Firefox not saving passwords - Mac Pro

Hi.
I recently had to reinstall my bootdrive and software. Since then Firefox will not save my passwords. I am using a Mac Pro OS 10.6.8,
Firefox is 33.1.1. I thought it was firefox, so I tried Safari and Chrome - same problem. My preferences are set to "Remember passwords for sites". There are no exceptions listed. There are no saved passwords listed either. Under Privacy > History. "Remember history"
I would appreciate any suggestions.
Thank you in advance.
Brian

Make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history;Use custom settings for history -> Always use Private Browsing mode).
*https://support.mozilla.org/kb/Private+Browsing
It is possible that there is a problem with the key3.db file and the logins.json (signons.sqlite) file that store the encrypted names and passwords in Firefox.
You can rename the key3.db file (key3.db.old) and logins.json file (logins.json.old) and a possible signons.sqlite file (signons.sqlite.old) or move them to another folder to make it possible to undo the action.
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost.
If that has worked then you can remove the renamed files that are no longer needed.
Otherwise you can rename the files to their previous names (key3.db and logins.json).
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Similar Messages

  • Firefox not saving passwords, what maybe blocking this pls

    I am using firefox 3.6.18 (because it is compatible with my A/V) and it no longer saves passwords. I suspect something may be blocking this; but have no idea.

    Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
    If the latter happens then you have a problem with cookies that are not kept or the file that stores the cookies is corrupted.
    * http://kb.mozillazine.org/Websites_report_cookies_are_disabled (Other Solutions)
    You Firefox doesn't offer to store password in the Password Manager then check that you aren't running Firefox in [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Automatically start Firefox in a private browsing session"
    Some sites like PayPal, Yahoo, Windows Live and bank sites use autocomplete="off" to prevent Firefox from saving and filling the name and the password.
    If a site uses autocomplete="off" then look at this article for a bookmarklet to remove that autocomplete attribute and Firefox will offer to store the name and password.
    * http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
    * http://kb.mozillazine.org/Password_Manager

  • Firefox not saving password ? its save password in memory but show me logout , Again and Again i have to click on login button ?

    I have Already Click on Remember Password but when i open some sites then i have to again click on login button

    '''cor-el''' No offense but why are the end users having to now become programmers ? Shouldn't Mozilla be taking care of these issues that keep coming up ? FF 7 was working ok for the first week then it died & went to the browser heaven neighborhood.. I have lost several add-ons that I use & have lost OpenOffice which was working just fine pre 7 .. It '''Hangs''' constantly although I have the quick fixes for that but don't understand why I should need to keep doing it.. This is starting to be like using IE & quite honestly I am no longer satisfied with FF after 4 update.. Perhaps "Quick Releases" doesn't equate to "Quality Products".. As an end user that's how I want to stay I shouldn't have to keep doing all these little exercises to get this browser to work properly.. I retired from being a systems analyst yrs ago & no longer want to wear that hat or anything like it I just want to hit enter & get a quality response..

  • IMessage and FaceTime not working on Mac Pro and message stating to contact Support came on

    iMessage and FaceTime not working on Mac Pro and a message stating to contact Support came on with a verification code.  It was working on 8/29 but stopped on 8/30.  When I called support to even speak with anyone they wanted $19.  I don't want to pay $19 for an Apple problem.  I cleared my key chain, also reset my apple ID password but still not working.  Works fine on my iPhone.

    There is no official public documentation of that error message as far as I know, but according to reports, it can mean (at least sometimes) that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a free service.
    Otherwise, do what the error message tells you to do. According to reports, you won't be charged for the call if you select "Apple ID" as the product you need support for, and cite the customer code in the alert as the "validation code" to the support representative.

  • Firefox not remeber password for certain websites.

    Firefox not remeber password for certain websites.For eg Hotmail.com and freelancer.com. When first time i entered details it asked to remember password, even in saved passwords i can see the password but when i go to these websites username use to be there but no password. but password is saved in Firefox and i can see using show password option.

