Firefox up to date, but everything tells me to update.

ive updated firefox over and over, and its up to 32.0.3 right now but whenever i go to a website it tells me im using a older version of firefox and to update. also like the themes add on wont work because of this. ive uninstalled and downloaded again but still nothing. i even downloaded an older version then upgraded that and still nothing. the themes keep telling me to update to 30.0.16 or something close to that. imma try and download a Canada version and see if that could work. please help. :)

Your useragent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/'''3.0.19''' (.NET CLR 3.5.30729) '''FBSMTWB'''
It was likely the FBSMTWB that was added to UA that frozed it at 3.0.19. The FBSMTWB is related to the Fast Browser Search toolbar extension you had installed in Firefox at time.
Firefox since '''4.0''' version does not allow anything to be added to UA ever since.

Similar Messages

  • My iphone is stuck,  it says connect to itunes, and when I aconnect it to my pc, my pc says restore data but everything will be erased and I don't wanna lose everything. please help me

    my iphone is stuck,  it says connect to itunes, and when I aconnect it to my pc, my pc says restore data but everything will be erased and I don't wanna lose everything. please help me

    If you have a graphic of iTunes and a cable displayed on your iDevice then it is in Recovery mode.
    Check this to try an "exit"
    http://osxdaily.com/2011/01/08/iphone-recovery-mode/

  • HT1338 Adobe Flashplayer is out of date but I am having trouble updating it

    Adobe flash player is out of date and I cannot seem to update it

    Which version of OS X are you running?
    You posted in the Mountain Lion forum and your profile says 10.6.2.
    Allan

  • When downloading/uploading any file with Firefox, Finder shows date but not time

    On my iMac, as I either upload or download a file using Firefox after installing Lion, the Finder window that opens for me to tell it where to either download the file to or upload it from, shows dates of all the existing docs there, but not the time. How can I make it show the time as well?

    I have found the problem.
    A download manager had been installed for a specific website and it was butting in all the time. Even after removing it with 'Add or remove software' it still had its hooks into the system and it was impossible to download anything as it now would not run.
    Had to do an XP 'System restore' before I could get rid of it.
    The offending program was MD_setup.exe size 3,045KB from the themediadownloader.com

  • Dynamic context, ALV, no data - but everything seems to be in place!

    I've created a component for displaying data in an ALV, with the intention of using it in other components.
    The component controller has two methods:
    SET_DATA_STRUCTURE (parameter I_attributes IMPORTING type WDR_CONTEXT_ATTR_INFO_MAP).
    SET_CONTENTS (parameter i_reference_contents IMPORTING type ref to data).
    The both trigger similarly named events which are reacted to by the view controller.
    The handler for the data structure is this:
       data root_info type ref to if_wd_context_node_info.
       root_info = wd_context->get_node_info( ).
       data data_node type ref to if_wd_context_node_info.
       data_node = root_info->add_new_child_node( name = 'DATA'
                                      is_initialize_lead_selection = abap_false
                                      is_static = abap_false
                                      is_multiple = abap_true
                                      attributes = i_structure ).
    The handler for set_contents sets the view attribute reference_to_contents.
    The WDDOMODIFYVIEW method handles the contents (only when there is new data).
         data lo_nd_table_contents type ref to if_wd_context_node.
         lo_nd_table_contents = wd_context->get_child_node( name = 'DATA' ).
         field-symbols <table_contents> type any table.
         assign wd_this->reference_to_contents->* to <table_contents>.
         if <table_contents> is assigned.
           lo_nd_table_contents->bind_table( new_items = <table_contents> set_initial_elements = abap_true ).
         endif.
         data lo_interfacecontroller type ref to iwci_salv_wd_table .
         lo_interfacecontroller =   wd_this->wd_cpifc_alv( ).
         lo_interfacecontroller->set_data( r_node_data = lo_nd_table_contents ).
         wd_this->new_contents = abap_false.
    When I test my application, I can see inthe debugger that the context is correctly created and populated. The data is bound correctly to the context. But no data is displayed in the grid.
    I've looked through the various tutorials, and can't see what I've missed.
    I've instantiated the usage in WDOINIT of the view. I've embedded the control in the window. Every step checks out - but still no data is seen. I've tried the refresh method on the interface controller of the usage - nothing.
    I've just checked, and the field order and field names of the data being sent in reference_to_contents are identical to that in i_attributes.

