Firefox takes over one minute to start. Tooooooo long

How can I get firefox to start up in less than 60-80 seconds

Firefox takes a long time to start up
https://support.mozilla.com/en-US/kb/firefox-takes-long-time-start-up
Check and tell if its working.

Similar Messages

JDeveloper 11.1.1.7 takes over 45 minutes to start

Hi,
I have windows 7 64 bit with 64 bit JDK 1.7. My jDeveloper 11.1.1.7 takes over 45 minutes to start, even the previous versions took similar long time. I have McAfee running on my system and have 8 GB RAM and more than 100 GB HDD on my C drive. I tried playing with the tuning parameters as mentioned in few blogs, but nothing seems to help.
Please help.
Avinash
Edited by: user773889 on 26-Apr-2013 00:58

Indeed, McAfee caches what it has previously scanned. I've had different versions of McAfee where this has been, and hasen't been a problem.
It's pretty easy to tell on Windows if McAfee is the culprit. Open the Task Manager and watch is McAfee active (consuming CPU) during the whole process of opening JDev.
If so you're going to have to work with your IT department to get exemptions for JDev put in place if it is.
CM.

WebAccess takes over 5 minutes to start servicing

Everytime the GW8 Linux server is reboot, WebAccess would take over 5 minutes to begin its service.
Further examining the logs found this on /var/log/apache/error_log when the server starts running after a reboot:
[Wed Jul 23 09:56:32 2014] [error] (111)Connection refused: proxy: AJP: attempt
to connect to 127.0.0.1:8009 (localhost) failed
[Wed Jul 23 09:56:32 2014] [error] ap_proxy_connect_backend disabling worker for
(localhost)
[Wed Jul 23 09:56:32 2014] [error] proxy: AJP: failed to make connection to back
end: localhost
[Wed Jul 23 09:56:33 2014] [error] proxy: AJP: disabled connection for (localhos
t)
The above pattern keeps repeating everytime a connection comes... and automagically disappears after a while... WebAccess then starts running...
Any clues???

In article <[email protected]>, Glio wrote:
> Everytime the GW8 Linux server is reboot, WebAccess would take over 5
> minutes to begin its service.
> /var/log/apache/error_log ... after a reboot:
> [Wed Jul 23 09:56:32 2014] [error] (111)Connection refused: proxy: AJP:
> attempt to connect to 127.0.0.1:8009 (localhost) failed
> [Wed Jul 23 09:56:32 2014] [error] ap_proxy_connect_backend disabling
> worker for (localhost)
This is an apache issue where part of it is looking for its proxy engine.
What distro/version of distro are you running? Is this an OES box?
Is anything else using that port? (Possible conflict)
netstat --listen | grep 8009
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

After update, iTunes takes over 30 minutes to start up

I updated iTunes to 10.6.3.25 a couple of days ago to the latest version, and now it takes over 30 minutes to load. I click the iTunes icon on my desktop and get the mouse spinner for about 2 seconds, then it disappears. During that time, I can see in task manager that iTunes.exe using the about 25% of my CPU (i3 550) and over 100,000k of my 8GB of RAM. After it finally loads, I plug in my iPod and iTunes gives no indication that it sees it at all. Windows sees it, but iTunes doesn't. My question is, what can I do to fix this? I've already went into programs & features and went to changes and hit repair on each of the apple programs I have on my computer and that changed nothing, and I also tried this.
tl;dr iTunes takes forever to load and iPod doesn't show up in iTunes

UPDATE: After having had my iPod plugged in for TWO HOURS, it has finally been detected by iTunes.

Retina MBP takes over a minute to start up

Just received my rMBP over a week ago and started to notice slow boot up times of over a minute ehich seems too long for an rMBP with flash architecture.
I've already tried the following:
Removed all unwanted login items
Chose correct drive in Startup Disc
Reset PRAM and SMC
Reinstalled ML(not a clean install)
My shutdowns are quick(2-10sec range) but can't figure out what's causing the sloooow start up. After pressing the power button and get the gray screen and Apple logo, the spinning wheel shows up. I timed it at about 1min 5sec until the wallpaper and menus show up.
What is causing this and is there a way to get the super quick start up times other people are getting without having to do a clean install of ML?

No external devices connected to my rMBP.
@Shooitst007: I ordered 16gb of RAM so it had to be custom made and sent to me from China. I don't really want to wait another 2-3 weeks to get a new rMBP. Plus I bought Apple Care just in case. My last option before turning it in to Apple would be to wipe the SSD and do a clean install of ML.

Firefox 27.0.1 takes over 10 minutes to start !

And when it does start, it's unbearably slow !
Firefox seems to monopolize the disk per the access LED on the front of the Dell
this on a Dell b120 laptop, 1.5g memory, win xp sp3
This just started yesterday with 27.0.1
tried 27.0.0 & 26 - neither helped
tried disabling the plugins, no help
tried running junkware removal tool, no help
tried adding more memory, to a total of 1.5 g from 1g, no help
safe mode, no help
didn't try a reset because it takes so long to get firefox to start
For now I'm using Chrome (IE8 also works) but would prefer Firefox.
BTW, almost nothing else can be done while Firefox is starting/running
so usually end up killing the firefox process with a ctrl-alt-del

Start you computer in safe mode. Then see how long it takes for
Firefox to load.

