Firefox not displaying favicon/.ico file for specific website

Firefox has always displayed the favicon for my website, until recently. Now there is just a blank space where the favicon should be. I am able to see the favicon for all other websites except my own. It is a wordpress site, so I followed their most recent instructions for adding a favicon. I even tried some other guidelines and tips for adding .ico files, just in case wordpress was missing something, but still no luck. I have double-checked the file format as a 16x16px .ico file and made sure the code & image location within my website directory was correct... Everything looks as it should. The favicon is displaying perfectly in all other browsers I tried, such as Chrome, Safari, Opera & IE. I have cleared my cache, cleared my browser history and even uninstalled/reinstalled Firefox. I also tried another computer using a different IP address. It just isn't displaying.
When I preview the .ico file under 'page info -> media' it looks like Firefox is locating the image and recognizing the file dimensions, but nothing appears in the preview window and under 'file size' it just says "unknown (not cached)."
Here is the link to the site: http://www.mattielynn.com/
Does anyone know why this might be happening?

That image doesn't seem to be working in Firefox 3 and 8 (works in Firefox 9 and later).
It works if I save it as 24 bit instead of 32 bit.
<pre><nowiki>data:image/x-icon;base64,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</nowiki></pre>

Similar Messages

Setting up Favicon.ico file

I use GoDaddy to Host my site. I don't have MobileMe. In order to set up my site so the favicon.ico file displays on web browser tabs, can anyone run me through the steps to upload the file unto GoDaddy (I don't know where to go on the site) and what all I have to do from there? It'll sure be amazing if I don't have to put favicon.ico HTML code code on each page (yeesh....that'll be painful).

Try putting the icon image up one level.
I can access it directly as follows
http://www.servalonline.com/Serval_Online/favicon.ico
but the browser does not pick it up. It needs to be in the
root level for the site (unless the html tells it other wise).
i.e. http://www.servalonline.com/favicon.ico at the same level
as the Serval_Online folder.
Dave

Bridge CS3 Does Not Display Pentax PEF files

Hi,
I am running Vista and have Bridge CS3 installed on my Notebook. I updated Bridge to v 2.1.1.9 and have added Camera RAW 4.5. My problem is that Bridge does not display Pentax RAW files from a K20 camera (its on the supported list). DNG and JPG files show correctly. Bridge only shows a PEF Icon for each image. When you double click on the Icon, the file opens in Camera RAW 4.5 correctly and also in Photoshop CS3.
Can anyone tell me what I need to do to see the PEF images in Bridge?
Thanks
Keith

Revisit the download page, look at the instructions, and make sure you unzipped ACR to the correct folder, and you don't have an ACR in two places.

Windows could not display the images available for installation

I am trying to perform unattended installation of windows which I created with Windows AIK. When I add answer file on USB's with windows installation root I get "windows could not display..." message. Problem is there even when there are just a
few simple lines (oobe, microsoft international core-WinPe).
I replaced install.wim file of standard windows installation iso with customized install.wim and then created catalog file with windows system image manager.
Kind people of world, please help!

Hi bugili,
Could you help us post the complete error information, it will more helpful when we locate the issue. I am not quite understand “add answer file on USB's with windows
installation root”, do you mean the answer file and install file on the external device? Please try to confirm this image has the same Security permission with
others image in WDS image share folder, the WDS default image location is like
x:\RemoteInstall\Images.
If it not work please post the WDS error log,
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
The simlar thread:
Windows could not display the images available for installation.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/07fe03dd-9798-4583-8d0b-dc963c95434c/windows-could-not-display-the-images-available-for-installation?forum=winserversetupMore
information:
How to Add a Boot Image to WDS Server
https://social.technet.microsoft.com/wiki/contents/articles/11643.how-to-add-a-boot-image-to-wds-server.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Enable to create ldt file for specific program using FNDLOAD submit request

hi ALL ,
i am trying to create .ldt file for specific program but the things is that following program creating .ldt file for all the program which are available on instance .
please suggest me if i did anything wrong in my code ...
DECLARE
req_id fnd_concurrent_requests.request_id%TYPE;
BEGIN
fnd_global.apps_initialize (user_id => 1012001,
resp_id => 20420,
resp_appl_id => 1
req_id :=
fnd_request.submit_request
(application => 'FND',
program => 'FNDLOAD',
description => NULL,
start_time => NULL,
sub_request => FALSE,
argument1 => 'DOWNLOAD' ---Mode - UPLOAD
argument2 => '@fnd:patch/115/import/afcpprog.lct'
-- -LCT File
argument3 => '/tmp/concqueues.ldt' -- -
argument4 => 'PROGRAM',
argument5 => 'XXFUJI'
,argument6 => 'XXSAG_FILE_DATA'
DBMS_OUTPUT.put_line ('req_id= ' || req_id);
COMMIT;
END;
thanks in advance
sagar

