Firefox updated and now when I try to open up a web page, Firefox completely closes the browser. When I open it back up, it asks to restore the session. What happened???!!

When you bring up the browser and type in Church of God's Messengers, it brings up the links. When you click on the links, it closes Firefox completely. When you bring back up Firefox it asks you if you want to restore the session. I never used to have problems accessing the site. What happened???!!!

stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad?

Similar Messages

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]]

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

1)Copy this below from --{code} to --{code}
--{code}
set p2l to "" & (path to library folder from user domain)
set the_cache to p2l & "Caches:com.apple.iWork.fonts"
tell application "System Events"
          set maybe to exists disk item the_cache
          if maybe then delete disk item the_cache
end tell
if maybe then
          display dialog "I deleted the file :" & return & the_cache
else
          display dialog "The file :" & return & the_cache & return & "was unavailable !"
end if
--{code}
2) Than open Applescript Editor in your applications and paste it
3) Than select "Compile"
4) Than select "Run"

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I have never had problems in the past. Is this a real m

My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?

It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I backed up my iPhone to my computer before I did the ios 8 update and now when i go t restore it it tells me there isnt enough space on the iphone. I lost half of my pictures in my camera roll. Is there anyway i can get these back?

I backed up my iPhone to my computer before I did the ios 8 update and now when i go t restore it it tells me there isnt enough space on the iphone. I lost half of my pictures in my camera roll. Is there anyway i can get these back?

You did import these important photos over to an alternative storage medium, just like you would with any digital camera, right?

I have just had a system update a safari 5.1.7 a security update 2012-200 and a app update and now when i go into a site with flash it says i do not have adobe flash. I have installed it but still no luck? any help would be much appreciated Cheers Dave

I have just had a system update. Safari 5.1.7, a security update 2012-200 and Remote app update and now when I go into a site with flash it says I do not have adobe flash. I have installed it from the site but still no luck? any help would be much appreciated Cheers Dave

Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
WebKit built-in PDF

I updated the IPAD with the latest update and now when I turned on and I get the Itunes log and nothing elser

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

Hi ....
"I get the itunes logo and then nothing else"
Use Recovery Mode > If you can't update or restore your iPhone, iPad, or iPod touch

I have just downloaded the latest "Office" update, and now my xls files only open in "Numbers". Can this be fixed?

I have just downloaded the latest "Office" update, and now my xls files only open in "Numbers". Can this be fixed?

You can try right clicking on one of your xls files select get info then select open with, select other then choose office excel and check the box to say always open this file type.
Hope this helps

My husband plugged my iPhone into his computer, created an account and now when I want to add apps it asks for his password not mine. How do I get my account back? Tried plugging it into his computer again. No prompt to change account back to mine.

My husband plugged my iPhone into his computer, created an account and now when I want to add apps it asks for his password not mine. How do I get my account back? Tried plugging it into his computer again. No prompt to change account back to mine.

Hi Trishw,
At the top of the iTunes Store window, you will see who is logged into iTunes. I'm guessing from your description, that it is your husband. If it is, click on the name to display the dropdown, log him out and sign yourself back in:\
Cheers,
GB

When I try to open a video, or farmville I get "blocked plug-in", what happened?, when I try to open a video, or farmville I get "blocked plug-in", what happened?

when I try to open a video, or farmville I get "blocked plug-in", what happened?

Hi maryd94928647,
Could you please specify more on the same.
Where exactly are you signing in?
What kind of video are you trying to open?
Let me know.
Regards,
Anubha

Safari 5.1.5 shows .pdf web pages as black. The same thing happens with Firefox. Does this have something to do with an AdobePDF plug-in?

Safari 5.1.5 shows .pdf web pages as black. The same thing happens with Firefox, at least with the few pages I've checked. Does this have something to do with an AdobePDF plug-in? I recently had to restore my system from Time Machine backup.

The following appears to have I solved my problem with Safari 5.1.5, 5.1.6 and 5.1.7. I also have Adobe Acrobat Pro 9 installed.
Follow mbuffy's post dated May 10, 2012 directly above, and
Do NOT allow Adobe Acrobat Pro 9 to perform the "repair" the missing Adobe PDFViewer Plug-in when the window pops up and offers to repair Adobe PDFViewer Safari Plug-in. If Adobe does the "repair," then I can not view .pdf web pages in Safari or Firefox.
FYI, cmmartin0275 posted the following on Sep 8, 2011 in a discussion of "Missing PDF Pluggin" at https://discussions.apple.com/message/16119130#16119130:
"Just FYI to anyone with this problem...this is straight from Adobe's website.
"Adobe Reader plug-in and Acrobat plug-in are not compatible with the Safari 5.1 browser, which will ship with Mac OS X 10.7 and for 10.6 in July. Adobe Reader and Acrobat will continue to work as standalone applications on Mac OS X 10.7 and 10.6, and will render PDF documents outside of the browser. In addition, Safari 5.1 renders PDF documents natively. However, the Adobe Reader and Acrobat plug-ins will not function as expected in LiveCycle and Acrobat workflows that require either plug-in to render PDF documents in Safari 5.1."
They also go on to say they hope to have a solution or work around before the end of 2011..."
Thanks for the help.

I just did the photoshop camera raw update and now everytime I try to do a text box or change the text the whole program crashes.

I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.

All fixed!!! My Aperture wasn't being recognized because it was in a folder. OK, now I can use my camera with Aperture.

I just installed ios 8 update and now my email won't open and I can't receive calls. All of my apps have been updated. How can I fix this?

I have an iphone 5 and I just installed the latest ios update and now I can't open my email app and I can't receive calls. All of my apps have been updated. How can I fix this?

Try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. If it still isn't working, then restore the phone.

Firefox updated and now when I try to open up a web page, Firefox completely closes the browser. When I open it back up, it asks to restore the session. What happened???!!

Similar Messages

Maybe you are looking for