IMac takes over 5 minutes to start from power off

processor 2.5 ghz core i5, 4 gb 13333 mhz ddr3.
when the computer is turned off it takes a long time for the apple logo to start when i power on. version is 10.9.4

Boot up in Verbose Mode, Cmd-V at the startup chime. Verbose mode will show you the entire boot process as it's happening. Look for where it's hanging up. Might have a camera ready for this as you won't be able to do a screenshot.
Another thing to try is to open Console Utility, in Utilities, go to System Log and enter "BOOT_TIME" no quotes in the filter field(string matching). Note the time, then clear the filter field (string matching) and go to that time in the log, note the time stamps of everything after to see where there are unusually long entries.
Note, if the system log has been cleared, you might not see the latest boot up. There are archives of previous ones in /var/log, also in Console. Scroll all the way down to see those.

Dashboard takes over a minute to start

I don't use DB much, and only have a few widgets, but when it starts, it takes TOO long to get going. I only have the default weather and a shipping tracker for internet connections.
And of course nothing else works until all is updated.
Ideas?

Try some basic repairs and see if that helps.
Use Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
 DALE

My new iMac 27" 3.2GHz takes over 5 minutes to start up

I have restored Mavericks and migrated my apps and data from a Time Machine backup. once it starts it seems to go OK but the number of messages in console is frightening. Could it be a hardware fault?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Once my iMac and Macbook Pro go to sleep and I start them it takes about one minute to connect to my wi-fi is there a setting change that would connect me immediately?

When my iMac, Macbook Pro, iPad and iPhone go to sleep it takes about one minute to connect to my wi-fi when they are awakened, is there a setting that will keep my wi-fi connected at all times?

http://www.macworld.co.uk/news/mac-software/mac-os-x-yosemite-wifi-airdrop-fix-u pdate-new-features-bugs-uk-video-10-10-2-3493748/
"Here's everything you need to know about Mac OS X Yosemite and the WiFi issues that are plaguing users, including a possible fix. Plus discover the new features that have arrived with OS X 10.10 and the fixes that arrived 10.10.2."
That fix was supposed to resolve the WiFi problems.

Firefox takes over windows hotkeys (Fn + Volume Up)

Firefox takes over windows hotkeys (Fn + Volume Up). I am used to adjusting global volume control (windows mixer) from my keyboard, but firefox takes over Fn + ... hotkeys so they don't work in firefox windows. How to disable this feature in firefox?
Thanks

This is still a problem and a very annoying one!! With the newer versions of adobe flash (currently here 11.5.502.135) I cannot change volume with Fn+F keys after pressing anywhere on my firefox window. First I have to unfocus my firefox window and only then I can change volume. This problem doesn't occur in flash player 10.3 for example.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Opening an Excel file takes over a minute

Anyone else notice that it takes forever to open an Excel file? I know Numbers has to import it, but it takes over a minute on a Mac Pro?
I really don't want to install Excel on my machine.

Bryan,
How large is the file? If you will be frequently opening and working with large Excel files, you may as well accept that you need Office or NeoOffice or OpenOffice on your Mac. Many of us came to Numbers to escape the grip of MS, but you have to do what makes the most sense. Remember that you can still use Numbers for non-collaborative work.
Jerry

Mac book now takes about 10 minutes to start up and all applications "unexpectedly quit" every time before they've opened. What did I do???

Mac book takes about 10 minutes to start up and all applications "unexpectedly quit" even before they open. What did I do???

are you using sample base instruments in those projects a lot using exs or kontakt? when paths to samples get messed up for some reason it can result in along waiting times each time a project is loaded.
lately my kontakt samples get loaded without any sign of activity. if it is a large orchestral score i see a dead screen for quite a while before suddenly everything pops up and is ready to work with. i recall seeing progress bars or similar things in the past though...
repair permissions and defragging (idefrag) may help as well.
btw. i can drink as much coffee as i want late at night, even five minutes later i can sleep well. seems i am immune. but right now i am also having plenty of hardware issues to deal with so that's a good thing i guess...!

FCP takes 15-20 minutes to start, once it's loaded plug-ins

Once plug-ins are loaded and RT bits are done, FCP 7 takes 15-20 minutes to start. I've closed projects, I've deleted preferences, repaired disk permissions but still no joy.
Activity Utility suggests that FCP is looking for a previous files assets.
Had anyone else experienced this?
Many thanks

By default, FCP will try to load the last project that was active.
While 15-20 minutes is a long time to try loading even a missing project and it's media, you might try turning this option off. Click in the menu bar where you see *Final Cut Pro* in bold typeface.
Go to User Preferences.
De-select the option "Open last project on application launch" in the General tab.
Post back with your results.
Message was edited by: Nick Holmes. Apparently, I no longer speak English....

Firefox takes over one minute to start. Tooooooo long

Similar Messages

Maybe you are looking for