Firefox stucks in update loop
== Issue
==
I have another kind of problem with Firefox
== Description
==
This is a ******* problem. It is rediclues. I need to open IE and download firefox to update it. it is shameful.
<blockquote>removed profanity -MJB</blockquote>
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; HPNTDF; .NET4.0C)
See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the ''updates'' and ''updates\0'' folder:
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
C:\Program Files\Mozilla Firefox\updates
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\updates
Similar Messages
-
Anything i try related to firefix gets "Your computer must be restarted to complete a previous upgrade of Firefox" I have tried rebooting no luck, i have tired uninstalling from add remove programs or installing 4.0 over it. At the time I was try to upgrade from 3.0 to 3.6.15. I tried searching for the xpicleanup.dat file but no luck there.
Any suggestions to get firefox back up and runningI was having the same problem, so I deleted 'firefox.exe.moz-upgrade' from 'C:\Program Files\Mozilla Firefox' directory, as recommended. Now it no longer says it needs a restart to complete a previous installation. It says it needs a restart to complete a previous uninstall. What do I do now? Help!
-
Toshibia Satellite C75D-B7230 stuck in update loop
Brand new laptop, not even a month old yet. Im not sure what happened but for some reason Windows couldn't complete the updates and is undoing the changes and that was 3hrs ago. After hour 2 I shutdown my laptop even though it said not to and its stuck in this constant loop of updating then undoing the changes and I've tried to get it to boot in safe mode using SHIFT+F8 but its not working. I've literally ran out of ideas. I backup my laptop on the regular so I'm not afraid of a factory reset at this point
Satellite C75D-B7230
See if you can get out of the loop this way.
Performing a power cycle on a Toshiba laptop
If you can reach the Welcome (sign-in) screen, you can do all sorts of things. Click Power (at the lower right). Then Shift + Restart gets you to the Choose an option menu. From there, any of these.
Troubleshoot > Advanced options > System Restore
Troubleshoot > Refresh your PC
Troubleshoot > Reset your PC
-Jerry -
No Blue-Ray on QuickPlay, Stuck in Update Loop
I have not been able to play blue-ray disks for some time on my Pavilion d5v-1017ns but I have not been actively working on the problem till now. The blue-ray player worked fine till I updated the Vista 64 bit media center software from Microsoft. Recently I updated all my laptop software using the latest HP assistant, checked the hardware (Blue ray disk reads OK) and I turned off my Norton Security Suite but the symptoms are the same. The symptoms are as follows:
“Inception” Blue-ray disk inserted starts HP QuickPlay. QuickPlay says “Loading” then a popup says “A component of the player requires periodic updates. Would you like to check for an update now?” If I say “YES” the screen blinks, the player says “Loading” and it happens all again. If I say “NO” nothing happens till I press play then it goes into that loop again. I have HP QuickPlay version 3.7(6310). If I manually update the HP QuickPlay software I get the same thing.
This question was solved.
View Solution.@ LT4747
You may post where ever you like, as a matter of fact it's probably better that you post in a thread with a similar problem.
What was the Blu-ray movie you were trying to play and can now play ?
To get the thing to stop prompting for an update, go to the control panel and find "Auto Play" and make sure that Quick Play is chosen for Blu-ray play back. If you have to change this, remember to save the change. If you made the change, shut the laptop right down and boot up, do not use restart.
Use the eject button on the side of the drawer and let the movie load automatically, you may get the prompt again, but it should load and after that it should stop altogether the next time you play a movie.
This works most of the time, but not always, sometimes a BIOS update is needed, but if you can play your movie, don't touch it, leave it alone.
Quick Play is an old program that HP (Cyberlink) replaced with Media Smart DVD, personally I have given up on it and I have people use Media Smart. The reason for this is that no matter what I did many of the newer Blu-ray's would not play with QP. The fact that you got your movie to play with it is a surprise, so that means that Cyberlink does update it, but I know it takes then forever to do so.
Think about though, it's an old program that was developed for HP that HP doesn't use anymore, so it more then likely is the last thing that gets any attention, it's a wonder that they still bother with it.
Just to note that if you were to use Media Smart DVD your Quick Play button on your hot-key strip would not work anymore. You would have to create desk top Icon or something to open it. -
Firefox update is constantly failing and is stuck in a loop. I don't know how to bypass this. Help
When I start firefox, it automatically tries to install an update. This fails and it repeats, getting stuck in a loop which I can not get out of. Consequently, I am unable to open firefox and use the internet on this program. I have clicked ok, closed the dialogue box and ended the program using the task manager. None of these have worked. I prefer using firefox to other browsers but have had to return to internet explorer for the time being.
Do I need to uninstall and reinstall firefox or is there another option?See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
Do a clean reinstall:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling. -
My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?
