Firefox shows running cant display

Firefox 6.0, just updated two days ago.
I can see Firefox running in Task Manager but it just cant display.
tried
# -End Process and
# -Reboot
# Reinstall
does not work.
already tried many times. sometimes after about 15minutes, use alt tab can see firefox, but it cant browse any websites while no problem with IE and Chrome
The connection has timed out
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

I opened CCleaner; after clearing the Firefox session, the program returned to normal.
Notes: I did a cold boot (shut down and restart) to no avail. I tried right-clicking, etc. to no avail.
On CCleaner (a free utility download from FileHippo or similar site), I only checked the boxes for cache and session, to see what would happen. The cache had 0 bytes, presumably because I'd done a cold boot. So, you really just need to close Firefox, clear the session using CCleaner and restart Firefox.
>> When searching for a solution I asked this question another way. This is the same reply I entered there ("Firefox remains minimized on taskbar and won't open or maximize.") A reply already posted there suggested opening Firefox in safe mode.

Similar Messages

How do I get Firefox to run and display applets without asking for my permission for each one?

Each time I load a web page with a new applet I get asked whether I want to run it. I don't want this. I just want the applets to be run. I read in the help section about using the java console but I can't find how to display the java console either.

hello, lower the security level within the java settings in the system control panel: http://www.java.com/en/download/help/jcp_security.xml

When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

Hi NicoMan,
According to your description ,we seem to suffer a performance issue here.
Have you tried to open the task manager to check the system performance ? Is there any specific process occupied many system resources ?Will the issue occur only with the specific applications ?
We can try to restart the Windows Explorer process to have a check.
If it only occurred with the spefcific two applications ,we can try to end the other application processes manually from the task manager to have a check .
If this is caused by the specific application ,we may need to look for help from the third party support considering they are all the third party applications .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

After stopping FF when I restart it , I get a pop up displaying Firefox already running but not responding. Please Help?

After stopping FF when I restart it , I get a pop up displaying Firefox already running but not responding. Please Help?

There are several possible causes, see [[Firefox is already running but is not responding]].

Firefox will not start on limited account. Reports firefox already running but doesn't show in task manager. Adminstrator account work fine

Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox

Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Why my firefox cant open and when i checking my ccleaner said the mozilla firefox still running . please give me advice

please advice me please :(

Check your firefox running in background
*https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding
*http://kb.mozillazine.org/Firefox.exe_always_open

Cant open firefox as pop up says 'firefox is running in another location and not responding i removed firfox and re-installed same result help

I have been using firefox for years, and never have had any trouble !!..approx 2 months ago while using facebook..my laptop screen 'freezes'..so iwas forced to Ctrl+Alt+Delete..next day when i tried to open firefox..this pop up stated that 'firefox was running in different location and not responding'..I then downloaded 'windows explorer' and a few days later..i un-installed firefox..and re-installed firefox..only to find that the problem still persisted to this day..I then used 'trojan hunter' 'windows emergency' and 'windows defender'..all saying..your system is running at 100% 'Internet explorer' now has pop up blocker when i enter facebook."Internet explorer cannot open this page"..I am now forced to use my Google Mail threads to facebook..to log in to facebook!! help help..i want my Firefox Back !!

There are various causes for this error, see [[Firefox is already running but is not responding]] for details.

Unable to open a new window you must first close exsisting firefox process or restart your system. There is no firefox process running why should I receive this error msg?

I closed a Firefox process. Then clicked the FF icon to restart my browser. I received an error message. " Firefox is already running, but not responding. To open a new window you must first close existing Firefox process, or restart your system. However there is no Firefox process running to begin with. I checked the task manager.
== This happened ==
Every time Firefox opened

It takes Firefox 5-15 seconds to completely close and for the OS to release the processes; it may take longer if you have a Flash animation/video running in one of the tabs. If not waiting long enough is not the problem, you can try the following to determine if an Extension or Plugin might be causing Firefox to hang at exit.
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version. Any ideas??

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version & no change. Any ideas??

