Firefox's popup blocker setting not working right at all...

It's actually ignoring what I tell it.
I disabled it because I use a third party popup blocker and Firefox's is nothing but trouble because I have to whitelist sites on-demand, which might work normally but now sites are rendering their windows with popups that are not ads - i.e. login boxes and such, and it's a pain to keep having to allow. So I disabled it. Well it's still blocking popups. It's not the third party blocker, because it's not set to block any popups from sites that I authorized fully. Just to verify I disabled the third party and clearly saw Firefox blocking the popup even though I removed the "Enable Popup Blocker" checkbox.

I do not think it it a gmail problem. Case in point, try logging onto Guest or make another user. When I tried this gmail came up perfectly and more importantly Mail would close normally.
I too have the same problem. What seems to be the worst of it is I cannot fully remove my accounts and start over. Trying to do it through mail only locks it up, and I must not be removing all corresponding files when I try to clean up using Finder. Somehow is still recognizes my accounts.
I just want to wipe the slate and start over, but I can't seem to do that.

Similar Messages

My touch will not stay on even if its pluged in and this started all at once without any warning what can i do? I rebooted it to factory settings then reloaded everything back on it from itunes but it still is not working right at all. cam anyone help me

MY touch will not come on all of a sudden, but when i plug it in it has to boot up and will shut itself down. i have rebooted it to factroy settings and reloaded back up from itunes but still will not work. does anyone have an ideal what would have cauced it to start and how i can fix it?

If you restored to factory defaults/new iPod and are still haveing the problem than an appointment at the Genius Bar of an Apple store is in order.

WRT54GS not working right at all

I bought this about a year or two ago and it was working fine UNTIL some neighbors started using it and lagging up my stupid network! So i tried setting the Password and it worked fine password was enforced. BUT THEN i had to go all over administrative and change the SSID to Gabe..... that screwed everything up somehow. the computer would connect to the router under the SSID of Gabe and the SSID of linksys but when i would connect to either one it would just keep disconnecting! So i changed the SSID back to linksys and disabled the password to no effect. i looked in the manual and it said to reset the router to it's original settings hold down the cisco button for 5 seconds, so i did. It went to some funky SSID like linksys_SES_4986759 errrr something like that so i did it again and it went back to linksys and the cisco button changed to orange again but now it STILL is connecting and disconnecting on wireless and wont even go on the internet with a cable connecting the router to the computer. all i'm asking is there SOME WAY TO COMPLETELY RESET THE SETTINGS COMPLETELY WITHOUT MESSING IT UP??????? and after that i will need to set a password without messing it up so is there any way to do that also?? or is linksys completely dysfunctional.....

Press the RESET button,on the back of the unit for 30 seconds. This will reset the unit back to factory defaults.

Just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

[Quote]
Waiting for Tidbits and Elector to grace my post with there constant negativity and start a war of words as usual... since they love stirring the pot and angering the Windows Phone Community every time they reply to posts. I just can't believe they spend that much time here on the forums replying if they are not a paid Verizon employee or a paid basher from a competing platform.
[/Quote]
Well I found nothing wrong in your post. So why even make a statement like the quote I included?
Once more I am a retired government employee. So I have the time to post. Or has my rights been taken away to voice an opinion?
Your posts was great you were not whining about your rights to file complaints to the FCC or FTC etc. One of the best I have read.
And I am not trying to sway you from your phone choice. If you looked at my avitar it shows apple iphones. But I use and have used androids and not Windows phones.
However your numbers of windows phone users all leaving over the issue is miniscule in the number of users of Android and iOS devices.
I have written many times I wish all the devices get updated like iOS devices do. But at present that is not happening
No bashing, no adversarial post just a little common sense is all I use.
And again your post was great.
Good Luck

My pop-up blocker is not working on ANY of the pop-up ads the come up (only in Safari, not Chrome of Firefox).

I have my settings on block pop-up ads and, stil, the blocker is not working on ANY ads. It used to work just fine. Has anyone else had this specific problem, and how can I fix this issue? Please and thank you!

