Firefox won't save images or web pages, even after upgrading, reinstalling and resetting... How do I fix this?

A couple upgrades ago, I noticed that Firefox wouldn't boot properly. According to "Task Mgr.", it would load partially with a "*32" after it's name in the listing, but not enough to display a window on screen. After ending the process, and restarting the program again it would usually boot fully. (not always, but usually) The "*32" confuses me as I run a 64bit Windows 7 system and during installation I was sure that I saw mention of a 64bit program being installed. Apparently, after the last upgrade, that issue was resolved; but Task Mgr. still lists the program with a "*32" after it.
The issue now at hand is that Firefox won't save images online or save web pages. I'll right-click and select "save image as" or "save page as" and... nothing. No box appears prompting me to name a file or designate a location to save that file to. Nor does anything happen when I use the "File" menu for the same function either. This is, to say the least, is very frustrating. There may be other things not functioning that I'm not currently aware of, but I haven't been able to or had time to do a complete check of the functionality of the program. I've never had issues of any significance with Firefox in the past. It's always been very reliable for me, so I'm hoping there's a relatively quick fix that I simply haven't been made aware of yet...
Thank you for your suggestions and time looking into this matter...
Curtis Laipple

It probably will take a little time to work through this troubleshooting article, but hopefully you will get a complete solution: [[What to do if you can't download or save files]].
Regarding the *32, I see the same thing on Win 7 Pro x64. No worries. Firefox for Windows is compiled only as a 32-bit application.

Similar Messages

  • I pad is frozen when I touch it. I can enter a web address and get new web page but bottom is gray and frozen how do I fix?

    I pad is frozen when I try to touch it. I can enter a new web address and it gets to website but the bottom is frozen. I can send email but cant do anything else on line.

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have recently downloaded 4.3.3 (I think this is the most recent) on my iPhone 4, however it won't play through my docking station even when it's charging! How can I fix this?

    Can anyone tell me how to resolve this?

    I didn't think of this earlier, but if it makes any difference: the PC I'm running iTunes on and have had this iPhone connected to is running Windows 7 Ultimate.

  • When printing from an online PDF, the page prints in extra large scale. How do I fix this?

    when printing from an online PDF, the page prints in extra large scale. How do I fix this?

    This can happen when Firefox has misread the paper size from the information supplied by Windows. Clearing it can involve finding some obscure settings, but here goes:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''print''' and pause while the list is filtered
    (3) For each setting for the problem printer, right-click and Reset it. The fastest way is to right-click with the mouse and then press the r key on the keyboard with your other hand.
    Note: In a couple other threads involving Brother printers, the preference '''printer_printer_name.print_paper_data''' was set to 256 and when the user edited it to 1 that fixed the paper size problem. If you see a 256 there, you can edit the value by doubling-clicking it or using right-click>Modify.

  • I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix this?

    I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix this?

    If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
    (116252)

  • My Google search autocomplete me in Firefox does not work anymore. However, it still works with Internet Explorer. How can I fix this so Google gives me search suggestions again?

    My Google search autocomplete me in Firefox does not work anymore. However, it still works with Internet Explorer. How can I fix this so Google gives me search suggestions again?

    Solution update: Disabled XULRunner 1.9.1 extension from Add-ons > Extensions. Problem solved.

  • When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?

    When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My mac mail won't let me receive emails but will let me send them. How do i fix this ?

    my mac mail won't let me receive emails but will let me send them. How do i fix this ?

    I am intermittently having the same problem. I can send email, but once the Mail application is opened, it will only pull emails in from the server one time and then I have to "Force Quit" and restart the application to receive incoming mail again.  I've tried restarting the computer. I've made sure I have all the system updates. I've checked for conflicts between applications and so far nothing fixes the problem. Once in a while, Mail starts functioning normally on its own, but in a few days it goes back to the same old problem. Has anyone figured out what if going on with this isse?
    Joan

  • After downloading the iOS 7, it asked me if I agree to the terms and conditions and I keep clicking agree but it stays on that page and I can't even use my phone now. How do I fix this problem?

    After downloading the iOS 7, it asked me if I agree to the terms and conditions and I keep clicking agree but it stays on that page and I can't even use my phone now. How do I fix this problem?

    I have the same problem. frozen on the Terms and Conditions page. Any help, anybody?

  • I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix this when it just stopped working today?

    I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix the problem when it failed just today?

    If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
    (116252)

  • Imovie '11 won't let me share a specific project it says "quit imovie and reopen" how do i fix this and share the project?

    imovie '11 won't let me share a specific project that is no different from all the other projects.  Every time I try to share or export the project it says "quit imovie and reopen" this can't be a memory problem because I have a lot of memory left and it allows me to export other projects but just not this one.  How do i fix this and share the project ASAP?

    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I'm trying to uninstall firefox and reinstall it as it keeps freezing, but it wont close and so I cant reinstall it. How can I fix this?

