Firefox sometimes fails to open and an error message is displayed

Sometimes, when I try to open Firefox, it shows an error message saying that the file can't be found. I have to close the dialogue box and try to open the browser again and again until it actually opens. Typically, this happens in the 2nd or 3rd try but may take longer. Also, this doesn't happen every time I try to open Firefox. Is there a problem in the installation? The program itself works completely fine when I get it to open.

You can also try a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Similar Messages

I am trying to open my Preview application to view a PDF. However nothing opens and an error message, "Error -1712" pops up. Any ideas what I can do to resolve this?

I am trying to open my Preview application to view a PDF. However nothing opens and an error message, "Error -1712" pops up. Any ideas what I can do to resolve this?

Restart. If an application won't quit and prevents restarting, select
 ▹ Force Quit...
from the menu bar, then select the frozen application from the list and press return. As a last resort, force a shutdown by holding down the power button for a few seconds. Then press it again briefly to start up. Test.

HT201210 After downloading latest version of iTunes it will not open. This error message is displayed; The program can't star because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then a second error box

After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

How to reset firefox without openning the firefox as after repeated installation it fails to start and gives error message " Your Firefox profile cannot be load

"Your Firefox profile cannot be loaded. It may be missing or inaccessible."
I dont know why this message has appeared. i have tried uninstalling and reinstalling firefox after completely deleting all files and folders of mozilla from program files and registry.Despite of that firefox will not start and keep giving error message. i can not reset firefox without openning firefox.Profile does not open in window search.
On openning app data profile manually there is nothing much i can do as it shows [General]
StartWithLastProfile=1
[Profile0]
Name=default
IsRelative=1
Path=Profiles/2tt76737.default
how shall i fix and restore firefox as i am desperate please , please help....

Does that Profiles/2tt76737.default still exist?
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

"Extraction Failed: Cannot Open Output File" error message when installing new drivers

Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer. I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
Extraction Failed
Cannot Open Output File
And the process closes. It happens at about 85% extraction every time.
Any idea why? I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support?? Poor, poor customer service.
This question was solved.
View Solution.

Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

Firefox doesn't completely close and an error message comes up

It wasn't until this current version 10 of Firefox, did I start to experience an issue that seemed odd.
Every time I close out of Firefox, I am assuming I'm completely out of it, but it's still running in the background. Shortly after I close Firefox (and it's still running hidden), I get an error message that pops up and it says:
''A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.''
''Script: chrome://browser/content/sanitize.js:133
At the bottom of this window it gives you two options: CONTINUE (and if you press that, Firefox stays hidden in the background, still running with plug in folders), or STOP SCRIPT (which, if you click on that, will shut down Firefox completely).
So why is this occurring now as it is totally inconvenient and something that has not occurred with previous versions of Firefox?
Thanks for listening....
Ben Herrmann
It does this on both of my computers.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

ITunes will not open and no error message appears

For some reason my iTunes will not open and I get no error message at all. The hour glass appears to be working, then the terms & conditions flash. Then thats all...HELP!

Try the 3rd arrow bulleted list item "Clean up iTunes installer files on the computer" http://docs.info.apple.com/article.html?artnum=93976
~.~

FF won't open and an error message appears on the screen "unresponsive script" it I open task manager and stop the error message FF runs normally, how do I fix this problem

This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
I have had this problem before and had to reinstall an earlier version of firefox.
The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well. 
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Failed to open service OracleDEV102TNSListener , error 1060

Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
I have set the all the Environment variables , i run r3trans -d and the result is
C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Event Viewer result is
----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.
finally in SAPINST logs i could see

Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,

Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards,

Failed to open the connection error using Business View OLE DB

I have a Crystal Report built on a Business View with the db being accessed by an OLE driver. Everything works fine using Crystal Designer, but when I try to access it through BOE I get the "Failed to open the connection" error. I have the ole drivers installed on the server.
We are on BOE 12.1.0.
The db is IBM as400.
Suggestions??

Ok so I spent the day trying to find the differences between the working and the non-working application. I began by adding code one piece at a time to the working application. The goal was to try and get it to break on the deployment server. I found the lines of code that is causing the break on the deployment server. Here it is:
    private void setReportParameters()
        try
            crystalReportDocument.SetParameterValue(0, reportUserName.Value);
            crystalReportDocument.SetParameterValue(1, reportArea.Value);
            crystalReportDocument.SetParameterValue(2, reportCDR.SelectedValue);
            crystalReportDocument.SetParameterValue(3, reportStatus.Value);
        catch (Exception ex)
            throw ex;
This sub-routine is called from my button click code and is used to set the parameters for the report. Once I added this to the working application it broke also. My goal here is to send the parameters to the report from a form the user is filling out. Please keep in mind this code works in Visual Studio 2005 and my local IIS server running on my development machine. It breaks on the target deployment server
The code broke on reports with sub-reports as well as report with no sub-reports. As soon as it was added and deployed the application through the "Failed to open the connection" error.
Thoughts?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

Happily used Firefox for 2 years, suddenly it won't open - getting this error message: "Platform Version incompatible with minversion =1.9.1.11 maxversion =1.9.1.11" What can I do?

Before this happened, I was having a problem for about a month where Firefox wouldn't close. I'd close the browser window, and later when I tried to reopen it to connect to the Internet, I 'd get a msg saying that Firefox is already running, and I must close the current window before opening a new one. I'd have to restart my computer at this point.
I don't know if this is related to why I can no longer use Firefox at all.

The "Platform version incompatible" error message can be caused by a problem with the installation of Firefox. Remove your current installation of Firefox and re-install.
# Delete all the files and folders inside the Firefox installation directory - C:\Program Files\Mozilla Firefox\
# Download the latest installer from [http://www.mozilla.com/en-US/ Mozilla] and install it.
Doing the above will not remove your bookmarks, passwords etc, since they are stored in a separate folder.
If after re-installing you get the "already running" error, see [[Firefox is already running but is not responding]].

When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." I have to sign in with my username and password. Richard

When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." I deleted Firefox and reloaded it - did not solve the problem. This started occurring after I downloaded Windows Service Pack 2. I have Vista 7 OS. So every time I close and relaunch Firefox, I have to sign in with my username and password. Very very, annoying. If I can't get this corrected, I have to start using another Browser. Thanks for your help. Richard

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well. 
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Firefox sometimes fails to open and an error message is displayed

Similar Messages

Maybe you are looking for