FireGL V3200 Driver on Windows 7

Hello everyone
I have a Thinkpad T43 with a FireGL V3200 graphic Card. Unfortunately I didn't find a driver. Does anyone know if the exists a driver?
Thanx!

Welcome to the forum!
Use the Vista driver, works well.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67663
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

ATI FireGL v5250 Driver for T60p

I am running Vista x64 on my T60p and I constantly get reports of "Problem caused by ATI Graphics Driver" pointing me to go to Windows Update or to the ATI website. Unfortunatley this is controlled by Lenovo.
When is Lenovo going to update this driver? I have the latest from the Lenovo site, but it hasn't been updated 10 months. If Lenovo does not plan to update their drivers they need to allow their mobile ATI cards to be included in ATI's generic driver list.

have you tried the latest FireGL driver from ATI? http://ati.amd.com/support/drivers/vista64/firegl-vista64.html
or, have you tried the latest WHQL driver from windows update?
if so, what were the results?
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

I can not map a network drive in window 8.1 via VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server is window server 2008 r2 and located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
Is there any error message throwed when you reconnect the mapped drive? Can you directly access the UNC path of the mapped drive? What VPN programs do you use? Please check if the VPN client connect correctly.
You could refer to the thread below to check if the AD account is restricted by VPN.
Can't access mapped drives through VPN when away from office
http://social.technet.microsoft.com/Forums/windows/en-US/a0ca41aa-08b8-4e46-a314-ffb7e401bd7a/cant-access-mapped-drives-through-vpn-when-away-from-office?forum=w7itpronetworking
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can not map a network drive in window 8.1 under VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

Lenovo G560 ... AUDIO DRIVER FOR WINDOWS XP ..

Iam using Lenovo G560 laptop for 8 months.. but just now , i formatted my system and installed WIndows XP and Windows 7... . but iam not able to install conexant audio driver on windows XP ...when i tried to install ...it says "problem with audio media" .. so anyone plzzz help me out of it sir....

try this driver
ps: new bios is available for your device.
http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_3839.html

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

How do I open an encrypted flash drive from windows

How do I open an encrypted flash drive from windows?

How was the flash drive encrypted, that is, with what system or software?

Installing office 365 Home edition on a different hard drive than windows (C:\)

Hi everyone.
I recently got an invite from a familymember to install office 365, which is great.
What's not so great is that it is not possible to customize the installation and install office on a different drive than windows.
- I am using Windows 8.1 Pro.
I've done some searching on Google and have heard about a method called click-2-run, which is basically downloading files required to a directory of choice and installing these files. However I need to generate two different xml files to use this method.
I'm know how the xml files are run together with the setup.exe file, but have very limited information about how the syntax in the xml files work.
So my question is: How do I install Office 365 on a different partition than my C-drive?
I have an E-drive with loads of space in which I've made a folder called "Microsoft Office 2015" and placed the essential click-2-run files.
- download.xml
- configuration.xml
- setup.exe
What should these files contain for me to download and install Office 365 on my E-drive?
Best regards,
Zeliax

Hi everyone.
I recently got an invite from a familymember to install office 365, which is great.
What's not so great is that it is not possible to customize the installation and install office on a different drive than windows.
- I am using Windows 8.1 Pro.
I've done some searching on Google and have heard about a method called click-2-run, which is basically downloading files required to a directory of choice and installing these files. However I need to generate two different xml files to use this method.
I'm know how the xml files are run together with the setup.exe file, but have very limited information about how the syntax in the xml files work.
So my question is: How do I install Office 365 on a different partition than my C-drive?
I have an E-drive with loads of space in which I've made a folder called "Microsoft Office 2015" and placed the essential click-2-run files.
- download.xml
- configuration.xml
- setup.exe
What should these files contain for me to download and install Office 365 on my E-drive?
Best regards,
Zeliax

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

Unable to install officejet 6100 driver on windows 7

Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise. I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there. Any help would be appreciated.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Location is not available to mapped network drive in Windows 8 using Synology NAS

