Firefox problems after changing OS

I changed my OS from a 10.3.9 to a 10.4.6 [archived the old stuff] and suddenly my Mozilla Firefox 2.0.0.11 version ( January 2008) makes my Yahoo email a jumble of simplified blue and black lined pages. I tried reinstalling it - and nothing's new. Ideas of how to get it going right? [I have asked a Firefox forum...and nothing's responded there, yet].

It is a shame the AD is so sluggish, and posting and reading is not faster, so I will try to be complete in one post, and also I will be leaving fairly soon for much of the remainder of the day.
Quit Mail, and in the Finder open Home/Library/Mail and see if you can find two POP account folders. One should have some reference to your Username and/or server used for embarq -- that is the "good one". There should be another, and likely it still contains some reference to the Earthlink account data in the name. You need to drag this old account folder for the Earthlink account out to the Desktop. Once on the Desktop, open this account folder and find the INBOX.mbox folder -- rename this folder to something like OldINBOX.mbox. Also, find the Sent Messages.mbox folder and rename it in similar fashion. Back in the Mail folder, locate and open the Mailboxes folder and drag OldINBOX.mbox and OldSent Messages.mbox folders into the Mailboxes folder (assuming no folder in there has that name, which is unlikely). If you needed the old Drafts you can do the same with Drafts.mbox. Now, return to root level of the Mail folder and locate the file named Envelope Index and drag it out to the Desktop or simply delete it. Do the same with any other file with Envelope in the name if there is one.
Once all this is done, relaunch Mail, and it will announce it is ready to Import your mailboxes -- let this continue and it will really only be reindexing your mailboxes, including those you just added to the Mailboxes folder. Once the reindexing has finished, your should be able to see all messages in the Inbox of your new embarq account, and lower down in the Sidebar you should see OldINBOX and OldSent Messages listed, and be able to open those.
If there is any doubt, the reference to Home is to the folder that results when you click on the House Icon in the Sidebar to the Finder window. Also, if any doubts or concerns, post back and I will respond when able.
Ernie

Similar Messages

Problem after change logon module

Hi,
i'm using EP 6.0 SP13
I want to change my logon page.
the branding_image & branding_text i was changed.
ther are so many forums available regard to logon page.
now i just want to change the copy right tag & remove saplogo from the logon page.
both are referenced in umLogonBotArea.txt
i'm done all step according to help.
now problem was after changing the logon module when i run portal it's give a dump instead of logon screen
when i revert back the original logon screen appear.
so how can i solved this?
regards,
kaushal

Hi Kaushal,
Have you tried the option of going to Direct Editing and changing the logo.
For this goto System Administration-System Configuration-UM Configuration-Direct Editing.
Check the following properties.
<b>#Defines the logon image
(Type: String, Default: '/logon/layout/branding-image.jpg')
ume.logon.branding_image=/logon/layout/branding-image.jpg
#Defines the second logon image (e.g. containing text)
(Type: String, Default: '/logon/layout/branding-text.gif')
ume.logon.branding_text=/logon/layout/branding-text.gif
</b>
Give path of your desired image in ume.logon.branding_image and <b>restart the server</b>
Regards
Rajeev.
Do award points for helpful answers in SDN

