Firewall config file size

I am trying to upload config file size of 14MB on ASA 5550.I know pix can go upto maximum 2 MB as recommended by Cisco,but for ASA there is no document I could find about the recommended size.When i am uploading 14 MB on ASA is crashing.Can anybody suggest how to go abt this file size.

Hi,
Are you trying to upload all config file including images/packages or just the config itself? What error messages did you see and whether the device crash during upload or after reboot (with the new config)? What is the available space?
Have you check the cache?
Hostname(config-webvpn)# dir cache:/
Tried to increase the cache?
Hostname(config-webvpn)# cache-fs limit [size from 1MB to 32MB]
Regards,
Dandy
What is the available space in the FLASH?
Did you try to increase

Similar Messages

  • Maximum size video upload settings in web config file

    Hi, i am providing video support in my application, whereas i need to provide support to upload video without any size limit, say for example atleast 1GB video should be uploaded and played via html5 and iframe tag. I have made some changes in web config
    file like maxrequestlength attribute and maxallowedcontentlength attribute set to support maximum of 1 GB video. But it does not affect my application in anyway. Any suggestions please??

    This forum supports setup of the .NET Framework itself.
    As you question concerns configuration of a web application, I recommend that you ask here:
    http://forums.asp.net/26.aspx/1?Configuration+and+Deployment

  • How to set option in Scanning for Reduced File Size

    I am scanning from a Fujitsu 6230 scanner in Adobe Acrobat Standard 9.4.1. My scanning options are Color, 300DPI,Letter, High Quality, with Optimization options of Custom Settings of JPEG for Color/Grayscale. The scanned files are very large...1852KB per page. After using the Reduce File Size option and selecting Acrobat 8 and later, the file size is reduced to 187K. Is there a way to preset the Acrobat 8 or later setting....rather than having to do the two-step?
    Also, if I use Fujitsu's scanning interface I get far higher quality pdf's,  with small file sizes, and lower scanning resolution......but without the option to append to a pdf, an option I use frequently. Apparently their program for converting the scanned image to a pdf is more robust than Adobe's. Is there a way to use their image->pdf engine within Acrobat?

    Hi Boatseller,
    I will put this in simple way.
    Can we set properties in biztalk wcf_custom adaptor like 
    1. <security authenticationMode="UserNameOverTransport" 
    2. enableUnsecuredResponse="True" 
    or 
     includeTimestamp="false"
    3. <textMessageEncoding
    messageVersion="Soap11"/>
    <httpsTransport/>
    I am unable to find these properties in BizTalk wcf_custom adaptor properties. It will be great help if you could guide me in right direction . My problem is to receive response message into orchestration which is not having header. But the response is coming
    from web service. I saw that in fiddler.
    Also, If there is any steps to make these properties available in machine config, please share 
    Thanks in advance
    Vivek

  • Maximum file-size for HR EIC emails

    Hi folks
    We currently use EIC in ERP, and have an issue with sending large emails/attachments as the maximum file-size appears to be only 2MB. This is set in the IMG activity Employee Interaction Center (EIC) -> Interaction Center Web-Client -> Communication Channels ->E-Mail -> Define E-Mail Profiles, the attachment maximum size is set to a maximum of 2,147,483 bytes.
    I have tried searching for anyone else having a similar problem, but haven't found anything. I would imagine many customers would have EIC users in a Shared Services environment sending attachments over 2 meg; so before we log a call with SAP, has anyone else had this issue and how did you resolve it?
    Thanks very much.
    James

    The maximum value is 2,147,483 bytes, which is what the config is set to. This seems pretty low, especially in this day and age.

  • AS2 decryption error on file sizes greater than 5MB.