ME TOO.
I think mine are all still in alphabetical order, but :
* movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
* for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
* Items are showing up multiple times.
* A few MUSIC ALBUMS are listed in my Movies section.
* Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
* Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying.

Firefox is running, but window is not visible

I am running a recent version (updated 9/11/2012 ... but I can't get to it to see the version number) of Firefox on Windows 7. Firefox is running, I can close it using the Windows task bar or Task Manager, and when I reopen it, I briefly (< 1 sec) see a full-screen window, then it goes away. I can hover over the taskbar icon and see a thumbnail of the page it has open, but can't get it to show the full window.
I've tried using Task Manager's Switch To and Bring to Front features to no avail. I rebooted the computer and still get the same behavior.
Any ideas?

Hi,
You can try deleting the '''localstore.rdf''' and '''sessionstore.js''' files in the [http://kb.mozillazine.org/Profile_folder Firefox Profile Folder]. Before that, you can also try to '''Shift''' + '''Right-click''' the '''Taskbar''' icon > '''Move''', move the mouse once without clicking, and then use the arrow keys on the keyboard. You may have to experiment with the four arrow keys. Hopefully the window will appear.
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

How to "Show notifications when display is off"

Hi,
In Mavericks Beta the notifications from Mail, Messages, Facebook etc. were displayed even when the screen was turned off. It lit up the screen for a while showed the notification for few seconds and then the screen was turned off again. I really liked that feature cause I could see whats happening on my iMac even if I wasn't using it.
In this Apple document this feature is still described http://support.apple.com/kb/PH14360?viewlocale=en_US&locale=en_US
Show notifications when display is off or locked
Get alerts when your display is off or your Mac is locked.
But the option to enable it is no longer in the Notifications settings, instead there is "Show notifications on lock screen".
So please let me ask, is there some possibility to show notifications on turned off display? Maybe by editing some preference file or something like that?
Thank you very much for answers.
Best Regards
Milan

I too would like to know a way around this problem. In the prior version of iCal, you could enable alarms only when iCal was running. I routinely sync three computers, sometimes hours to days apart. So unless I remember to turn alarms off prior to shutting down the machines, the alarms are not properly updated upon syncing when an idle machine is turned back on.
Hope this makes sense. Either way, it would have been better if Apple had not gotten rid of this feature in the new iCal.
Eddie

