Firefox Not Responding after Installing Microsoft Office 10

After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

Similar Messages

Captivate 7 Stuck Loading after installing Microsoft Office 2013

Before the problem started, I initially had Adobe Captivate 5 (not 7) and have been working fine until I installed Microsoft Office 2013. As I tried to start Captivate 5, it gets stuck on the loading page—the welcome screen never shows up. After I checked this blog on the forum, which is blaming 3rd party fonts that may cause this issue to happen—I never installed any 3rd party fonts—I wasn’t sure if Office 2013 come with additional fonts that are not compatible with Captivate 5. So I removed Captivate 5 and installed the trail version of Captivate 7 (32 bit) thinking that Captivate 7 will be okay with any additional fonts that come with Microsoft Office 2013. Still having the same issue—can’t get the welcome screen—stuck on the loading screen. Regardless, whether I try to start the software or try to open an existing Captivate file by double clicking.
As per another blog on the forum, I also tried removing/renaming Captivate folder located in C:\Users\MYUSERID\AppData\Local\Adobe but that didn’t help either. Now I have completely removed Captivate 5 folder from the directly as I have installed Captivate 7—still stuck with the same problem.
I am running Window 7 Professional (32 bit), have the latest version of Java SE 7 Update 25, downloaded latest AIR update and of course every time removed any software, I did restart the computer to update the registration keys before installing a newer version of a software.
You help and advice will be greatly appreciated! Many thanks!
Regards,

Hello Parth.
Many thanks for your help! It worked!
After deleting every font I could (out of 820 fonts, ended up deleting 687 fonts--only 133 remined that were proected-system fonts) I am successfully able to launch Captivate 7. I guess Microsoft Office 2013 did install some fonts that conflicted with Captivate 7 (even version 5). By the way, Myriad Pro, my favorite font when it comes to Captivate, is also system-protected that I couldn't delete. I now just have to work on Part B, and slowly reinstore the deleted fonts in small batches to keep Captivate working.
Thank you again for the tip ... much appreicated!
Regards,
Farooq

Firefox not responding after I open it up

Firefox has been working fine for me and then out of the blue it stopped loading up. I clink on the icon to launch the browser and it opens a window but the web page never loads up. If I attempt to click on anything in the window it says 'not responding.' Google Chrome works fine, but every time I attempt to open Firefox the same thing happens. I have tried creating a new profile and uninstalling/reinstalling Firefox. The later worked for a while, but then Firefox suddenly started not responding again. I have also tried creating an exception for my Windows Firewall for Firefox and that does not seem to have helped either. Because of this I cannot get into Firefox to reset my browser or do anything else in Firefox, it is completely unresponsive after the window initially opens.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

SAP B1 always not responding after install in Windows 7

Dear All experts,
I have one client machine after change to Windows 7, the client SAP B1 always show not responding or seems like "freeze", cannot do any thing while user only open some marketing document. But the othes application like Ms Office or others than SAP B1 still can be respone.User have to end process the SAP B1. Sometimes it will create the dump file. Only user's machine with Windows 7 will happen this, others like Windows XP does not facing this problem.
This issue happen since user change to new machine with Windows 7. Previously, user is using Window XP and does not happen this issue. The current version is SAP B1 2007A SP01 PL 7. The work around we have done is check the FMS, addon, and reformat the machine to reinstall Windows 7, turn off UAC setting. Please advise.
Thanks & Regards
Angie

Hi,
What windows 7 edition are you using and is it one of this following :
- Professional, Enterprise & Ultimate
Edition
if yes, it is okay that you have done the work around. I suggest to consider the sql native client (sqlnc) installation. Use the correct version of sqlnc. you use 2008 version for SQL 2008 and 2005 version for SQL 2005. Also, check if you have installed .net framework 1.1 or 2.0.
What about the PC hardware and software spec. are you using B1 system requirement guidance ?
Many causes that make slow performance in B1 especially when you are using B1 2007A SP01 PL07. I said that because it is the previous PL that approved by SAP to use in win 7. So, try to upgrade to latest PL i.e. PL11. See if the problem still persists. Let's know if persists.
JimM

