Firefox not helping with Flash problem
Ok, so, I'm getting really irritated with Flash. I talked to
a friend who was having flash problems and they said they
downloaded Firefox and it fixed the problem. Well, after doing
EVERYTHING else first, I thought, what the heck, maybe it might
actually work. So I downloaded and installed Firefox. Ok, that
installed perfectly fine. So I used Firefox to download Flash 9. I
thought all was going to work out, because Firefox didn't just
refresh the page like Internet Explorer did whenever I clicked the
"Agree and download now" button on the download page. It actually
downloaded and "said" it installed correctly. But I still can't
play ANYTHING no Youtube STILL!! I go to youtube on Firefox and
aperently it doesn't regonize any Flash on my computer. I go to
youtube on Internet Ex. and it says I need the latest version of
Flash. I tried rebooting the computer. I tried uninstalling and
installing it AGAIN. What the F is the problem? I've made sure all
my AxtiveX controlls are set to whatever thry need to be, my
Shockwave is updated, my security is not interfearing. I'm getting
really pissed. I've been trying to fix this problem for months
now!! What else could be going wrong?? Is there something I haven't
tried yet? Do I just need to get a new F-ing computer? Someone
help!!
Well the first thing you need to understand is this...
Flash Player for Windows Internet Explorer is an ActiveX
control.
Flash Player for Windows for ALL other browsers is a plugin.
They do the same thing ultimately, but they're separate
downloads and on your machine they're actually seperate bits of
software.
So the reason that so many people have success with Firefox
is that the Flash Player plugin seldom has install failures. But
for IE Windows users the Flash Player activex control often has
permission-related install failures that cause these kind of
issues. It's unfortunate, but very, very complex and we've been
fighting it for a long time.
So the thing to remember is that when you're talking about
Firefox, you're not dealing with ActiveX controls in ANY way.
So here's the question.. When you launch JUST Firefox, and go
to this page, what do you see?
http://www.adobe.com/shockwave/welcome/
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe
Similar Messages
-
Using Firefox 27 on the Mac. Video on most sites will not now work. I know I am not alone with this problem. What gives?
Hi KevinMcL,
Thank you for contacting support. I am also using your set up and I experience video issues when I have hardware acceleration turned on.
Other steps you can take to improve your experience:
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
Did this fix your problems? Please report back to us!
Thank you. -
***Adobe chat support is not trained to help with my problem...
Hi, I installed Yosemite the mac os on my macbook pro as a result I was unable to access some of my pro apps. So I backed up my system (i thought) to an external drive and downgraded my system to Maverics. I reinstalled all my apps. Now suddenly My Adobe apps don't work. I got the Licensing for this product has stopped working error. I downloaded the recommended License recovery tool, but it says it couldnt open the application because "powerPC applications are no longer supported. Please help! I have a 2007 macbook pro and I cant use my AE cs4 or Ps cs4 apps. ***Adobe chat support is not trained to help with my problem
If you have OSX 10.7 or above you can try the LicenseRecover.py file. You have to open Terminal, type sudo and leave a space, then drag the LicenseRecovery.py file from the folder into the window, press Enter. It will look like this:
Enter your password to run it. You won't see the cursor move, just enter it anyway, and let the script run.
Then try running your CS4 programs. -
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
I have tried everyway i can find to install the latest 'flash
player' and for some reason once the installation dialogue box
appears and i click "install" nothing happends. ive been trying
from links aswell as directly from the official page and it still
does not work. I am able to install other programs and such just
not 'flash player'
can anyone help with this problem as im highly confused.
cheers
Richieloysi wrote:
> Hi!
> I have a problem with the installation of Flash player 9
ActiveX.
> When I have completed the installation, a pop-up shows
up, which says "Error!