    Well, I tried it, and a few other things based on it, and it appears you have the solution.
    My code is:
       DATA root_info TYPE REF TO if_wd_context_node_info.
       root_info = wd_context->get_node_info( ).
       " Convert attributes to RTTI entries
       DATA attribute TYPE wdr_context_attribute_info.
       LOOP AT i_structure INTO attribute.
         DATA components TYPE cl_abap_structdescr=>component_table.
         DATA component  TYPE abap_componentdescr.
         DATA type       TYPE REF TO cl_abap_datadescr.
         CLEAR component.
         component-name = attribute-name.
         component-type ?= cl_abap_typedescr=>describe_by_name( attribute-type_name ).
         INSERT component INTO TABLE components.
       ENDLOOP.
      " Create the new context, starting at TABLE DATA with attributes as in "components"
       root_info->add_new_child_node(
                                      name = 'DATA'
                                      is_initialize_lead_selection = abap_false
                                      is_static = abap_false
                                      static_element_rtti = cl_abap_structdescr=>create( components ) ).
    (I'm in a 7.3 system, so I get to use chaining of methods!)

  • Trying to play rented movie off itunes but it tells me to update quick time and i try to but quicktime tells me i got the latest version what should i do

    runnin windows xp with quicktime ver6.5 need better version to run a movie but quick time tells me its up to date what can i do

    with quicktime ver6.5
    Try updating to 7.7.2:
    http://www.apple.com/quicktime/download/

  • I want to download the latest version of firefox but don´t find the buttom where I do that. I question come up if I want to update firefox I went there but dont find where i update it

    I downlouded the extra material there it was buttoms but not the firefox uploading buttom I did not find. I have a mac.

    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • I bought an update for my macbook last time, i dont remember the date but if i want to update my software which i bought but i cannot?

    Hi there,
    I have bought an update of software form Mountain lion and i paid $20 for that then for some reasons i reinstalled my previous version fo software then now i need to update my software to OX lion 10.7 but online it is showing me $20 need to pay which i had paid the same amount before. so if some there to help me out that will be great. thank you so much.

    Well, so you purchased Mountain Lion and now you want to buy Lion (which is older than Mountain Lion)? If you simply want to install Mountain Lion, you should check your Purchases section in the app store - if you bought it, it should be there for you to download.

  • Software out of date, but won't update, Software out of date, but won't update

    My mac is running 10.4.11. I know it's out of date, but when I try software update, it says my software is up to date.  I'm assuming this is the reason I can't update my iTunes and thus also can not sync my iPhone to my iTunes.
    I saw another question similar and someone responded that you would need to PURCHASE the next update. Is that true? And if so, that's terrible. Please tell me there are downloads available for me so that I can update my operating system and then update my iTunes.

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    The DVD should look like this
    Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
    See Software update, upgrade--what's the difference?
    http://docs.info.apple.com/article.html?artnum=25811
     Cheers, Tom

  • Pacman says my system is up to date - but it's not

    Well that's the whole story - when i try to:
    sudo pacman -Syu
    i get:
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    local database is up to date
    but i haven't been updating for about 2 months. please help.

    i use these mirrors:
    # Servers used by my pacman
    # Russia:
    Server = ftp://mirror.yandex.ru/archlinux/$repo/os/x86_64
    # US:
    Server = ftp://ftp.archlinux.org/$repo/os/x86_64
    # Latvia
    Server = http://archlinux.goodsoft.lv/$repo/os/x86_64
    # Lithuania
    Server = ftp://atviras.lt/archmirror/$repo/os/x86_64
    Server = http://atviras.lt/archmirror/$repo/os/x86_64
    Server = ftp://mirrors.kernel.org/archlinux/$repo/os/x86_64
    just added last line - still nothing

  • Why does my mac book keep telling me that my flash is out of date but wont update?

    I have been getting a message that my flash is out of date but when i try to update i get the same message

    Uninstall Flash and then try again.
    Uninstall instructions
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    Latest version 12.0.0.70
    Remember to close all browsers and system preferences when installing Flash

  • After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

    after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

    Download 9.1 and 9.2.3 updates and install them

  • What is the Firefox start page looking for when it tells me I'm not using the most current version and need to update Firefox? The check for updates button says my version is up to date, but the start page disagrees. Is there a setting I need to adjust?

    Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?

    I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
    I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
    So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
    I hope this helps some people.

  • I can't update firefox. I have the 4 beta but when i click on update, it never finnishes to update. Everything goes well until i restart firefox and a window tells me: "conneting to update server". please help

    everything works well but FF asks me to update after a few hours everyday, as if i had not done it already. this has never happened before.

    Do the following please.
    Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. If necessary, download the file with IE8 and choose to save it to your desktop when you see the prompt.
    Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').
    Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
    Finally run the installation file you downloaded to the desktop earlier.
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • I have windows XP & uninstalled firefox & trying to reinstall but when I do it tells me to reboot my comp. to finish the uninstall I have done that a few times & still get the request . What can I do to reinstall it?

    I have windows XP & uninstalled firefox & trying to reinstall but when I do it tells me to reboot my comp. to finish the uninstall I have done that a few times & still get the request . What can I do to reinstall it?

    Do a clean (re)install:
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Maybe you are looking for