Firefox not responding and crashes when my netbook goes into sleep mode why is that

when i shut the lid on my net book and come back nand open it , put password in and when i click the firefox icon to go back to where i was at it says firefox is not rewsponding or firefox has crashed , why is that

Try running Firefox in [[Safe Mode]]. If it works properly in that configuration, then one of your add-ons is the culprit.

Similar Messages

  • Apple tv loses home sharing when my computer goes into sleep mode

    Just recently, my Apple TV says that home sharing is off when my computer goes into sleep mode.  It never used to do that - any suggestions?

    I have the same problem here. Always back-ed up with Time Machine (OSX 10.9 Mavericks) to Western Digital drives. MyBooks, MyPassport 1TB (USB 3.0), all works fine. Time Machine is actually doing back-ups overnight. Since I got this new 2TB MyPassport Ultra USB 3.0 it's working perfect during days, but every morning when I wake up the MacBook from sleep, I get this annoying error:
    Time Machine couldn’t complete the backup to “MyPassportUltra”.
    Unable to complete backup. An error occurred while creating the backup folder.
    Latest successful backup: Today, 02:27 am
    I'm also not able to write anything to that drive, or unmount it. It stil shows up in Finder, and I'm able to read all the data perfectly fine. When I do a Disk Utility Verify Disk directly after, I get this:
    Checking volume
    disk3s2: Scan for Volume Headers
    Invalid Volume Header @ 0: I/O error
    Invalid Volume Header @ 2000021315072: I/O error
    disk3s2 is not a CoreStorage volume
    Error: This disk needs to be repaired. Click Repair Disk.
    I don't click Repair Disk, as this will probably screw up my partition. Instead, I have to unplug the USB cable (which is bad for the drive, there's no time to park the drive's heads) and plug it in again. After clicking Backup Now, Time Machine immediately starts backing up, and the drive works fine the rest of the day.
    I contacted WD Support, and they are sending me a booster USB cable. As System Information reports, the drive receives enough power though:
    Current Available (mA):          900
    Current Required (mA):          224
    Unfortunately there's no firmware update for this drive, which will probably fix this. See this topic: https://discussions.apple.com/thread/4196704.

  • When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in

    When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in
    and will then boot up again without any errors.
    I Have replace RAMS, Motherboard and Power Supply. I have check the Bio's  and Power setting on the unit. there is no place to cause this issue.
    Please help
    PC Power Tech

    Syamak,
    You didn’t specify where the beeping noise is coming from. 
    If it’s coming through your speakers, you could try to update your audio drivers since it’s possible they’re incorrectly sending a signal to the speakers as the audio chipset enters standby. 
    If the noise is coming from the motherboard, you’ll need to take a closer look at your system’s configuration or contact the manufacturer.
    I hope this helps.
    Mike
    Windows Outreach Team – IT Pro

  • The plugin container crashes if the computer goes into sleep mode or screensaver mode

    it seems everytime I put my computer into sleep mode or if it goes into screensaver mode the plugin container crashes

    Update it appears that if I leave like a video or game open while I leave or turn it into safe mode it crashes it

  • W510 does not wake up when it goes into Sleep mode - Windows 7 Bit

    Hi All,
    The Lenovo thinkpad w510 does not want to wake up once it goes into sleep mode, I have to push the power button until it shuts down completely and then reboot it completely, I have tried different settings in the power management etc. We have the same pissue on 3 different w510`s with Windows 7 pro 64 Bit
    Has anybody got a solution for this problem?
    Regards,
    Solved!
    Go to Solution.

    Hi russellwth,
    Welcome To Lenovo Forums.
    This issue has been solved with the latest BIOS for the W510. 
    Please check our Knowledge Base Article regarding this issue.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • 24" imac goes into sleep mode and lights on circuit flicker

    Hi -
      I have a 24" imac and have found that when the display goes into sleep mode the lights on the circuit flicker.
      I have searched the web and other users have complained of the same issue with no resolution.  
      Here is a similiar post - https://discussions.apple.com/thread/2606099?start=0&tstart=0.      The resolution is probably you need to get the iMac serviced,  what i'm wondering is what is the problem in the imac that is causing the issue.    Is this a defect?
      Before anyone questions the circuitry in my house here is what I have verified.
      An electrician has come and verified the electric panel is good and all circuit breakers are good.   All circuits in my house are copper, no aluminum.
      I can plug the iMac into any circuit and the problem starts right when the Imac's display goes to sleep.     I have owned the iMac for approximately 5 months now (bought it used) and the problem started about a month ago.
      Assuming this has to be serviced I dread to wonder the price .
      Thanks for anyones help.

    The sleep timeout has nothing to do with disk activity. It's based on user input, although some background processes can pre-empt it. If you don't want the machine to sleep automatically, disable automatic sleep in the Energy Saver preference pane.

  • External usb disc used for Time Machine backup disconnects when Mac has been into sleep mode

    I use a 1Tb External usb disc used for Time Machine backup which works fine, but when the Mac goes into sleep mode & powers back on I get a message stating that you should always eject the Drive before removing.
    Any suggestions on how to get around this problem would be welcome

    Look at the root of your hard drive for a folder called Backups.backupdb.
    Or, a sparse bundle disk image for one of mobile computers that might have tried to back up to your Mac.
    If you have those, remove them and try again.

  • (06 Oct 14) updated firefox and Kaspersky, now have problems with Barclays site - firefox "not responding" and plugin error on trying to close. Help!