WiFi problems after changing from WEP to WPA on Actiontec router

I need some help/advice--I've searched the forums but am not seeing my exact problem described so decided to describe it to see if the community can help me figure out what to do now. The situation is this: After recently learning about the insecurity of WEP "security" I decided to change the security settings on our Fios router (an Actiontec MI424WR, Rev C). I first tried to change the settings to WPA2, but then my husband's elderly Dell laptop could not connect, so I changed them to WPA. At first everything seemed fine--we could connect to the internet from our computers (my MacBook Pro, his Dell, and various devices--phones, kindle, iPad).
But we soon noticed some strange problems that I was never able to resolve:
I could never get either of two Airport Expresses to connect to the network, even after repeated tries (with hard resets in between)
Within an hour or two after rebooting the router, I was no longer able to connect wirelessly to a NAS device that is connected to the router via an ethernet cable--I could no longer even see it in the Mac finder. I could see it in Windows Explorer from the Dell but could not connect.
Similarly, I lost contact with a Sonos bridge unit that is also connected to the router via an ethernet cable. In this case the loss of contact was sporadic--various devices that connect over WiFi to the bridge could sometimes see it, sometimes not.
Resetting the router would temporarily restore wireless access to the devices hardwired to the router, but I would always lose the NAS device completely after an hour or two and the Sonos bridge sporadically. The computers and devices, however, had no problems connecting to the router itself and from there to the internet.
I finally gave up and returned the security to WEP, and now everything is fine: the Airport Expresses connect, the NAS remains available, and the connection to the Sonos bridge over WiFi is robust (the Sonosnet mesh, if anyone is wondering, was never affected).
I can't understand why switching to WPA caused such problems, but it clearly did, since switching back to WEP eliminated them completely. The simplest explanation is that there is some problem with the wifi portion of the rev C router that only becomes apparent in certain circumstances, though it seems weird that both wired peripherals and wireless airport expresses were affected.
Whatever the causes of the problem, now I'm back to wondering how to improve the security of my network. Should I:
See if I can convince Verizon to replace the modem with a newer version? We have had this one for more than 4 years, since we first got fios.
Just go ahead and purchase the most recent version of the Actiontec router (rev G)? It's only about $115--worth it to me if I can use WPA with it.
Buy our own wireless router, perhaps an Airport Extreme, and turn off the wireless on the Actiontec.
Thanks in advance for any help. This is driving me crazy, and I really don't like feeling as if the network is vulnerable, especially given how extensively we use it.
Becky

This doesn't sound too uncommon. I had similar issues in the past with some networks I've worked with that were resolved by moving the router actually to WPA2 or by updating the firmware. The ActionTec MI424WR Rev. F, G, and I require the use of WPA2 since they have Wireless N radios in them so WPA wouldn't be of much use. My old Linksys WRT54GX also had similar issues, but that was a result of the Wireless Radio dying along with a mix of newer hardware not playing nice with the old, no-longer-supported firmware. I retired that router, only to bring it back into service as a Wired router at a friend's home (shutting off Wireless and setting up another as an AP) which replaced an old BEFSX41 which didn't have enough power to handle his Cable connection.
Besides a few software bugs at play somewhere, there isn't much that could cause the wireless to slowly stop working like that. I would suggest moving back to WPA2. For the older Dell laptop if it's running Windows XP, make sure at least Service Pack 3 is installed if it hasn't been getting updated. Also, check for updated drivers for the Wireless card since they may be needed as well. A bit of searching on the Wireless card should also indicate whether or not it supports WPA2 encryption. Anything from the mid-2000s should support it.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Problem after changing hostname

I wanted to change my hostname so i followed the following instruction, as given by one of the members in this forum
Edit /etc/hostconfig.
Add the following line:
HOSTNAME=$HOSTNAME
where $HOSTNAME is the hostname you want to set.
That change will take effect after a reboot.
If you want the hostname to show up at the prompt,
add a line similar to the following one to your
.bash_profile:
PS1='\h:\w \u\$ '
where \h is the hostname, \w is the working directory
of the current user and \u is the name of the current
user.
MacBook 2.0 GHz/2.0 GByte ; MacPro
PLEASE READ THE FOLLOWING FOR THE NEW PROBLEM
I did what was suggested, and things have gone wrong. I made the changes and booted the computer.This is what i am getting now:
localhost:/root# CSRHIDTransitionDriver::stop
IOBluetoothHCIController::start Idle Timer Stopped.
Now i dont know what to do, i booted the system from the cd, went to terminal and thought of changing the hostconfig file, again (back to original), however, there is no vi or any editor available.
When ever i boot the system i presented with a root prompt. I went to /etc and tried to remove HOSTNAME=$XXX, but the system is not allowing me to make any changes.
What can i do now? Please guide. I will appreciate a quick response as i whole of my research work is in my laptop

