Firefox seems to mess around with URLs containing certain non-alphanumeric characters.
When I try to access the URL http://www.the-dma.org/consumers/ [followed by anything - or nothing], I get a screen that says "Firefox can't find the server at www.dmaconsumers.org." - but, as you can see, that isn't the URL I was asking for. If I leave off everything after "the-dma.org", it works.
[Incidentally, in this block of this form, when I highlight text and click on either the '''Bold''' or ''italic'' buttons, it is put in quotes instead.]
Yes, as far as I can tell.
Similar Messages
-
I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!
Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!
-
iphone contacts "not available" to car phonebook after messing around with Outlook.pst files, names and backups, on my ms XP 2003 laptop. I substituted a much smaller new Personal Folder -Contacts File, with a smaller list of phone numbers (4 only as a test) which successfully synced to the iPhone 4. The iPhone connects to the Skoda Octavia HandsFreeSystem OK (Bluetooth works fine), but now iPhone wont load the new Contacts as it did originally. However a family Nokia (never messed with) can connect properly. So must be the iPhone or more likely an Outlook.pst \ Contacts problem. Ideas?
After fiddling a little more, the following fixed my corrupted outlook.pst file:
1) I made a backup
2) In outlook under file, I exported the calendar to excel
3) In outlook under file, I imported the calendar back to outlook
And voila, it worked. -
I was messing around with my iPad and put in a in app purchese and forgot the pass code help!
I was messing around with my iPad and put in a in app purchese and forgot the pass code help!
Do you mean you forgot the passcode for your iPad? If so you need to restore it through the recovery mode described in http://support.apple.com/kb/HT1808
-
Ovi messes around with my .jar files
Hmm, been unable to find info about this elsewhere.
When i install the Ovi suite (2.0.1.36) it decides that it is the best default program for my java .jar files which i use on my computer, not my phone.
Everytime i try to pick the appropriate program for my jar files, it either has errors or doesent show any gui.
Is there anyway to use the phone tethering without the ovi software or is there a fix to this?Yes, this is completely ridiculous. Nokia PC Suite did the same, I expected newer software to stop messing around with something that is a de facto standard: .jar files are Java Archive files. OVI installation should NOT mess with the settings in registry for .jar files.
Run regedit, and look at the key HKEY_CLASSES_ROOT\.JAR (note the dot befor JAR)
This is where OVI has messed with things... You will see that the value OVI has set on that key is Nokia Ovi SuiteApplicationInstaller_JAR
If you have a key on your system that is HKEY_CLASSES_ROOT\jarfile Change the setting on
HKEY_CLASSES_ROOT\.JAR to jarfile.
H. -
Hi, I was messing around with iTunes
Hi,
I was messing around with Itunes and did something( Idon't know what) and managed to dramatically lose 3/4 of the albums I previously had.
Can amyone explain how to recover these lost albums?
Kind regards,
TimRestore them from the backup of your hard drive you made prior to "messing around with iTunes".
-
Account Codes with non Alphanumeric characters
I have a customer who has Business Partner Codes which contain non Alphanumeric characters :
space
full stop
apostrophe
forward slash
hyphen
Will this cause issues with the operation of any aspect of Webtools - what if anything should I watch out for since these cannot be changed?Thanks for your response. The form method is "post". The only thing that the CFM handler does with this field (gametestexperience) is include it at the bottom of an email message:
<CFMAIL TO="[email protected]"
FROM="#email#"
SUBJECT="Tester Application"
type="html"
server = "Cluster9.us.messagelabs.com">
Automatically logged from the internet form:<p><p>
<table>
<tr><td>EmailFrom</td><td>#email#</td>
<tr><td>From</td><td>#firstName# #lastName#</td></tr>
<tr><td>Sent</td><td>#DateFormat(Now())#</td></tr>
<tr><td>Referrer</td><td>#referer#</td></tr>
<tr><td>Confirmation</td><td>#agree1#, #agree2#, #agree3#, #agree4#, #agree5#</td></tr>
<tr><td>FamilyCompetitor</td><td>#familycompetitor#</td></tr>
<tr><td>FamilyWork</td><td>#familywork#</td></tr>
<tr><td>ReferredBy</td><td>#referredBy#</td></tr>
<tr><td>RefererDetails</td><td>#refererdetails#</td></tr>
<tr><td>FirstName</td><td>#firstName#</td></tr>
<tr><td>LastName</td><td>#lastName#</td></tr>
<tr><td>Email</td><td>#email#</td></tr>
<tr><td>TelephoneHome</td><td>#telephoneHome#</td></tr>
<tr><td>TelephoneCell</td><td>#telephoneCell#</td></tr>
<tr><td>TelephoneDay</td><td>#telephoneDay#</td></tr>
<tr><td>City</td><td>#homeTown#</td></tr>