    We have a client who is not using biztalk but transmitting files to us via AS2. The AS2 file transmission occurs seamlessly when the file size is below 5MB, but Biztalk AS2 decoder fails to decrypt when file size exceeds 5MB. After searching the forums,
    I learned that this is a known issue and there is a  hot fix available to fix that issue. I wanted to replicate the same issue in my test environment so that i can apply the hot fix in that environment and make sure nothing breaks. I replicated the AS2
    setup in 2 biztalk test machines . I used one machine as partner A and the other as partner B, then transmitted AS2 files from partner A to partner B. I sent  files with sizes 2MB, 5MB, 15MB, and 50MB, but partner B received all the decrypted files successfully.
    Production servers and test servers have biztalk 2010 installed.
    In conclusion, the decryption issue is occurring in production machine only, and I am unable to replicate that issue in our test servers. I am scared to apply the hot fix or CU5 directly in production. Please advise if there is something else i am missing. 
    Thank you.
    Error message:
    Error details: An output message of the component "Microsoft.BizTalk.EdiInt.PipelineComponents" in receive pipeline "Microsoft.BizTalk.EdiInt.DefaultPipelines.AS2Receive, Microsoft.BizTalk.Edi.EdiIntPipelines, Version=3.0.1.0, Culture=neutral,
    PublicKeyToken=31bf3856ad364e35" is suspended due to the following error:
    An error occurred when decrypting an AS2 message..
    The sequence number of the suspended message is 2
    Hot fixes to fix the issue:
    http://support.microsoft.com/kb/2480994/en-us
    For some people CU5 fixed the issue.
    Dilip Bandi

    First, make sure CU5 wasn't unintentionally applied by Windows Update to your test config.
    Second, either way, a valid strategy would be to apply CU5 as a normal patch, meaning DEV->TEST->UAT->PROD (or whatever your promotion path is).  That way, you'll test for any breaking changes anyway and if the AS/2 issues isn't fixed, well,
    you really no worse off.

  • SQL Azure Reporting - There was an exception running the extensions specified in the config file. --- Maximum request length exceeded.

    I am trying to deploy an RDL file (5MB) to SQL Azure Reporting server in South Central US using the deploy function in SQL Server Data Tools but facing the following error during deployment to Azure Reporting server.
    "There was an exception running the extensions specified in the config file. ---> Maximum request length exceeded."
    Is there any limit on the size of RDL files which can be deployed to Azure Reporting server? I have seen some online posts which talk about increasing the maxRequestLength in httpruntime of web.config in Reporting server. But in case of Azure Reporting server
    how can be make modification to this configuration?
    I have tried to upload it directly to SQL Azure Reporting server from the Management Portal --> Upload Report function which still resulted in error.
    Thanks & Regards, Deep

    Thanks for your question. Unfortunately we are in the process of deprecating SQL Reporting services.  Full details are available at http://msdn.microsoft.com/en-us/library/gg430130.aspx
    Thanks Guy

  • Maximum File size in XI

    I have 100 MB file to be transferred through XI.
    How to check maximum file size limit in XI server.
    Is thier any tcode for the same?

    Hi ViJaYaNt JhA ,
    File size depends on your Java Heap (Java heap depends on your Hardware Config).Basically SAP recommends a size of 5 Mb.
    you can try the quicksizer tool on http://service.sap.com/quicksizer.
    Also update the HTTPProvider service on the Java server dispatcher to have the parameter MaxRequestContentLength = 800M
    The ABAP parameters icm/HTTP/max_request_size_km set to 2097152, icm/server_port_0 TIMEOUT set to 600. rdisp/max_wprun_time = 3600, ztta/max_memreq_MB =2048.
    In SXMB_ADM  add the parameter TUNING EO_MSG_SIZE_LIMIT = 40M
    Best way would be splitting technique.
    Splitting the file before it enters XI would considerably reduce the load on XI.
    please refer the following links
    The specified item was not found.
    Refer this blog
    Night Mare-Processing huge files in SAP XI
    one more suggestion is:
    Increase Current Value of the Parameter Nmame : rdisp/max_wprun_time
    using Tcode RZ11 and try to process.
    I think it is possible to process files Sizes up to 50 Mb.
    Refer Note 807000 ,File Adapter: SAP Note 821267.
    Regards,
    Vinod.

