Firefox Sync can't setup; can't see sync server

I've allowed mozilla.com, .net, and .org. but Sync says it can't see the server when I try to create an account.

https://twitter.com/mozservices/ Mozilla Services ‏@mozservices 2h
<blockquote>The Firefox Sync service is operating, however we are having some DNS propagation issues, which should be resolved very shortly.</blockquote>

Similar Messages

When I open up firefox, I can only see the top toolbar. No window/webpage appears. WHat is wrong?

When I open firefox, I can only see the top toolbar, including the tabs. The webpage and window below are gone. All I see is the top toolbar, tabs and my background... HELP!

Did you also try to delete the localstore.rdf file in the profile folder?
*http://kb.mozillazine.org/localstore.rdf
Try to reinstall Firefox.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I set up the the sync add on and had no errors.When I sync now I get"Sync encountered an error while syncing:Firefox sync server maintenance is underway..."I have gotten this mesaage for the last 10 hours.Should I wait or is there an issue with my setup?

I just loaded Firefox onto my laptop. I set up the the sync add on and had no errors. When I hit sync now I get "Sync encountered an error while syncing: Firefox sync server maintenance is underway, syncing will resume automatically." I have gotten this message for the last 10 hours. Should I wait or is there an issue with my setup? I checked the Mozilla sync server status and it listed no issues.

There was a server out last week. see below. now everything works great. thanks for the follow up.
To:
Subject: [Bug 744289] sync107.db.scl3 down
Do not reply to this email. You can add comments to this bug at
https://bugzilla.mozilla.org/show_bug.cgi?id=744289
Gregory Szorc [:gps] <[email protected]> changed:
          What    |Removed                     |Added
            Status|UNCONFIRMED                 |RESOLVED
        Resolution|                            |FIXED
           Summary|error in sync               |sync107.db.scl3 down
     Last Resolved|                            |2012-04-10 19:39:11
--- Comment #2 from Gregory Szorc [:gps] <[email protected]> 2012-04-10
19:39:11 PDT --- Well, this is embarrassing. It looks like one of our
servers was down and for whatever reason we didn't notice.
It should be working now. If you still see errors, please reopen this bug.
Configure bugmail: https://bugzilla.mozilla.org/userprefs.cgi?tab=email
------- You are receiving this mail because: ------- You reported the bug.

I have a sync account and used to keep sync with firefox server. Now computer got re-installed and want to sync data from firefox sync server. But I am unable to setup as i dont have sync key.

I have a sync account and used to keep sync with Firefox server. Now computer got re-installed(OS) and want to sync data from Firefox sync server. But I am unable to setup as i don't have sync key.
I would like to just sync with Firefox Sync Server with existing account. I can not find any way out for this. please reply me on
[email protected]

hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

VPN Connected but can not see folders / server

I have established a connection between an OSX server and client but now can not see the server or any services on the client. There are no servers listed in the 'Network' section of finder and using 'Connect to server' I can not see it either. The log on the server shows the connection and the client does as well but other than that I can not do anything with the connection.
Details
- Using 10.6 osx server and a 10.6 client.
- Connected via VPN, L2TP
Thanks,
Brian

I have connected to VPN but can't see anything on my finder or desktop.
I tried connecting to server by doing command+K and entered the ip address like afp://ipaddress/user
doesn't work. I get error message saying:
Connection Failed
The server "165.124.164.125" is available on your computer. Access the volumes and files locally.
help!!

Firefox/Safari can't find the server at...

The last couple of weeks for some strange reason I have received this message: "Firefox/Safari can't find the server at..." about half the times I try to connect with the internet. There doesn't seen to be a particular type of site that this affects. Many of them are among my bookmarks. Always when I try again immediately I still can't get in. But half an hour later sometimes I can access the site without problems. I could understand it if these were high volume sites accessed at peak times, but this is not the case. My settings haven't changed and I haven't downloaded (as far as I know) any file that could cause this. I had a virus checker and it didn't find anything. Could anyone give me an idea what's going on??
Thanks,
Chris

I was having this problem after updating to firefox 4.0. Error loading page and/or some pages wouldn't load completely. After trying everything I could find in Support, various other forums and talking with Apple Support with no success, I called my ISP. They rebooted my modem from there end and Voila! Firefox and Safari are working normally again.

What is the Firefox Sync server address?