<tr><td>Employment</td><td>#employment#</td></tr>
<tr><td>GamerType</td><td>#gamerType#</td></tr>
<tr><td>GamerStyle</td><td>#gamerStyle#</td></tr>
<tr><td>HoursPerWeek</td><td>#hoursPerWeek#</td></tr>
<tr><td>PreferredGenres</td><td>#preferredGenres#</td></tr>
<tr><td>Consoles</td><td>#console#</td></tr>
<tr><td>GamesPlayed</td><td>#gameplayed#</td></tr>
<tr><td>Available</td><td>#available#</td></tr>
<tr><td>TestedBefore</td><td>#testedBefore#</td></tr>
<tr><td>TestingExperience</td><td>#gametestexperience#</td></tr>
</table>
Thanks,<P>
Focus Test Team!<P>
</CFMAIL> -
I was meeting around with lock my iPhone and I was prancing my friends when i locked my phone now it's locked and the screen is now pitch black it can receive calls nut I can't see a thing
There is nothing that you can do to get rid of the balance on your own. Contact iTunes Store Support and seek their assistance. I believe that they can reset your balance for you.
https://expresslane.apple.com/Issues.action -
Ive wipped everything off my Fathers MacBook Pro's drive, there's no recovery partition left nothing the model is a MacBook Pro 5,4 Intel Core2Duo 2.5Ghz
and I don't no were to start to install another operating system Im told this system can't be rebooted only can be booted from the recovery partition,Im really stuck here with this Mac and all it does is show me a Folder with a Question Mark on the screen any help would be appreciated Oh please anything.....I combed threw past post's but Im not to savy on getting around in these forums since this is the first Ive posted to even if there's a link to the way Im going to have to get this reinstalled that would be great I don't know heck Ill download a torrent file of what I need to get started on this any thing you good people tell me I should do,to get this up and running Ill do,please.
Thanks myklthebrainOh, the irony of referring to yourself as "myklthebrain". Make an appointment, at the nearest Apple store, with an Apple Genius, and hope that (s)he can sort it out.
-
Object scaling does not seem to work correctly with objects containing Bezier curves
I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
Thanks for any suggestions or ideas.
-Bubba
ps - i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)Bubba,
Referring to post #16 (trying to get it more right from the start than in post #15),
the scaling will be symmetric with parallel segments if the original object is rotationally symmetric and reflectionally symmetric about two orthogonal axes, and that is also the case.
The scaling of the object in post #16 is in fact symmetric because corresponding segments of original and scaled object have the same distance all the way round.
The five star in the OP is rotationally symmetric but only reflectionally symmetric about one axis, so the segments are parallel, but the scaling is not symmetric because there different distances between corresponding segments, even though you were actually satisfied with it:
The first star shows the effect I'm trying to get and the second shows the problem
This could be mended by scaling from the centroid.
If you need to have the same distance between all the segments of original and scaled object, with scaling you are restricted to objects where all segments start and end at the same distance from the centroid, as in regular polygons (including the square), regular stars, and the circle (with its curved segments). Objects with curved segments derived from regular polygons and stars will have varying distances and non parallellism within each segment. -
ITunes is messing around with my files
I just bought my first iTunes music, a double disc. I wanted iTunes to list the two discs as separate albums, so that it wouldn't mess up the track listing, so I went to the file properties and added disc 1 or disc 2 to the album name. I also changed the file name to start with, for example, 01 instead of 1-01 for the first track of the first album, and I put the tracks in two different folders.
Now when I open these files with iTunes, the file names are automatically changed back to what they were when I bought them, and they're moved to a folder called "<album name> dis" (the album name in the properties - minus the "c 1" or "c 2"). None of the properties are changed, however.
How can I make it stop do this?Don't change filenames. iTunes will name the file based on the track name.
How can I make it stop do this?
Edit what you need to in iTunes. -
I messed around with tab groups and somehow closed it all. Now all my tabs are gone!
I clicked on the "tab groups" button and not knowing what it was or what it does, I seemed to have closed all my tabs (30+). Now they are all gone, except for 10 which i saved from 'recently closed tabs'. Can anyone help! I had important tabs open and do not remember the links or how to get them again!