thanks for your reply ... Alex
... but... no i don't wanna create concurrent program for fndload neither i want to use FNDLOAD script ... the above FNDLOAD Submit request program worked for me and using that i have created ldt but my problem is that program is creating ldt for all program which are registered , it's not picking my my file which i pass as a parameter ...please have look into my code ...
and please suggest me ..
thanks
sagar

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

Camera RAW does NOT yet support raw files for the new Canon Sureshot S95

Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asap

Hello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

Message 2100 not found; No message file for product=RDBMS, facility=UL

Hi,
I am trying to run sqlldr. But I got this message:
Message 2100 not found; No message file for product=RDBMS, facility=UL;
I checked my ORACLE_HOME and it is set to: C:\oraclexe\app\oracle\product\10.2.0\server which includes the folders BIN,RDBMS, ....
I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS.MSG inside the folder. If this is the solution where can I find this file? I read in the forums to copy it from the server directory to the client, but I couldn't find it anywhere on my machine.
Thanks,
M

Thansk, I really appreciate your help. This is the result:
AGSDESKTOPJAVA=C:\Program Files (x86)\ArcGIS\Desktop10.0\
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Matt\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=Smith
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Matt
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_23
LOCALAPPDATA=C:\Users\Matt\AppData\Local
LOGONSERVER=\\Smith
NUMBER_OF_PROCESSORS=2
ORACLE_BASE=C:\oraclexe\app\oracle
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
ORA_NLS=C:\oraclexe\app\oracle\product\10.2.0\server\nls
OS=Windows_NT
Path=C:\XEClient\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows
\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerSh
ell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\MATLAB\R
2010a\runtime\win64;C:\MATLAB\R2010a\bin;C:\Program Files (x86)\Common Files\Rox
io Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLSh
ared\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 6 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0602
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\10.0\Roxio Central
36\
SESSIONNAME=Console
SQLPATH=C:\XEClient\sqlplus
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Matt\AppData\Local\Temp
TMP=C:\Users\Matt\AppData\Local\Temp
USERDOMAIN=Smith
USERNAME=Matt
USERPROFILE=C:\Users\Matt
VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
windir=C:\Windows

Message 2100 not found; No message file for product=RDBMS, facility=ULMessa

hi all,
I am using windows2000 and 10g i am running loader using java
but getting a message like
Message 2100 not found; No message file for product=RDBMS, facility=ULMessage
I have checked oracle_home and path in my env setting. but no progress same message i am getting
but its running fine using cmd prompt.
please help
thanks in advance.

First 10g is not a version it is a marketing label. What is the version number (to 3 decimal places).
Second can you expand your question to explain you this has to do with AQ? How are enqueued, what code is executing to dequeue? We can make guesses but they may have nothing to do with your actual environment.

Photoshop CC with CS3 will not open Nikon NEF files for the D610.[was:CC]

Photoshop CC with CS3 will not open Nikon NEF files for the D610. Is there a fix for this? Fast Eddy

I assume you're running Photoshop CC (not sure what you mean by "with CS3" unless that's the version you upgraded to CC from)
Download Camera Raw 8.3RC
http://labs.adobe.com/technologies/cameraraw8-3-cc/?tabID=details#tabTop

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

HT5858 Both my iPhone & iPad now on version 7 do not display the airplay connection for my Apple TV ?

Both my iPhone & iPad now on version 7 do not display the airplay connection for my Apple TV ?

Hey Barry02,
Thanks for the question. I understand you are experiencing issues with AirPlay. The following resource may help to resolve your issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Because the issue is occurring on both devices, it may be isolated to the Apple TV itself. You may want to troubleshoot the Apple TV connection:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Thanks,
Matt M.

I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

"could not get an output file for the document (error RWI 00314)"

Hi
We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
Can some one please suggest any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
Thank's for your help

Hi Sreeram,
Earlier i also faced same kind of problem.
To solve this kind of problems you need to shutdown the server.
second thing is when patches missed that time also you will get this kind of problem.
check j2ee connection is it properly working or not?
Regards,
samar reddy.

Firefox not displaying favicon/.ico file for specific website

Similar Messages

Maybe you are looking for