Firefox updated itself to 3.6.9 and now I can't print anything from an open page, because HP Smart Web Printing doesn't work with this version. What's a replacement extension?

"An unknown error occurred while printing."

I have the exact same problem. I updated to 3.6.12 and encountered the "blank page" printing problem. I ended up re installing Firefox 3.0.19. Printing works great. Also Firefox 3.5.15 gave the same blank page printing problem. I also installed "Better privacy" and " Ghostery"at the time of updates. These programs do not run under the 3.0.19 version. Not sure if if they are related to the problem. Good luck and hope a solution to the problem comes about.

Similar Messages

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

I did the latest download for my iPad and now I can not download anything from the App Store or iTunes. Please advice how I can fix this problem?

I downloaded the last update on my iPad and now I can not download from the apple store or iTunes. I just sits there and continues to act like it will but nothing happens. And then it times out and goes back to home screen. Have a 32 so have have plenty of room.
What would you advice I do? I purchased this iPad in dec 2013.

Double tap your home button to bring up the most recently used apps.
You'll see the app icon below and a screen shot of the app page above.
With your finger swipe the app page above the app icon upwards to fully close the apps (you should do this regularly).
Now, reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any data or settings.
When your iPad comes back up, see if you can download again.

Just downloaded FF4.0 for Mac and it will not open. Says it will not work with this version. what's wrong?

Used FF 3.1.6 for years just fine. Downloaded FF4 and when I went to pull it from my applications folder there was no icon, just a square saying FF4. Pulled it to the bar and got a message saying "you cannot use the appliction "firefox" with this version of Mac OS X"

Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I changed my email on my Apple ID and now I can't purchase anything from iTunes or the app store. How do I fix that?

I changed the email on my Apple ID and now my password won't work and I can't get anything from iTunes or the App store.

Try logging out of your account on the iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if it then works.

My account balance was deleted and now I can't purchase anything from the iTunes Store

I redeemed a $100 gift card about a month ago, used barely any of it and now the balance has been deleted from my account. I added another $40 in gift cards today and still cannot purchase anything from the iTunes Store. A red message pops us telling me to contact iTunes Support. How can I:
1) Recover my account balance?
2) Make a purchase?

Try logging out of your account on the iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if it then works.

I started the lastet update on my phone last night, and now I can't do anything on it, and it's only telling me to plug into itunes. itunes is telling me they deteced a problem and i need to restore my phone. nothing on my phone is backed up, what do i do

i tells me my phone is in recovery mode. if i restore it ill lose all my pictures, my music, everything. is there something elese oi can do?

it says " itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes" so i restore it and after it gets finished it says " the iphone :iphone" could not be restored. the device cannot be found" but ive used this itunes since i got this phone.

I updated the IOS 7.1.1 and now I can't do anything. I need 7.1 now. But how?

This ***** i cant do anything now please help me downgrade my ipad 2

Have you tried doing a hard reset by holding the Home and sleep buttons together until the iPad's screen goes black then a few seconds later the Apple symbol appears, then let go of the buttons?

Adobe acobat/reader doesn't work with this version of firefox

adobe acobat/ reader wont let view info says close adibe acobat and web browers when i do firefox closes and i lose page i was looking at

I have the exact same problem. I updated to 3.6.12 and encountered the "blank page" printing problem. I ended up re installing Firefox 3.0.19. Printing works great. Also Firefox 3.5.15 gave the same blank page printing problem. I also installed "Better privacy" and " Ghostery"at the time of updates. These programs do not run under the 3.0.19 version. Not sure if if they are related to the problem. Good luck and hope a solution to the problem comes about.

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

Updated to OSX Maverick and now I can't stream shows from DirectTV.

I recently updated my macbook pro to OSX Maverick and now I can't stream shows from DirectTV.

copied from DirectTV, so look like have to wait then.
DirectTV wrote:
Macintosh computer running Mac OS X 10.6.x (Snow Leopard), Mac OS X 10.7.x (Lion), or Mac OS X 10.8.x (Mountain Lion) with any of the web browsers below:
Firefox 13 or above
Safari 5 or above
Safari 5 or above

I downloaded Firefox 4 and tried to launch it. The message said that Firefox will not work with this version of Mac OX. Please advise.

I downloaded Firefox 4 and installed it. When I tried to launch it, a message came up saying that Firefox will not work with this version of Mac OSX. Now I have no Firefox. How can I get Firefox 3.6 back on my Mac? How can I make Firefox 4.0 work? Please advise.

Thanks for the reply so quickly! Is the tenfourfox going to be be just as safe and as high of quality as the Firefox 4? Also since Mozilla's website says, "Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to Firefox 4" does that mean if I go back to 3.6 there will be security and stability issues after a "short amount of time"?

Lightroom 3.6 update and now i can't import anything

I've been using LR 3 for a while, really loving it, then a couple of days ago, I was prompted to an update for 3.6. I did this and now I can't import anything.
I'm using a Mac, OS 10.7, and I've been using a Canon 60D with great success and results, and nothing has changed except for me updating to 3.6.
I'm using Camera Raw 6.6 and I updated the DNG converter to 7.2 and still it won't work. The message i get is that the following couldn't be imported because they could not be read. It's true for the RAW and the JPEG files, both.
Help!

I have the exact same problem. I updated to 3.6.12 and encountered the "blank page" printing problem. I ended up re installing Firefox 3.0.19. Printing works great. Also Firefox 3.5.15 gave the same blank page printing problem. I also installed "Better privacy" and " Ghostery"at the time of updates. These programs do not run under the 3.0.19 version. Not sure if if they are related to the problem. Good luck and hope a solution to the problem comes about.

TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Firefox updated itself to 3.6.9 and now I can't print anything from an open page, because HP Smart Web Printing doesn't work with this version. What's a replacement extension?

Similar Messages

Maybe you are looking for