(for future usage) You can specify the number of Tabs and Windows you can undo in a session. Here's how:-
Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionstore.max_tabs_undo'''
* right-click the preference '''browser.sessionstore.max_tabs_undo''' -> click '''Modify''' -> type the number -> click OK
-> In the '''Filter bar''', type '''browser.sessionstore.max_windows_undo'''
* right-click the preference '''browser.sessionstore.max_windows_undo''' -> click '''Modify''' -> type the number -> click OK
-> Close the '''about:config''' tab and Restart Firefox.
Check and tell if its working. -
How can I fool around with url names and webapps?
I want to set up a hosted service where when someone buys, they get a url like so they can go to .....
http://xsoftware.biz/<companyName>
When they go to this url, I want the servlet container to be using one app(a default app), and when they go to this url.....
http://xsoftware.biz/<companyName>/<appName>
they go to appName1. Now for the twist.....I would want these two urls to use the same app....(they would hook to different db based on company name)
http://xsoftware.biz/company1/app1
http://xsoftware.biz/company2/app1
Is anything like this even possible? I am thinking some sort of servlet filter sits before every app. That filter willl modify the url to http://xsoftware.biz/app1 and set a property in the request to the companyName for later use by the application. For redirects within the app(JSF), I think I can redirect to something like http://xsoftware.biz/company1/app1/redirectee.jsf and the filter will be applied again. Does this solution work? thoughts? Is there a better solution for this?
thanks,
deanSame issue here! Unsolved after YEARS of this issue.
I dig through the downloads folder and paste a copied file name at least 15 times a day.
And Mountain Lion was supposed to be a big push for Chinese language users. Still a fail.
Really want to be a Safari supporter - would love to see this solved, Apple. -
Safari and Firefox seem to have issues with Flash?
Hi - in the past few days every time I try to view a website with video, both Safari and Firefox hang with the beachball and I have to force-quit. I tested to see if it was just taking a long time to load, and it was still the same after an hour. I've read on this forum that Snow Leopard and Flash have some issues, and I've done everything suggested: un-installed Flash then re-installed the latest version, cleared out Safari cache and reset Safari, repaired disk permissions...I am at a loss. Any ideas are appreciated!
Hi,
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem.
http://support.apple.com/kb/TS1594
Make sure Safari is running in 32-bit mode. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
If Safari still crashes, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
Carolyn -
Hi, I am new to Applescript and after messing around with it have a few questions.
Firstly, I love applescript so far and have made an alarm clock, simple get weather app and applescript app that announces the time and date. i would like to be able to use this as a jarvis like combined app where i can have all of these built into one applescript. secondly i would like a better version of my weather app to be included that can give me weather based on my location (not the location i have it set too). lastly it would also be a miracle if someone could give me a way to make a simple chat like bot that can talk back because i have tried setting up eliza (chat bot from apple) but because it uses ichat things are much more difficult for me as a novice to set up properly. for instance type hi in a display dialog box and have the text returned open up in messages and be able to communicate with my chat bot that would have predefined responses for what i type. like if i type weather it would know to tell me the weather. anyway ill have my codes listed below and if anyone can help with any part of this that would be fantastic and greatly appreciated. also just a note i will never sell this thing if someone helps me by giving me coding to get this idea working. i just want it because i could greatly use having a virtual assistant and to use personally. thanks in advance for all people who do help.
--codes for getting date
set {year:y, month:m, day:d} to (current date)
y --> 2006
m --> April
d --> 15
-- note that the month given above is not text unless coerced to text. "April" is a word in the AppleScript lexicon.
