Firefox Sync cannot connect to server

Firefox Desktop 12.0 on Win7 HP 64bit
Firefox Mobile 14.0 on Android 4.0.3 (didn't work on 2.3.6 either)
Hello,
I'm trying to set up Sync between my Firefox Mobile and Desktop. On the mobile, I tap on "Sync" and get the three alphanumerical codes. I enter them on my desktop Firefox, the both browsers communicate with the server. The desktop browser says "Device connected" and the mobile browser says "Firefox Sync could not connect to server".
What else can I try?
Greetings, Jost

Do you have Firefox mobile Aurora or Nightly builds installed and Syncing? The rewrite as a Android Service resulted in Sync only working with one instance of Firefox at a time.

Similar Messages

  • Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

    Hello, everyone, my name is rafl
    I have a problem with exchange 2013 active sync.
    I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
    but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
    (legacy.domain.com)
    the process of moving mailboxes successfully without error.
    Access OWA for exchange 2007 and exchange 2013 is running normally
    access mail from Outlook running normally
    Certificate request has been installed and has no problem with it
    The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
    The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
    ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
    user mailboxes are still on exchange 2007 is not problematic.
    only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
    but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
    only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
    any ideas for this problem, and what should I check on the exchange server ..?

    i have run the activesync test connectivity and get some error :
    Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 3091 ms.
    Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21072 ms.
    Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21049 ms.
    I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
    for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

  • Firefox cannot connect to server:IE can:DNS pref tried: cure?

    Firefox error page displays on startup, 'cannot connect to server'. Tried uninstall/reinstall. Tried various start pages. IE works perfectly.

    This happens for all web sites?? This troubleshooting article has a number of suggestions. Hopefully one of them will fix it.
    [https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can Firefox cannot load websites but other programs can | Troubleshooting | Firefox Help]

  • I can't sync Exchange with my iphone 5. It keeps telling me "Cannot connect to server"

    I can't sync Exchange with my iphone 5. It keeps telling me "Cannot connect to server"

    Contact your IT professional.  You're entering a setting incorrectly.

  • TS1398 iTunes , cannot connect to server. At both, my fathers and at my place, with both, his iPad1 and my iPad 3

    Started out with "Text Plus" triple charging me. Gave up on them.  iTunes sent me an email with the receipt of all 3 charges with "report a problem"  under each purchase. I clicked on it and that's when I had on my screen "cannot connect to server". This happens with both my iPodtouch 4 th gen. & my new iPad3 , both are WiFi. This also happens at my place and my fathers, with my products and the iPad 1 WiFi I gave to him. I can get on my iTunes but can't buy anything. I can sync . Please someone help, Sue

    I just now did what you said and now it says; iTunes, cannot connect to iTunes store.
    Very puzzling indeed, I contacted iTunes the other day and Derrick told me to go to Apple , I did and they said their support community has dealt with this problem before and now I am here. I think I am going to sync my iPad with iTunes for the 8th time and see if that does anything, it's been about 24 hrs. Since I did it last. Thank you for your help,Sue

  • Mail cannot connect to server

    Mail isn't connecting to server

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom 

  • When I hit the e-mail icon on iPad air I always get "cannot connect to server".

    However, in a couple of seconds the e-mails load up just fine. It seems as though the iPad is not waiting long enough for the server before giving the "cannot connect" message. Is there a fix for this?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • MacBook Pro, iPad IV and iPhone 4S Cannot Connect to Server

    I have a MacBook Pro running Mountain Lion 10.8.5, and an iPad IV, both less than three months old. I also have a pair of iPhone 4s's.
    All of a sudden none of them can reliably connect to our AT&T Wireless home internet. There are particular websites we are blocked from viewing, notably any apple website, including apple.com, apple support, itunes, and App store, but also random ones like Wikipedia and others. We constantly get the "cannot connect to server" message. Yet other websites load right up with no problem.
    Many  websites are seriously snarled up, particularly Ebay, which is a critical one for me to have quick access to. Ebay screens are scrambled and out of order, act like purchases are being made when they're not, and photos don't show. All we get is little blue questionmarks.
    Multiple  PCs running on our home network work just fine, and we can get into any website with them. But ANY apple product is just stymied. We can turn off wifi on the phones, and get into websites with 3g, but as soon as the wife is turned back on, we're back to square one.
    Nothing has changed on our network recently, although we did get a new router about three months ago after having consistent outages. I have noticed our wifi getting glitchier and slower as time goes by,  but again, it affects the Apple products, until it just went totally haywire last week.
    My husband gets wifi at work just fine, and I am accessing wifi quickly and accurately on the MBP at this very moment on a museum network.
    The issue seems to be the AT&T home network, and very specifically with the full line of Apple products.
    Any clean and easy suggestions? I don't want to have to jump through hoops on four different products, and I now suspect it's something to do with AT&T?

    Pleeeeeeease. Somebody? Anybody?
         I can't get into Facebook, or Ebay on my MacBook. Life is too short to weep and lose hair over computers. Surely there's a quick fix I just haven't thought of?