> Can't install
C:\WINDOWS\system32\Macromed\Flash\Flash9.ocx, please contact
> supporter" And that's what brings me to the question,
what is the problem and
> how do i fix it? Please answer!!!
go to adobe.com/support/flash
and look for installation troubleshooting
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Help with flash video buffering
I need help with flash video buffering. I've created a
buffering graphic to show up when the clip is loading. The problem
that I'm having is that when the video finishs playing, the buffer
is empty and the graphic pops back on. The following is the code
that I'm using to call and buffer the video. Any help would be
great!
stop();
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
ns.setBufferTime(10);
ns.onStatus = function(info){
if(info.code == "NetStream.Buffer.Full"){
bufferClip._visible = false;
if(info.code == "NetStream.Buffer.Empty"){
bufferClip._visible = true;
if (info.code == "NetStream.Stop") {
bufferClip._visible = false;
theVideo.attachVideo (ns);
ns.play("my_clip.flv");
rewindButton.onRelease= function(){
ns.seek(0);
playButton.onRelease= function(){
ns.pause();
}Again thank you for your help in advance...
I put the script folder into the root. As far as the .flv
file it is showing up as being "put" to my web server. when i
checked the root folder it is there. again i am having the same
problem.. the local view works but when i check it on the web it
just shows that there should be a flash video there but it does not
show up.
i created a new root for this test page the new link is..
http://www.wfwa.org/TESTindexfolder/TESTindex.asp
here are the files that are showing up in it...
flashprojectwebvid.fla
flashprojectwebvid.html
flashprojectwebvid.swf
PBSpromo.flv
SteelExternalPlaySeekMute.swf
TESTindex.asp
and the Scripts folder
thanks again for any help.. -
Captivate 4 AS2 Text Entry Box not working with Flash Player 11
I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?
You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai -
AIR SDK 17 (BETA) is not working with Flash CS6
Hi,
The latest AIR SDK 17 is not working with Flash CS6.
I tried to publish and install an iOS app to my connected device via USB but I always get an error "Check if iTunes is installed".
The latest stable AIR SDK 16 is working fine, and yes, iTunes is installed on my PC.
DETAILS:
- Flash CS6
- AIR SDK 17
- System: Windows 8,1
- iPodTouch with iOS 8.1
REPRODUCE:
Open new AIR iOS template and publish/install it to a USB connected iOS 8.1 device.
Anyone else got that error?I was getting this intermittently. Not a super problem. A remove and install in iTunes gets it loaded (after you tell ITunes where it is).
-
Help with systemd problems/reply to closed thread
@Everyone; as the previopus topic was closed, I am opening a new one here, partly to reply to some things that was said to me in the previous thread/topic (and I do not like to leave people hanging), but mainly to try and get some help with my systemd config (that I was not able to find help with in the wiki or manpages).
@czubek; eww, that sounds rather similiar to some other operating systems I've heard of (not just, but obviously including, windows)... For me, subjectively, that is not very attractive, as being able to have a single application do a single thing, and then mixing and matching as I personally see fit is a great thing.
@tomegun: I can indeed see your point, but if I made direct quotes on all the things I reply too, my posts would reach biblical proportions.
Mmm-hmm, I do indeed know of "the Arch Way"; however, the system that you expose can be of varying complexity as well, and I found that the system that was presented to me by way of Sysvinit/initscripts was a way simpler system than that presented to me by systemd.
Indeed, and I do like that; I enjoy knowing how my system works and learning more about it; however, the truth is that reading manpages and the wiki isn't always enough. And I use the numbers instead of letters in certain places as a jest, please, do not get offended by that; if you have to, get offended by my opinions.
Ah, I have now scanned the wiki, the manpages, and have already faced problems. While part of me is saddened by this fact (as I was hoping for a smooth transition to systemd), part of me is glad that I can at least prove that everything isn't quite as simple as some people would make it out to be. More on this later in this post, as I do need help with the problems I have faced.
And I wouldn't say that the new and old way are equally trivial, as I immediatley faced problems with "the new way". More on this later.
Ok, I find that if the debate is polarized, then there is nothing wrong with describing it as such. I spell what I see.
