Firefox sleeps and wakes up in offline mode.

Unfortunately, I can't tell you anything different that I've done that has led to this problem. Same sites, same habits.
At any rate, I always leave FF running. I'm using Windows Vista, and all I do is close the lid on my laptop, it shuts everything down into Sleep Mode. I come back to it, *boom* everything comes back to life.
Recently however, after closing and reopening the lid, FF tells me that it has gone into Offline Mode. I haven't found anything in the Tools/Options to fix the problem, so I have to close and restart. Granted, this isn't a major problem, but it's an annoyance.
Any ideas of what has happened and how to fix it from going to Offline Mode?
Thanks much.

You can try to create a new Boolean pref with the name network.manage-offline-status and set the value to false.
You can right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
<pre><nowiki>Name: network.manage-offline-status
Value: false
</nowiki></pre>
See http://kb.mozillazine.org/about%3Aconfig

Similar Messages

When I install firefox version 4, it is in offline mode and I cannot open it. How do I get around this problem.

when I install firefox version 4, it is in offline mode and I cannot open it.

In version 3.6.17, click '''File''', then click '''Work Offline '''to remove the checkmark.
In version 4.0.x right click a blank part of the Tab Bar and then click "Menu Bar". This will reinstate the text links. Then do the same as above.
To revert to the layout without the text links, repeat the same steps.
Sometimes, in FF4, you can hit the ALT key to toggle the text links on and off, but I've noticed in posts from other users that it doesn't always work.

I am trying to search the web when I click on Firefox Icon this message shows up Offline Mode Fire Fox is currently in offline mode and can not browse web how do I fix this?

I am trying to search the web when I click on Firefox Icon this message shows up Offline Mode Fire Fox is currently in offline mode and can not browse web how do I fix this?

Firefox does not have a built-in "Run" option on downloads for security reasons. If you "Run" an item, your anti-virus/anti-spyware may not have an opportunity to fully examine the contents until it is already installed on your hard drive. Result: damage, if infected, is already installed on your system.
With that in mind, you can install the following add-on, but you accept the risk mentioned above ('''NOTE:''' the developer has not updated this product -- OR any of his other 7 extensions -- to be compatible beyond Firefox 3.6.x; therefore, when you upgrade to a more current version of Firefox, you may lose the functionality of the add-on if the developer does not update it.):
*https://addons.mozilla.org/en-US/firefox/addon/opendownload/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

ITunes can't connect to Apple TV sometimes after sleep and wake up

Hi!
There are any issues to find in the discussions depending on problems between the ATV and iTunes but no solution helps me to solve the following problem till now.
I am using a Mac mini (middle 2011) as a central storage for multimedia data. The exact description of the network can you find further down.
The problem is that iTunes sometimes can't connect to the Apple Tv via Airplay. There is a window open what tells me that iTunes try to connect to ATV. But it doesn't work.
After determine iTunes completely (normal closing doesn't work because of that open window) and restart it, it will work probably.
Itunes is connecting to ATV via Airplay immediately.
Sometimes it works for any days with a view sleep and wake up procedures. Sometimes the problem appears while I'm listen to music after any minutes of starting.
I send the mini and the ATV to sleep with the remote of the ATV or let it go to sleep alone. To wake up ATV and mini I push a button on the remote.
Following components are working in my network:
- router FritzBox 7390 from AVM (2,4 and 5 GhZ at the same time)
- Mac mini (middle 2011) connected via Wlan
- two Airport Express with connected loudspeakers in various rooms (Wlan)
- Apple TV (third generation) connected with home cinema via HDMI and with the network via Wlan
- Telekom entertain setbox for TV connected via LAN over Wlan bridge
I have tried to use the whole system with an Airport Extrem as router for wlan but the problem was the same.
I suppose it could be a problem with DHCP Lease or the Bonjour? What can I do?
Last but not least...the devices have installed the newest firmware or software versions.
Thanks a lot for support!
Norman

i bit the bullet and re-associated library on ATV. On atv, setting/computers; current library was grayed out, clicking creates a warning that all media on ATV will be lost, it takes its time to earase the disk, then an option to connect to itunes becomes available just like fresh setup. ATV produced a code to enter into itunes. itunes complained that it cannot communicate on port 3689; googleupdate.exe was using this port; disabled googleupdate; rebooted everything for good measure. so now i'm waiting for 100GB of home movies and music to sync to ATV (thanks apple!). one thing that got me stumbled - when ATV showed up, there were not tabs for music, movies, podcast, etc, only settings and photos; solution: deselect 'automatic sync' by selecting 'custom sync' in the settings tab.

Why won't the sleep and wake button work

the sleep and wake button has stopped working.