Hello, Thanks for giving me directions.
1) Ok if its not clear to you, then i will explain again.
I wanted to change the hostname of my computer since whenever i open a terminal i use to get as command prompt like myfullname@somealphanumericcharacters. So i wanted to change the alphanumericcharacters. I was suggested to go to /etc and add HOSTNAME=$something. I did that (using sudo), rebooted the system and i am getting the following message:
localhost:/root#CSHIDTransitionDrivers::stop
IOBluetoothHCIContrller::start Idle Timer Stopped.
and when i hit enter i am given a root prompt:
localhost:/root#. I thought since i am root i can change the /etc file. So i tired using vi but i am given following msg:E483: Can't get temp file name(twice) Hit Enter to continue.
when i hit return, vi open the file and when i try to remove the entery i am given the following msg: Warning changing a read only file,E303: Unable to open swap file for hostconfig, recovery impossible.
I tried to change the permissions, using chmod, but i cant, same msg: file is read only.
I can see all my datafiles, but can't access them. DOnt understand if i am root why cant i make changes.
Furhter, while doing reboot, pressed Command+V, lots of things which dont make sense to me, however, i did find the following:
CSRHIDTransitionDriver::probr:-v
CSRHIDTransitionDriver::start before command
/etc/rc:line 14: XXXX unbound variable (XXX is the hostname i wanted to add, this is what i added to hostconfig file)
Paril8 18:28:04 launchd: /bin/sh on /etc/rc terminated abnormally, going to single user mode.
I went checked/etc/rc, was not able to find the variable XXX.
I tried what you suggested, cd /Volumes/Macintosh HD. But i am not able to change anything. if i try vi, it is not recognized. SO this is all i got. Please help
macbook Mac OS X (10.4.9)
macbook Mac OS X (10.4.9)

Pro-Active Caching Problems After Change that requires Re-Process of Cube?

We currently have Pro-Active caching setup at one of our clients to provide a near real-time refresh.
We are using SQL Server 2012 SP1 Cumulative Update 4.
We are using Views and a Linked Server to pull data from an Oracle Data Warehouse source.
The Pro-Active caching is set-up using a Polling Query which polls for changes every 2 minutes and the silence intervals are staggered to try and assist with processing.
I had significant problems with this setup with Pro-Active caching stopping on several occasions. What was a cause for concern is that the stoppages have occurred on several occasions without any errors being recorded in the Event Log or Flight Recorder
to indicate what went wrong.
This lead to me setting things up as follows to get a stable setup that has been running for several days now :-
- All Dimensions Pro-Active Cache Refresh - 2 Minute Polling Query (Staggered Silence Interval)
- All Measure Groups Pro-Active Cache Refresh - 2 Minute Polling Query (Staggered Silence Interval)
- 2 Measure Groups that had long running Polling Queries had to be scheduled via SQL Agent because no matter they would continuously stop when scheduled via Pro-Active caching. SQL Agent job processes 2 x Measure Groups.
However I have an issue? When I make changes to the underlying database views that do not necessitate a re-process Pro-Active caching runs fine and records the change.
If I make a change to the solution however that necessitates a re-process of any of the Dimensions and Cubes then I have "HY008 - Operation Cancelled" messages in the Event logs for at up to 6 hours before they then disappear.
The errors in the Flight Recorder indicating the detail behind these messages say "Server: Proactive caching was cancelled because newer data became available" and "The
operation was cancelled because of locking conflicts".
I know the first message can appear because of Late-Arriving Facts but I believe we have dealt with this via the Ignore Errors/Unknown member option and why do these message disappear after 6 hours and everything appears stable again?
I appreciate anyone's thought on this?
Is Pro-Active caching stable in the version of SQL Server 2012 we are using?

Never mind. I have solved this myself. The system has been a lot more stable since retiring the SQL agent Job that did the manual processing of the measure groups and switching to Pro-Active caching instead using MOLAP caching only (ensuring
no ROLAP was used).

