Firefox will not install on my computer. It was previously running. Then just stopped. I uninstalled and tried reintalling and it looks as though it is installing then does not complete.
Ran multiple anti-virus/malware to rule out. Everything is good. Registry error perhaps. Pleas Help. Maxthon browser sucks.
The Installation File is downloaded. UAC is disable. I am running AVG Interner Security 2011. I disable all security and When I open the instalation file, it says extracting, and the staus bar goes to 95%. I then get the circular waiting icon, then nothing. I can see 3 Firefox related files in the Processes of the Task Manager.
Firefox Setup 1476K
setup.exe 2840K Firefox Installer
setup.exe 2864K Firefox Installer
This is not a result of trying to open the installer multiple times. Each time I end the processes before trying again.
I sincerely appreciate the help.
Similar Messages
-
Why can't I get Adobe Reader 11 to work at all?? Won't open, repaired via Windows XP as suggested, does not help. Will not open files in Emails, or stored on the disk. HELP!!!!!
No, neither vers. 9 nor 11 will do anything by itself, no errors, no nothing, hourglass shows up for about 10-15 seconds, no message, no nothing. Very frustrating, to say the least. When you have 11 loaded it says Acrobat failed to load its core .DLL but this is several minutes later. Can’t find anything relating to that problem. Any help would be appreciated as I have some very important files that cannot be opened.
Curtis Jenkins -
I am trying to save a file in text edit in icloud. But the option of icloud does not show up in the 'where' box?
You cannot. iCloud is not for textedit
Read here https://discussions.apple.com/message/20351781#20351781 -
MacMail stopped connecting yesterday morning. It was up and running and then failed and I have not been able to connect to yahoomail or icloud since. i have internet connectivity and can sign on to both yahoomail and icloud thru Safari. I have deleted the mail accounts and readded. still cannot connect. Any advice?
I feel for you bro i had this same BS problem only a few days ago. I must have spent about 5 hours in total trying to fix it and this included perusing these forums for an answer of which none of the 'solutions' worked, i tried using it on other PC's of which none of them it worked. Tried sw reinstallations, SP/2 reinstallations/removals, hardware changes to USB blah blah nothing worked and its's not like i don't know jack about computers because I do.
Your even lucky because in my case all that was required was the latest FW upgrade to make my player COMPLETELY UNRECOGIZABLE by both the FW installation program and WMP0 hence I couldn;t even downgrade.... I removed the FW thinkin it was corrupt as exactly what you did but because of Creatives wonderful TQM I couldn't even put different FW on.
In the end I just sent it back for a return but now I'm kinda regretting doing so as reading these forums shows that there are 0 issues with this player that Creative simply overlooked and sooner or later I might get with one of them (headphones anyone?!). If the next one is a dud I may wait for the new iRi'ver h0 or somrthing. -
could not install mountain lion We could not complete your purchase. OS X Mountain Lion is not compatible with this computer. I'm running the latest update 10.6.8. Any help to overcome this issue will be great
rarramirez wrote:
Any help to overcome this issue will be great
There is nothing to overcome, your mac is too old to run Mountain Lion. For an iMac it must be a (Mid 2007 or newer) http://www.apple.com/osx/specs/ -
I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much
Most people have no problems with installing firefox as an upgrade, but there are quite a few things that can cause problems. Please have a look at the articles
* [[software Update Failed]] <-- clickable link (blue ) --
* [[firefox will not start]]
* [[firefox does not work]]
Post back after you read them and say what you tried. Have you ensured you used an admin account, possibly needing to check the UAC setting, and that security software is not blocking the changes. You should certainly try starting in firefox's [[safe mode]] either from a menu/icon option or by holding the shift key as you attempt to run firefox.
Is the browser icon you see on the desktop, and a firefox icon ? -
I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?
Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.) -
Ap store says "we could not complete your purchase. OS X Mountain Lion is not compatible with this computer". I'm running 10.6.8 duel core intel with 15gb of memory. Any ideas on why I can't download?
Thanks.If the OP has this much RAM in their iMac, certain this Mac can run Mountain Lion.
