Firefox no longer uses the duplex print featureon my default printer

Firefox has stopped printing in duplex mode on my default printer.
Windows Vista home LaserJet 4000. Works in Word Perfect and pdf files.

i have recommended this procedure because quite a few other users have reported that the printer dialog doesn't show up with firefox 27 and up and avast. many antivirus programs still stay active in the background even if their UI shows them as disabled - so i think it's better to test it by uninstalling avast. after a restart it should be immediately apparent if printing works again in firefox.

Similar Messages

Installed gxine, Firefox No Longer Uses Mplayer Plugin

I loaded gxine last night via pacman, and all was well until I realized that Firefox no longer uses the Mplayer plug in for MPGs in web pages - now it uses gxine's plug in, which I don't like as well.
Is there a way to configure which plug-in Firefox uses for a particular media type, or do I have to resort to deleting the plug in from Firefox's plug in directory?
Thanks!

I had this problem too. I think it's related to v. 1.5.
I can't remember exactly how I fixed it, but I think this is it (from mozillazine):
Type about:config into the address bar
Find the preference browser.download.pluginOverrideTypes, right-click on it and select reset.
Find the preference plugin.disable_full_page_plugin_for_types, right-click on it and select reset.
Both those preferences should now be empty. If one or both of the preferences is missing, don't worry - that's good.
Close Firefox, then go into your profile folder: http://kb.mozillazine.org/Profile_Folder
And delete the file 'mimeTypes.rdf'
This seems to me to be the result of the consistent policy of FF to become more and more Windows-like by making choices for you, by assuming that all users are stupid and that the devels know best. I may be wrong, but they are so persistent in bashing Opera for all the "clutter", which to me means "configurability". Bad policy, IMHO.

Two sided printing using the duplex

Officejet Pro 8610
When using the duplex for double sided printing the top and bottom margins are not properly aligned. However, when using the manual feed option there is accuracy which is the ca se when I print the same document (which I created using Office 2013) at my place of work.
So, holding a document such as a letter or a report, with printed text on both sides up to the light shows that the top and bottom lines on page 1 are lower than those on page 2. This pattern repeats for documents several pages long and those created by other people.
I have check the feed and the rollers on the duplex - all looks fine.

Some printers (certainly some LaserJet devices) include features (accessible via front panel menus, or Embedded Web Server, or Toolbox equivalents) to adjust the registration of the image on each page.
Some such devices allow different adjustments for each paper tray, and for differences between front and rear faces.
I've no idea whether or not this might apply to your OfficeJet Pro 8610 printer.

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?

Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

Is your printer selected? 
Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
See the screenshot below.

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

Can no longer use the Remote app on iPhone 5 or iPad 1

Hi,
I've long used the Remote app to control my iTunes library which I stream through two Airport Expresses. It's been a great solution for some time.
However, since the latest updates, I can no longer do this. The iTunes library does not show up in the app, only a message telling me to turn on Home Sharing in iTunes.
I have turned Sharing off and on on the iPhone, iPad and iTunes but have had no luck getting it to work.
Any suggestions welcome!
Thanks
Phil

Thanks Linc,
well that *****... I guess I am going to have to reach out to the developers. It does not look like they are doing this anytime soon cause the website is pretty old in itself.
Thanks for the info on this,
Paul

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Difficulty scanning slides on my Epson V600 running Lion, Adobe Photoshop CS6, and can no longer use the Epson scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?

I am running Lion 10.7.5, Adobe Photoshop CS6, scanning slides on my Epson V600 and can no longer use the scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?
In 10.7 there is not a twain that works with Photoshop for importing with all the options needed to scan transparencies. I noticed that when I was scanning in October 2012 I was still using CS6 so somehow I was managing to be able to use all the scan features.
They sell 2nd party software (VieScan and Silverscript)which I found to be just mimially OK and very hard to use.
I just want to scan like I used to.
Can I use time machine to go back to an earlier operating sysytem LEOPARD, and then do my scans and then save the photos and them go back to the LION system?
I spent 7 hours trying crazy solutions - downloading Windows CS2 Photoshop and then using a program so I could run it on the apple. Then I couldn't figure out how to put a plug in for the scanner in the stupid windows Photoshop program. Googgling the computer like a mad woman trying to ask questions. I am not giving up...
Please help if you can...
Thanks...

I assume you've tried using Image Capture. Give VueScan a try.
http://www.hamrick.com

I have purchased an Iphone 4 in Dubai two years ago. The model number is MC319LL. And unfortunately, I attempted to upgrade it online to a newer version 5.0.1(9A405) but right away my sim card was blocked. I can no longer use the telephone.

Dear Sir:
Two years ago I have purchased an Iphone 4 here in Carrefour Supermarket, Dubai UAE. The model number is MC319LL. Unfortunately last November 2011, I attempted to upgrade the OS to 5.0.1 but rightaway, my sim card(Etisalat UAE service provider) was blocked. As a result, I can no longer use the telephone function. I just found out recently that this model number .i.e.MC319LL is to be used for AT&T. My question is, how can I restore my unit to work as a celphone? And why is it that when I upgraded it, it was blocked. Was it illegal to sell this phone in the UAE market?
Thanks a lot.
Kathleen Jewel

You purchased a "hacked" iPhone(hacked to unlock it) from a non-official source for iPhones. Unfortunately, that's the risk you take when you purchase from a non-official source. There is no way to get your phone officially unlocked, & all warranty & support has been voided. Sorry, but you don't have any good choices here. Your best bet is to go back to Carrefour Supermarket & get your money back, then purchase an iPhone from an official source. If they won't give you your money back, have them "fix" your phone...they will have to "hack" it again. Good luck.

TS1702 after upgrading to ios 6 i can no longer use the app store.

after upgrading to ios 6 i can no longer use the app store on my iPhone, i am unable to install new apps. i chose to fill out the security questions and the problem seems to occur since then. what could be a solution to get the app store working again??

i just contacted apple support and the solution is the following!!!!!
connect the iphone to your computer and open itunes
then click on itunes store at the left side of the screen
then click at the right top side of your itunes screen on your email address (or id that is displayed there in the black bar)
choose log out
then go to the top of the screen with the search option in itunes where you can search in the store and choose an app that you have not yet installed.
then you get the security questions also in itunes, fill the them out and after you have done that you are asked to log in again
now when you install an app that works (it is then on your computer still)
open the app store on your iphone and choose the updates button and install the app from the cloud
now when you install new apps also from the app store on your iphone it works again!!! and you are no longer asked about the security questions
(the other option they told me (that i did not have to use) is: go to settings/general/ all the way at the bottom of the screen choose make new settings restore networksettings and choose yes)

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.

In firefox I cannot use the search engine, like to order a product or search it seems to be in the upper half of screen

in firefox. Icannot use the search engine in the screen and I cannot order anything as well. I get the cursor arrow insted of the I symbole.. I even reloaded firefox too. Can some one help?

'''Try the Firefox SafeMode''' to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... 
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Firefox no longer uses the duplex print featureon my default printer

Similar Messages

Maybe you are looking for