Hi, I´m trying to sync my ReminderFox app from 2 computers, but I would need my Firefox sync server address, and don´t know where to find it :(. When setting up Firefox sync I just used the standard Firefox sync server, so I need that "standard" Firefox sync server address, so I could add my account name to it. Please help! Thanks a lot!Sonia

Hi wickedboy,
I am assuming you want to do this: http://reminderfox.mozdev.org/faq.html#s6
You cannot use the Firefox Sync servers to do this. Sync works with a custom protocol (https://wiki.mozilla.org/Labs/Weave/Sync/1.0/API) and can't be used to store files such as ICS files from ReminderFox.
Instead, I'd do as that FAQ recommends and use a free iCal server, such as [http://icalx.com iCal Exchange]

When i open firefox i can only see the left side of the website but the left hand side of the website is on the right side of the screen

it was working fine before and then 1 day i loaded firefox and now i can only see 1 side unless i i use full screen mode, please can any1 help me
it looks like the left hand margin is way to big but i hav already looked at this and it is not the problem, and ive tried zooming in and out aswell and reseting the zoom ect

Hi - I think this is related to the Babylon Toolbar
Right Click on the toolbar in the grey area this is at top of the screen - If the Babylon Toolbar is ticked deselect it and all becomes well.
Cityjet

Firefox 21 Can't see Norton 360 V20.3.1.22 Toolbar

After installing the latest version of Norton 360, Firefox can't see the Norton Toolbar. I reinstalled Norton 360 and upgraded Firefox to version 21. LiveUpdate says it downloaded the Norton 360 Toolbar Add-On.
I've tried the steps for corrupted extension files, but that didn't help. I've been working with Norton
tech support via their message boards, and none of their suggested fixes has helped. Since the Norton 360 Toolbar Add-On was downloaded by LiveUpdate after I reinstalled Norton 360, it appears that the
problem is with Firefox 21. How do I fix this?

hello, according to norton, you need version 2013.3.5.1 of the toolbar which is compatible with firefox 21. please run the norton liveupdate repeatedly & until all components are up-to-date. in addition make sure that the toolbar is enabled under ''firefox > addons > extension'' afterwards.
for more information refer to https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-21-Support-for-Norton-Toolbar/td-p/957507

When I try to lounch Firefox I can not see it on my screen, but it works in a background

Usual it happens after the windows is working for an our or more (not from the start). No matter if I try to activate it from the shortcut from the desktop or from program files list from HD. I know that it is opened in background because, when I shutdown the computer it asked me shall I keep the tabs etc....
If I tried to open it several times it opens every time but I just can not see it (not even in the Taskbar).

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Can't see Exchange Server after installation

I know it must be simple, but after installation of Exchange Server 2013 on Server 2012 R2 and getting the "successful" installation message, I can't find the server. It was not problem on Server 2008 and Exchange 2010.
Any ideas as to where I should go to look for Exchange? I can't even setup mailboxes???!!!
I really am lost on this one.

Hello,
In addition to above: make sure that Exchange 2013 is installed correctly. Check Exchange installation logs and run the Get-ExchangeServer command using Exchange Management Shell on the new server. You should see both Exchange 2010 and Exchange 2013 servers.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

Can anyone suggest why Dev Studio can't see the server engine

We have NW2004s/SP08 installed. The server J2EE engine runs fine and one can log into the server and succssfully deploy jar's directly to it.
We also have Dev Studio installed on a desktop and it works fine. We have our J2EE preferences set using the actual IP address of the server J2EE engine and port number 3061. (We can ping this IP address successfully.)
When we try to do a Deploy/Run from Dev Studio and monitor this attempt on the server side, we can see Dev Studio trying to connect.
But it doesn't connect. In Dev Studio, we just get a message saying "sdmhost empty or unknown".
What's missing in our config? It was set up for us by externals no longer here. Since we can successfully ping the IP of the server from the PC, and since we can see DevStudio trying to connect, it can't be a network connectivity problem.
Thanks for any suggestions as to where to look/what to do.

Pascal -
I am indebted to you for your kindness in taking the time to answer such a trivial question.
I assume that because the client is now asking me for the SDM password, your solution is correct. (It didn't ask me for a password before - I just got the error message.)
So I've tagged your reply for 10, even though I don't know the password so can't completely confirm yet.
I'll cycle back and confirm once I have the password.
Thanks very much again.
Dave

Can't see BlazeDS server side log

Hi,
I'm running JBoss 5 EAP and BlazeDS 3. I don't see any server side log for BlazeDS even though I followed BlazeDS documentation. Following is the logging section in my services-config.xml:
    <logging>
        <target class="flex.messaging.log.ServletLogTarget" level="All">
            <properties>
                <prefix>[BlazeDS]</prefix>
                <includeDate>true</includeDate>
                <includeTime>true</includeTime>
                <includeLevel>true</includeLevel>
                <includeCategory>true</includeCategory>
            </properties>
            <filters>
                <pattern>Endpoint.*</pattern>
                <pattern>Message.*</pattern>
                <pattern>Service.*</pattern>
                <pattern>Configuration</pattern>
            </filters>
        </target>
    </logging>
According to the documentation, I should see log entries for BlazeDS in JBoss server log. But I didn't. Can anyone help me out with this issue?
Thanks.