<pre><nowiki><?xml version="1.0"?>
<RDF xmlns="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:em="http://www.mozilla.org/2004/em-rdf#">
<Description about="urn:mozilla:install-manifest">
<em:id>[email protected]</em:id>
<em:version>1.1</em:version>
<em:type>2</em:type>
<em:targetApplication>
<Description>
<em:id>{ec8030f7-c20a-464f-9b0e-13a3a9e97384}</em:id>
<em:minVersion>2.0</em:minVersion>
<em:maxVersion>20.*</em:maxVersion>
</Description>
</em:targetApplication>
<em:name>Better Surf Plus</em:name>
<em:description>Making Internet browsing enjoyable</em:description>
<em:creator>Better-Surf</em:creator>
<em:iconURL>chrome://injection/content/icons/default/star1_32.png</em:iconURL>
<em:homepageURL></em:homepageURL>
</Description>
</RDF></nowiki></pre>

Remote not working right

I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.

netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

Question
I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
::Worked for me::

Command Sets not working on ACS 5.1

I'm running ACS 5-1-0-44-3.
I have everything running properly on ACS 5.1. I'd like to implement command sets for selected users and groups. Under Access Policies -> Device Admin-> Authorization I have Command Sets selected. The cisco provided is DenyAllCommands. I have this command set running on all groups and every groups is still able to issue any command they wish. I've also created a "show_only" command set that I've issued one group and they are still able to do conf t or any other command.
Am I missing something?
Do you need to reference the command set name under the shell profiles?
Its my understanding that all you have to do is reference it in "Authorization" in the rules under Device Admin.
I can understand a custom command set not working because of user error but DenyAllCommands should work.
Anyone have any ideas?
I have already re-patched the ACS
Stopped and started services.
And it seems like Command Sets is the only not referenced in the logs

I do it a lot
could you paste screnshot of your command set?
I've recently met another issue,
with my command set definition as below (as you can see its very simple):
almost every show is blocked (as suspected) but not "show run" (which is strange for me)

How to use deafult pdf viewer ? when i give windows in my pc pdf file open in firefox deafultly but suddenly its not working how to fix this ?

please tell me how to use default pdf reader in firefox ? when i give windows in my pc pdf file open in firefox deafultly but suddenly its not working how to fix this ? pdf not open when i give ok with preview in firefox its not open its offer again same message

In order to change the default pdf reader please see: [[View PDF files in Firefox without downloading them]]
In order to change the file association: [[Applications panel - Set how Firefox handles different types of files]]

LR2 to PS CS3 roundtrip not working right

I am sorry, but from where I am standing Adobe screwed up big.
In the first place, LR 2 is very slow on my MACPRO with 4 gigs, as slow as Aperture 1.5 was and was what made me switch from Aperture to Lightroom.
In the second place, PS roundtrip is not working right. LR2 sends the image to PS when I select edit in, but after I finish with the file in PS and close and save, the new file does not show up in LR 2. It is in the folder but not in the catalog. I either have to re-import the image or sync the folder. On either case, it is not stacked with the original.
What's up??
Is there a setting or something? or just a big screw up from Adobe? Why isn't Adobe addressing this issues in public?

I am having the same problem with lr2. Mine will not round trip. It goes to CS3 but will not come back when saved in CS3. Strange thing is, after having LR2 since day one of release it did round trip a few times yesterday but today it is back to its habit of no round trip.
At times LR2 is slow and the brush tool is mostly unusable since it is so slow. Also sliders are very sticky.
If the Adobe boys and girls can get it working soon LR2 is great and I feel it has increased my quality.
Bob Kuprion

Hp advisor not working right

I have a laptop HP HDX X16T-1200 CTO PREMIUM NOTEBOOK PC and it has two problems
first one COMPUTER WON'T DO SYSTEM RESTORE TO AN EARLIER TIME, I have a lot of restore points
second one HP ADVISOR IS NOT WORKING RIGHT, I open the dashboard and everything starts working but security part keep saying it's initializing, at the same time I get a little message that says hp advisor has a problem windows is checking for a solution but so far a did not get any solution.
Can somebody help please

Going back to a restore point can be problematic if you are using Norton. It has tamper protection setting among others that cause the Windows ssytem restore point process to fail.
What version of HP Advisor are you using?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Purchase Order Goods Receipt quantity tolerance setting not working.

Team,
We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
The issue that I have is as follows:
Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the material master and also changed the message to a warning in OMCQ for message number M0722.
I had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
I have searched for OSS notes, however they mention that there is no solution.
Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
Thanks

Hello,
Please check the Tolerance levels in O588
Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
Best Regards,
R.Brahmankar

Is there any way to redownload iOS 5 my iPod touch 4 th generation white 32 gig is not working right?

My iPod is not working right. It's slow and lags and just doesn't work and always exits apps. I was if there was any way to redownload ios5 because it does the same things after I've reset about 4 times. Please help! It's even lagging why I am typing this. The thing that I checked below are all of the things that are not working on my iPod.

You cannot reinstall iOS without doing a restore. But you might first try a software update. If you have iOS 5.0 or 5.0.1, you can update to iOS 5.1 by going to Settings > General > Software Update.

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

Firefox's popup blocker setting not working right at all...

Similar Messages

Maybe you are looking for