Oh my... Ignored as a matter of principle? I would say that that is an excellent way to stagnate; by that logic, moviemakers, gamemakers etcetera should ignore any and all criticism they recieve, as the critics are not contributing.... Wouldn't that lead to a complete halt in development? Isn't criticism (so long as it is constructive, obviously) a key component of (media/software) evolution?
Ah, I see, then I misunderstood the current state of the install media
"Some adjustements"... Well, I guess we'll have to see how that goes, then. Hopefully it'll be smooth.
@Everyone; Awebb possesses stunning accuracy as far as his observations go.
@zb3; My point exactly.
@tomegun; I believe you to be wrong; complaining (but not whining) is the first step towards improvement, as I think that I and zb3 has shown.
Further, your last point (where you talk about "deep understanding of Y" and whatnot) is basically saying that only devs and programmers can contribute, so zb3's observation would be correct.
Also, making suggestions is part of constructive criticism; you can do that even if you can't code, e.g. by saying "X works badly because it makes Y crash; couldn't we replace X with something akin to Z?". This is a valid point even if you have no intricate understanding of X, Y or Z, and if it is impossible to replace X for one reason or the other, it's not hard to reply with "Replacing X is impossible because of reason Q", and then see if someone can solve reason Q etcetera.
zb3's example is obviously helping; for one, it would allow people to know taht they can't boot with systemd in certain cases, or that installing/runing systemd can break their system. I would consider that rather important information.
@Everyone; Now then, to see if I can (or rather, if I can get help to) shed some light on some problems I've been having.
My transition to systemd went pretty smooth (besides the fact that I couldn't use 'systemctl' to set anything, and neither duckduckgo nor any posts in the forums could help me (the error I continously got was "Failed to issue method call: Launch helper exited with unknown return code 1") and that there are no manpages/tips on how to configure the files for "localtime" and "adjtime", which would've been good considering some syntax have changed) to about halfway through, to the point where I was supposed to start using systemd for my daemons.
Now then, to the main problem; first, I tried running
"systemctl enable syslog-ng.service"
and got the following message;
"ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
Since it doesn't exclusively say that something went wrong (at least as far as I can understand), I pondered the message a bit, but moved on to try and start dbus by issuing
"systemctl enable dbus.service",
to which I got the reply
"The unit files have no [Install] section. They are not meant to be enabled using systemctl."
This I can only assume is an error message of some sort, especially seeing as it says "not meant to be enabled using systemctl", but the wiki rather explicitly states that that is what I am supposed to do.
I dare not move on (or attempt to start other daemons) without further advice, as I fear I might break my system. Any ideas as to how to solve this would be greatly appreciated.tcmdvm wrote:
The message;
"ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
indicates that running "systemctl enable syslog.service" is now enabled.
If you try running sytemtctl enable <whatever>.service and get
"The unit files have no [Install] section. They are not meant to be enabled using systemctl." means there is no <whatever>.service file available to enable.
The dbus.service as far as I know is already enabled when installing systemd and doesn't require any action.
Ah, right, systemd is chatty (I'm of the old skool; if nothing is/goes wrong, a program should keep quiet).
Oh ok, then I should dare more on.
ZekeSulastin wrote:To be a bit more precise, it means the service is there but it's only used as a dependency for something else; the [Install] section of the file is what tells systemctl where to link it and such. Also, where exactly in the wiki were you told explicitly to 'systemctl enable dbus.service'? I can easily point you to the sections in both installation guides that tell you how to set things like /etc/localtime et. al (also `man 7 archlinux`), but not the one that said to manually enable dbus.
Ah, I see; and well, I was told right here, going from the top, to "Enable Daemons formerly listed in rc.conf [...] For a translation of the daemons from /etc/rc.conf to systemd services, see: List of Daemons and Services.", and, using the list, dbus is mentioned there, as you can see. Since I started from the top, I did not know that you didn't need to enable that service. Perhaps it could be added to the descriptions of the relevant services in the Wiki which ones are autostarted?