    You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page.
    *https://support.mozilla.org/kb/how-do-i-manage-website-permissions
    In case you are using "Clear history when Firefox closes":
    *do not clear the "Site Preferences"
    *Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

  • 2nd generation shuffle won't take charge, not recognized by mac pro.

    2nd generation shuffle won't take charge, is not recognized by mac pro. light will not go on

    Hi nickh2913,
    If you are having issues with your 2nd Gen iPod Shuffle, you may want to try the steps in the following Troubleshooting Assistant:
    Apple Support: iPod shuffle (2nd generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/shuffle2gen/
    Regards,
    - Brenden

  • Windows mail not saving passwords

    We have windows vista business. It's not saving passwords for email accounts. I tried disabling avg and online armor but the same things happens. I tried entering the passwords in tools>accounts>(account)>properties>servers but it doesn't save
    it.

    Post your problem here to get a better assistance:
    http://answers.microsoft.com/en-us/outlook_com/forum
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • USB superdrive not working with Mac Pro

    Is there a trick to getting a USB Superdrive working with a Macpro?
    The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
    Any pointers in the right direction would be much appreciated.

    I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to  to  "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
    Try going to; System Preferences/ CDs & DVDs
    Change these two settings to this:
    When you insert a blank CD: Ask what to do
    When you insert a blank DVD: Ask what to do
    NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
    And
    Then go to Finder Preferences
    Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
    Try to burn the DVD again (reload Disc- perhaps restart) and try again.
    Don't know how these setting changed but they did. It worked for me.
    Message was edited by: pj176

  • I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
    Matt

  • Firefox not remembering passwords or usernames. Have done all that's suggested, still no luck.

    Firefox not remembering passwords or usernames. Have done all that's suggested, still no luck.

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    To see all History and Cookie settings, choose: Firefox > Preferences > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"
    Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?<br />
    There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page.<br />
    The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
    If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you and you need to sign in once again.<br />
    * http://kb.mozillazine.org/Cookies
    * http://kb.mozillazine.org/Password_Manager
    * https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords

  • Teltra Bigpond Ultimate wireless mobile not working On Mac pro

    Can Some-one show me what to do as my teltra bigpond ultimate mobile device is not working on Mac pro but work on my other windows. Teltra staff help me and download new software but it is stll not connected to internet. Spent hours on bigpond support and they could not fix it.
    Thank you in advance

    Try booting in 32-bit kernel mode.
    Mac OS X v10.6: Starting up with the 32-bit or 64-bit kernel

  • Epson Perfection 4490 photo scanner will not on latest mac pro

    My epson 4490 scanner will not work on my new mac pro. Downloaded the lastest driver from epson and nothing.
    Any ideas guys?
    Much Appreciated

