Firefox starts fast but runs slow

I have changed security software to McAfee as zone alarm was giving me problems. I reinstalled Firefox and xmarks Firefox will load fast but when I click on my bookmarks I wait for a long time then when I click on the book mark that I want to use it takes for ever to load
== This happened ==
Every time Firefox opened
== just download Firefox again ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

Hello Donald.
This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
#clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can't help you further.

Similar Messages

  • Why is Firefox 4 "running", not start up; but, running so agonizingly slow?

    Firefox 4 is running, not start up; but running agonizingly slow! It is absolutely infuriating-the previous version was much faster than this one-what is going on?

    I have the same problem. It isn't only that it is running slow but when I am typing it is as if it pauses and then the words catch up. Also going from tab to tab there is a pause. I have high speed and it is almost as bad as being on dialup again. How do we fix this? At least before the update it ran better.

  • Lightroom 5 version 5.0 starts out fast, but then slows my computer to a crawl.  What to do?

    I upgraded from Lightroom 4 to Lightroom 5 after the release version 5.0 came out.  But it doesn't work well.  It starts out fast, but performance rapidly deteriourates.  And it affects every application running on my Windows 7 PC.  I assume this is due to massive memory leaks.  The only way out seems to periodically reboot my machine. 
    I've had this happen without doi
    ng exports (which was reported as a cause of this behavior by others).  I get it just using the Developer module and having many steps with many photos.  Also with the Book module it happens very soon.  Does anyone have a workaround until Adobe actually fixes their product so it works right?

    I'm having the same issue.  I'm running the trial version, but in 3 days when the trial is over I don't expect to upgrade.  LR4 works great on my machine.  LR5... there's a problem here Houston.  Fix it and then I'll think about upgrading.
    BTW - the tool I had high hopes for - the enhanced spot heal/clone tool... good idea, but needs work.

  • Firefox start page but then nothing

    I tried to upgrade to Firefox 3.6 and now all I get is the Firefox start up page and then nothing happens! I tried to lower the firewall and then reinstalling Firefox but still nothing but the start page!

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • Firefox starts fast in safe mode, but slow in normal mode with all extensions and add-ons turned off.

    It's only the first screen/tab I open after firefox is completely shut off... it shows the borders of the screen for 5 seconds, before showing the content (empty page) and then I can start and everything after that is fine.
    In safe mode it opens without delay, so my question is, what in the normal start-up could be causing this delay, I have reinstalled firefox, disabled all extensions and plugins.

    Hello ellina, try disabling graphics hardware acceleration and check it again.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    #Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
    #* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
    #In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
    #In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    #Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    '''In safe mode, also, hardware acceleration is disable''', see : http://kb.mozillazine.org/Safe_mode
    Thank you.

  • Process runs faster when executed independently, but runs slower when a parallel big process is running

    Hi,
    The issue is,  a process, say "A" is running fine on certain days. On some days there are additional processes running on the server. When these additional processes are running, "Process A" suffers performance issue.
    Interesting point is that, these additional processes were running since long time. But, earlier "Process A" was running fine even when these additional process were running. Suddenly from past 2 or 3 weeks there is performance issue in "Process
    A", when these additional process run.
    Note: Nothing has been modified for the process A.
    Process A is an SQL job which has SSIS Package and stored proc in different steps
    When multiple parallel processes are running, SSIS Package step suffers around 40% increase in execution time, where as stored procs have only 15-20% increase in execution time
    When Process A is executed while no other big processes are running, it's execution time is fine. From past few days, issue is only when, some other big parallel processes are running.
    Currently below is my analysis:
    Since Process A is running fine when it is executed independently, I assume there is no issue in this process.
    Since issue occurs when some other big process is running, when Process A is running, I believe it is DiskIO issue. Will the issue be resolved if RAM size is increased?
    Is there any way to check if RAM is being fully utilized by the server
    Is there any other possibility why there is a sudden dip in performance when parallel processes are running.
    Is there any possibility of having issues in additional processes. Incase if it has some issues, does it impact "Process A"
    Please let me know if you need any further information. Infact I am not able to diagnose what is the actual root cause for the performance issue in "Process A" as nothing has been modified.
    Also it would be very much helpful, if I get any idea on different ways in reaching the actual root cause of this performance issue.
    NOTE: This is a data warehouse
    Thanks,
    Raksha