CS4 printing problem after changing printers

Windows7
Photoshop CS4
printer was HP Officejet Pro 8500
have many files created with this printer installed. They printed successfully, except for "usual sporadic" error of "needing to install a printer before able to print". Would shutdown Photoshop, bring it up and print.
Installed new printer HP Officejet Pro 8600.
Files created when 8500 in use will not print on 8600. Get same "usual sporadic" error, except shutdown doesn't resolve problem.
New files created after 8600 installed print fine.
Any ideas how to solve this now BIG problem?

On a hunch, try going through the printer selection process then press Done. Do this twice, but don't print. Then try to print.
If that doesn't work, after selecting the printer twice, save the PSD and shut down Photoshop, then restart it and load the file.
There was a glitch back then where printer settings were getting "staged" in some intermediate place, so that one literally had to make changes twice to get them to "stick".
If the above doesn't work, once you've selected the printer, try going through the [Page Setup] twice. I know there was a combination that would "flush" the changes through.
-Noel

Satellite C850-1cp problems after changing italian keyboard

Hi
i've bought a toshiba Satellite C850-1cp and i had some problem (i dropped some coffee on the keyboard)
so i brought the mobile to the tech support and i decided to change the native keyboard (EN) with an italian keyboard and now i have problem with the usb port: any mouse, or others usb device are not recognized.
A friend of mine told me to restore win 8 unsuccessufully because the function keys don't work....
Please help me

In the past Ive changed keyboard several times and everything went well.
Have you used 100% compatible keyboard?
Ok maybe you should install original recovery image after keyboard replacement. To start recovery image installation you don't need function keys.
If you use Win8 make complete shutdown as described on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after doing this restart your notebook and use F12.
Please post some feedback.

Anyone else have firefox crash after changing facebook privacy seting

I didn't like the recent changes to my Facebook page so I clicked on stopping the news feed I then went into privacy settings and op'd out of public to friends only. It was then I noticed the app. setting and was surprized to find a list of web portals and sites I had visited using MSN I clicked on disable and of course FB said Warning! friends now can't send you things like pictures. Big Deal. I made mistake of leaving FB on and using Firefox went to CNN to read news. I left computer on while I went to supper and when I came back and tried to use Firefox it crashed! I never have had a problem before using this either at home or work.

Yes. I've had this problem developing over the past several weeks. I thought it was a bad extension so I removed them one by one. Then I actually removed and re-installed but that didn't solve he problem. I've now removed it and switched back to Safari until I read an acknowledgement and a fix from Mozilla.
I'm not sure this is related but it's sure one heck of a coincidence... My Yahoo Messenger was taking an extremely long time to launch. I'd get the spinning beachball for upward of 30 seconds before I'd see the logon screen. Since removing Firefox that problem seems to be gone as well. Just for reference, I had been using the latest release of Firefox.

HP 255 given problem after changing the cooling fan.

Please help, this is urgent. I changed my HP 255 cooling fan after it stopped working. when i finished replacing it with new one, i coupled back my computer and put it on. it came up with a message that the selected boot image is invalid, after series of troubleshooting by going online, i was able to eradicate the message. But am always stuck at a message that said recovery, your pc needs to be repaired. an unexpected error has occured. error code:0xc0000185. i tried repairing the operating system but there was no success. i was able to the a system recovery using HP recovery manager, the recovery was successful, but when i reboot pc after completion of recovery, it still returned me back to the message that my pc needs to be repaired. I cant even boot from the cd because i feel like downgrading it to Windows 7. Please help me, the computer is urgently need to complete my project work.
thanks

Hi - firstly, did you use any sort of ESD protection whilst working on the machine? This should be a priority due to the sensitivity of the devices on the motherboard.
Before suspecting the worst, I would make some basic checks on the hard drive. Firstly, double check it has been firmly pushed back on to the connector (I know, you have probably done this already!)
Restart your computer - when it goes through the repair process, it will offer you advanced tools - click on this.
Select Command Line (CMD) - this will give you a black window with white text. Type the following then hit the enter key -
chkdsk /r
This will take what seems like forever but let it do its thing - hopefully you just have some damaged sectors, this will find and "repair" them (actually moves the data to a better part of the disc and marks the bad sectors so they don't get used in future). Sometimes this is enough to get things working again. When it has finished, you might want to check the system files, if not, simply restart the machine but if you do, type the following into the command line -
sfc /scannow
Again this will take some time but it will find most problems with system files and replace them, however it isn't infallible.
Let me know how it goes....

