Firefox will not print correctly. When printing from Firefox it looks like it thinks the paper size is a 3 x 5.

I tried re-installing Firefox 23.0.1. It printed fine for about 4 times and then it went back to the same problem.
In order to get everything to print out I need to scale to "shrink to fit" but then it is so small I can't read it.
I switched to Internet Explorer and everything prints fine.
I have a Brother MFC9325CW printer. I have a PC with Windows XP

Have you tried all explained in the [[Fix printing problems in Firefox]] or reset printer margins.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Similar Messages

Firefox will not perform correctly when I open new Firefox windows

The only Firefox windows that work correctly are the first window I open (which has tabs saved) and the window that opens when I go into tools> options> help, any other new Firefox window I open wont let me open a new tab or window from the page I am on (I can still open new tabs with the bookmarks or new tab button), I can't use the back page/forward page/refresh page/stop loading page buttons and the page I am on doesn't show in the address bar.

go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update Firefox to the latest version by going to Help Menu -> About Firefox -> click Check for Updates -> if an updated version is found then download the latest version and install it. After that follow these steps:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Zoom -> click "Reset"
-> go to View Menu -> Page Style -> select "Basic Page Style"
-> go to View Menu -> Toolbars -> select Menu Bar and Navigation ToolBar -> unselect all unwanted toolbars
-> go Tools Menu -> Clear Recent History -> ''Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on ALL Options -> click "Clear Now"
-> go to Tools Menu -> Options -> General -> ''When Firefox starts : '''select "Show My Home Page"''''' -> Type the address of the website which you want to be your HomePage e.g. http:www.google.com -> place Checkmark on "Show the Downloads window when downloading a file" -> select Radio Button option2 "Always ask me where to save files"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows
2) Load images automatically
3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> ''Firefox will: '''select "Use custom settings for history"''''' -> PLACE CHECKMARKS on:
1) Remember my Browsing History
2) Remember Download History
3) Remember Search History
4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons
2) Block reported attack sites
3) Block reported web forgeries
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

I'm not 100% sure, but I believe you need Acrobat Pro for that.

"Non rectangular objects will not appear correctly when exported using CSS."

I am using Ind CC 2014 exporting a document to a reflowable epub. The document contains an .ai image. The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS." Any suggestions appreciated.

Thanks!
>
"Non rectangular objects will not appear correctly when exported
using CSS."
created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
/InDesign EPUB/ - View the full discussion
<https://forums.adobe.com/message/6886892#6886892>

My iPhone will not send emails when away from my home wifi

my iphone will not send emails when away from home wifi any advice

Hey craggee,
Thanks for the question. This is usually do to a limitation by your ISP/email provider:
If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

Removed working Firefox 7, Installed Firefox 10.0, Firefox will not load. When I click on icon, firefox.exe process shows briefly in task manager, then goes away....no errors, nothing

Removed working Firefox 7, Installed Firefox 10.0, Firefox will not load. When I click on icon, firefox.exe process shows briefly in task manager, then goes away....no errors, nothing. Never see browser panel at all. Also tried to install Firefox 9.0, but the same result was observed.

Rather difficult to say what the problem may be at present but for general info please have a look at
* [[safe mode]]
*[[firefox will not start]]
*[[firefox hangs]]
Note sometimes you may have to wait a while for firefox to shutdown completly, and if it has hung then as explained in the above articles you may need to kill any firefox.exe process that is still running (and maybe plugincontainer.exe)
Try starting firefox in [[safe mode]] e.g. by holding down shift key
* do not make any changes in the first window, just click on continue<br/> ? Do you get as far as seeing the options window for safe mode ?
If firefox is crashing see [[firefox crashes]], this is easier to work through if you can get firefox to start without crashing on startup. Currently some firefox users are finding Firefox 10 crashes on startup, and a new version Firefox 10.0.1 is being released very soon to deal with this and another cause of hangs.
Not saying any of this applies to your case but recent issues include
* ask tool bar causing hangs if video is used none English versions [/forums/contributors/708073]
* possibly some crashes do not start the crash reporter and other issues [/forums/contributors/708122?page=2#post-45059]
* some general info about current crashes [/questions/917748#answer-308124]

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Firefox will not load estatements or bills from within my secure banking site

When I go to the CIBC secure online banking page, Firefox will not load estatements from the link provided. Firefox loads the estatement page but leaves it blank

Thanks cor-el looks like Oracle need to update their linux installation instructions then. If only I'd have known that before doing all sorts to get it working.
I now have Java in Firefox, Chrome and Seamonkey :) :) :) :) :).

Firefox will NOT goto URL when typed in. How to fix?

When I type a URL address in the address bar and then hit enter or the arrow on the right side of the bar Firefox will not go to the URL. It acts as though nothing has been entered.

See if you have the extension "AVG Safe" and if you do disable it, and refer to "Problematic Extensions" an reinstalling AVG Free without the "Link Scanner" and without any other extension they may try to install.
* http://kb.mozillazine.org/Problematic_extensions
When Firefox 8.0 came up, if you have that extension, it should have been right up at the top as a third party extension.

Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

Settings: firefox will not accept easy hideIP. cannot get firefox proxy settings changed.

easyhideIP will not be accepted by firefox and the prosxy settings of firefox will not change. They are set to auto accept but that does not work, the reload feature does not work. I have uninstalled firefox and reinstalled and the problem persists. I have no problem with IE 8.

If you aren't able to connect in Firefox, but can connect with other programs, the most common cause is a firewall. See [[Firewalls]] for instructions on configuring firewalls. (Make sure you configure all firewalls that are installed)
Another possibility is that you are in offline mode. Make sure "Work offline" in the File menu is ''unchecked''.
For other causes, see [[Error loading web sites]]

IMac will not boot up when printer is plugged in USB

After buying my new iMac (with Tiger) I successfully transfered everything from my old iMac (with Panther) and all was well.
The problem is that when my printer (Canon Pixma MP130) is plugged in on start up, the iMac will not boot up (no gears turning on the white/grey screen). When I unplug the printer from the USB and start it up, it works fine. Its not a super big deal because I can just plug the printer in when I need it. But why does it do this?
I foound on the internet someone else who had the same issues. It was suggested to him to search the printer manufacturers website for updated drivers. I did this, installed them etc..... still no luck.
I am without any mac guru's here in Yellowknife......help!
Angie

Hello there,
I hope it is OK to recycle this old thread.  I did not want to create a new one since I am experiencing the exact same issue as the original poster *flying girl* as well as other posters in the following threads:
http://discussions.apple.com/thread.jspa?messageID=4190807
http://discussions.apple.com/thread.jspa?messageID=3950255
http://discussions.apple.com/thread.jspa?messageID=4201169
http://discussions.apple.com/thread.jspa?messageID=4490899&#4490899
http://discussions.apple.com/thread.jspa?messageID=4470944
I have two Macs, a PowerBook G4 and an Intel iMac 20" (Aluminum)--please refer to my signature or profile for the specs of these machines.  Of course, I got the PowerBook before I got the iMac.  I am running the latest version of the Canon MP130 drivers, printer drivers version 4.8.3 and scanner drivers version 12.11.0, on both machines.
When I turn on my PowerBook with the Canon PIXMA MP130 multifunction turned ON and connected via USB to the PowerBook, the PowerBook boots up just fine.  I have even experimented with both a USB hub and a direct connection to the Canon MP130, and the PowerBook boots fine in both instances.
However, when I turn on my iMac with the Canon MP130 turned ON and connected via USB to the iMac, the startup tone plays, and then the iMac hangs at the blue/gray solid screen--it does not even show the Apple logo or the spokes--that is, until I turn the Canon MP130 OFF.  When I turn it off, the Apple logo appears, the spokes move, and my iMac boots up just fine.  And as long as the MP130 is OFF, I can boot the iMac fine from scratch too.
I tried starting in verbose mode (⌘V) and single-user mode (⌘S), and the gray/blue screen still appears after the startup tone plays; again, if I turn the Canon MP130 OFF, the rest of the boot sequence resumes as normal, and only then do I get to see the descriptive text for those startup modes.  But the text goes by so fast that I miss most of it--I did manage to catch something that said something like "get full config descriptor = NULL," but I am not sure if that was the exact wording.  I would need a good camcorder or even just a digital camera or another device to capture exactly what the screen says in verbose mode.  If I had those options, I would post pictures here.
I was thinking about contacting Canon, but since the issue happens on one Mac only, I figured they would tell me that it is a problem with my Mac.  So hopefully posting the information here is OK.
Another key feature is that the Canon MP130 has a built-in card reader.  I made sure that my Startup Disk preferences were set to boot from the system drive, and they still are.  And I have reset the SMC and PRAM on the iMac.
I would like to mention the following link:
http://www.ehmac.ca/anything-mac/50389-intel-imac-wont-boot-when-canon-printer-p lugged.html
If you go to page 2 on that above thread, it shows one user who allegedly physically disconnected the card reader connection from the inside of the Canon MP130 (I would NOT recommend that myself).  I just wonder if there is a more feasible resolution to this issue.
Does anyone else experience the same issue with other printers or multifunctions?  Also, why does the issue occur only on my Intel iMac 20" (aluminum), and NOT on my PowerBook G4?
Please let us know about your experience as it seems many of us are at a loss for a solution.
Thank you very much for your help; we await!  :)
Cya!
\m/ Mad Metal Mage \m/

Hp laserjet pro color mfp will not wake up when print tasks are initiated!

Is there anyone that can assist me with a HP LaserJet color printer mfp 200 that weill not "WAKEUP" when print tasks are sent to the spooler?

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
    This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
    first if needed. More Wireless Printing help is here.
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Firefox will not allow me to print.

Whenever I attempt to print it says "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer. Do you want to install a printer now?"Printing works with all other applications including Microsoft office and internet explorer. I also tried updating from 3 to 7 and problem still persists. I also have tried resetting my print setting.

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Firefox will not print correctly. When printing from Firefox it looks like it thinks the paper size is a 3 x 5.

Similar Messages

Maybe you are looking for