    When a query has a parallel plan, it will in general try to grab all cores up to the maxdop setting, but then it often uses them inefficiently. 
    But in that case, there are better odds for the queries not battling on resources with each other!
    What Josh alludes is to the fact that SQL Server needs to partition the data, so that different partitions are processed on different cores. This partitioning is based on statistics, and the statistics may be out of date or not accurate enough. This may
    result in that the data is not partitioned proportionally, and some threads gets very little data to work with. Thus, these CPUs are still idle, so there may still be room for the two processes to run at full speed. (That is, full speed with the given plan,
    which is not the full speed, had the partitioning been accurate.)
    I mention this because you asked about parallelism, and many systems leave maxdop at its default setting of 0 (which means "go ahead and grab everything!") even though Microsoft recommends you set it to a different number depending on this and
    that.
    Since this is a data warehouse, Raksha should not tamper with "max degrees of parallelism", I think.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Firefox 7.0.1 runs slow in text boxes typing on N570 processor

    Help!
    Also happened on firefox 6.7+!
    When i type in text boxes (such as this one!) , firefox runs incredibly slow --- but only on text entry.
    A least a second per characater typed!
    browsing fine. only typing! INTEL ATOM N570 processor.

    Do you have multiple keyboard layouts installed?
    It is possible that you have switched the keyboard layout by accident.
    * http://support.microsoft.com/kb/258824 - How to change your keyboard layout
    Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
    * http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
    * Make sure that you have the Language bar visible on the Windows Taskbar
    * You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
    * Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
    * You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

  • After installing Firefox v 22, AppleWorks runs slow and hangs up. Can I unintall v 22 and revert back to Forefox v 21?

    I work on a iMac Intel Core 2 Duo - OSX 10.6.8 I rely on using AppleWorks v 6+ (Classic mode -Rosetta) I have over 3000 records in an AppleWorks data base and do not want to lose these records.
    Also, I run two Operating Systems on my computer - one (OSX 10.6.8) in my internal HD, another from a 2TB external HD (also OSX 10.6.8). Although I do not recall doing so, I must have downloaded and installed Firefox v 22 on my "internal" HD. Since doing so, AppleWorks hangs up and sometimes requires me to Force Quit the App. However, when using my external HD (which still runs Firefox v 21) when I launch AppleWorks (from my Applications folder on my "Internal HD) I do not experience any problems with AppleWorks. The problem with AppleWorks hanging up or not responding, began only after installing Firefox v 22 on my internal HD. I have no idea why but Firefox v 22 is definitely causing problems with AppleWorks v 6+
    Is it possible to revert back to Firefox v 21 (if I uninstall v 22)?

    I 'm facing the same problem but I don't want to uninstall better to Roll back to my previous version . 'cause many plug-in ( which is most usefull and important to me ) not supported with my present version V22. like easy youtube .
    I want to know what is the benefit if I don't get any better opportunity from upgrade version and also lose my previous version's facility !

  • After updating to latest firefox computer on internet running slower,taking longer to go to links and sites.also if i click on an email link the link keeps refreshing as mailto and wont stop opening new tabs very quickly,have to shut down to stop it.

    since installing latest update,when using internet,email everything has slowed down and is taking long to go to websites to upload pictures to emails.
    also when i click on an email link to send email the tab bar keeps refreshing and opening a new tab very quickly all i can read cos its going so fast is mailto this has happened several times on various websites,i clicked on a email us link on grangerhertzog.com yesterday and it did it.

    You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
    *https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows

  • Title in motion starts fast and ends slow... need to make it consistent across the motion. Deadline is very soon! help!

    I made a title, and used the motion tool (position and scale) in effect controls to move it across the screen, while making it bigger. When I see the motion at hand, it starts very fast and ends very slowly... how do I edit the speed of that motion? working with Mac BTW. HELP

    Control it with Key Frames.
    If you have applied  no KFs it should be linear (constant) already.

  • Project run smooth when compiled but run slow in flash player

    Hey guys,
    I have an interactive clip i made for a band.
    The clip is compound of mini games and videos.
    When I compile the project is FlashDevelop - everything runs smooth and nice at 24 fps.
    When I run the swf through the flash player (10.1 r52) the clips runs very slow (1-5 fps).
    Does anyone encountered anything like this?
    Thanks
    Eldad

    1.  update your flash player
    2.  make sure you have no trace statements in your swf
    3.  make sure there are no debug options selected when you publish your swf.