  • Hi, My places.sqlite file size is 30,720 KB have I reached the maximum size, is there even a maximum size for this. Visited links are no longer changing color.

    Hi,
    My places.sqlite file size is 30,720 KB have I reached the maximum size, is there even a maximum size for this.
    Suddenly the visited links are no longer changing font color, as I am preparing for an exam I need visited questions to change color, to keep track of questions that I have finished. But if I delete a few days of history then again,a few more visited links change color then again it stops, so it seems something is getting full and not able to accommodate any more? Why are my visited links no longer changing color after a certain number of visits? I do have a back up of the places.sqlite file. So I have tried everything from deleting the profile, uninstalling reinstalling, creating a new profile, then copy pasting places.sqlite etc, but as mentioned after a few visits, visited links no longer change color, if I delete a few days of history then again a few visits will again change color and then stop again, so what should I increase so that my visited links quota is increased, I have also tried tweaking about:config and it has had no result. Although I was not really confident that increasing brower.history_max _pages (don't remember exact name, but I am sure you get the idea) is going to help.
    Seems as though my visited links change color, quota is full and only if I delete a few days of history will I get a few more visited links to change color. Can somebody shed some light? As mentioned my places.sqlite file size is 30,720 KB so I think perhaps this has something to do with this? Would really appreciate if someone could help. Thank you.

    There is no maximum for the places.sqlite database and other SQLite database files like I wrote above.<br />
    All SQLite database file have fixed minimum sizes and if they run out of space they are automatically increased in size with a specific chunk size. For places.sqlite this is 10 MB for the minimum and for the chunk.
    *Bug 581606 - Avoid sqlite fragmentation via SQLITE_FCNTL_CHUNK_SIZE

  • Premier Pro File Size

    I am new to Premier Pro and after creating my first video with this software I realize the file size is HUGE!
    100mb+
    What are you guys using to compress your files for internet distribution?
    Thanks!

    Hey! I install routers on T1lines all the time. It is what I do for a living on my day job. Unless they are using MPLS to route through a centralized firewall, then 1.5Mb/s should be fast enough for most locations with less than a dozen people or so, even if they are routing VoIP. At least that should be the case if the traffic shaping is set correctly. Unless they all want to watch the videos at the same time.
    As for sacrificing, you missed the third leg of the stool. Frame size. With a smaller frame size it is possible to reduce the bit rate without sacrificing quality.  It depends on the content of course. Training calls for bigger frames. A word from the CEO just needs to be big enough to see his/her facial expressions.
    That said, the Vimeo presets produce a pretty decent video. However, I see a problem with your settings.
    First of all, 720X480 is a frame size designed for non square pixels. If you change over to 640X480 you will have a true 4:3 frame. I thought you would have wanted a 16:9 frame. If you truly want a 1280X720 (720p) setting, then you need to go with a different preset. Also, I recommend that you deinterlace the export, meaning go progressive instead of using the DV NTSC setting. So select one of the 720p presets.
    Try the Vimeo 720p preset. That gave me 38,954KB at a data rate of 5Kb for a one minute video (00;01;00;02) with a frame size of 1280X720 progressive instead of deinterlaced.
    The Vimeo SD widescreen preset gave me a 16,976KB file at a 2K data rate with a frame size of 640X360.
    Neither are terribly small by standards I used a decade ago, but I assume better PCs and a faster connection than I did back then. If you really think that 10Mb is too big for a one minute video, I highly recommend that you reconsider. To get 60 seconds of video that was already compressed pretty tight and was still a file of just about 200MB (using HDV at 25Mb/s as a source) down to one twentieth of that, you really have some hurdles.
    To get it down even farther recalls the day I wanted to put a video of Arlo Guthrie on my web site so I cut the frame rate to 15 frames per second and exported a frame size of only 160X120 and achieved a 1.6MB file with a duration of 4:28 at a data rate of 17Kbp/s. http://www.stevengotz.com/videos/arlo_8.wmv
    Download it to play in Windows Media Player if you want to see what I mean - don't play it in a browser. It just doesn't look right. One of these days I need to find that tape and post it at full 480p. I really love that guy.