    The issue commenced with 10.5.2
    Here is the answer from Epson, and it works:
    To get the Epson Scan scanner driver running on the Intel Core Duo mac, a
    complete cleanout and reinstall may be required.
    In this case we would recommend using the following steps to get a full
    cleanout of all hidden files from earlier Epson Scan version(s) and a fresh
    install:
    UNINSTALL
    Note: the files found will vary by OS and driver version. Not all files and
    locations will be present. If one file cannot be found, just skip to the
    next item. If an EPSON SCAN or EPSON SCANNER named file is found in an
    adjacent location, you can trash it. Do not remove any other EPSON files.
    1. Go into HD, APPLICATIONS, UTILITIES and open ACTIVITY MONITOR. Highlight
    the EPSON SCANNER MONITOR process and click STOP or QUIT PROCESS to FORCE
    QUIT the process. Close ACTIVITY MONITOR.
    In HD, APPLICATIONS - move EPSON SCAN and EPSON SCANNER MONITOR to the
    trash.
    2a. In HD, LIBRARY, APPLICATION SUPPORT, EPSON - remove EPSON SCAN, if
    present. Also check the contents of the Epson folder. Remove only files
    inside it that are related to the scanner, for example EPSON USB SCANNER or
    EPSON FW SCANNER BUNDLE.
    2b. Check in HD, LIBRARY, APPLICATION SUPPORT. There may be other Epson
    files. Any files to do with the Epson scanner name or Epson Scan you can
    remove from here.
    3. In HD, LIBRARY, APPLICATION SUPPORT, TWAIN*, TWAIN DATA SOURCES - remove
    EPSON SCAN, if present, and any files bearing your scanner's name. (*The
    Twain folder may not be present on all OS 10.4 Macs.)
    4a. In HD, LIBRARY, IMAGE CAPTURE, TWAIN DATA SOURCES - remove any Epson
    scanner-named ".ds" files, for example the bearing your scanner's name,
    EPSON STYLUS or PERFECTION #### X.ds
    4b. In HD, LIBRARY, IMAGE CAPTURE, DEVICES, remove EPSON SCANNER.DS, if
    present
    (This is a generic resident scanner driver. Once the Epson scanner software
    is working properly it will not be needed, so it can be deleted.)
    5. In HD, USERS, (YOUR USER NAME), LIBRARY, PREFERENCES - remove EPSON
    (scanner name ####) PREFS, if present
    6. In HD, USERS, (YOUR USER NAME), LIBRARY, PREFERENCES, EPSON - remove
    EPSON SCAN and EPSON SCANNERMONITOR PREFS, if present
    Once the above files have been moved to the trash, you do not need to empty
    the trash. Simply restart your Mac. You are ready to reinstall.
    DOWNLOAD
    If you have not done so already, use the following steps to obtain the
    download for the new Intel Core Duo driver:
    1. Go to http://support.epson.com
    2. Select Scanners, then Epson Perfection Series, then your scanner model
    name.
    3. Under DRIVERS & DOWNLOADS select Macintosh.
    4. Download only the driver marked for the Intel Core Duo system.
    Installation instructions:
    1. After download is complete, double click the icon that appears on your
    desktop. This will create a disk image on your desktop.
    2. Open the disk image.
    3. Double-click the EPSON SCAN INSTALLER icon to begin the installation.
    4. Enter password and follow prompts to install the driver. At the EASY
    INSTALL option, use the up/down arrows and select CUSTOM Install. Check
    ONLY your scanner model before clicking INSTALL.
    5. After installation is complete, quit the installer and restart the Mac
    before testing.
    To test this driver, do the following:
    1. Launch Epson Scan by going into your HARD DRIVE, APPLICATIONS, and EPSON
    SCAN.
    2. If prompted, select your scanner from the list of models and click OK.
    3. In the FILE SAVE SETTINGS window, you can designate the location, name
    and type of file the scans will be saved as.
    -LOCATION defaults to HD/USERS/(YOUR USER NAME)/PICTURES. Click CHOOSE if
    you wish to change this.
    -PREFIX determines how the scan will be named. Type any name you like. You
    can also designate a start number.
    -FILE TYPE dicates what format the scans will be saved in. ie. .JPG, .TIFF,
    .PDF, or .PICT)
    -For example: if the prefix is "img", the start number is "1", and the
    format is "JPG", the name of the file saved in
    PICTURES will be "IMG001.JPG"
    4. Click OK once settings are changed as desired.
    5. The EPSON SCAN window will open and begin scanning in FULL AUTO MODE. In
    FULL AUTO MODE the software makes all the decisions for you (as to what is
    being scanned, where it is on the flatbed, etc). This is the easiest way to
    scan.
    6. If you want full control over the scanning process click PAUSE and
    change FULL AUTO MODE to HOME MODE or PROFESSIONAL MODE. In the latter two
    modes you can change your scan settings as desired. Click SCAN after you
    have selected your settings. Click CLOSE once the EPSON SCAN is finished
    scanning.
    7. When scanning is complete, your images will be saved in the location
    specified on FILE SAVE SETTINGS, with the prefix and in the format you set.