  • Spilled coffee on MBP. Now it turns on but runs slow.

    I spilled coffee on my MBP (just black--no sugar). I took it to the Apple store, where they said I lucked out because it didn't look like anything was wrong. However, now that I'm home it seems to be running REALLY slowly. Is there a solution for this or am I screwed?

    Turn it off, remove the battery, and disconnect the charger. Take it ASAP to your local Apple retailer. The longer you wait the more damage will be done.

  • WHAT TO DO IT MAC STARTS LAG AND RUNNING SLOW??

    please help me!
    thanks

    Hard drive space and memory are two different things.
    When your Mac slows down, it could be because there isn't enough free disk space.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
    Freeing space on your Mac OS X startup disk
    MIght also be a good idea to check the startup disk in case it needs repairing.
    Using Disk Utility to verify or repair disks

  • WRT120N - Wired is Fast but Wireless - SLOW

    I have been away at college and I returned to my parents router to see that when hooked in wired to the router - I get 100mbps. Yet wireless (anywhere in the house, even next to the router) I only get 65 mpbs and it flucturates between 35-65mbps.
    Anyone have an idea how to fix this problem?

    Try to change the wireless channel on your Linksys router .
    Also do the Advanced wireless settings like :
    Beacon Interval = 50
    Fragmentation Threshold = 2304
    RTS Threshold = 2304 .
    See if that helps you .
    Also make sure that drivers for the wireless adapters are updated .
    What is the current firmware version on your Linksys router ?

  • Format command runs slow on Windows2012 when run through service

    We have a windows service which performs some tasks. One of such task is format the given volume(volume name is passed from remote machine). We observed that till Windows2008 format was running properly. on Windows2012 same format starts correctly but runs
    very slow. One special case if if the format is quick it runs fast (same speed as windows2008).
    Another observation is when we start format as process though we set the priority high after start the priority of the process goes to normal
    Any reason why format runs slow?
    Any help/comments are welcome

    here is some code 
    We do not use bat file but use process.
    Here is some part of code for this
    ProcessStartInfo FormatInfo = new ProcessStartInfo();
                    FormatInfo.CreateNoWindow = true;
                    FormatInfo.UseShellExecute = false;
     FormatInfo.RedirectStandardOutput = true;
                    FormatInfo.RedirectStandardInput = true;
                    FormatInfo.FileName = "cmd.exe";                
                    Process format_process = new Process();
                    format_process.StartInfo = FormatInfo;
                    if (true != format_process.Start())
                        int errCode = Marshal.GetLastWin32Error();
                        String ErrMsg = "Cannot start formatting. Error code = " + errCode.ToString();
                        Logger.LogDebug(ErrMsg);
                    String FormatCmdLine = "Format ";
                    FormatCmdLine += m_driveletter + ":";
                    if(quick_format)
                        FormatCmdLine += " " + Constants.QUICK_FORMAT_SWITCH + " ";

Maybe you are looking for

  • How to display values of shuttle pane by defaul in left shuttle

    Hi I have created shuttle pane through JDeveloper and I have set all properties It also displays on page well there are two boxes or shuttle displayed one is for containing all values another for selected values but in my case bydefault all values ar

  • WinXP not reading 1800+ correctly???

         I have a KT3V mobo with an Athlon XP 1800+.  In the bios i set the cpu to run at FSB - 150MHz / ratio - 11.5.  This should result in a 1.725 GHz speed, but WinXP (when I check system in control panel)  says its only running at 1.17 GHz.  The bio

  • Extract the message from correlation id what is this problem

    Message                                                                       Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=7.8... Leaving Monitored Scope (EnsureListItemsData). Execution Time=9.6533039437744   Leaving Moni

  • RG23A Part 1& 2

    Hi Masters, Can  any one  help me this report i.e, RG23A Part 1&2. please put lights on this issue. Thanks & Regards, kalyan.

  • Anyone familiar with jvmstat?

    i'm trying to view my garbage collection information using visual GC. i can log the gc fine but can't find the "jps" file in the jvmstat folder "c:\jvmstat\bat" as the instructions in my advanced coldfusion book instructs me. i'm trying to find the I