My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?
If you toggle Airplane mode On/Off, does it resolve?
-
TS3694 Apple 4s stuck in a loop and not restoring or updating Help please!!!!
Apple 4s stuck in loggo loop and not restoring or updating. I have tryed all the recomended stuff all the youtube video EVRYTHING!!!!! I cant think of any reasone for it to not work .one minuet it was playing music on my sterio and the next this loggo loop. HELP PLEASE!! **** YOU APPLE!!!!
Maybe:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Or
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Safari 8.0.2 stuck in App Store update loop
Shortly after updating to Yosemite (10.10.1) the App Store notified me of the Safari 8.0.2 update. I have not been able to successfully apply the update; every time I try, the App Store gets stuck in a loop where it appears to download and install the update, but actually won't. Immediately after this "fake install", Safari is added to the list of recently-updated apps, but I'm still prompted to update it.
This issue was presented in the following thread, but no resolution suggested in that thread has worked thus far:Safari 8.0.2 will not installHi
This was really bugging me too and no thanks to Apple for helping us out!
Here's how I've just fixed it:
Go to System Preferences and select the App Store (4th row 3rd in on mine) and uncheck all the boxes. Quit Safari and open the App Store from your Applications folder (or anywhere else you might have it) and then try the update again. Mine has finally worked after the umpteenth time. I think its set-up to download from iTunes and the two get confused but by doing this it works!! You may want re-check those boxes in System Preferences/App Store afterwards?
Enjoy -
Today I updated, thru itunes, my iphone4, and restored backup, but am stuck in setup loop. After few screens of setup phone says "connect to itunes" or "connected to itunes". I turned off the phone and turned back on - still stuck. Help, please?
Unable to Update or Restore...?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
After ios 8.02 update iCloud Drive is stuck in a loop that reads "upgrading" with a spinning wheel spokes for the last 48 hours.
There's a solution posted here that may work for you: iCloud Drive won't stop upgrading.
-
Stuck in Apple Apps update loop.
I am a new Mac user. I was updating software (DIgital Camera 4.0) in Apple Apps and received a notice to close Safari before continuing. I closed Safari and my machine s stuck in an update loop. I can't delete the notice from my screen, close Apple Apps nor suht down. Is there a way to stop the update and clear the notice from my screen?
Mine is doing the same thing and won't charge. It stays at 2%....this happened suddenly.
-
How to recover ALOM Main Flash (ReFlash EPROM) ? -- ALOM stuck in a loop
Hello,
I had an issue while flashing the ALOM Main Flash of a Sun Fire v210.
Now the ALOM boot is stuck in a loop trying to load the main ALOM image.
As a result the ALOM Main Flash is broken but I can still access the
ALOM Boot Menu. I can also boot Solaris with the Jumper on FP2 or FP3
but it does not recognize the SC anymore.
Is there a way to recover it from Solaris and/or using the
"f - Wait for flash download from host" from ALOM boot menu ?
ERROR ON ALOM Boot
Failure: CRC Error - ReFlash EPROM.
Main Sectors FLASH CRC Test, FAILED.
ERROR ON "OK >"
ERROR: ERROR: Unable to open the SC device.
ERROR ON SOLARIS
WARNING: DP_GET_SDP_VERSION failed, ret=4
scadm: The SC hardware could not be initialized.
MORE INFO:
ALOM LOOP:
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.10
ALOM Build Release: 001
Reset register: f0000000 EHRS ESRS LLRS SWRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.10
ALOM Build Release: 001
Reset register: e8000000 EHRS ESRS LLRS CSRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
JP2 1-2 IN ALOM Flash Recovery
JP3 1-2 IN ALOM Reset
JP12 1-2 IN ALOM Console Bypass
http://www.sunshack.org/data/sh/2.1.2/infoserver.central/data/syshbk/Devices/System_Board/SYSBD_SunFireV2x0_CPU.html
Executing Power On Self Test
0>
0>@(#)Sun Fire[TM] V210/V240,Netra[TM] 210/240 POST 4.30.4.a 2010/01/06 15:10
/export/delivery/delivery/4.30/4.30.4.a/post4.30.4-micro/Fiesta/enxs/integrated (root)
0>Copyright 2010 Sun Microsystems, Inc. All rights reserved
0>OBP->POST Call with %o0=00000800.01014000.
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
Configuring system memory & CPU(s)
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V210, No Keyboard
Copyright 2010 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4.a, 8192 MB memory installed, Serial #********.
Ethernet address *:*:*:*:*:*, Host ID: ********.