Sorry, just as an addedum, I can connect through a hard connection, but I can't access Screen Sharing

Can't see SLES server joined to domain

Hi all: I am a domain membership on SLES newbee and I need some help with getting an SLES server working properly with our domain. The server I need help with was recently rebuilt from OES 11 to SLES 11 due to zenworks incompatibility. I still need to be able to access this server's storage over the network. When I browse the network from my Windows 7 computer the server does not show up and I cannot reach the server via \\servername. The server is in our DNS database.
So I joined the server to our domain successfully. I used the newer style domain notation rather than windows 2000/NT notation. I can see the server in now a member of the domain by looking at the domain members on one of our DCs. I have not enabled any other features such as "Also use SMB information for Linux Authentication" and "All users to share their directories". NTP is configured and operating. The server does verify that it is a domain member. Under Samba configuration I have set the domain using the older style domain notation. It is not a DC controller. I have also set the NETBIOS name.
I would appreciate some help understanding what I did wrong and what I need to do to correct this. BTW, I tried this once before on a test server and it worked well. Not sure what I did different.
Thanks for the help, Chris.

DSfW does not apply as you pointed out, and I don't believe I was referencing that component. I need this SLES 11 SP3 server to be visible to some of my users. I want to share a directory named "storage" and I need it so that they can authenticate via AD rather than adding all these users as onto the SLES box. My users also need to be able to browse to the server using Windows Explorer or get to it via \\server.
So in YAST2 I can set up samba but I can also join the domain. This is where I am getting confused and setting something incorrectly.
>>> Simon Flood<[email protected]> 8/28/2014 8:32 AM >>>
On 28/08/2014 13:02, cmosentine wrote:
> Hi all: I am a domain membership on SLES newbee and I need some help
> with getting an SLES server working properly with our domain. The
> server I need help with was recently rebuilt from OES 11 to SLES 11 due
> to zenworks incompatibility. I still need to be able to access this
> server's storage over the network. When I browse the network from my
> Windows 7 computer the server does not show up and I cannot reach the
> server via \\servername <file://\\servername>. The server is in our DNS
> database.
>
> So I joined the server to our domain successfully. I used the newer
> style domain notation rather than windows 2000/NT notation. I can see
> the server in now a member of the domain by looking at the domain
> members on one of our DCs. I have not enabled any other features such
> as "Also use SMB information for Linux Authentication" and "All users to
> share their directories". NTP is configured and operating. The server
> does verify that it is a domain member. Under Samba configuration I
> have set the domain using the older style domain notation. It is not a
> DC controller. I have also set the NETBIOS name.
>
> I would appreciate some help understanding what I did wrong and what I
> need to do to correct this. BTW, I tried this once before on a test
> server and it worked well. Not sure what I did different.
Reading the above am I right in thinking that your server is not running
OES11 but instead "regular" SLES11? If so, where does Domain Services
for Windows (a component of OES11) fit in to the above?
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

How many users are registered for using the firefox sync server?

I'm working on a german wikipedia article about "Firefox Sync" and I need more information about the current usage and the historical development of this feature - number of registered users for the Sync Server at Mozilla - would be nice to have numbers for 2011, 2012, and current usage.
If possible, it would be also useful to know how many german speaking users are using the sync service.
Where are your Sync Servers located (US, Europe, Asia)?
What kind of systems and platforms are supported?
Is there a current documentation about the importance of the Firefox Sync Service, that I may reference?

thanks for your fast reply,
your URL to the page with the ideas of the new PiCL service shows in the remark about the usability of the "Firefox Sync" some hints about the usage of the current sync service "only 1% of our users have actually done so" - so I will use that as reference.
But it would be nicer to have some public message - for example: a mozilla blog entry - from the mozilla services group about the number of registered Sync Server User - and also about performance and reliabilty.
But if that is private information only, you can close this problem.

Firefox Sync can't setup; can't see sync server

Similar Messages

Maybe you are looking for