0e 0xffffff8089c4be80 : 0xffffff7f8a5454df 0xffffff8089c4beb0 : 0xffffff7f8a58c82e 0xffffff8089c4bf00 : 0xffffff8009a4b1ab 0xffffff8089c4bf60 : 0xffffff800963e25e 0xffffff8089c4bfb0 : 0xffffff80096b3137 Kernel Extensions in backtrace: com.apple.driver.AirPort.Atheros40(600.72.2)[EBF8D6E8-59C6-3C1C-9549-32DDA193B1 D2]@0xffffff7f8a4ad000->0xffffff7f8a5f5fff dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89c83000 dependency: com.apple.iokit.IO80211Family(530.4)[E86BEE31-8EE0-34BE-A53F-2571D85CC628]@0xff ffff7f8a43e000 dependency: com.apple.iokit.IONetworkingFamily(3.0)[F02560D1-ADE6-3AD9-8D05-43CB2B7C8B87]@0 xffffff7f89ddc000 BSD process name corresponding to current thread: kernel_task Mac OS version: 12E55 Kernel version: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36 Kernel slide: 0x0000000009400000 Kernel text base: 0xffffff8009600000 System model name: iMac10,1 (Mac-F2268DC8) System uptime in nanoseconds: 397672779228 last loaded kext at 256566570174: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 65536) last unloaded kext at 363393284081: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 57344) loaded kexts: com.apple.filesystems.smbfs 1.8.4 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AppleHDA 2.3.7fc4 com.apple.driver.AppleMikeyHIDDriver 122 com.apple.driver.AGPM 100.12.87 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.driver.AppleUpstreamUserClient 3.5.10 com.apple.kext.AMDFramebuffer 8.1.2 com.apple.driver.AppleMikeyDriver 2.3.7fc4 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleLPC 1.6.0 com.apple.driver.AppleBacklight 170.2.5 com.apple.driver.AppleMCCSControl 1.1.11 com.apple.ATIRadeonX2000 8.1.2 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.iokit.IOBluetoothSerialManager 4.1.4f2 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.ApplePolicyControl 3.4.5 com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.filesystems.autofs 3.0 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 34 com.apple.driver.AppleIRController 320.15 com.apple.iokit.SCSITaskUserClient 3.5.5 com.apple.driver.AppleUSBCardReader 3.1.7 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.3.1 com.apple.driver.AppleUSBHub 5.5.5 com.apple.driver.AppleFWOHCI 4.9.6 com.apple.driver.AirPort.Atheros40 600.72.2 com.apple.driver.AppleRTC 1.5 com.apple.driver.AppleAHCIPort 2.5.2 com.apple.nvenet 2.0.19 com.apple.driver.AppleUSBEHCI 5.5.0 com.apple.driver.AppleUSBOHCI 5.2.5 com.apple.driver.AppleEFINVRAM 1.7 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 1.7 com.apple.driver.AppleSMBIOS 1.9 com.apple.driver.AppleACPIEC 1.7 com.apple.driver.AppleAPIC 1.6 com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0 com.apple.nke.applicationfirewall 4.0.39 com.apple.security.quarantine 2.1 com.apple.driver.AppleIntelCPUPowerManagement 196.0.0 com.apple.driver.DspFuncLib 2.3.7fc4 com.apple.iokit.IOAudioFamily 1.8.9fc11 com.apple.kext.OSvKernDSPLib 1.6 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleSMBusPCI 1.0.11d0 com.apple.driver.IOPlatformPluginFamily 5.3.0d51 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.driver.AppleSMBusController 1.0.11d0 com.apple.kext.AMD4600Controller 8.1.2 com.apple.kext.AMDSupport 8.1.2 com.apple.iokit.IOSurface 86.0.4 com.apple.iokit.IOSerialFamily 10.0.6 com.apple.iokit.IOBluetoothFamily 4.1.4f2 com.apple.driver.AppleGraphicsControl 3.4.5 com.apple.iokit.IONDRVSupport 2.3.7 com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.kext.triggers 1.0 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleSMC 3.1.4d2 com.apple.driver.AppleHDAController 2.3.7fc4 com.apple.iokit.IOGraphicsFamily 2.3.7 com.apple.iokit.IOHDAFamily 2.3.7fc4 com.apple.iokit.IOUSBHIDDriver 5.2.5 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5 com.apple.iokit.IOUSBMassStorageClass 3.5.1 com.apple.driver.AppleUSBMergeNub 5.5.5 com.apple.driver.AppleUSBComposite 5.2.5 com.apple.iokit.IOAHCISerialATAPI 2.5.1 com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5 com.apple.iokit.IOUSBUserClient 5.5.5 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 530.4 com.apple.iokit.IOAHCIFamily 2.3.1 com.apple.iokit.IONetworkingFamily 3.0 com.apple.iokit.IOUSBFamily 5.6.0 com.apple.driver.NVSMU 2.2.9 com.apple.driver.AppleEFIRuntime 1.7 com.apple.iokit.IOHIDFamily 1.8.1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 220.3 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.DiskImages 345 com.apple.iokit.IOStorageFamily 1.8 com.apple.driver.AppleKeyStore 28.21 com.apple.driver.AppleACPIPlatform 1.7 com.apple.iokit.IOPCIFamily 2.7.3 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.corecrypto 1.0 Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13 Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.72.0-P2P Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports Network Service: Ethernet, Ethernet, en0 Network Service: AirPort, AirPort, en1 Serial ATA Device: Hitachi HDE721010SLA330, 1 TB Serial ATA Device: HL-DT-ST DVDRW GA11N USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2 USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 4 USB Device: USB Keyboard, 0x04f2 (Chicony Electronics Co., Ltd.), 0x0111, 0x04300000 / 3 USB Device: Microsoft Notebook Optical Mouse with Tilt Wheel, 0x045e (Microsoft Corporation), 0x00d2, 0x04100000 / 2 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3

