Firefox will stop responding whenever I try to visit any webpage, is there a way I could fix this?

Whenever I try to visit any kind of website, firefox will start to load up the page and then freeze up. I've tried visiting webpages with firefox in safe mode but it would still freeze up when I tried to load up a webpage.

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Similar Messages

  • HT1414 When I search for stuff on the internet it says safari could not open the page because the server stopped responding and non of my games work either. What do I do to fix this?

    When I search for stuff on the internet it says safari could not open the page because the server stopped responding and non of my games work either. What do I do to fix this?

    Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
    IF that does not work -
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Finally - if problem still present -
    Go to Settings>General>Reset
         Reset the network settings - you will need to add the password of your home WiFi in your phone once more
    The device should turn itself off & back on then go into Settings>Wifi and join your network

  • Firefox will often close in the middle of use with no error msg. How do I fix this?

    I currently use an aspen a701 tablet. When I first open firefox it takes over a minute to load the first website or two then works fine. After a few minutes of surfing firefox will just close with no warning or error msg and when I reopen it, it opens to the home page and not my previously viewed page before it closed. Can you fix the loading speed and sudden closing? thank you for your time and help

    Type '''about:crashes''' in URL and provide the crash id starting with "bp-"
    try with firefox beta
    *https://play.google.com/store/apps/details?id=org.mozilla.firefox_beta

  • My ipod will not respond to anything. I tried to restore but unable to how can I fix this?

    Itunes suggeested that my Ipod was coruppted and to restore I tried this and it uploaded software and tried to restore but an error message came back (I did not save the error message). I tried to look up how to resotre and when it shows to hold the menu and the on/off on the wheel for 6 seconds nothing happens just a black screen no indication that the Ipod is on or off. How can I restore this?
    The error is an unknown error 1437

    I wrote this few years ago, see if this still helps
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Firefox stops responding when I try to play words with friends, eventually a box pops up about script

    First, let me say I have the latest version of Firefox and Adobe Flash Player and Java Script. When I click to play Words With Friends (on pc) my computer starts racing and sounds loud and every thing freezes. If I try to click on slider or anything else, it says Mozilla Firefox (not responding), then it takes several minutes and a box pops up that says something about a script, do I want to continue or ?(I can't remember), after I click continue, I can play the game, but, at any given time Firefox will stop responding again!! A box also pops up from AVG saying that Firefox is using too much memory. Just an aside, I can play Scrabble on Facebook without any problems whatsoever. Please help, it is driving me crazy. Thanks

    Sounds that you are missing the plugin that is used to play those videos embedded in Firefox.<br />
    Your system details list doesn't show any media player plugin, so you will either have to check if the plugin(s) are installed, but disabled or install missing plugins.
    *https://support.mozilla.org/kb/Popular+plugins
    You may need the new WMP plugin (np-mswmp.dll) because Flash always uses a dedicated player to play the videos and would never offer to save videos directly unless an extension is used.
    * https://support.mozilla.org/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
    * http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

  • My DVD drive doesn't work.  It stopped working after I upgrade to the new OS.  What can I do to fix this?, My DVD drive doesn't work.  It stopped working after I upgrade to the new OS.  What can I do to fix this?

    Is there a way I can fix this problem without going to the store?  It seems that my macbook pro was okay untl I upgraded.  It doesn't read DVD nor any CD.

    I've not heard of any updates that caused optical drives to fail. Best thing you can do is to make an appointment at the Apple Store. They will run diagnostics on your computer free - you only pay if you choose to have it repaired.
    If it does turn out to be a bad SuperDrive and the price to replace from Apple seems high, you can always replace the drive yourself. Try OWC for listings of replaceable drives and the toolkit and instructions on how to replace the drive.
    Clinton

  • I updated to Firefox 4 and now I get a Firefox has stopped working message whenever I try to load any websites.

    I updated to Firefox 4 and now I get a Firefox has stopped working mesage whenever I try to load any websites. I updated my video driver and cleared my history to see if that would help. I looked for a crash ID on the homepage, but the last registered crash is from February. I also tried to open in Firefox safe mode, but the problem continued to occur. I'm not sure what to do next, please help!

    Try to (re)install the latest version of FireFTP.
    *FireFTP: https://addons.mozilla.org/firefox/addon/fireftp/
    * http://kb.mozillazine.org/Profile_backup

  • Safari stops responding when I try to bookmark (and other slow problems!)

    Two weeks ago my logicboard died, so I sent my ibook out to Apple for it to be fixed. Ever since I got it back this past Tuesday, my Safari has been extremely slow, but nothing else is wrong with my computer. Here are the problems:
    - The biggest issue is that Safari stops responding when I try to make a bookmark. The popup appears to select the bookmark's destination and to enter the name, but when you hit ok, the rainbow wheel comes up and it stops responding, so I have to reset Safari, and now I can't make new bookmarks at all.
    - It lags when it tries to open new windows, especially new tabs.
    - If a new page loads that scrolls at all, and then I try to scroll down, the wheel appears for several seconds until it can load the rest of the page. It's as though it gets stuck before it can scroll.
    - Sometimes when typing, it will also start to lag behind my typing speed, or if I try to click on a new field, it will not immediately allow me to type on occasion.
    All these things have never happened before I sent it out. I have reset my cache, and I have tried entering the open DNS addresses in my networks, which has improved loading speed, but hasn't fixed any of these problems. Does anyone have any idea what could be wrong and how I can fix anything?
    Message was edited by: canyon to the sky

    Try verifying the hard disk.
    Boot from your restore disk while holding down the C key until you see the Apple logo, then let go of the C key. You'll see an Installation window, select English. From the Menu Bar, select Utilities/Disk Utility. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Verify. If DU reports errors, click Repair. If Disk Utility cannot repair the disk you have several options. One is DiskWarrior or
    TechToolPro If Disk Utility can repair any errors, go back to the Menu Bar, click Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
    If you don't have a restore disk, try booting into Safe Mode
    Carolyn

  • My 5.01 and 6.0 beta stop responding when I try print preview. Help?