Running diagnostic script obdiag/normal
Testing /pci@1e,600000/ide@d
Testing /pci@1e,600000/isa@7/rtc@0,70
Testing /pci@1c,600000/scsi@2
Testing /pci@1c,600000/scsi@2,1
Testing /pci@1e,600000/isa@7/serial@0,2e8
Testing /pci@1e,600000/isa@7/serial@0,3f8
ERROR: ERROR: Unable to open the SC device.
ERROR: ERROR: Unable to open the SC device.
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
v210 console login:
WARNING: DP_GET_SDP_VERSION failed, ret=4
WARNING: DP_GET_SDP_VERSION failed, ret=4
v210:~# cd /usr/platform/`uname -i`/lib
v210:/usr/platform/SUNW,Sun-Fire-V210/lib# /usr/platform/`uname -i`/sbin/scadm
download boot alombootfw
scadm: The SC hardware could not be initialized.
LOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: m
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
ALOM POST 1.0
- MENU MODE
Status = 00000020 I-Cache OFF Loop Mode OFF
System configured with a 50 MHz Clock
1 TTY External - Internal Loopback Test
2 TTYC - Internal Loopback Test
3 TTYD - Internal Loopback Test
4 TTY C to D - AFT Mode Loopback Test
5 TTY D to C - AFT Mode Loopback Test
6 Memory Data Lines Test
7 Memory Address Lines Test
8 Instruction CACHE Test
9 Data CACHE Test
A Memory Cells Test
B Boot Sector FLASH CRC Test
C Main Sectors FLASH CRC Test
E FULL_POST_TEST
X Exit to Main Menu
T Bring up the TOOLBOX Menu
Select a command by entering: 1 - E, X or T
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
1 TTY External - Internal Loopback Test
2 TTYC - Internal Loopback Test
3 TTYD - Internal Loopback Test
4 TTY C to D - AFT Mode Loopback Test
5 TTY D to C - AFT Mode Loopback Test
6 Memory Data Lines Test
7 Memory Address Lines Test
8 Instruction CACHE Test
9 Data CACHE Test
A Memory Cells Test
B Boot Sector FLASH CRC Test
C Main Sectors FLASH CRC Test
E FULL_POST_TEST
X Exit to Main Menu
T Bring up the TOOLBOX Menu
Select a command by entering: 1 - E, X or T
Main Sectors FLASH CRC Test
ALOM POST 1.0
- MENU MODE
Status = 00007fff I-Cache ON Loop Mode OFF
System configured with a 50 MHz Clock
ERROR: ALOM POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 08d743fc Calced CRC: 26469a8f
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
ALOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: d
OK. You're DOOMED!Anybody knows if the source code of scadm tool is available somewhere ? (opensolaris etc. ?)
I don't have any additional advice to offer other than asking that you to try the flash-update all over again,
one more time, as if it were the beginning again.Yes but how because the SC is not discovered anymore by Solaris :
"rmclomv: WARNING: DP_GET_SDP_VERSION failed, ret=4"
"The SC hardware could not be initialized."
Can you try to flash the mainalomfw ? Your log contained only the flash of the alombootfw !
/usr/platform/`uname -i`/sbin/scadm download alommainfw
I guess jumper JP2 allows to recover from a failed flash by selecting the un-touched half the PROM.It does not work as the SC is not responding anymore to Solaris
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
v210:~#
v210:~# cd /usr/platform/`uname -i`/lib/images
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images# /usr/platform/`uname -i`/sbin/scadm download alommainfw
scadm: The SC hardware could not be initialized.
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images#
ERROR: ERROR: Unable to open the SC device.
It's a pitty that obtaining OBP/ALOM updates requires a service contract. I got a V210 recently.
Unfortunately both OBP and ALOM are the intial release 4.8.2 / 1.0.I agree but it's probably also because you need support in case it fails ;-)
Thanks for your answers! -
IMac froze, rebooted but finder stuck in crash loop...
I have an iMac 2007 running Mavericks. Recently it has started occasionally freezing where my mouse still moves around the screen but everything on the desktop is completely frozen. After holding the on/off switch to reboot it usually comes back on and opens the folders/programs that were already in use and all is well.
However, today was different....it froze while I was using Safari....so I held the on/off switch as usual to reboot and the usual pop-ups appeared, asking me to re-open programs etc. However, since then I can't get finder to open...I have a constant flashing message saying "Last time you opened finder, it unexpectedly quit while re-opening windows. do you want to try to re-open windows again. - It gives 2 options 'don't reopen and re-open'....but the box is continually flashing very second as though it is stuck in a loop....doesn't matter what I try to press, it does the same thing over and over. It means I can access anything on my dock but cannot see my desktop files or any other files on the hard drive. I haven't done a time machine backup for a long time so wary of my next move. Ironically, I just bought a new drive for time machine and this happened before I got the chance to do the backup!!! Typical.