Edit Problem after changing and transporting a table view

Hallo Experts,
I hope you can help me.
I changed a Z-table in the Data Dictionary. For this table there exists an Tableview.
After I added three new fields I generate a new tableview:
Utilities -> table maintenance generator
Change -> create maintenance screen -> ok
after this I optimized the layout of the screen.
On our Enviromentsystem my Tableview works perfect.
I can make changes in the table.
Then I transported the new tableview to our testsystem.
There I started the sm30 "Maintain table view" and tried to change table entries.
After a click on "Maintain" the following Message appears:
TK 730 Changes to Repository or cross-client Customizing are not permitted.
The strangest thing is, that before my transport, it worked, I could change table entries.
There were no changes on the userrights.
And I can change a similar table on the testsystem.
I compared the properties of both tables. But I could not find a difference.
Have anybody an idea where the error can be?

Hi
Caution: The table is cross-client
Message no. TB113
Diagnosis
You are in the process of maintaining a cross-client table. You are using the standard table maintenance screen here, which is frequently used to maintain client-specific Customizing entries. This message serves to warn you that each change you make will have an effect on all other clients in the system.
System response
You have the authorization required for cross-client maintenance.
Procedure
Think carefully about the effect of your changes. Due to logical dependencies between client-specific Customizing and applications data on the one hand and cross-client Customizing data on the other hand, changing or deleting cross-client data could result in inconsistencies.
Therefore such changes should be carefully planned and coordinated, taking all the clients in the system into consideration.

Filter plugin. Problem after change image depth.