-- these results can also be obtained directly, one at a time:
month of (current date) --> April
-- or as a list:
{year, month, day} of (current date) --> {2006, April, 15}
-- and finally, the day of the week can be extracted:
weekday of date "Saturday, April 15, 2006 4:29:04 PM" --> Saturday
say date string of (current date)
--codes for getting time
set currentDate to current date
set amPM to "AM"
set currentHour to (currentDate's hours)
set currentMinutes to currentDate's minutes
if (currentHour ≥ 12 and currentHour < 24) then
set amPM to "PM"
else
set amPM to "AM"
end if
-- make minutes below 10 sound nice
if currentMinutes < 10 then
set currentMinutes to ("0" & currentMinutes) as text
end if
-- ensure 0:nn gets set to 12:nn AM
if currentHour is equal to 0 then
set currentHour to 12
end if
-- readjust for 12 hour time
if (currentHour > 12) then
set currentHour to (currentHour - 12)
end if
set currentTime to (currentHour as text) & ":" & ((currentMinutes) as text) & " " & amPM as text
say currentTime
--alarm with weather
-- prompt the user for the desired wake up time
set targetTime to the text returned of (display dialog "Enter the wake-up time:" default answer "7:00 AM")
say "Goodnight sir…"
-- wait until we reach the target date/time
repeat while (current date) is less than date targetTime
-- should be 60
delay 2
end repeat
say "It is " & getTimeInHoursAndMinutes()
on getTimeInHoursAndMinutes()
-- Get the "hour"
set timeStr to time string of (current date)
set Pos to offset of ":" in timeStr
set theHour to characters 1 thru (Pos - 1) of timeStr as string
set timeStr to characters (Pos + 1) through end of timeStr as string
-- Get the "minute"
set Pos to offset of ":" in timeStr
set theMin to characters 1 thru (Pos - 1) of timeStr as string
set timeStr to characters (Pos + 1) through end of timeStr as string
--Get "AM or PM"
set Pos to offset of " " in timeStr
set theSfx to characters (Pos + 1) through end of timeStr as string
set theHours to hours of the (current date)
if theHours > 18 then
say "good Evening"
else if theHours > 12 then
say "good Afternoon"
else if theHours > 6 then
say "good Morning"
else if theHours > 0 then
say "good Morning"
end if
return (theHour & ":" & theMin & " " & theSfx) as string
end getTimeInHoursAndMinutes
tell application "Mail" to launch
tell application "Calendar" to launch
tell application "iTunes" to launch
set CityCode to 2353736
set t_format to "F"
set v_format to "S"
set a_format to "Y"
set IURL to "http://weather.yahooapis.com/forecastrss?w=" & CityCode
set file_content to (do shell script "curl " & IURL)
--looking for the line with actual condition
set theText to text ((offset of "yweather:condition" in file_content) + 1) thru -1 of file_content
set sub_1 to text ((offset of "\"" in theText) + 1) thru -1 of theText
set actual_condition to text 1 thru ((offset of "\"" in sub_1) - 1) of sub_1
set sub_1a to text ((offset of "temp=" in sub_1)) thru -1 of sub_1
set sub_1b to text ((offset of "\"" in sub_1a) + 1) thru -1 of sub_1a
set actual_temp to text 1 thru ((offset of "\"" in sub_1b) - 1) of sub_1b
if t_format is equal to "C" then
set actual_temp to (5 / 9) * (actual_temp - 32) as integer
end if
set theText to text ((offset of "yweather:forecast" in file_content) + 1) thru -1 of file_content
set sub_2 to text ((offset of "\"" in theText) + 1) thru -1 of theText
set today_min_temp to word 9 of sub_2
set today_max_temp to word 12 of sub_2
if t_format is equal to "C" then
set today_min_temp to (5 / 9) * (today_min_temp - 32) as integer
set today_max_temp to (5 / 9) * (today_max_temp - 32) as integer
end if
set sub_3 to text ((offset of "text" in sub_2) + 1) thru -1 of sub_2
set sub_4 to text ((offset of "\"" in sub_3) + 1) thru -1 of sub_3
set today_forecast to text 1 thru ((offset of "\"" in sub_4) - 1) of sub_4
set sub_5 to text ((offset of "yweather:forecast" in sub_4) + 1) thru -1 of sub_4
set sub_6 to text ((offset of "\"" in sub_5) + 1) thru -1 of sub_5
set tomorrow_min_temp to word 9 of sub_6
set tomorrow_max_temp to word 12 of sub_6
if t_format is equal to "C" then
set tomorrow_min_temp to (5 / 9) * (tomorrow_min_temp - 32) as integer
set tomorrow_max_temp to (5 / 9) * (tomorrow_max_temp - 32) as integer
end if
set sub_7 to text ((offset of "text" in sub_6) + 1) thru -1 of sub_6
set sub_8 to text ((offset of "\"" in sub_7) + 1) thru -1 of sub_7
set tomorrow_forecast to text 1 thru ((offset of "\"" in sub_8) - 1) of sub_8
if a_format is equal to "Y" then
say "The current weather in Alpine is " & actual_temp & " degrees and " & actual_condition
end if
delay 4
tell application "Mail"
set unreadMessages to (get every message of mailbox "INBOX" of account "jarvisMail" whose read status is false)
set numberofmessages to (count of (every message of mailbox "INBOX" of account "jarvisMail" whose read status is false))
if (count of (every message of mailbox "INBOX" of account "jarvisMail" whose read status is false)) is 1 then
tell application "Mail"
say "There is only " & numberofmessages & " new email"
repeat with eachMessage in unreadMessages
say "From! "
say (get sender of eachMessage)
say "Subject."