Other useful info may be that I think I only have around 3gb of free memory space on my hard drive right now.
I am on version 10.9.4 of Mavericks and there is a software update available.....should I try to do the software update to see if it irons this problem out or is there anyway I can backup my hard drive first or any other way of accessing my hard drive/desktop files before I do anything?
I have seen this problem related to Google Drive before but I don't use that...unless it is installed somewhere on my system without me knowing and still causing the problem?
Any help greatly appreciated....
ThanksLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste topost the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
Cheers,
JackFirst, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop). Use this to help you do this: http://support.apple.com/kb/PH3606
Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts. Tap the delete key on your keyboard (or right click /control click a contact and select delete).
You iPhone, iPad and iCloud.com should not be empty for contacts.
Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
Next, go back to iCloud.com and import your contacts (those exported .vcards). You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
Good luck. -
Windows Update Loop - Win 7 Pro - x64 :: Error 80071A91
Hi, I've been referred to this forum by the Microsoft community from this post: answers.microsoft.com /en-us/windows/forum/windows_7-system/windows-update-loop-win-7-pro-x64-error-80071a91/b17c5bc5-7977-4f8b-9b45-ecb265886381 (same as below)
Any assistance is appreciated. dave_ned at hotmail.com.
Hi,
"There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again"
I've got the error (80071A91) that others have experiences while trying windows update and for the life of me I cannot get the updates to install.
Looking for the past 4 hours via Google, trying different recommended things and still no luck
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-f964-4376-bfab-2f29ea127c6a
# SFC /scannow causes the "repair status message" and asks for reboot.
I've downloaded fix-it, tried booting into a system repair/restore disk using command line to run
#sfc /scannow /offline....
using the dispart to LIST VOLUMES (based on this http://mikemstech.blogspot.com.au/2011/12/how-to-perform-offline-system-integrity.html )
I've tried #fsutils resourse set autorevert=true (or something, can't find the exact post as I've rebooted so many times)
I've tried dismc.exe (or similar without success)
Basically I'm stuck with these updates (~10 of them) always sitting there downloading, installing every time I shut down the PC.
Running a system repair disk created in windows still does not allow #sfc /scannow....
My Last system restore was 04/08/14 and I cannot even restore the system to this point as the restore fails and asks to remove itself once I restart the system.
Details:
OEM version of windows purchased legally and genuine microsoft logo in system dashboard.
Intel Core I5 -3330
16GB RAM
Windows 7 Pro - 64bit OS
Service pack 1
**NOTE** I have the C drive hooked up in RAID 0. Two(2) * 60GB SSD disks in RAID 0 used as C: via BIOS RAID
Secondary storage disk a D:
Been working and updating fine for the past 5-6 months.
I have the Optical drive setup as O: and a Daemon tools virtual drive as drive E:
While running DISKPART and using LIST VOLUME I see this:
currently the system seems to have lost all update history
Any information or help on this is appreciated. I don't want to reformat and reinstall, I don't really want to 'repair' and wipe my current software installation so I'm hoping there is a way.
Anyway I can get the 'pending state' removed.?
Thanks in advance
DavidHi, I've rebooted into Repair mode (Console), (because repair said windows is installed on E:) run dism.exe /image:E:\ /cleanup-image /revertpendingactions
This gave a message about small scratch space but did say something out a fix. Upon reboot into safemode with console I received the same message
"C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
I then rebooted and tried SCF again, no luck... Same message, same updates still sitting there.
Partition info: (as mentioned earlier C is in RAID 0 with 2 SSD disks)
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 O DVD-ROM 0 B No Media
Volume 1 E DVD-ROM 0 B No Media
Volume 2 System Rese NTFS Partition 100 MB Healthy System
Volume 3 C NTFS Partition 111 GB Healthy Boot
Volume 4 D GB320 NTFS Partition 298 GB Healthy
Maybe you are looking for
-
Download and upload smartforms in 4.6C
Hi, Is there any way to download and upload smartforms in 4.6C?
-
I cracked my phone and replaced it. most of my pictures were transfered from the cracked iphone to the new one. however, it is not allowing me to delete any of the oringial pictures from the cracked phone on the new one. i am running out of space and
-
Bc4j: howto create master-master-detail viewlinks?
is it possible to create details with more than 1 master? i need this for multiple intersection entities. the masters must not be updatable. thanx for any hints, trevi
-
Hi Labview users I have 3852A DAQ, which is connected by GPIB-USB-B. It's data scanning/updating speed is lower than expected. It's reading 32 data (23 of thermocouple, and 9 of analog voltage), and the data updated every 2 seconds (While loop is set
-
any help cant sign into itunes or downloads any apps