Hi All !
I already wrote filter plugin it work fine but only for image depth 8bit, after i change image depth on 16 or 32 bits I getting error msg box from photoshop.
I try change on 'destination.colBits = 8' or 'destination.colBits = pChannel->depth' or ' (pChannel->bounds.bottom - pChannel->bounds.top) * pChannel->depth;' but all the same.
PixelMemoryDesc destination;
destination.data = data; //*pixel
destination.depth = pChannel->depth;
destination.rowBits = (pChannel->bounds.right - pChannel->bounds.left) * pChannel->depth;
destination.colBits = 8;
destination.bitOffset = 0 ;
Please help someone !
Very Thanks in Advance !
All code below:
// Gauss.cpp
// gauss
// Created by Dmitry Volkov on 30.12.14.
// Copyright (c) 2014 Automatic System Metering. All rights reserved.
#include "Gauss.h"
#include "GaussUI.h"
#include "FilterBigDocument.h"
#include <fstream>
using namespace std;
SPBasicSuite* sSPBasic = NULL;
FilterRecord* gFilterRecord = NULL;
PSChannelPortsSuite1* sPSChannelPortsSuite = NULL;
PSBufferSuite2* sPSBufferSuite64 = NULL;
int16* gResult = NULL;
void DoParameters ();
void DoPrepare ();
void DoStart ();
void DoFinish ();
void DoEffect();
void GaussianBlurEffect(ReadChannelDesc* pChannel, char* data);
void ReadLayerData(ReadChannelDesc* pChannel, char* pLayerData);
void WriteLayerData(ReadChannelDesc* pChannel, char* pLayerData);
DLLExport MACPASCAL void PluginMain(const int16 selector,
                                    FilterRecordPtr filterRecord,
                                    intptr_t * data,
                                    int16 * result)
    sSPBasic = filterRecord->sSPBasic;
    gFilterRecord = filterRecord;
    gResult = result;
    try {
            if (sSPBasic->AcquireSuite(kPSChannelPortsSuite,
                                               kPSChannelPortsSuiteVersion3,
                                               (const void **)&sPSChannelPortsSuite))
                *gResult = errPlugInHostInsufficient;
            if (sSPBasic->AcquireSuite( kPSBufferSuite,
                                               kPSBufferSuiteVersion2,
                                               (const void **)&sPSBufferSuite64))
                *gResult = errPlugInHostInsufficient;
            if (sPSChannelPortsSuite == NULL || sPSBufferSuite64 == NULL)
                *result = errPlugInHostInsufficient;
                return;
            switch (selector)
                case filterSelectorParameters:
                    DoParameters();
                    break;
                case filterSelectorPrepare:
                    DoPrepare();
                    break;
                case filterSelectorStart:
                    DoStart();
                    break;
                case filterSelectorFinish:
                    DoFinish();
                    break;
    catch (...)
        if (NULL != result)
            *result = -1;
void DoParameters ()
void DoPrepare ()
void DoStart ()
    if (*gResult == noErr)
        if (doUi())
            DoEffect();
void DoFinish ()
#define defColBits 8
void DoEffect()
    // Start with the first target composite channel
    ReadChannelDesc *pChannel = gFilterRecord->documentInfo->targetCompositeChannels;
    // Calculation width and height our filter window
    int32 width = pChannel->bounds.right - pChannel->bounds.left;
    int32 height = pChannel->bounds.bottom - pChannel->bounds.top;
    fstream logFile ("/Volumes/Macintosh Media/GaussLogFile.txt", ios::out);
    logFile << endl << "top " << pChannel->bounds.top;
    logFile << endl << "bottom " << pChannel->bounds.bottom;
    logFile << endl << "left " << pChannel->bounds.left;
    logFile << endl << "right " << pChannel->bounds.right;
    logFile << endl << "depth " << pChannel->depth;
    logFile << endl << "vRes " << gFilterRecord->documentInfo->vResolution;
    logFile << endl << "hRes " << gFilterRecord->documentInfo->hResolution;
    // Get a buffer to hold each channel as we process. Note we can using standart malloc(size_t) or operator new(size_t)
    // functions, but Adobe recommend sPSBufferSuite64->New() for memory allocation
    char *pLayerData = sPSBufferSuite64->New(NULL, width*height*pChannel->depth/8);
    if (pLayerData == NULL)
        return;
    // we may have a multichannel document
    if (pChannel == NULL)
        pChannel = gFilterRecord->documentInfo->alphaChannels;
    // Loop through each of the channels
    while (pChannel != NULL && *gResult == noErr)
        ReadLayerData(pChannel, pLayerData);
        GaussianBlurEffect(pChannel, pLayerData);
        WriteLayerData(pChannel, pLayerData);
        // off to the next channel
        pChannel = pChannel->next;
    pChannel = gFilterRecord->documentInfo->targetTransparency;
    // Delete pLayerData
    sPSBufferSuite64->Dispose((char**)&pLayerData);
void GaussianBlurEffect(ReadChannelDesc* pChannel, char *data)