say (get subject of eachMessage)
set read status of eachMessage to true
end repeat
end tell
else if (count of (every message of mailbox "INBOX" of account "jarvisMail" whose read status is false)) is greater than 1 then
tell application "Mail"
say "There are " & numberofmessages & " new messages"
repeat with eachMessage in unreadMessages
say "From! "
say (get sender of eachMessage)
say "Subject."
say (get subject of eachMessage)
set read status of eachMessage to true
end repeat
end tell
else
say "You have no new messages"
end if
tell application "Mail" to quit
end tell
delay 4
set today to (current date)
set today's time to 0
set tomorrow to today + days
set myHome to {}
tell application "Calendar"
set futureEvents to every event of calendar "Home" whose start date is greater than or equal to today and end date is less than or equal to tomorrow
tell application "Calendar" to quit
end tell
repeat with anEvent in futureEvents
tell application "Calendar" to set {summary:theSummary, start date:theStartDate, allday event:allDayEvent} to anEvent
if (allDayEvent) then
set theTime to "At some time today"
else
set {hours:Eventhour, minutes:Eventminute} to theStartDate
if (Eventhour > 12) then
set Eventhour to Eventhour - 12
set pre to "PM"
else
set pre to "AM"
end if
if (Eventminute is 0) then set Eventminute to ""
set theTime to "At " & Eventhour & " " & Eventminute & " " & pre
end if
set the end of myHome to theTime & " you have the event… " & theSummary
end repeat
set numberOfHome to (count myHome)
if (numberOfHome is less than 1) then
say "you have no events today."
else if (numberOfHome is equal to 1) then
say "you have one event today"
delay 1
say item 1 of myHome
else
say "you have" & numberOfHome & " Home today"
delay 1
repeat with thismeeting in myHome
say thismeeting
delay 0.5
end repeat
end if
delay 4
tell application "iTunes"
play playlist "Jarvis Alarm"
delay 900
tell application "iTunes" to quit
end tell
--weather
set weather to "curl " & quote & "http://weather.yahooapis.com/forecastrss?p=USNY0996&u=f" & quote
set postWeather to "grep -E '(Current Conditions:|F<BR)'"
set forecast to do shell script weather & " | " & postWeather
say (characters 1 through -7 of paragraph 2 of forecast) as string4piper wrote:
I have a HP Envy 15 Notebook PC "without" a cd/dvd drive. I bought one that plugs in which is a pain, but I am findind myself having to install updates that lasts for hours. Please, can someone help me??? I am almost ready to go back to Dell because I have had to many issues! I have spent more time on the upgrades/updates than I have actual enjoyment on this PC. And it is 13 days old.
And getting a PC that does not have a cd player is completely, well I am not going to say it. How was I going to download the printer? Or any other software?
Can someone please tell me if there is a one button upgrade/update that will get this done and over with?
Thank you.
Piper
Hi,
Could you tell us what Envy 15 it is, please? I mean the full model name. The new laptops don't have any DVD drives because all drivers etc can be downloaded from the internet and all bootable images don't have to be burned to DVDs but simple converted to usb drives. Tell us also what printer you have got so we can find the right drivers for you.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*
Maybe you are looking for
-
Getting ORA-06502 in Runtime, but not throug Developer
I got a copy of Matrix.fmb & Matrix.pll from someone at oracle and changed it up for my application. It worked great. I just recently upgraded from 8.05 to 10G and Developer 5 to 6. If I run the form from Developer, it runs great. If I run in using t
-
How to delete the previous request in Cube ?
Hi All I have 2 sources loaded to Cube.. Ex: ODS A --> Cube 1 ODS B --> Cube 1 Today they 31.10.2011 for both in CUBE1 so it becomes... ODS A --> Cube 1 --> 31.10.2011 ODS B --> Cube 1 --> 31.10.2011 tomorrow they load... CUBE 1 shld be.. ODS A --
-
No image previews in Konqueror
I suddenly got this strange problem in Konqueror. When I'm browsing a folder with images I get no thumbnail previews any more. I've made sure previews are enabled (the little button on the toolbar) and the filesize for preview is large enough. Very s
-
Downloaded tv show from itunes and it won't play on my mac, just a black screen
downloaded tv show from itunes and it won't play on my mac, just a black screen
-
Setting canvas property of item during runtime
Can anybody tell me how to set the canvas property of item in the block at runtime if the canvas property is set to null during runtime. Pls forward the answer. Thanks.