    Updated Kaspersky to 15.0.0.463(a) - ( comes with "safe money" - now turned off).
    Updated Firefox from (old) version to 32.0.3.
    Barclays bank site loads properly, and allows access to accounts BUT when I try to look at a statement, Firefox "not responding" and a blank/ unresponsive page is displayed.
    In order to acheive any movement I have to close firefox... this gives rise to windows wanting to send error data, and Firefox apologising for loosing the tab.
    None of which allows me to do essential banking transactions.
    It is this machine that has the problem - I can access without problems via work computer (using google Chrome)

    My guess is that your statement is a PDF document, since banks and other companies often use that format for statements.
    Firefox has various options for viewing PDFs, including a built-in PDF viewer (not as full featured as Adobe's), or the option to use a plugin such as Adobe Acrobat, or to launch the PDF in an external application. This article describes how to experiment with that setting: [[How to disable the built-in PDF viewer and use another viewer]].
    On another subject, your plugin list has various plugins described as "Google Chrome Extension". I haven't seen that before. Could you review the list and see whether they really should be active in Firefox or can be deactivated?
    Open the Add-ons page using either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Plugins.
    For those that are not essential, I suggest changing them to "Never Activate". This might not take effect immediately in that window, but should disable them in new windows.

  • Mozilla constintly is not responding , and delaying when im typing. ever since i downloaded this new version.

    it constantly is not responding , and delaying when im typing. ever since i downloaded this new version.

    The Firefox pop-up blocker is usually very effective for blocking pop-ups generated by websites, but it sounds like you may have picked up some Malware that is generating those pop-ups from you own PC.
    Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
    Also, if you have a search engine re-direct problem, see this:<br />
    http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html

  • Monitor goes into sleep mode and will not wake up

    My monitor goes to sleep and will not wake up.  I try powering off and that will not respond.  I have to unplug the workstation and start back up.  I have turn off sleep to never sleep and now it just goes to sleep when Im working. 

    Hello @rosendahl14,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
    To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Try a different cable connecting your monitor to your computer
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    reference: http://superuser.com/questions/669571/windows-8-1-​64-bit-power-schemes-gone
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

    I am Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.  I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream).  When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD.  All device are on current releases of software.  I have no Video hooked up to the Apple TV.  How do I correct this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Updated to windows 10 and now my computer stays black when it goes into sleep mode

    I just updated my computer to windows 10. Whenever it goes into sleep mode and i try to move the mouse it just stays black and i have to turn my computer off and then on again. after that it finally works but its just annoying. I already tried updating my card driver, but it said it was already up to date.

    My iMac i7 quad was having the same symptoms with the blue screen and long startup times a couple of months ago.  Apple Care told me to bring it in to the local Apple Store, and after some diagnostics, the hard drive required replacing.  It took one day to replace the hard drive and my iMac is running great. I only had the iMac for about 12 months when the drive needed to be replaced.  Not sure if that is your Mac's problem, but it was for mine.

  • HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

    My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode.  Once it goes into sleep mode, it doesn't wake up if a print job is sent to it.  If I wake it up manually by pressing the blinking on/off button, it still doesn't print.  If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print.  I've installed all available updates.  I also assigned a static IP address in an effort to correct this but nothing helps.  I see that others have complained about this problem, but I do not see that anyone has had success resolving this.  My operating system is Windows Vista.  I use a Link-Sys Wireless G Router.  Thanks.
    This question was solved.
    View Solution.

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • RBDAPP01 going into SLEEP Mode and Idocs still in 64 status

    Hey all,
          I have a Inbound Idoc interface which is being processed using RBDAPP01 Program. The Issue I am facing is that the job running the rbdapp01 program goes into sleep mode even though there are idocs present in 64 status. I tried to debug the work process using SM66 but it does not open any debugging window although it says debugging started. If I cancel the Job and run it again it processes those Idocs Any input on how one can resolve this issue?
    Thanks.

    Hi Aparna,
    Here is extract from SAP material on running RBDAPP01 transaction and possible reasons for delay in processing. HOpe this can help you.
    To automate the treatment of IDocs, you must run the ABAP program RBDAPP01 (transaction BD20) in job. This program has a very good option for parallel processing which can reduce a lot the time required for treatment. However use it carefully and make sure you set a packetsize high enough to avoid that your SAP system be overwhelm by demands for available dialog tasks (don't forget one dialog task is monopolized per IDocs packed to treat).
    Best Regards,
    Krishna

  • My macbook boots up and only stays on for 30sec and goes into sleep mode

    My macbook boots up and only stays on for 30sec and goes into sleep mode! Any suggestions as to why this might be happening? Thanks....

    I assume you have checked your sleep settings in System Preferences>Energy saver
    I also assume this has just happened recently and spontaneously, not after installing any particular hardware or software or you would probably have mentioned it...if anything new has been added recently, obviously just remove it!
    It could be the battery - have your tried it just on mains? If it's a pre unibody MacBook try it without the battery at all. This could happen if you have a non-Apple (cheap Chinese) replacement battery.
    Try NVRAM, PRAM & SMC resets (Google if you don't know how)
    Try booting from the install media and repairing or reinstalling OS X. (Back up first!)
    Just out of interest if you boot from a DVD or go into Open Firmware or Boot Select modes, does it still sleep after 30 seconds or is it just in OS X?

Maybe you are looking for