Original Thread:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/location-is-not-available-to-mapped-network-drive/ca7eac5c-0e3d-494b-b488-e245978e4db9
I have recently upgraded to Windows 8.1 standard edition. I have come across a problem when using the option for mapped network drives. Under Windows 7 I would normally map a network drive (Synology NAS) and I could access all files, copy and paste, install
apps, and link media, all from within the mapped network drive. However, under Windows 8.1 I have come across a couple of problems.
1. When I try to copy a file from my "Mapped Network Drive" to the C:\Drive (OS Boot Drive), I get the following error,
"E:\ is unavailable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. if the location is on a network, make sure you're connected to the network or internet, and then try again. If the
location still can't be found, it might have been moved or deleted."
However, if I copy a file from the "NETWORK/Network Location" the file copies just fine with no problems. And, If I also copy a file from a "Added Network Location" the file also copies just fine with no problems. And, if I copy a file from
my "Mapped Network Drive" to my D:\Drive (non OS Drive), the file copies just fine with no problems.
2. When I try to install apps from my "Mapped Network Drive" they will sometimes install and sometimes not (I am also choosing the option to run the programs as Administrator). Again if I try to install using either the "NETWORK/Network Location"
or an "Added Network Location" the apps install just fine with no problems.
3. When I link media (music or videos) from my "Mapped Network Drive" they will work but once I reboot they no longer work as if they have lost the file path or link of the original source location.
4. When I use FireFox (browser) and I set my default download dir to my "Mapped Network Drive" it will work once originally set it but after I reboot, it no longer works. However, again if I set the default download dir to either the "NETWORK/Network
Location" or an "Added Network Location" the default download dir works fine even after reboot.
While I am able to access my network drive using any of the three options, "Mapped Network Drive", "NETWORK/Network Location", and "Added Network Location" but only "NETWORK/Network Location", and "Added Network
Location"appear to be reliable. Tbh I would prefer to be able to use my "Mapped Network Drive" in Windows 8 as I have been able to under Windows 7.
More info:
I currently have UAC set to "Never Notify".
I also have Windows 8.1 installed on three different systems and all of them give me the same exact problems. One of the systems is a completely clean install with no 3rd party apps installed.
Just so its clear I am able to access the "Mapped Network Drive" but unfortunately this method of access appears to be unreliable in Windows 8 but in Windows 7 it works flawlessly.
If I map a network drive from another pc running windows 7 or 8, I can access and use the mapped drive with no problems. This problem appears to be related to the Synology NAS devices and I have researched the Synology forums but only found one thread about
the problem, here:
http://forum.synology.com/enu/viewtopic.php?f=49&t=76687
I have searched several forums and attempted to pick the brains of my local computer shops for any incite on this problem but I have been unable to find a solution/fix.
Any help resolving this is greatly appreciated.

Hi,
Based on your description, we can temporarily disable the firewall to see whether the issue persists.
For this issue seems related to the Synology NAS devices, in order to get professional help regarding the product, we can contact the vendor support to see whether the issue
can be fixed.
Best regards,
Frank Shen

Satellite U200-115 - CD Rom error - can't activate the drive from windows

Hi everyone,
I'm having some problems with my DVD rewriter drive on my Satellite U200-115.
It works very intermittently and whenever I power up the machine, the first notice I get is 'cd-rom error' even though there is no disc in the drive.
I can't activate the drive from windows either (icon in system tray).
There is the odd occassion when the drive does work in windows but this is so infrequent that I can't remember the last time (I think it was back in Nov 08).
I want to restore the system as I am getting a lot of windows file icons instead of the proper icons for images e.g. pdf, doc, etc. but am worried that the drive wont read the disc or will stop working during the recovery process.
Any ideas would be gratefully received.
Best WIshes
Nick

If its a software issue the drive will not stop working during the recovery procedure.
Do you get a CD-ROM error in Windows?
You could try to boot from a Linux boot disk. If this work it would be a software problem and not a hardware problem.
Maybe this article from the Microsoft Knowledge Base can help you:
http://support.microsoft.com/kb/314060

FireGL V3200 Driver on Windows 7

Similar Messages

Maybe you are looking for