Firefox was working fine in the morning, after half a day, it just crashed and now every time i try to start FF it crashes, i reinstalled FF, even tryed FF 4 beta, every time same crash report window, and nothing happens.

After a half day working normally, FF just crashed, and now i reinstall it, even tryed FF 4 beta, and still getting crash report. Cant even start in safe mode, same crash report window pop up.
Checked for viruses, malwares. Nothing helped.

Other applications print okay? If so, try deleting the Preview .plist
You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~`/Library. Delete the .plist(s) for the application.
If you prefer to make your user library permanently visible, use the Terminal command found below. It does work with Mountain Lion:
http://osxdaily.com/2011/07/22/access-user-library-folder-in-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

Similar Messages

Infragistics UltraWebListbar was working fine with the earlier version of the firfox. But it crashes after updating to version 12.

I am using infragistics UltraWebListbar to display list of menu in one of my page.
It was working fine with the earlier version of the firfox. But it crashes after updating to version 12.
Following are the few details from the stack trace
System.Convert.ToInt32(String value) +63
Infragistics.WebUI.UltraWebListbar.UltraWebListbar.getRenderer() +237

It's a third-party application, ask Infragistics support board. Maybe they have a fix or a dev version to fix your issue.

ITunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

My apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to.. Help

my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...

Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup

My iPhone suddenly went down 3 days ago???? Was working fine in the a.m but

My iPhone suddenly went down 3 days ago???? Was working fine in the a.m but in the p.m CRASH!! Have tried to restore it 7 times but continually get various error messages starting " Itunes could not perform a restore due to an unknown error" The error message numbers varied from (1009), (1002), and (20000)!!!!!??????????
My iTunes version is up to date. I have performed all the trouble-shooting tasks including trying to restore on a different pc without success!!!
Please help.
Regards,
Ciaran

Thanks Allan for your helpful reply....Since I posted that question a UPS truck is, hopefully, winging its way to do a like-for-like swap...Thank God!!!!..so fingers and toes crossed now for a trouble-free life with my new iPhone!!!

Simple pass not working - It was working fine till today morning

I am having a "HP ENVY 15t-j100 Select Edition CTO Notebook PC " . Simple pass was working fine till today morning now all of a sudden it is showing an error message "Sensor not connected.Please connect sensor and try again" .
I tried the maximum methods for troubleshooting like uninstalling and reinstalling driver , software , updating them any many others.
the finger print sensor is working during log in and other occasions. but simple pass is not working.
My OS is Windows 8.1 (64 bit)
Kindly resolute my problem as soon as possible. Thank You
E-mail Id : [edited phone and email by moderator]

Hi @Annamalai007
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see that your Simplepass was working until this morning when it was not. You have uninstalled and reinstalled software and updated the drivers but no change.
Was there any updates installed?
Have you tried dong a restore back to when it was all working? HP PCs - Using Microsoft System Restore (Windows 8)
Next I would do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still remains I suggest you do a recovery back to factory. HP PCs - Performing an HP System Recovery (Windows 8) . During the recovery process you will notice an option to backup your personal files to prevent data loss. If you have not recently done one I suggest you do one now.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.

Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M.

My nano 6th gen was working fine until the updates

My nano 6th gen was working fine until the updates now it's on the pc but not iTunes! I've uninstalled and reinstalled iTunes but nothing is working! Please help!

Here is an apple article that might help:
http://support.apple.com/kb/ht1925
i

I am having the same problem that Paul Birgy is having. It was working fine until the update.

I am having the same problem that Paul Birgy is having.   I can send email from my program but now the reciever cannot read it. Before the update my emails I sent from my program were readable by the reciever.

I send out invoices from Peachtree Premium Accounting 2005. I click on the email icon on top of page and it goes to Microsoft office outlook 2007. It shows as an attachment and in the message it tells the receiver they need adobe reader installed in their computer to read it.   It was all working fine until the last update for adobe reader.
Now they get error message.   Adobe Reader could not open "Invoice #106.PDF" because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded.)
This started March 3, 2010. Since then I have been faxing out of the Peachtree program. That still works fine.
This problem seemed to start right after one of the updates. I was told to try and reinstall Adobe Reader. I have tried that twice and still have the same problem.
To the best of my knowledge I have not had any problems with Peachtree.
Cathy
Date: Tue, 25 May 2010 14:40:25 -0600
From: [email protected]
To: [email protected]
Subject: I am having the same problem that Paul Birgy is having. It was working fine until the update.
Sounds like either
A. Something in your accounting software is corrupting the file or;
B. Something in your email is corrupting the file (some email providors use compression to make the transfer faster which can mess up a PDF).
What hapens when they try and open it? Do they get an error message? If so, what is it (this matters)?
At any rate, it's doubtful that this is a Reader issue but give us some more detail and maybe someone can help here.
>

I have signed in to my account and am able to brouse media but not download or purchase anything. The "buy" button is also white instead of blue and nothing happens when I click to buy. I am able to make purchaces on the same account on my I phone as well

I have signed in to my account and am able to brouse media but not download or purchase anything. The "buy" button is also white instead of blue and nothing happens when I click to buy. I am able to make purchaces on the same account on my iphone as well. What might be causing this issue?

Having the same problem and i just thought it was me ? So frustrating went to my local Apple store and they told me to re-load Itunes again,Done that but still can not buy songs???????????

Brand new computer - Windows 7 - Browser Mozilla Firefox - Trying to install Adobe Flashplayer - after initial box appears, I click 'save' and nothing happens - McAffee Anti virus already installed

Brand new computer - Windows 7 - Browser Mozilla Firefox - Trying to install Adobe Flashplayer - after initial box appears, I click 'save' and nothing happens - McAffee Anti virus already installed - how do proceed?

Try using these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

When I open Muse, I get a message that a new update is available. When I hit install it just closes and nothing happens. Then I got a message I needed Adobe Creative Cloud App to resolve the issue. I downloaded a copy of Creative Cloud desktop but it

When I open Muse, I get a message that a new update is available. When I hit install it just closes and nothing happens. Then I got a message I needed Adobe Creative Cloud App to resolve the issue. I downloaded a copy of Creative Cloud desktop but it says that my Muse is up to date. It was last updated in May but you have a new update today and it will not update. I thought maybe I am not suppose to have the Creative Cloud update because all I have is the individual app Muse and the photography program. So I uninstalled the CC desktop. Then when I open Muse it says I need the CC desktop to help with the update. So I get stopped either way. Now I also had a Pre-Release Muse on my computer and I don't know if that complicated things. Please advise.

All future installs/updates of Muse (and most other Adobe apps) are through the Creative Cloud desktop app. Thus you do need to have it installed.
Are you on Windows or Mac? What OS version?

When I open Bridge the little wheel in the lower left corner just spins and nothing happens.

When I open Bridge the little wheel in the lower left corner just spins and nothing happens. I can't stop it and have tried everything. I have to shut down my computer to get out of Bridge. Oh I have MacbookPro 10.9 and CS6. Any help would be greatly appreciated?

Reset preferences. Hold down Option key and start Bridge. You will get a reset window.

Firefox was working fine in the morning, after half a day, it just crashed and now every time i try to start FF it crashes, i reinstalled FF, even tryed FF 4 beta, every time same crash report window, and nothing happens.

Similar Messages

Maybe you are looking for