    For the last fortnight or so, firefox kept freezing, but it would always fix itself within a minute or so. I did a computer scan and everything was clean and I reduced the number of tabs I had open to try and speed things up, but even when I had only one tab open, it would freeze. Today, it froze and hasnt fixed itself even after 5 hours, and after ive restarted my laptop. A message keeps popping up about 'a script has stopped working' and whatever I press makes no change (stop script, or continue). Im trying to uninstall and reinstall firefox, but I can't uninstall it until the programme is closed. But I cant close it as it is completely frozen. How can I fix this?
    Thanks in advcance.

    Usually uninstalling and reinstalling only helps if the program files are damaged. When the issue if an add-on or setting, then you wouldn't expect to see any change. (I am assuming that you do not remove all your personal data, as that would blow away your bookmarks.)
    If this started after you installed Firefox 27, do you want to test whether Firefox 26 still works smoothly? This article has a link to download the installer from Firefox 26 (you need to visit using Firefox 27 to get the link): [[Install an older version of Firefox]].

  • Imessaging won't work after yosemite update...how do I fix this?

    I'm connected to wi-fi, yet imessages won't send or receive. It worked until I updated my MacPro to Yosemite. How do I fix this?

    Not knowing what you have tried.
    What does Wireless Diagnostics show?
    Wireless Diagnostics
    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    WiFi Potential Temporary fix - Yosemite
    Also try turning off Bluetooth.

  • Firefox won't load parts of web pages or let me log into certain websites

    I don't quite know how to really explain this, so I'll provide two examples of the problems I'm experiencing:
    The first is that, whenever I go onto any of those Wikia sites, Firefox doesn't seem to load anything other than the main page content. By this, I mean that it won't load any "Recently edited/added pages" box or "Recently uploaded images" box on the right hand side of the page, nor will it open the Contents tab to navigate different sections of the main page content itself.
    Another problem I'm having is logging in to a website I usually frequent. It uses Facebook, Twitter and/or Google+ to log in, and the site has recently started running on Flash and Silverlight. Up until a few weeks ago, I am unable to log in to this website for the same reason as the example above - it just doesn't seem to load after clicking to log in, yet the rest of the site is fully functional.
    In regards to the former example, I did manage to do something with Java that managed to fix it, however when attempting to emulate the solution when it happened again, nothing happened. I'm unsure of what the problem is. Can someone help?

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can open the Web Console (Firefox/Tools > Web Developer).
    Check on the Network tab if any content is blocked and has a file size 0 (zero).
    *https://developer.mozilla.org/Tools/Web_Console

  • Read HTML tags and Save Images in web page

    I had problem with reading HTML tags and save all images in that page. I can source code in web page but I dont know how to Identifly the image tag ( IMG tag ). I think i want to use string tokenizer class.
    But i dont know how to use it in my problem. If any one know how to do it. reply this.

    cnapagoda wrote:
    I had problem with reading HTML tags and save all images in that page. I can source code in web page but I dont know how to Identifly the image tag ( IMG tag ). I think i want to use string tokenizer class.
    But i dont know how to use it in my problem. If any one know how to do it. reply this.If you have a big, long string with HTML content in it you might try splitting on a regex like so:
    String html = ...
    String[] imgTags = html.split("<img.*?>");[http://java.sun.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)|http://java.sun.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)]
    to get your image tag data and then parsing that to get the src attribute. You can either treat this problem as a big string-parsing problem, or getting some HTML DOM library and using that to structure the page as a tree for easier access.
    If you want more help you'll have to show the code you have so far. We can't write this for you.

Maybe you are looking for

  • Video Converter Compatibilty Output Codec?

    Hi Gang Yes unfortunately I'm still in 10.4 which eliminates the capability to download any type of MTS converter software which I'll need to convert PAL to NTSC. 'ClipWrap2' and others are all designed for 10.5 or 10.6 Work Around: I also use a Dell

  • Bluetooth Stereo Headset

    I'm upset that Apple has not allowed music to stream across bluetooth on the iPhone. It seems that they are trying to control all avenues of access on the iPhone. Why would they not want us to be comfortable when using their product by not having wir

  • Overpriced upgrade option, or something Im not seeing?

    I'm looking to buy a MacBook Pro as I am an avid Video Editor (Final Cut Studio, yay) and I also need a Laptop. I was looking at the 17" MacBook Pro and all its upgrades (Processor, RAM, and Harddrive) and I noticed it was $250 to upgrade from 2.5GHZ

  • Need Help scripting Multiple Dependencies to show hidden subform.

    I'm trying to make it so two boxes have to be checked to show a hidden subform.  I thought the script would be something like this: if (Check1.rawValue==1) && (Check2.rawValue==1){ Sub1.presence="visible"; else{ Sub1.presence="hidden"; It's not worki

  • Restore archivelog

    Hi, on 10gR2 Win 2003 Server yesterday I restored some archived logs in a new folder from RMAN backups like this : RUN   SET ARCHIVELOG DESTINATION TO 'D:\base\MABASE\Newarch';   restore archivelog FROM sequence 439 until sequence 458 ; }This morning