    // Make sure Photoshop supports the Gaussian Blur operation
    Boolean supported;
    if (sPSChannelPortsSuite->SupportsOperation(PSChannelPortGaussianBlurFilter,
                                                &supported))
        return;
    if (!supported)
        return;
    // Set up a local rect for the size of our port
    VRect writeRect = pChannel->bounds;
    PIChannelPort inPort, outPort;
    // Photoshop will make us a new port and manage the memory for us
    if (sPSChannelPortsSuite->New(&inPort,
                                  &writeRect,
                                  pChannel->depth,
                                  true))
        return;
    if (sPSChannelPortsSuite->New(&outPort,
                                  &writeRect,
                                  pChannel->depth,
                                  true))
        return;
    // Set up a PixelMemoryDesc to tell how our channel data is layed out
    PixelMemoryDesc destination;
    destination.data = data; //*pixel
    destination.depth = pChannel->depth;
    destination.rowBits = (pChannel->bounds.right - pChannel->bounds.left) * pChannel->depth;
    destination.colBits = defColBits;
    destination.bitOffset = 0 ;
    // Write the current effect we have into this port
    if (sPSChannelPortsSuite->WritePixelsToBaseLevel(inPort,
                                                     &writeRect,
                                                     &destination))
        return;
    // Set up the paramaters for the Gaussian Blur
    PSGaussianBlurParameters gbp;
    int inRadius = 1;
    Fixed what = inRadius << 16;
    gbp.radius = what;
    gbp.padding = -1;
    sPSChannelPortsSuite->ApplyOperation(PSChannelPortGaussianBlurFilter,
                                                             inPort,
                                                             outPort,
                                                             NULL,
                                                             (void*)&gbp,
                                                             &writeRect);
    if (sPSChannelPortsSuite->ReadPixelsFromLevel(outPort,
                                                  0,
                                                  &writeRect,
                                                  &destination))
        return;
    // Delete the temp port in use
    sPSChannelPortsSuite->Dispose(&inPort);
    sPSChannelPortsSuite->Dispose(&outPort);
void ReadLayerData(ReadChannelDesc *pChannel, char *pLayerData)
    // Make sure there is something for me to read from
    Boolean canRead;
    if (pChannel == NULL)
        canRead = false;
    else if (pChannel->port == NULL)
        canRead = false;
    else if (sPSChannelPortsSuite->CanRead(pChannel->port, &canRead))
        // this function should not error, tell the host accordingly
        *gResult = errPlugInHostInsufficient;
        return;
    // if everything is still ok we will continue
    if (!canRead || pLayerData == NULL)
        return;
    // some local variables to play with
    VRect readRect = pChannel->bounds;
    PixelMemoryDesc destination;
    // set up the PixelMemoryDesc
    destination.data = pLayerData;
    destination.depth = pChannel->depth;
    destination.rowBits = pChannel->depth * (readRect.right - readRect.left);
    destination.colBits = defColBits;
    destination.bitOffset = 0 ;
    // Read this data into our buffer, you could check the read_rect to see if
    // you got everything you desired
    if (sPSChannelPortsSuite->ReadPixelsFromLevel(
                                                  pChannel->port,
                                                  0,
                                                  &readRect,
                                                  &destination))
        *gResult = errPlugInHostInsufficient;
        return;
void WriteLayerData(ReadChannelDesc *pChannel, char *pLayerData)
    Boolean canWrite = true;
    if (pChannel == NULL || pLayerData == NULL)
        canWrite = false;
    else if (pChannel->writePort == NULL)
        canWrite = false;
    else if (sPSChannelPortsSuite->CanWrite(pChannel->writePort, &canWrite))
        *gResult = errPlugInHostInsufficient;
        return;
    if (!canWrite)
        return;
    VRect writeRect = pChannel->bounds;
    PixelMemoryDesc destination;
    destination.data = pLayerData;
    destination.depth = pChannel->depth;
    destination.rowBits = pChannel->depth * (writeRect.right - writeRect.left); //HSIZE * pChannel->depth * gXFactor*2;
    destination.colBits = defColBits;
    destination.bitOffset = 0 ;
    if (sPSChannelPortsSuite->WritePixelsToBaseLevel(
                                                     pChannel->writePort,
                                                     &writeRect,
                                                     &destination))
        *gResult = errPlugInHostInsufficient;
        return;