    First, why didn't you design your form to keep the acceptible information when one field didn't meet your requirements. So 1997.
    Now. On my Win7 machine, 6.0beta suddenly started hanging, (stopped responding) whenever I tried Alt-F-V or "file, print preview". I d/l'd 5.01 and the problem persisted. This isn't happening on my 5.0 LinuxMint11 machine, but I can't get past it. Can you suggest something that will remedy this?

    Anyone?

  • When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

    When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

    You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

  • When ever the Download window opens firefoxes freezes/stops responding. I can't do anything with it. As soon as it opens, no response. I disabled most of my add-ons but still doesn't work. It's only started recently. Maybe a week or so.

    When ever the Download window opens firefoxes freezes/stops responding. I can't do anything with it. As soon as it opens, no response. I disabled most of my add-ons but still doesn't work. It's only started recently. Maybe a week or so.
    So i can't download anything until i figure out how to fix it.

    When ever the Download window opens firefoxes freezes/stops responding. I can't do anything with it. As soon as it opens, no response. I disabled most of my add-ons but still doesn't work. It's only started recently. Maybe a week or so.
    So i can't download anything until i figure out how to fix it.

  • When I try to copy pictures to my iphone 4s I get this error message: Cannot copy item. The device has either stopped responding or has been disconnected. Any help?

    When I try to copy a photo from my computer (windows 7) I get this error message: Cannot copy item. The device has either stopped responding or has been disconnected. Any help for this?

    Are you syncing the photos using Itunes?
    When you plug your phone into your PC, in Itunes under the picture tab you can sync photo and then choose the photos.
    Look here more detailed instructions
    http://support.apple.com/kb/HT4236

  • I loaded 4.0 and now I cannot view any videos. Flash player causes Firefox to stop responding.

    I am running XP. I recently loaded Firefox 4.0 on my system.
    There were a lot of problems loading some web sites. Your help system suggested to disable all plugins. I did this and I don't have problems with web sites anymore but I cannot view any videos. I have tried reinstalling Adobe Flash but it just causes Firefox to stop responding.
    Ideas?

    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
    While you are in safe mode;
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart

  • I have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search google in English

    i have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search by google this one is not such as my google home page
    == This happened ==
    Not sure how often
    == i use to search any page like movies or etc

    Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
    So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
    If someone knows how to fix this and make firefox launch normally, please reply! Thank you

  • Error code: ssl_error_no_cypher_overlap comes up when I try to veiw the log in screen on tumblr, how to fix this in FireFox 26.0?

    I can browse through tumblr just fine, but whenever I go to the login page it said:
    Secure Connection Failed. An error occurred during a connection to www.tumblr.com. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
    I understand that tumblr has certification errors but that never happened to me before I until I upgraded to Firefox 26.0. I like FF and I don't want to use any other browser.
    How to fix this?

    Does it help if you either disable SSL3 or disable TLS as a test?
    security.tls.version.min = 1 and security.tls.version.max = 1 disables SSL3 and enables TLS 1.0
    security.tls.version.max = 0 and security.tls.version.max = 0 enables SSL3 and disables TLS 1.0
    Type <b>about:config</b> in the location (address) bar and press the <i>Enter</i> key to open the <i>about:config</i> page like you open a website by typing the URL in the location bar.
    *If you see a warning message then you can confirm that you want to access the about:config page.
    *http://kb.mozillazine.org/about:config
    See:
    *http://kb.mozillazine.org/security.tls.version.*
    0 means SSL 3.0, 1 means TLS 1.0, 2 means TLS 1.1, etc.
    You can try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
    If that helped to solve the problem then you can remove the renamed cert8.db.old file.
    Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.
    Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
    If that didn't help then remove or rename secmod.db (secmod.db.old) as well.

Maybe you are looking for

  • Open doc syntax using BEx parameters (Selction option)

    Hi, I have created the parameters in the BEx Query. I have choosen the option for parameters like Single value, selection and Interval. Now I have created a crystal report using above BEx query. I am trying to create a open doc call to tun the report

  • Availability check in R/3 for CRM 5.0????

    Hi We are migrating from CRM 3.0 to CRM 5.0 but we are having problems with the availability check. When we execute it in CRM, it doesn't bring the result. Does anyone know where we can find the solution? Thank you Cecilia

  • Output xml file from data in a drag/drop AIR app.

    I am interested in creating a WYSIWYG drag/drop AIR app. in which I can drag art and other components, then export the (x,y) positions of the components and other info into an xml file. I am interested in using .ai files instead of raster based art.

  • Unicode-UTF8-Support for MaxDB?

    Hello, according to general information MaxDB just supports UTF16. If one is facing the decision to migrate an Oracle 9.2 Non-Unicode-DB to either a Unicode-UTF16-MaxDB or a Unicode-UTF8-Oracle-DB, the answer probably would be to go for a Unicode-UTF

  • Problem with transfer photos from iCloud to Aperture

    Hi, I have a problem with APERTURE. I Can't transfer a photos from iCloud to project of Aperture. I have Macboook Pro 15, model 8,2 with MAC OS X Maverick and Aperture 3.5.1. Who can help me ? Many thanx.