Router Crashes after entering "show run" or similar commands

Hello,
Im having a problem with my Company router C3845-ADVSECURITYK9-M, software Version 15.1(4)M. After i issue "show run" it tends to crash in middle of output, router restarts itself to be precise....same thing happened when i tried "show stack" afterwards, it happened several times when trying to show running config, so im guessing it has some problem when trying to display large outputs...i have never heard of such thing though so im asking for advice,
These are some informations i gathered:
show version:....
System returned to ROM by error - a Software forced crash, PC 0x60AD4710 at 14:10:56 CET-SUM Wed Aug 13 2014
xxxx#sh env
SYS PS1 is present.
Fan status: Normal
Input Voltage status: Normal
DC Output Voltage status: Normal
Type: AC
Thermal status: Normal
SYS PS2 is absent.
AUX(-48V) PS1 is absent.
AUX(-48V) PS2 is absent.
Fan 1 OK
Fan 2 OK
Fan 3 OK
Fan Speed Setting: Normal
Alert settings:
Intake temperature warning: Enabled, Threshold: 55
Core temperature warning: Enabled, Threshold: 70 (CPU: 90)
Board Temperature: Normal
Internal-ambient temperature = 38, Normal
CPU temperature = 50, Normal
Intake temperature = 32, Normal
Backplane temperature = 29, Normal
Voltage 1(3300) is Normal, Current voltage = 3284 mV
Voltage 2(5150) is Normal, Current voltage = 5153 mV
Voltage 3(2500) is Normal, Current voltage = 2525 mV
Voltage 4(1200) is Normal, Current voltage = 1203 mV
xxxx#sh logg
Syslog logging: enabled (0 messages dropped, 120 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 62 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 178 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level informational, 181 message lines logged
Logging to 10.254.0.49 (udp port 514, audit disabled,
link up),
181 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Logging to 10.254.8.44 (udp port 514, audit disabled,
link up),
181 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Log Buffer (1000000 bytes):
*Aug 13 12:33:24.867: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Aug 13 12:33:24.871: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Aug 13 12:33:25.635: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Aug 13 12:33:25.635: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Aug 13 12:33:25.927: %LINEPROTO-5-UPDOWN: Line protocol on Interface Onboard VPN, changed state to up
*Aug 13 12:33:26.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Aug 13 12:33:26.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Aug 13 12:33:27.787: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Aug 13 12:33:27.787: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Aug 13 13:33:29.023: %SYS-6-CLOCKUPDATE: System clock has been updated from 12:33:29 UTC Wed Aug 13 2014 to 13:33:29 MET Wed Aug 13 2014, configured from console by console.
*Aug 13 14:33:29.023: %SYS-6-CLOCKUPDATE: System clock has been updated from 13:33:29 MET Wed Aug 13 2014 to 14:33:29 CET-SUM Wed Aug 13 2014, configured from console by console.
*Aug 13 14:33:30.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:0, changed state to down
*Aug 13 14:33:30.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:1, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:2, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:3, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:4, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:5, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:6, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:7, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:8, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:9, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:10, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:11, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:12, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:13, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:14, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:16, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:17, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:18, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:19, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:20, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:21, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:22, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:23, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:24, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:25, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:26, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:27, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:28, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:29, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:30, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:15, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:0, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:1, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:2, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:3, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:4, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:5, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:6, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:7, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:8, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:9, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:10, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:11, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:12, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:13, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:14, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:16, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:17, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:18, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:19, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:20, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:21, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:22, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:23, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:24, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:25, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:26, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:27, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:28, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:29, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:30, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:15, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:0, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:1, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:2, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:3, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:4, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:5, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:6, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:7, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:8, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:9, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:10, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:11, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:12, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:13, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:14, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:16, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:17, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:18, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:19, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:20, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:21, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:22, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:23, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:24, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:25, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:26, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:27, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:28, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:29, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:30, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:15, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:1, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:2, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:3, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:4, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:5, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:6, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:7, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:8, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:9, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:10, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:11, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:12, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:13, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:14, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:16, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:17, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:18, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:19, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:20, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:21, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:22, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:23, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:24, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:25, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:26, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:27, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:28, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:29, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:30, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:15, changed state to down
*Aug 13 14:33:30.731: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Aug 13 14:33:31.535: %LINK-3-UPDOWN: Interface Serial0/1/0:1, changed state to down
*Aug 13 14:33:31.795: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Aug 13 14:33:31.999: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Aug 13 14:33:32.599: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0:1, changed state to down
*Aug 13 14:33:32.799: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Aug 13 14:33:32.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Aug 13 14:33:34.811: %QOS_CLI_DEPRECATE-4-MAX_RESERVED_BW: max-reserved-bandwidth on interface has been deprecated. For further information, please consult Product Bulletin 580832, Legacy QoS CLI Commands Deprecation
*Aug 13 14:33:34.815: Interface Serial0/1/0:1 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Aug 13 14:33:35.795: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Aug 13 14:33:35.795: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Aug 13 14:33:36.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Aug 13 14:33:36.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Aug 13 14:33:36.811: %LINK-5-CHANGED: Interface Serial0/1/0:1, changed state to administratively down
*Aug 13 14:33:37.419: %LINK-5-CHANGED: Interface Dialer1, changed state to administratively down
*Aug 13 14:33:38.055: %SYS-5-CONFIG_I: Configured from memory by console
*Aug 13 14:33:38.491: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 3800 Software (C3845-ADVSECURITYK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 17:29 by prod_rel_team
*Aug 13 14:33:38.495: %SNMP-5-COLDSTART: SNMP agent on host xxxx is undergoing a cold start
*Aug 13 14:33:38.519: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Aug 13 14:33:38.699: %SYS-6-BOOTTIME: Time taken to reboot after reload = 158 seconds
*Aug 13 14:33:38.859: %CONTROLLER-5-UPDOWN: Controller E1 0/0/0, changed state to up
*Aug 13 14:33:38.867: %CONTROLLER-5-UPDOWN: Controller E1 0/0/1, changed state to up
*Aug 13 14:33:38.875: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.875: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is ON
*Aug 13 14:33:38.896: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to up
*Aug 13 14:33:39.140: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.254.0.49 port 514 started - CLI initiated
*Aug 13 14:33:39.140: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.254.8.44 port 514 started - CLI initiated
*Aug 13 14:33:40.860: %LINK-3-UPDOWN: Interface Serial0/0/0:15, changed state to up
*Aug 13 14:33:40.868: %LINK-3-UPDOWN: Interface Serial0/0/1:15, changed state to up
*Aug 13 14:33:40.884: %LINK-3-UPDOWN: Interface Serial1/0:15, changed state to up
*Aug 13 14:33:41.684: %CSM-5-PRI: add PRI at 0/0/1:15 (index 0)
*Aug 13 14:33:41.688: %CSM-5-PRI: add PRI at 0/0/0:15 (index 1)
*Aug 13 14:33:51.648: %CSM-5-PRI: add PRI at 1/0:15 (index 2)
*Aug 13 14:34:14.956: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 0 state Standby -> Active
*Aug 13 14:34:15.164: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 2 state Standby -> Active
*Aug 13 14:34:15.484: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 3 state Standby -> Active
*Aug 13 14:34:21.600: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.85.212 on GigabitEthernet0/1.86 from LOADING to FULL, Loading Done
*Aug 13 14:34:27.728: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 4 state Standby -> Active
*Aug 13 14:20:02.780: %SYS-5-PRIV_AUTH_FAIL: Authentication to privilege level 15 failed by xxxx on vty0 (xxxx)
*Aug 13 14:21:50.405: %SYS-5-CONFIG_I: Configured from console by av-vilenko on vty0 (xxxx)