  • AzureDiagnostics fails after role udpate with no changes to configuration, error "Failed to parse the WAD config file"

    Windows event log shows AzureDiagnostics errors "Failed to parse the WAD config file" and warning "
    No certficate with given thumbprint found in the certificate store. Thumbprint:" and
    System.ArgumentNullException: Value cannot be null.
    Parameter name: s
       at System.IO.StringReader..ctor(String s)
       at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
       at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
       at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
    Also tried a different deployment on a different subscription, same issue, and this one gets stuck in 'create' state with no roles showing up in 'instances' section for quite some time. Are Cloud Services even maintained by Microsoft
    anymore? Seems that they are second class citizens to VMs, no updates, no new portal, no new features, often can't update single role without updating all roles, etc.

    i am facing same error : here is the log:
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticPlugin.exe DiagnosticPlugin-ShutdownEvent DiagnosticPlugin-TotalShutdownEvent -wadVer1v3
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticsPlugin
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RcfFileName: C:\Config\881bb2e524c04870b4e993fd8fefb7d8.881bb2e524c04870b4e993fd8fefb7d8.WorkerRole1_IN_0.13.xml
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RoleInstanceId: WorkerRole1_IN_0; DeploymentId: 881bb2e524c04870b4e993fd8fefb7d8; RoleName: WorkerRole1
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Store Size: 4096
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Reading XML configuration file
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Will use thumbprint 
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Decrypting private configuration
    DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:00:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Retrying after 30 seconds. Retry attempt 1
    DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:09 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:09 PM] Retrying after 30 seconds. Retry attempt 2
    DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:39 PM] Retrying after 30 seconds. Retry attempt 3
    DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.Security.Cryptography.CryptographicException: The enveloped-data message does not contain the specified recipient.
       at System.Security.Cryptography.Pkcs.EnvelopedCms.DecryptContent(RecipientInfoCollection recipientInfos, X509Certificate2Collection extraStore)
       at Microsoft.Azure.Plugins.Diagnostics.dll.PluginConfigurationSettingsProvider.DecryptPrivateConfig(String encryptedConfig)
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] WadCfg is provided in initial configuration. Using that to initialize Diagnostics.
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] <PublicConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
      <WadCfg>
        <DiagnosticMonitorConfiguration overallQuotaInMB="4096">
          <DiagnosticInfrastructureLogs />
          <Directories scheduledTransferPeriod="PT1M">
            <IISLogs containerName="wad-iis-logfiles" />
            <FailedRequestLogs containerName="wad-failedrequestlogs" />
          </Directories>
          <PerformanceCounters scheduledTransferPeriod="PT1M">
            <PerformanceCounterConfiguration counterSpecifier="\Memory\Available MBytes" sampleRate="PT3M" />
            <PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\ISAPI Extension Requests/sec" sampleRate="PT3M" />
            <PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\Bytes Total/Sec" sampleRate="PT3M" />
            <PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Requests/Sec" sampleRate="PT3M" />
            <PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Errors Total/Sec" sampleRate="PT3M" />
            <PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Queued" sampleRate="PT3M" />
            <PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Rejected" sampleRate="PT3M" />
            <PerformanceCounterConfiguration counterSpecifier="\Processor(_Total)\% Processor Time" sampleRate="PT3M" />
          </PerformanceCounters>
          <WindowsEventLog scheduledTransferPeriod="PT1M">
            <DataSource name="Application!*" />
            <DataSource name="System!*" />
          </WindowsEventLog>
          <CrashDumps dumpType="Full">
            <CrashDumpConfiguration processName="WaAppAgent.exe" />
            <CrashDumpConfiguration processName="WaIISHost.exe" />
            <CrashDumpConfiguration processName="WindowsAzureGuestAgent.exe" />
            <CrashDumpConfiguration processName="WaWorkerHost.exe" />
            <CrashDumpConfiguration processName="DiagnosticsAgent.exe" />
            <CrashDumpConfiguration processName="w3wp.exe" />
          </CrashDumps>
          <Logs scheduledTransferPeriod="PT1M" scheduledTransferLogLevelFilter="Verbose" />
        </DiagnosticMonitorConfiguration>
      </WadCfg>
      <StorageAccount>vinaystorageaccounttest</StorageAccount>
    </PublicConfig>
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] Private setting is loaded
    DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.ArgumentNullException: Value cannot be null.
    Parameter name: s
       at System.IO.StringReader..ctor(String s)
       at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
       at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
       at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
    DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] Failed to parse the WAD config file
    DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] DiagnosticPlugin.exe exit with code -106