  • Mail Not Saving Passwords

    OK...here's my system config: MacBook Pro, 17" (MacBookPro2,1), OS X 10.4.10 (8R2232). So running the latest version of Mail.
    Please note that my Jabber account in iChat is exibiting this exact behavior.
    Basically, every time I start mail, it asks me for the password for each of my mail accounts. This has happened before, so at first, I thought nothing of it. Then, when I realized that it was every single time, I looked in prefs and realized that the password field was blank for each account. So, doing what I thought made sense, I went through each account, added the password, and saved it.
    Then, the next time I launched mail, it did the sam thing: asked me for the password for each account. I looked, and low and behold, the fields were blank again. So, I added the password to one, saved it, then clicked on it again, and yes, again, it was blank. So basically, Mail is not saving the passwords to my accounts. All other information can be changed and it will save properly.
    I went to Keychain Access and did a repair on the Keychain, and it fixed nothing. Is this a Keychain corruption? Do I have to delete my entire Keychain to fix this problem?
    Help!

    Post your problem here to get a better assistance:
    http://answers.microsoft.com/en-us/outlook_com/forum
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Firefox not remembering passwords

    My Firefox remembers a couple of passwords, but for other sites it doesn't. These sites are definitely not listed as exceptions (under Tools, Options etc), and are not blocked by the website (passwords can be stored in IE, Chrome etc). In one case, we have 3 gmail accounts and Firefox will remember 2 of them, but not the third. With that 3rd gmail account, I did select the "never remember this password" option initially, but now want to change that and the website is not listed as an exception, so I can't change it. How do I fix this? Can I completely reset the Firefox password facility?

    There are no password exceptions listed at all - that's the confusing thing. And there are no blank entries in Saved (Show) Passwords. There are two saved passwords and both of them function no problems, but I want to have more saved passwords.
    Would it make any difference to remove the saved passwords that are there (even though both of them function properly)? Is there any way to reset the whole passwords feature so that when I log in to a site I'll be asked again and will then be able to save passwords?

  • Firefox not remember password fot phpbb forums :(

    Firefox have problem with phpbb forum. Password remember function is not functional. Maybe some internet banks too (Opera not have this problem...)

    There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically.
    The latter involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
    If this "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you and you will have to sign in once again.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed
    In case you are using "Clear history when Firefox closes":
    *do not clear the Cookies
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.
    Some websites like the Yahoo server use autocomplete=off to prevent Firefox from saving form data like name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox store form data like names and passwords.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    Note that Firefox won't auto-fill saved form data automatically when autocomplete=off is used, so you need to double-click the empty name field to get a drop-down list.

Maybe you are looking for

  • Remote Access VPN Users with CX Active Authentication.

    I have ASA 5515 with CX for webfiltering , also have enabled remote access vpn . All my inside users are able to get active and passive authentication correctly . But for remote access VPN users , they are redirected to ASA external ip and CX authent

  • Issue while writing a query in table type select.in the physical layer

    Hi gurus, I am actually trying to create a table using select in the physical layer..... i acutally am not aware what it is called but its when i click a table in the physical layer i have an option table type and i chose select which allows me type

  • How can I change a layout margin to print?

    Many thanks for the last bit of info. However, I designed a card to have .5" margins all round, but the right margin on the layout shows an extra 1/8th of an inch greater on the right margin than the .5" margin showing everywhere else. Why can I not

  • For those of you who cannot afford a proper video editing system...

    ...don't buy any prosumer video editing program (including Premiere Pro CS5.5). Here's why: Last night, I ran the PPBM5 test on an Intel i3-2100 system with 4GB of DDR3-1333 RAM, a 500GB OS drive and a 1TB project drive (both drives are 7200 RPM) and

  • Remote Control Panel

    Hi, I am trying to use the remote control panel. I have already enabled the server manager, browser settings and publish the relevant vi. On another Pc running the web browser with Labview runtime 8.1 installed, I am able to view the vi html page but