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

  • Error message "cannot connect to server"

    Often I get an error message "cannot connect to server" when
    I want to connect to acrobat.com directly from a .pdf document in
    order to upload it . Is it possible that there is some security
    issue involved, e.g. that the document is protected somehow? Or
    could browser or firewall settings be involved?

    Hi Peterernst,
    Thanks for posting.
    Perhaps yes, firewall, and browser popup blockers have been
    known to cause some behavioral, and connectivity issues within
    Acrobat.com
    Users have had success with allowing *.acrobat.com as a
    trusted site locally, to see if that allows connectivity.
    Also what browser, and OS are you using?
    If still in the Unix environment, do you have access to a
    Windows, or Mac environment?
    Thanks!
    Pete

  • HP ENVY 4500 Printer "Error. Cannot connect to Server"

    Hey everybody,
    I work in IT and have a client that recently purchased a HP Envy 4500 all-in-one. She called me to install it for her and I got it set up with no problems. After a few days she told me that her printer wouldn't scan. It was giving her this error message;
    "Error. Cannot connect to Server. Check Server name and address."
    She has this computer connected via USB and I have already reinstalled the driver and ran the HP Print and Scan Doctor with no success. I have tried a lot of other solutions that people have been posting with the same issue but none have worked. This has become a huge issue and I don't see HP trying to find a solution. If no soultion will fix this, then I will be returning this printer for her and getting something that works.
    Any help would be greatly appreciated,
    bbritt91

    Hi bbritt91,
    Welcome to the HP Support Forums. I understand that you are getting a connection error message when trying to use the scan to email feature of your Envy 4500 printer.
    To be able to use the scan to email feature the printer must be setup with web services which requires the printer to be connected to your wireless network with an active internet connection. I have included the Getting Started with ePrint document for reference.  
    If the printer has been setup with a wireless connection, please set a manual IP address and manual DNS server for the printer. I have included a link to another post with the steps, including screen shots, on how to do this. Please don’t worry that the screen shots are for a Photosmart 7510, the steps are the same.
    Please let me know how it goes.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • "Cannot connect to server" error when setting up MAMP local server in Dreamweaver cc 2014

    I am trying to set up my Wordpress 4.1 site with MAMP 3.0.7.3 in Dreamweaver cc 2014, but I am getting a "Cannot connect to server" error when trying to view the site live. The site works fine on the localhost:8888. I am using OS X Yosemite and PHP 5.6.2. Below are screenshots of my Dreamweaver settings. Thanks in advance.

    Hi Subhadeep!
    Think I'm getting closer (Lol). I did as you suggested and changed the web url to http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings.
    http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings. Thank you!

  • I get the error messages: "Server not found" or "Cannot connect to Server" and thus cannot print. I don't even know what a server is.

    Hello: I am not computer savvy.
    I have run "Network Diagnostics" and the message "Cannot connect to Server" comes up. I can connect to the internet. I have tried turning off the whole system and the printer individually and nothing seems to change the message.

    hello,
    i got the same issue i'm using kde the link abe for "Adding a login manager (KDM, GDM, or XDM) to automatically boot on startup" guide is dead
    arkham wrote:Have you tried the inittab approach for starting kdm? http://wiki.archlinux.org/index.php/Add … tab_Method
    could you help me please ?
    Thank you
    Last edited by hael (2012-05-05 08:57:44)

  • When I want to create a pdf from a webpage I get:"cannot connect to server" why?

    when I want to create a pdf from a webpage I get:"cannot connect to server" why?

    Did you set you Preference im the right way? See
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS533B928E-576F-4dc3-AA14-73D08EEE8F20.w.h tml
    the newer link leeds to https://helpx.adobe.com/acrobat/topics.html .
    You could use the German link too:
    http://help.adobe.com/de_DE/acrobat/using/WSa65464b4e07c3e0a781ee72f1298fed479c-7ffe.html
    Hans-Günter

Maybe you are looking for

  • JDBC for Oracle 8.1.5

    Hello Guys, I have oracle 8.1.5 with java 1.2.2. But, the problem is that i cann't connect to oracle through jdbc. Problem is that it cann't create the jdbc. Can any one help me?

  • Every time a passivate/activate!

    I've noticed some unexpected behaviour of stateful session EJBs in a           WL6.0 cluster. Trace lines in the lifecycle methods reveal that when the           ejb is first invoked the following sequence occurs (without any           intervening ti

  • Plotting multiple graphs on one waveform chart with dynamic data types

    I'm trying to put multiple graphs on one waveform chart and having data agreement errors. I'm wondering if it has anything to do with the fact that dynamic data is being used (I've had no problems with other datatypes in the past). Does anyone know h

  • I'm a singer wondering if it's possible to change the key to a backing? Eg. a key convertor?

    I'm a singer wondering if it's possible to change the key to a backing (song)?  Eg. A key convertor?

  • Static again,......

    I have this interface interface AttachmentServiceIF extends Remote {    public abstract DataHandler getAttachment(String name) throws SOAPException; }and this method inside another class which implements that interface public DataHandler getAttachmen