  • How to use a config file?

    People,
    i have a basic question. How to extract the contents from a ".config" file?
    I have a config file with few sections and few global variables defined.
    how to extract these data; or how to use this file?
    a sample .config file, that i have is,
    # global variables
    pageTitle = "Main Menu"
    bodyBgColor = #000000
    tableBgColor = #000000
    rowBgColor = #00ff00
    [Customer]
    pageTitle = "Customer Info"
    [Login]
    pageTitle = "Login"
    focus = "username"
    Intro = """This is a value that spans more
    than one line. you must enclose
                   it in triple quotes."""
    # hidden section
    [.Database]
    host=my.domain.com
    db=ADDRESSBOOK
    user=php-user
    pass=foobar
    How would i extract these data; or how to utilize this file first of all?
    - Kumar
    [ [email protected] ]

    Hi Kumar,
    Instead of .config file you can use .properties file. Place the configuration part in that file. Use ResourceBundle class. This class have methods like getResourceString(String key) which reads the .properties file and returns a String as it's Value. I normally use the same. I have written one class for it. C if you can use it. The keys are case sensitive. initialize is a directory in which i am keeping my Config.properties file.
    import java.util.*;
    import java.text.*;
    import java.net.*;
    import javax.swing.*;
    public class ReadConfig
    public static ResourceBundle resources;
    * This is responsible for getting data from Config.properties for setting properties externally.
    static
    try
    resources = ResourceBundle.getBundle("initialize.Config", Locale.getDefault());
    catch (MissingResourceException mre)
    JOptionPane.showMessageDialog(new JFrame(), "initialize/Config.properties not found.\n Please report it to administrator.");
    System.err.println("initialize/Config.properties not found");
    System.exit(1);
    }//static
    public ReadConfig()
    System.out.println(getResourceString("DatabaseName"));
    System.out.println(getResourceString("JDBCDriver"));
    System.out.println(getResourceString("DSN"));
    System.out.println(getResourceString("ConnectionString"));
    }//constructor
    public String[] tokenize(String input)
    Vector v = new Vector();
    StringTokenizer t = new StringTokenizer(input);
    String cmd[];
    while (t.hasMoreTokens())
    v.addElement(t.nextToken());
    cmd = new String[v.size()];
    for (int i = 0; i < cmd.length; i++)
    cmd[i] = (String) v.elementAt(i);
    return cmd;
    * A method takes string as parameter and reference of ResourceBundle.
    * It is used with <b>Resources Bundle</b> i.e. with .properties file.
    * When value of particular string from .properties file has to retrive.
    public String getResourceString(String nm, ResourceBundle resources)
    String str;
    try
    str = resources.getString(nm);
    catch (MissingResourceException mre)
    str = null;
    return str;
    * A method takes string as parameter. It is used with <b>Resources Bundle
    * </b> i.e. with .properties file. When value of particular string from .properties
    * file has to retrive.
    public static String getResourceString(String nm)
    String str;
    try
    str = resources.getString(nm.trim());
    catch (MissingResourceException mre)
    str = null;
    return str;
    }//getResourceString(String nm)
    * This method takes string as parameter and returns corresponding <b>URL</b>.
    * If key is <b>null</b>, then will return <b>null</b>.
    public URL getResource(String key)
    String name = getResourceString(key);
    if (name != null)
    URL url = this.getClass().getResource(name);
    return url;
         return null;
    }//getResource(String key)
    public static void main(String[] args)
    new ReadConfig();
    }//main
    }//class
    Hope this will be helpful to you.
    Kind Regards
    Sandeep