The reason it might not be installing is that 15 GBs of RAM.
Your iMac should have (4) equal sized, 4 GB sticks of RAM for a total of 16 GBs.l
If your iMac is only reporting that there is only 15 GBs of RAM, you have a RAM stick that is either not seated in its slot properly or is defective/going bad.
This maybe the reason that it won't download it.
Also could be you are running out of free space on your HD.
You need, at least 15-20 % or greater free space left on your HD. -
my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?
Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish -
I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.
If you were instructed to call them, then that's what you should do. They will probably need to verify your identity before helping you with the security question.
-
When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18
The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
Hi hope somebody can help? i have acrobat 6 pro, worked well for last two years but then just stopped working. Have reinstalled but still will not open, ronning windows 7. Help please!! Janice
Hey janicem42177174,
Adobe no longer supports the installation and use of Acrobat 6 as it is a very old version which is not compatible with Windows 7.
I would suggest you to please use the latest version of Acrobat i.e. 11.0.10 which is fully compatible with your OS with its enhanced features and functions.
You might download a free 30-day trial version of Acrobat from here:
Download Adobe Acrobat free trial | Acrobat XI Professional
Let me know how it goes
Regards,
Anubha -
My razr m just stopped working turned off by itself and will not turn on
my razr m just stopped working turned off by itself and will not turn on
raamw,
My wife has the exact same phone and I have the razr HD (basically the same, just larger screen etc).
We have run into the same thing a few times, and as stated above by Callie I have found it is a dead battery issue. BUT unlike my previous phone (Droid incredible) that I could usually plug in, wait a few minutes, then at least turn on and use while plugged in, I have found for the M and mine it really took a bit to get it charged. Kind of like as long as there is some battery you are ok, but once it dies it takes a bit of charging.
ALSO - I am going to perhaps not use the right terms or words for this, but I THINK (emphasize think) at least once it wasn't enough to use one of the lower amp chargers. at least on mine. tried to charge and charge and didn't seem to work. Finally I took a charger that I normally need to use for my daughters tablet and use that then it had enough kick. I will note I think that was the issue.
regardless each time yes it took awhile before we could turn them on. ALSO it seemed like it took a much longer time in holding the power button down. BUT eventually they started up and we were good to go.
we love our phones, she especially loves the size of the M. BUT we have learned in the short 2-3 months we have had them, if possible, don't let the thing drain all the way. just seems to cause a bit of a hastle -
Hello this is the first time I have ever had a problem. I am trying to down load a movie and it keeps giving me error -50. I have signed out and back in and deleated the download and tryed again and still will not download.
Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
I installed Apple TV yesterday and then purchased and watched a film for the first time. Today Apple TV does not accept my pass word. I' m confused can any one help me?
there are up to 3 different password
there is the appleID password
there is the wifi encryption password
there is te shared itunes lib password
Maybe you are looking for
-
BP not updating in Customer Master data KNA1
Guys, I am creating a BP in CRM 7.0. Once the BP is saved & created successfully entry is present in all CRM tables as well as in the ECC side. But for few cases the Customer Master data Table KNA1, KNVV is not getting updated, i.e no value for the B
-
I want to bring in the Motion 3 templates into Motion 5. Alas didn't bookmark prior reading. I don't even care that they show up as templates within M5. (altho that would be nice.) I have 2 computers - one with M3 and one with M5. Somehow a year a
-
Main vi freeze after close sub vi
Dear all, I call a sub vi from my main vi but when i close sub vi, the main vi become freeze. The sub vi is a vi i used to edit a data from my database, its close after execute a query. Freeze also happen if i close the sub vi with [x] in the corner
-
Mass Cancellation purchase requisition or Mass unfix purchase requisition
Hello, Our purchase requisitions are created through MRP. When we transform our purchase requisitions into purchase orders, if quantity in PO is smaller than the quantity in the P-Req, the P-Req is fixed. I would like to know if there is a way to do
-
I haven't been here before. For some crazy reason when I try to save a re-sized image with a different dpi, PS6 indicates I have saved it. But if I go to re-open the same image, its in a different (but proportional) size and its original dpi. I also