If you have Warranty or AppleCare make Genius reservation and take to Apple for resolution. If you would like to try perfect Virtual Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock. You can even turn iPhone OFF with this button. To turn iPhone ON, connect iPhone to power ie charger or USB of computer.

I was playing songs on Itunes while charging then my iphone 3 suddenly turned off. I pressed sleep and wake botton for 10 mins but no logo appeared.What happened?

I was playing songs on Itunes while charging my iphone 3 then suddenly turned off. I pressed sleep and wake botton for 10 mins but no logo appeared.What happened?

Sorry, but if you see the "connect to iTunes" screen on your phone, the only option is to restore, backing up the phone is not possible at this point, even importing the photos might not work anymore.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

TS3274 the sleep and wake button can not work

Now my sleep and wake button can not work. When I press it either long press or short press. no response at all.
, then I long press the home button to restart the ipad. It appears the apple logo, but after a while, the screen just a flash, and then restart again, and the apple logo appears again. It never restart properly until I plug in the USB cable with it to connect it with PC.
What is wrong with my iPad, pls help, much appreciated!
-Will

I can't understand you.
1. What sleep/wake button are u talking about? You mean the power button? Sleep/wake is a function, not a button, which works for covers that supports it.
2.You press home button to RESTART ipad?? what home button? the one at the bottom of the screen or at the top?

I purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.

Can I stop Firefox from always opening in Work Offline mode because it's preventing my Macbook from accessing Internet on our wireless home network?

Sorry, I should have said iMac, not Macbook, if it makes a difference. The problem is Firefox 3.6.10 always starts in Work Offline mode, and Internet won't activate unless we restart, sometimes up to five times.
The iMac is on our home wireless network which we had no problems with before using Safari on the Macbook we upgraded from.
Note: I'm posting this query from another computer.

Did you check the network setting?
Sounds that you have set to connect automatically when a connection is not available.
*http://kb.mozillazine.org/Autoconnect
*http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

Scripting sleep and wake-up

Until Parallels gets rid of the requirement to make the MacPro sleep and be re-awakened before running Parallels to its fullest extent, has anyone put together a script that would cause the machine to automatically sleep for 10 seconds or so and then wake back up whenever the machine is started. CAN a script wake up a sleeping machine?
MacBook Pro 2.0 MacPro 2.66 Mac OS X (10.4.8)

Yes, A reminder would be simple, but I already get that when I attempt to open Parallels without first putting the machine for sleep for a while.
Thus the initial question...
Can a script wake a sleeping machine, and if so, does anyone have one that could run automatically to put the machine to sleep for about 10 seconds, then wake it back up?

Interesting Sleep and Wake problem

For about a month I have found that the Macbook pro (2008) Osx10.7 doesn't seem to sleep when the cover closed with the power cord attached. The sleep light doesn't pulsate and it remains warm. When i open it up the log in screen flashes on, then the screen goes dark and I can't log in. I found myself doing forced restarts - then i disconnected the power cord and the log in screen magically reappeared.
It seems I need to disconnect the power cord wehn closing the lid, and if I forget to do that I need to disconnect when reopening the lid in order to log in.
I have tried resetting all the power settings to default, but it still does that.
Not a major problem, but puzzling.

The problem isn't so much that it won't sleep or wake. It does seem to do both more or less, but that if the power cord is connected it doesn't fully sleep (the LED doesn't blink) and that waking results in the login screen flashing on momentarily followed by a black screen which requires either a forced reboot or simply unplugging the power cord. Once the power cord is unplugged then logging in is easy as the screen recovers.
My question is why is this happening? Some new feature of lion? It has only been going on a few weeks.
It was quite troublesome until I figured out I could resolve the problem by unplugging the power cord, but I remain mystified as to why it happens.

Unix calls to sleep and wake

i understand that i can get a computer to sleep using applescript.
osascript -e 'tell application "Finder" to sleep'
is there anything that i can do to wake a sleeping computer?
thanks!

That's not a Unix call, but close. It's an Apple Script as you note.
How do you want to wake it up? If you choose wake on Lan, you can wake it up from another computer. You can set a time in preferences to wake it up.
You can probably write a script to note when it went to sleep and use iCal to wake it up.
You might be better posting in the script forum for these things -
Applescript: http://discussions.apple.com/forum.jspa?forumID=724
and Automator: http://discussions.apple.com/forum.jspa?forumID=1261
and for real Unix scripting, here:
http://discussions.apple.com/forum.jspa?forumID=735

Sleep and wake up question

It's no easy to recognise is new Air is sleeping or not, because there is no sleep light.
I see interesting difference on wake up process for two cases:
1. System Preferences - Energy Saver - Computer Sleep = 1 minute
- I wait more than 1 minute and computer is looking like sleep. Maybe no?!
- To wake up it I can swipe touchpad or gently touch.
2. Pressing power button and click Sleep
- Computer is looking like sleep.
- To wake up it I should press touchpad (swipe or gently touch doesn't wake up).
Questions:
1. Is wake up process normal for case #1? Is computer sleeping if to wake up touchpad swipe enough?
2. Why there is difference for wake up process for case #1 and #2?
A lot of thanks!