  • Firewall-config cannot change firewall zones of NetworkManager conns

    I have been playing around with firewalld and firewall-config recently to try to harden up my laptop.
    My regular user account is in group wheel, and I have polkit set up.  So, any administrative tasks prompt me for my password.  I can configure networks with NetworkManager (and even set a firewall zone from within NetworkManager).  And with a password, I can modify firewalld rules.
    However, if I attempt to change the firewall zone of a network connection (either under Options > Change Zones of Connections... or by left-clicking on firewall-applet), I get the following stackdump:
    Traceback (most recent call last):
      File "/usr/bin/firewall-config", line 1007, in change_zone_connection_editor
        editor.run()
      File "/usr/bin/firewall-config", line 5301, in run
        settings = connection_obj.GetSettings()
      File "/usr/lib/python3.4/site-packages/dbus/proxies.py", line 70, in __call__
        return self._proxy_method(*args, **keywords)
      File "/usr/lib/python3.4/site-packages/slip/dbus/proxies.py", line 51, in __call__
        return dbus.proxies._ProxyMethod.__call__(self, *args, **kwargs)
      File "/usr/lib/python3.4/site-packages/dbus/proxies.py", line 145, in __call__
        **keywords)
      File "/usr/lib/python3.4/site-packages/dbus/connection.py", line 651, in call_blocking
        message, timeout)
    dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 8 matched rules; type="method_call", sender=":1.78" (uid=2290 pid=4997 comm="/usr/bin/python -Es /usr/bin/firewall-config ") interface="(unset)" member="GetSettings" error name="(unset)" requested_reply="0" destination=":1.6" (uid=0 pid=1461 comm="/usr/bin/NetworkManager --no-daemon ")
    So, it is some permission problem.  If I run firewall-config as root and try again, everything works as intended.  So, I think this is DBUS or Polkit configuration problem.  Is there some way to determine why access is denied or what DBUS call is being attempted?  I have tried dbus-monitor and d-feet, but I still can't find the call the fails.  (I have never had to troubleshoot DBUS calls before, so I'm quite confused as is.)
    What's weird is I can change the firewall zone of the network configuration using nm-connection-editor.  So is this bug in how firewall-config and NetworkManager communicate?
    Any advice on which permissions to check would be greatly appreciated.

    Hi Kristian.
    The problem in my case was the RRAS/Gateway system was no longer available.  Unfortunately, VMM still "wanted" to connect to it to complete the removal; regardless of the dependency order.  (BTW, I was trying to remove objects in the
    correct order.)
    I expect VMM should be enhanced to allow objects, such as the ones I had, to be removed if the communication with the backing system fails.  Say, a warning/confirmation/force popup with the GUI, or something somilar for the various PowerShell cmdlets.
    - Mark

  • ACE4710 Show crypto files displays file size mismatch

    For some reason when I compare backup and active ACE4710 certs size I have a size mismatch on 2 certs. I have done everything I can think of to elimanate this mismatch in size. I start off on the active with crypto import terminal xyz.pem which then a show crypto files displays as say 1800 then through a console session with putty I attach to the backup where i use the export from the master and run the same import command then show crypto file again where there is a  significant file size difference. Could this be as a result of the serial connection versus the telnet session otherwise on the master? I know that the master is using the correct file size cert as it is up and tested where unless I do a failover to the backup I do not know the cert will work and as well crypto verify shows both sets match on active and backup?  Right now I am in a warm standby state for ft as a result. Thanks.

    Hi,
    Figured out a fix. What I later came to realize is that I had originally uploaded through FTP the key and cert pem as one file which then the system seperated (with an ultimate  file size based on this procedure) did not later match my copy and paste import file size for the two already seperate files. As well I was very carefull about white space and verify was done on both active and backup ACEs and the key pair in question. I was able to fix the problem by exporting from the copy and paste version and then re importing to the other device also through the terminal then use the new ones in the SSL proxy config for the pair in question. Then delete the FTP uploaded cert and key.Thanks for your help.