That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
The Apple Hardware Test or Apple Diagnostics, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working

Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Satellite L300 - Built In webcam suddenly stopped working

Hello,
I have a Toshiba Satellite L300 with a built in 2.0 USB camera and a windows 7 operating system, the camera suddenly stopped working since about 2-3 weeks ago with unknown reason!
I already tried system restore, un-installing and re-installing the camera driver, preformed a full scan by kaspersky internet antivirus 2012 (up to date), and I also ran a complete system and drivers troubleshooting ... and the problem still exists ...
When I use the windows live movie maker it gives me an error saying: cant record audio or video from the selected device. Make sure that the device you're trying to use is installed properly and not currently in use by another program.
The microphone works well on skype but the camera doesn't open!
Please tell me how to fix it, what am I missing?

> webcam appears in the device manager
Is it marked with an yellow exclamation mark?
Usually if the webcam software has been installed, you should be able to start this software going to:
All Programs -> Toshiba
There you should find the webcam software check if you can use and control the webcam after this software has been started normally the webcam control bar should pop up if you would move the mouse cursor above the upper display area PS: the bar can be moved to other area too; left right or bottom

Internet Suddenly Stopped Working

Hi,
My eMac, running 10.2, suddenly stopped working with my Internet. It shows my router, but when I open a browser, it says it can't find the server. However, my iTouch and laptop can both load with the same router and modem. Does anyone know what I should try to fix this? I didn't open up the case or anything and have tried Safari, Firefox and IE. None have worked.
Thanks

There are various glitches that occur with internet connections. My first suggestion is to disconnect the power to your router, leave for about 10secs then reconnect the power. This resets the router and its link to the ISP and sometimes resolves such problems. If this works the problem might still recur at times but at least you can get up & running again.
I would also suggest that you check with the router manufacturer's website for a firmware update for your model and instal this. This software is part of the router's internal operation not part of your computer's software even though the upgrade is usually done through one of your computers.
If these don't help I suggest you consider software maintenance/upgrades for your eMac. Various software components, eg preferences, can become corrupted and need to be replaced/upgraded from time to time.
Neville

Flash Player Suddenly Stopped Working on Chrome, I.E. and FF

As with many other posters, the latest version of flash player (fp) suddenly stopped working on FireFox, Chrome and Internet Explorer! I uninstalled fp using the fp uninstaller and attempted to reinstall it, but it would not download on FireFox nor Internet Explorer (Chrome has a built-in fp). Therefore, I did a system restore to an earlier date hoping this would solve the problem. It did not. I have also unticked hardware acceleration, still nothing.
If anyone has found a solution, please let me know. Thanking you all in advance.
Ndrei

Fortunately, I found my answer. I went into the Adobe Global Settings (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l ) and checked "Allow third party flash content to store data on your computer". Hopefully this may help someone else.

Two keys on external keyboard suddenly stop working, cannot log in

I have an iMac with Snow Leopard, USB keyboard (not wireless). From one moment to the next the "a" and "s" keys suddenly stopped working. I checked in the Universal Access and Speech panes as others with similar problems were advised and this was not the problem. I tried restarting the computer to see if that would help but it did not, and now I can't log in because these letters are in my password. HELP!!!!

Try another USB keyboard. (most any brand will work)
Personally I use Logitech MK120 - USB Keyboard & Mouse Combo's with all my Mac's.

Hello, my backspace and enter keys suddenly stopped working. I have done a PRAM reset and used the keyboard viewer to see if the buttons work and they don't. The PRAM reset didn't work either

Dear All, the backspace and enter keys on my wireless keyboard suddenly stopped working. Im using OS 10.7.5 and have tried a PRAM reset which didn't work. I also used the keyboard viewer to see if the keys worked on that but they don't. This is driving me mad, can anyone please tell me what to do? It happened just after an update but this could be a coincidence. Thank you for your time

For my computers, though some of them support BlueTooth devices and accessories,
my preference and economy of standard, is to have wired USB and also use powered
USB hubs for accessories.
I've used USB wired keyboards and mouse products; and some I've bought from the
original owners who had upgraded to BT, and never used the new Apple USB model;
so I have spares of these on-hand since they seldom fail, but do work when BT won't.
{A SMC reset should not cause a problem, or seldom has; but can solve some.}
In my opinion, the wired USB keyboard is an essential accessory, if not a necessary
primary means of user access on a continuous basis. At least until the wires fail...!

Some trackpad functions suddenly stop working

Hello!
I have no idea what causes this, but when I'm working on my MacBook, sometimes a couple of functions of the trackpad suddenly stop working. The functions that stop working are always the same: all of the "More Gestures" found in the "Trackpad" system preferences. Just scrolling and clicking always continue to work when this problem occurs.
When I just log out and log in again or restart my MacBook it works again, however, this can get quite annoying when you have to do this all the time.
I cannot figure out what causes these functions to suddenly stop working. Does anybody know a solution for this?

Is your MacBook one with an easily removeable battery? Some users have noted that batteries, particularly older ones, sometimes expand and interfere with the trackpad. To test for this do the following -
Shut down your MacBook.
Remove the battery. Examine it for signs of expansion. If any are found DO NOT use it again.
Leaving the battery out, connect to the MacBook's AC power adapter.
Start up your MacBook. Test it to see if the trackpad works normally.
If the problem goes away with the battery gone, or if you notice expansion of the battery, replace the battery.
Best of luck.

Firefox mouse gestures suddenly stopped working.

Similar Messages

Maybe you are looking for