Hi,
Case one is for putting display to sleep only. The cpu will still running and your program like VLC will keep running.
As for case two is real sleep, meaning your cup will sleep and all your progaram will stop running.
Go to system preferenc-->expose and spaces-->expose-->active screen corners-->choose one of the drop down menu and you'll see put display to sleep.
Cheers.

Display repeatedly sleeps and wakes - Geforce FX 5200 DVI

Hi There
I own a G4 powermac Quicksilver (733MHz) 10.4.11.
For a long time I have been using an old mitsubishi 17" monitor alongside my powermacs standard 32mb VGA graphics card.
Recently I decided to buy a 20" Apple Cinema Display and a new Nvidia GeForce FX5200 256mb (DVI and VGA) graphics card which would apparently work with my g4 and the display.
I installed the graphics card firstly using it with my VGA monitor and everything appeared to work fine. I later tried it with my new apple display and everything was working at first but after about a minute of being on the display started repeatedly sleeping and waking constantly.
Now this is all that happens when I turn on my g4.
I thought it could possibly be a driver issue but I don't no were to look?
Does anyone have any ideas what I could do?
Thanks
Freddie

Yes, I am sure it's the same hardware (unless someone snuck into my office and made a switch) Musta been a full moon or something but at least I have a witness.
So what would be the cheapest VC upgrade that would permanantly reinstate the rotation.
Thanks for your imput

Sleep and Wake problems under Lion

I installed Lion on a Early 2008 Mac Pro (MacPro3,1), 2x Quad-Core Xeon 2400 series @ 2.8GHz, 10GB RAM, 120GB OCZ Vertex2 SSD, GeForce 8800GT with dual 24" monitors setup.
I did a clean install of the OS from USB key.
I've run into the following problems so far :
- When putting the system into sleep, it now takes more than 20 seconds for the fans to stop and for the system to finally enter sleep mode.
It took at worse 5 seconds under Snow Leopard for the same action.
- If 'wake for ethernet network access' is checked under energy Saver, the mac will seem to wake from sleep when another computer requests access (AFP or SMB share)
but the graphics card fan will spin up to it's maximum rpm setting, creating a high-pitched noise, just like the first 5 seconds when cold-booting the system.
However, the system won't be available via the network until i press one of the keys on the keyboard (or click the mouse), just like if I woke the Mac manually by myself.
Pressing the key also makes the graphics card go back into normal rpm mode.
- If the screens are already into sleep state (activated via ctrl-shift-eject), you cannot put the Mac itself into sleep by pushing the power button.
Instead, the screens wake up and nothing happens, the mac won't go into sleep. However, the Mac goes into sleep from normal screen activity.
- When waking from sleep, i've got no network connectivity from Ethernet, although System Preferences shows the card as 'connected'.
I now have to restart the Mac to restore connectivity.
I have already reset the SMC and emptied the caches, but the symptoms are still here. Snow Leopard had none of these problems.
Does anyone have the same problems ? Could a firmware update possibly fix these annoyances ?

I am having very similar sleep problems and have a few very clunky workarounds and observations. Observations: closing the clamshell on my MBPro will often fail to put the computer to sleep. The LED stays solid and does not throb, the fan spins and the CPU stays active. It will get hot if this happens for a while. This is probably only happening with the power cord plugged in, though I'm not certain. There are two "classes" of failure. This is the first. The other is the long wake-up: the power button will not wake the computer, nor will spacebar/return/escape hit repeatedly, until it decides its ready. But there is another more puzzling failure: clamshell closed, CUP running, I lift the screen and the login window flashes long enough for me to type my first characters, then the screen goes dark. I close the clamshell and the CPU goes back on, the LED shines brightly, the screen goes dark (no glowing apple on top). I lift and repeat.
I solved this issue by noticing that the screen would light up as I was closing the clamshell. So now I close the screen to about 1 inch from full closure, and then pull it back up to see not the login window, but my desktop ready for work. It seems like display, CPU, and power management are all out of sync.

Firefox sleeps and wakes up in offline mode.

Similar Messages

Maybe you are looking for