Storage Provider not responding after installing SCVMM 2012 R2 UR5

After installing UR5 registered storage providers show Not Responding. I had two registered, both scale out fileservers in the same domain as VMM that were working fine before UR5. Sofs running 2012R2 with latest patches
Trying to refresh provider:
Error (26101)
Storage discovery of provider {0869e333-12f6-44c7-b6b7-7139530a18c9} for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 46010.
Recommended Action
Specify valid provider, port and user credentials for storage discovery.
The other one I deleted to recreate it. The deletion yielded:
Error (26312)
Unregistering the storage subsystem with unique ID {bca715fb-ce94-47f5-9558-f8e862c3e7dc}:SS failed from VMM01.hyper-v.blaa.com with error code 46005 [SM_RC_SUBSYSTEM_NOT_REGISTERED].
However the storage provider was removed and now if I run Get-SCStorageProvider i can't see it. When I try to add it back I get an error :-(
Error (26311)
Registration of the storage subsystem ss02.hyper-v.blaa.com for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 4 [SM_RC_GENERIC_FAILURE].
Not sure what's happening but looking at the roleholder in the storage cluster I have an error in the VMI-Activity log:
Log Name: Microsoft-Windows-WMI-Activity/Operational
Source: Microsoft-Windows-WMI-Activity
Date: 2015-02-23 00:11:52
Event ID: 5858
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: xxx
Description:
Id = {99940B20-4D23-0003-FC56-D599234DD001}; ClientMachine = SS02-1; User = HYPER-V\xxx; ClientProcessId = 332; Component = Unknown; Operation = Start IWbemServices::GetObject - root\Microsoft\Windows\Storage\Providers_v2 : SPACES_StorageProvider.ObjectId="{0869e333-12f6-44c7-b6b7-7139530a18c9}";
ResultCode = 0x80041001; PossibleCause = Unknown
And a Security error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2015-02-23 00:11:52
Event ID: 4656
Task Category: Other Object Access Events
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ss02-1.
Description:
A handle to an object was requested.
Subject:
Security ID:
HYPER-V\xxx
Account Name:
xxx
Account Domain:
HYPER-V
Logon ID:
0x117FC549
Object:
Object Server:
WS-Management Listener
Object Type:
Unknown
Object Name:
Unknown
Handle ID:
0x0
Resource Attributes:
Process Information:
Process ID:
0x14c
Process Name:
C:\Windows\System32\svchost.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
MAX_ALLOWED
Access Reasons:
Access Mask:
0x2000000
Privileges Used for Access Check:
Restricted SID Count:
0

UPDATE:
Managed to get a window to reboot the storage cluster with the incomplete delete. After rebooting the registration of the storage provider completed and is now ok. Will try to reboot the other storage cluster as well.

JSP is not responding after Installing oracle Apps 11i

Hi,
I installed Oracle Applications successfully on my PC with Windows XP OS.
I used expess installation for the VIS database.
After installation all Post Install checks passed except for "JSP is not responding"
checking URL = http://kanaan.mydomain:8003/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_kanaan\vis.dbc
JSP is not responding, waiting 15 seconds and retesting.
Anyhow if I log to http://kanaan.mydomain:8003 I am being directed to a page showing :
"Oracle Applications Rapid Install Portal"
Kindly advise how to check what is wrong with JSP and how to fix.
Thanks in advance
AK

Hi,
All services are starting properly with no errors
when opening the page "http://kanaan.mydomain:8003/oa_servlets/AppsLogin"
, i recieve the error :
The webpage cannot be found
HTTP 404
Most likely causes:
There might be a typing error in the address.
If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to kanaan.mydomain:8003 and look for the information you want.
More information
Apache is running in process manager.
In apache log file the last few lines are :
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Wed Feb 28 10:27:08 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:08 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:17 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:17 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 10:27:27 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:27 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:43 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:43 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:48 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:48 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 11:54:28 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 11:54:28 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:12:21 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:12:21 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:56 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:56 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:59 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:59 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 13:57:23 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 13:57:23 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 15:35:40 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 15:35:40 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
When running the command "ps -ef | grep -i apache":
C:\Documents and ettings\Administrator>E:\oracle\visora\iAS\Apache\Apache\bin
'E:\oracle\visora\iAS\Apache\Apache\bin' is not recognized as an internal or ext
ernal command,
operable program or batch file.
Also apache is running in the processes.
Kindly advise and thanks for your help

Illustrator CS4 application not responding after install

Anyone knows how to slove this problem? I got the creative suite CS4 today and after installed dreamweaver, photoshop, acrobat reader works fine and fast except illustrator. When I opened the application and click on open a file or create a file, the application will show "Not Responding".
Anyone know how to solve it? I am using vista

Wade,
You said that Adobe's employees come and visit this forum. And you are right, Adobe's employees disguised as a regular users are here all the time.
When the CEO said Adobe hired Low Level employees I did not know then what he meant. Now I know is for damage control.
I am not only one as you can only wish. Go to Adobe Feedback forum: http://forums.adobe.com/community/general/adobedotcom_feedback
Afraid of the wolves?
Can count higher than 1000.
But you have not answer the question. Where is the CS4 update?

Program not Responding after installing PSE8

I recently upgraded to PSE8.
Since then I have noticed that when I go to shutdown my system (XP w/ SP3) I get
a window indicating a program is not responding. The title of the window is
'End Program - 9c0'. The '9c0' part is not always the same.
Last night it was 960. I've checked before the shutdown to see if there is any application
or process with a number like that and I have never found one.
I believe I keep my system free of viruses, etc. but I did do a complete virus scan
with Avast as well as Symantec. Plus spyware checks by AdAware and SpyBot.
I'm wondering if anyone else has noticed anything like this?