ZekeSulastin wrote:Lastly, I don't think trying to continue conversations from a closed thread is a very good idea, let alone doing it in a giant undivided wall of text that makes it quite difficult to pick out much any single topic.
Meh, I directly refer to the relevant people, they can easily see their own old posts in the previous thread, etcetera... I think te ones who have something to say will be able to find my replies to their previous statements (or so I hope). For now, as everyone can see, I quote stuff (but man might I make some huge posts if I ever post again in the future, if I quote what I reply to).
fsckd wrote:This is not really a technical support subforum. Moving from Arch Discussion to Newbie Corner.
Ah ok, thanks (or perhaps a cautious thanks? Moving it to "newbie corner" might, after all, be a subtle insult...).
tomegun wrote:It is not really possible to follow your message as you don't quote what you are replying to. Moreover, as the thread was closed I think that means we should stop the discussion ;-)
Hmm, I think it means cop-out for lack or proper arguments/responses... But ok, I'll let it slide, for now (mainly as I can't do much else).
tomegun wrote:You are not meant to enable dbus.service as it is enabled unconditionally. To check the enabled/disabled state of your services try "systemctl list-unit-files". "static" means that you are not supposed to enabled/disable it.
Ah ok, thank you. Now, having abandoned all hope, I'll start configuring again and see how it goes... May the void protect me. If I die, grieve not for me, but remember me in the fight against hard-to-configure applications.
(edit/addon)
Actually, what am I supposed to do with "hwclock"? the List of Daemons only says that I shouldn't run that in tandem with ntpd, but I'm not running ntpd, so... How do I get hwclock with systemd?
Edited for additional question.
Last edited by incassum (2012-11-07 08:44:42) -
powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.
Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario -
Does someone may help with following problem:
Does someone may help with following problem:
In my family we have we have 3 dock stations audio devices: Bose Sound Dock series II, Philips DS3020/12, Sharp DK-AP7N(R).
We have also 2 Iphones 4s and one ipod classic.
The latest iphone 4s does not work with the Bose and Philips audio systems: the iPhone 4s is charging, but music is playing in the iPhone speakers and not in the dock speakers, on the iPhone there is a message. In Italian the message is "Il dispositivo non supporta questo accessorio" that almost means that the iPhone does not support the device. Please note that the iPhone works with the Sharp DK-AP7N(R) audio system.
The other iPhone 4s works with all 3 devices since long time.
Both the iPhones have iOS 7.1.1, so it should be not related to software version.
The ipod classic works with all 3 devices.
Does anyone know how to fixI know that Bose products work with iPhones they sell Bose at Apple store online I also have Bose no problem
On Blue Tooth on IPhone press forget this device and any others on list then try to pair iPhone again
Make sure Blue Tooth is enabled on iPhone and do not run any other Apps at the same time.
Bsydd Uk -
This has happened on several computers. I can download using video download helper with on problems until I attempt to download "Dishonorable Disclosures" on You Tube once a download attempt is made on that video download helper stops working for that video or any other video. Could this be a virus or malware? How do I fix download helper after this happens?
Which movie do you mean?
Try to clear the Google cookies.
*Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
You can also try to delete the webappsstore.sqlite file in the Firefox Profile Folder to clear the local storage.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server. -
Need help with Flash CS4 buttons/can't get buttons to control anything
Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
> -
My Firefox keeps crashing with flash websites
My Firefox keeps crashing with flash enabled websites. I disabled all plugins and addons and keeps doing it. Cannot browse the web for more than a couple minutes without a crash. Crash reports is basically always the same with the exception of the site where the crashing event is triggered.
