Firefox not loading error: unable to connect. Using explorer backup why

Firefox responding with "unable to connect" I'm able to use Internet Explorer as a back up. I wasn't finding any information that explained this problem,
Bill

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls

Similar Messages

Power book not loading (error: unable to find driver for this platform) help me please

power book not loading (error: unable to find driver for this platform) help

That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
You post is a little cryptic, however. We may be of further help if you can tell us:
<> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
<> what program and its version your were trying to run and/or install.

When I try to access a web page or link from a web page I receive an error message like "Server not found" or "Unable to connect." After repeated "try again" attempts the page will load, but when I click on a button or link, the same thing repeats. Why?

When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>

Thank you for asking this question. I'm having the same issues.
Liz

Fire fox will not open, page says unable to connect. using 7.0.1

Fire fox will not open, page says unable to connect. using 7.0.1

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Server not found or Unable to connect error message.

I am running Windows 7 with Firefox 3.6.8, the latest version. From time to time a page will come up "server not found" or "unable to connect." I do not have this problem with Internet Explorer. But, I would prefer to use Firefox. Also, it seems to be getting worse lately. I am using an ethernet connection.

https://support.mozilla.com/en-US/kb/Server+not+found
http://kb.mozillazine.org/Error_loading_websites

Error: unable to connect to database using user system. please check privil

Hi All,
i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
dblogin userid system, password tiger.
Error: unable to connect to database using user system. please check privil
Can you please help me to connect RR database also in GGSCI promt.
Thanks
Raja

Did you try with RR database tns name or sid while connecting ?
If No then try this ,
GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
Password:
Successfully logged into database.
HTP
Annamalai.

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!
== This happened ==
Every time Firefox opened
== Since I downloaded Firefox

same here my AV is ESET, i already unblock it but no use can't connect to the internet..

I use google with firefox, everytime i open firefox and begin browsing or go to check my mail i get a firefox not responding error message on top left of screen. How do i get rid of this?

Question
I use google with firefox, everytime i open firefox and begin browsing or go to check my mail i get a firefox not responding error message on top left of screen. How do i get rid of this?

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Error: Unable to connect to database using connection_pool

Hi experts
I have created repository and reports on my windows machine using ODBC , Now i have tranfered this to on unix with OCI, But when i am connecting to my dtabase it is showng the error:
Error: Unable to connect to database using connection_pool
Please suggest how to resolve this..

Have you install the Oracle client in your Unix server?

BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
    ([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD.

I am getting the error "Unable to connect to data warehouse management server" when I try to register it DWMS

I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

unplug modem and router and reboot.
check setting for network, verify password.
sign in. Enter computer information.
let me know if this works.

Reload Software:552 and then "Application loader was unable to connect with your device."

Hi guys
I'm new to this forum and looking for a help please..
My curve 8900 got the "Reload Software:552" message on the screen. I was trying to uninstall an application and after it asked me to reboot, it showed me that message. I already try to reinstall the OS like most of you guys said. But when I already in the process of that, it showed me "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry"
I was trying this steps..
1. use the BlackBerry Desktop Manager
2. connect the BlackBerry to the computer using a USB cable
3. click application loader, then start
4. then i choose the OS and apps i want to install it also
5. after i click finish and the process start, i stuck on the task 2 of 5 "wait for device initialization" and then the message "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry" showed.
I try and try again but there is no use. it keeps show that message.
help me please, this really frustrates me
Thanks in advance guys..

1. Make certain your USB cable is connected to a main REAR USB port on the rear of the PC, not a front USB port, not a USB hub.
2. Try loading the OS with these instructions (make sure that Desktop Manager is not running):
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Firefox not loading error: unable to connect. Using explorer backup why

Similar Messages

Maybe you are looking for