I have the same problem. I'm running XP SP/3, and after I installed PhotoShopElements my machine hangs at shutdown until I kill a running process. The problem goes away if I stop ElementsOrganizerSynchAgent.exe. So for now, my solution is to set the service to start manually.
Any chance of getting a fix? The program I assume performs a needed function, and I'm now without it.
Alan Stone

Garageband Not Responding after Installing Pro Tools 8 LE

So, after having installed Pro Tools 8 LE, I want to use GarageBand, and after clicking the icon, it keeps bouncing. The program does not open and on the Activity Monitor it shows and "Not responding". Any ideas? Thanks! I'm running Mac Os X 10.7.5

Que Tal Amigos, en busca de este problema en diferentes foros, me di a la tarea de traducir cada unos de sus preguntas y dudas ya que no se ingles, por lo tanto espero que se den a la tarea de traducir esto a su idioma ya que tengo la solucion de este Gran Problema que tenemos todos los que actiuaizamos a Lion OSX 10.7...buen ahi les va al parecer uno de los drivers midi de las superficies de control o interfaces de Avid 002 y 003 utilizan este para poder utilizar sus in/out midis ya que si tu eres de los que no tiene esta interfase o no utilizas estas salidas y entradas es preferible que borres o cambies de ubicacion a alguna carpeta "como la de Plugins unused" este archivo...Library/audio/mididrivers/DigiDioMidiDriver
este driver es el que crea conflictos entre Garageband,Logic y Protools, hoy lo he echo y todos mis programas van de maravilla...Protools 8.0.5, Logic 9.0.5 Garageband etc...Espero se de gran ayuda ya que estuve por muchos foros y nunca encontre la respuesta,pero mis pocos conocimientos de audio me hiceron llegar a esta conclucion....saludos y Feliz Dia De Gracias......
atte Mexicano Terco....

FireFox not responding after downloading to a Venue 11 Pro Tablet

I have a Dell Venue 11 Pro Tablet running 64 bit Windows 8.1. I can download Firefox just fine...but when I open the program it automatically goes to "Not Responding". How can I get this to work on my tablet.

We're sorry to hear that Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

PShop CS2 (Not responding) after installing

I have just reinstalled Adobe Photoshop CS2. It appears to install okay. When you start it up it appears to start okay, the splash screen appears and goes through the start up, that disappears and the normal working page appears, but as soon as I click on any menu,tool etc. it goes blank with the top left corner of the working page showing Adobe Photoshop (not responding). I also tried a "repair" from the unistaller, but no joy.
For info:
I am working on a Dell Dimension 9150 I am running XP pro sp3. AV is AVG and firewall is Comodo. I have never been able to get PShop working on this computer, so I don't think it is a PShop problem. I have stacks of disk space, and 2Gb RAM.

Presume you have solved this but if not, uninstall PS2 ( I also unistalled all other versions I had PS5, etc), re-install, then install 9.02 update.
Did all this then accessed CS2 - no probem.
Think it may be a multi-processor problem.

Why do my FaceTime and webcam not respond after installed mac os 10.7.2??please help me to solve it!!thank you!

I spent my SG$39.90 to purchsed a new version of mac lion 10.7.2. But sadly, after installed i could not open my webcam or facetime.It is very frustrating and making me very upset due to this situation.If i know like this i would never purchased the new Mac lion version!please help me to solve this problem!thanks!

You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

DVD Burner not responding after installing Mountain Lion - Macbook Pro

The superdrive can play a disc but when trying to burn a DVD with programs like DVD2Onex, Toast and DVD Studio Pro I get an error message stating, in so many words, that the drive is either busy or not responding.
It was perfectly fine until I installed Mountain Lion.
What in the world. I got some DVDs to burn. I need to burn VIDEO_TS files, not iso, imgs or anything like that. I need to know why I can no longer burn anything since installing this terrible OS.

great

HT1766 iPad not responding after installing iOS 7.0.2

Hello, I updated my iPad with iOS 7.0.2. After installation, it indicated to connect to iTunes. After connecting nothing has happened. iPad is not responding. iTunes is also not recognising my iPad! What to do?

Try recovery mode as described here.
Note you may have to try to get into recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808

Safari not responding after installing 10.6.8

After updating 10.6.8, Safari is behaving very strange. Once homepage screen is loaded in Safari, anything I do it becomes 'not responding' and have to force to quit but It works fine in safe mode. I removed all kernel extensions but no success. Crome and Fireworks work fine but only Safari has a problem.
Have anyone had this problem and know how to solve it?
Many thanks!

have you tried download (http://www.apple.com/safari/download/) safari and reinstall it?

Firefox Not Responding after Installing Microsoft Office 10

Similar Messages

Maybe you are looking for