AdapterDeviceID: 0x0611
AdapterVendorID: 0x10de
Add-ons: savesession%40noasobi.net:1.3.1.6,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:20.0.1
AvailablePageFile: 4720615424
AvailablePhysicalMemory: 2675757056
AvailableVirtualMemory: 1845903360
BuildID: 20130409194949
CrashTime: 1368383965
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1367196491
Notes: AdapterVendorID: 0x10de, AdapterDeviceID: 0x0611, AdapterSubsysID: 00000000, AdapterDriverVersion: 6.14.11.8618
D3D10 Layers? D3D10 Layers- D3D9 Layers? D3D9 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 228
StartupTime: 1368383939
SystemMemoryUsePercentage: 23
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 2147352576
URL: http://www.youtube.com/
Vendor: Mozilla
Version: 20.0.1
Winsock_LSP: Amplusnet LSP over [MSAFD Tcpip [TCP/IP]] : 2 : 1 :
Amplusnet LSP over [MSAFD Tcpip [UDP/IP]] : 2 : 2 : C:\WINDOWS\system32\PCProxy.dll
MSAFD Tcpip [TCP/IP] : 2 : 1 : mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 : mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 : mswsock.dll
RSVP UDP Service Provider : 6 : 2 : mswsock.dll
RSVP TCP Service Provider : 6 : 1 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{77EF9ABB-4B1B-4D36-AB76-8BC526DFB0D3}] SEQPACKET 5 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{77EF9ABB-4B1B-4D36-AB76-8BC526DFB0D3}] DATAGRAM 5 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{5D33D080-0BD0-4AC0-81B4-7D4E389A9F2F}] SEQPACKET 4 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{5D33D080-0BD0-4AC0-81B4-7D4E389A9F2F}] DATAGRAM 4 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D373E84F-B180-430A-9292-4DAC7E089C1A}] SEQPACKET 3 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D373E84F-B180-430A-9292-4DAC7E089C1A}] DATAGRAM 3 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0ECC35C1-A8D8-47BE-A8DC-F4F3D54A2973}] SEQPACKET 0 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0ECC35C1-A8D8-47BE-A8DC-F4F3D54A2973}] DATAGRAM 0 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{AE676D95-0EAB-4DCF-8901-63F56860A6E0}] SEQPACKET 1 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{AE676D95-0EAB-4DCF-8901-63F56860A6E0}] DATAGRAM 1 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{BA734C90-C8ED-4551-BEF2-A35F5632D3E4}] SEQPACKET 2 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{BA734C90-C8ED-4551-BEF2-A35F5632D3E4}] DATAGRAM 2 : 2 : 2 : mswsock.dll
Amplusnet LSP : 2 : 0 : C:\WINDOWS\system32\PCProxy.dll
This report also contains technical information about the state of the application when it crashed.If you open a new tab in Firefox to the '''about:crashes''' page you may be able to click through to your crash data on the Mozilla's crash stats server. These page have a link you can post here for volunteers to take a look. Check the date/time on the crash, though, to make sure it is for the relevant time period.
Maybe you are looking for
-
While creating Update rules -"Error Info source does not exist"
While creating an update rule I am getting an error that Info source doesnot exist though the inf source is active. here is error: No communication structure exists in version abc... A Message no. RSAU251 Diagnosis In order to be able to maintain
-
DESCRIPTIONS ARE NOT SHOWED IN REPORT PAINTER
Hi, I have a problem with the report painter, because i am run the report but i realize that if the master data(Commitment item ) is not created for the next year example 2008 and I am running the report for the year 2007, when the report is gener
-
Project Report in FIORI Smart Business
Hello, I'm facing a problem in the Project Report in FIORI Smart Business Application. My problem is i can't visualize the progression of my project in the progress bar of this application. All other progress bar works fine. Are there any missing con
-
My yahoo contacts are not updating on my iphone
for the last several weeks, changes i have made to my yahoo contacts are not updating on my iphone. any idea why this may be?
-
Hi buddies; I'm trying to doing a full backup, I'm doing the backup thru OEM, and it's failling, with these messages: Starting backup at 22-DEC-09 current log archived RMAN-00571: =========================================================== RMAN-00569