i made some changes, but nothing that would or could cause this. And besides according to my collegues its not a recent problem (before i joined the company), it goes back at least a year or more...but ofc. since router is working fine untill you try to show the config noone bothered to resolve the issue they just kept their hands off it -.-

Firefox process running, but no window?

Firefox crashed while I was away from my
computer (Windows XP, FF 7.0.1). Re-starting
caused the firefox.exe process to appear in the
task manager, along with 7 plugin-container.exe
processes, but no Firefox window appeared.
Re-booting and re-starting FF gave the same
result. Then, after several minutes, while
reporting this bug via IE, suddenly the FF
window appeared, and restored the tabs that had
been up when it crashed.

'''Open a second window (not a second tab, that is different) when Firefox is already running and displayed on the monitor'''
*Firefox button > New Tab > New Window
*CTRL+N
*'''''If using the Menu Bar''''': File > New Window
**To '''''temporarily''''' display and make choices from the Menu Bar press the ALT key or the F10 key
**Also see: https://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing
'''Firefox "hang on exit"'''
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

I have to re-install adobe flash for firefox every time i start my computer even if firefox shows that my adobe flash is working it does not.I also get notices from the websites i visit (get flash e.t.c.)

i have the latest firefox 10.02 in win7 and even if firefox shows is installed my adobe flash is not working so i have to run the flash installer every time i start my pc.After this everything works fine until the next start when i have to run the flashinstaller again

There are two versions of the Flash Player plugin. One is ActiveX and only works in IE. It sounds like you have that one installed. The other one works in all other browsers.
What seems to be happening is that you have security software that's blocking one of those versions of Flash/restoring your computer state and so it gets uninstalled when you start your computer. The other possibility is that there are permission issues. Unfortunately, this isn't something that Firefox can control; it's a problem with the Flash installation (Firefox is dumb and just looks in the registry for a list of installed plugins to load).
Make sure that you're an admin on your computer when you try to install Flash and that you check your security settings. If that doesn't work, try posting to the [http://forums.adobe.com/community/flashplayer Adobe community forums] to see if other people have had similar issues and know how to address them.

Firefox shows running cant display

Similar Messages

Maybe you are looking for