Have you reviewed your code vs the Dissolve example? It is enabled for other bit depths as well.

Release strategy: problems after changing the price

HI Experts,
I have the follwing problem.
I´ve setup the release strategy for Purchase reqs.
The strategy includes 3 approval levels.
release indicator with changeability 4 and a value of 0,1% for the first two approval levels.
I´m able to release it, but if I release the first two appoval levels and change the Preq the release strategy goes back to the first level. Fine.
But the problem is now that I´m able to release the first level but if I try to release the second one I get a error message.
I guess the problem is the changeability - but how can I solve this issue?
The system have the cancel all approvals if someone changes the price.
Any ideas?
Thanks
Alex

HI RJ,
the exact message is "Release prerequisite not fulfilled".
The system should act in the following way:
Approval levels:
1. Supervisor
2. Manager
3. General Manager
1 and 2 is approved.
Then the requisitioner changes the price.
Release will be changeled (Releases already effected will be cancelled).
OK that work, now the release process starts with level 1.
1. Approved --> OK
2- try to approve and get the message "Release prerequisite not fulfilled".
1 and 2 have the same release indicator with 4 and 0,1%.
Thanks
Alex

Problem after change item status procedure in sales orders.

Hello experts,
I have changed item status procedure for sales orders. But now all BDoc with queue name CSA_ORDER_xxxxx remain in state 'Written to qRFC Queue (intermediate state)' and needs to be reprocessed manually.
No problem reprocessing.
Have somebody any idea ?
Best regards
Juan Salom

Hi,
Is your inbound queue un-registered(type U)? Look at trx.
SMQR
and see if it is in un-registered. If yes, select the CSA_ORDER_*** queue and click on
Registration
button.
If this does not help, re-generate your Bdoc services (for Bdoc BUS_TRANS_MSG) using
SMOGGEN
or
using the generation workbench.
Then try the delta once again and observe for queue and Bdoc status in the
SMW01
Hope it helps! Reward if helpful.
Regards,
Sudipta

Login problem after change in Domain name of portal

I have installed portal 3.0 Beta on windows 2000. installation has gone fine and everything was working. after this i made change in domain name. for this i ran ssodatan.cmd script (source from metalink).
now i am not able to go by
"http://domain_name/pls/portal30/
it gives the error
"The request for content either timed out, or produced an error, after 0 seconds in the browser"
Still i am able to go by "http://domain_name/pls/portal30_sso/" further if i login as any user, then all user are coming with "login server home page" as initial page.
any idea?
null

Hi Suzette,
I have portal 3.0.6.3.3 Beta i.e apache listener. For this i have not found domain name in registry. i made the following changes in htppd.conf file.
ServerName 194.170.231.141
<VirtualHost 194.170.231.141>
DocumentRoot E:\ORAPOR\Apache\Apache\htdocs
ServerName www.ahi-carrier.co.ae
ServerAlias ahiweb 194.170.231.141
</VirtualHost>
This 194.170.231.141 is my Fixed Internet IP.
my webserver machine name, where the oracle portal is installed is ahiweb(192.168.0.247).
also i have firewall before the web server.
Is these settings are OK for Portal.
I am using apache listener for my developer forms and reports, and they are working fine with these setting on the internet.
can i get white paper for these settings.
Thanks
null

Real problem after changing a setting (please read!!!)

Hi all,
This is the situation:
A UBEE wifi modem from my cable provider.
On the Ubee i connected my Airport Extreme Base Station (AEBS) via UTP, and have set it to bridge mode.
On the AEBS I have an Airport Express connected (via UTP) to extend my WiFi coverage.
For the last few months this worked like a charm.
Today I changed the setting on my Express not to create a network (a default setting), but to extend the network from my AEBS (the AEBS was always creating a network).
And now, both my AEBS and Express can not be found anymore, resulting in no network and no internet.
I disconnected the Express, but still the AEBS can't be found.
I did a factory reset on the AEBS, but again, the AEBS can not be found.
The problem is that I cannot connect the AEBS directly to the internet because of the UBEE wifi modem wich has default settings (meaning I didn't change them), and the AEBS must be used in Bridge mode to function properly.
Please can someone please help me to get everything work again.
I have both version 6 and 5.6 of Airport Utility.

I fixed the problem myself by resetting both the AEBS and the AExpress to their factory defaults. Strangely though that the latest version of Airport Utility didn't recognize either one of them, but luckily the Airport Utility 5.6 did.
So I recongigured first the AEBS, and when that worked as I wanted it to, I configured the Express.
And everything is now up and running like a charm.

Firefox problems after changing OS

Similar Messages

Maybe you are looking for