  • Update file size mismatch error code U43M1D204

    I had Creative Suite 6 Master Collection installed yesterday, about seven updates notification appeared, they were done successfully except for Photoshop Camera Raw and Media Encoder
    I tried the workaround in this thread, i deleted AAM update folder, but no use
    http://forums.adobe.com/message/3864845#3864845
    i went to log file aamu.log and found the error messages:
    2012-08-17T16:20:29: connecting to: = http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeMediaEncoderCS6-6/6.0.1/Setup.dmg
    2012-08-17T16:20:30: ThreadDownloadUpdates:: Need to download a .sig file for this dmg at: /Users/bahaelaila7/Library/Application Support/Adobe/AAMUpdater/1.0/Install/AdobeMediaEncoderCS6-6/6.0.1/Setup.sig
    2012-08-17T16:20:30: ThreadDownloadUpdates:: downloading .sig file from : http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeMediaEncoderCS6-6/6.0.1/Setup.sig
    2012-08-17T16:20:31: ThreadDownloadUpdates: ERROR: File Size Mismatch, between what is given in manifest and what is that of bob.
    2012-08-17T16:20:31: UCGetprogress : WARNING - Download failed due to file size mismatch at server.
    2012-08-17T16:20:31: UCGetprogress : Updates download returning state for reffId  = AdobeMediaEncoderCS6-6/6.0.1
    2012-08-17T16:20:31: UCGetprogress : Updates download returning state     = 43
    2012-08-17T16:20:31: UCGetprogress : Updates download returning outError  = 204
    2012-08-17T16:20:31: UCGetprogress : Updates download returning percent   = 0
    2012-08-17T16:20:31: UCGetprogress : Updates download returning unique error code string   = U43M1D204
    2012-08-17T16:20:31: UCGetprogress : Updates download reporting headlight data for error code. = 204
    2012-08-17T16:20:31: Check for Updates was done successfully.
    2012-08-17T16:20:31: UCGetprogress : Check for updates returning state for reffId  = AdobeMediaEncoderCS6-6/6.0.1
    2012-08-17T16:20:31: UCGetprogress : Check for updates returning state     = 21
    2012-08-17T16:20:31: UCGetprogress : Check for updates returning outError  = 0
    2012-08-17T16:20:31: UCGetprogress : Check for updates returning percent   = 100
    2012-08-17T16:20:31: UCGetprogress : Check for updates returning unique error code string   = U21M1C0
    2012-08-17T16:20:31: UCGetprogress : WARNING - Download failed due to file size mismatch at server.
    2012-08-17T16:20:31: UCGetprogress : Updates download returning state for reffId  = AdobeMediaEncoderCS6-6/6.0.1
    2012-08-17T16:20:31: UCGetprogress : Updates download returning state     = 43
    2012-08-17T16:20:31: UCGetprogress : Updates download returning outError  = 204
    2012-08-17T16:20:31: UCGetprogress : Updates download returning percent   = 0
    2012-08-17T16:20:31: UCGetprogress : Updates download returning unique error code string   = U43M1D204
    2012-08-17T16:20:31: UCDownloadUpdates : (A) UCIsSelfUpdateAvailable API returned value = 0
    2012-08-17T16:20:33: Returning from << UCDownloadUpdates >> call with outErr value = 0
    2012-08-17T16:20:33: ThreadDownloadUpdates: Downloading installer for update refID: PhotoshopCameraRaw7-7.0/7.1.71
    2012-08-17T16:23:34: connecting to: = http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.1.71/Setup.dmg
    2012-08-17T16:23:35: ThreadDownloadUpdates:: Need to download a .sig file for this dmg at: /Users/bahaelaila7/Library/Application Support/Adobe/AAMUpdater/1.0/Install/PhotoshopCameraRaw7-7.0/7.1.71/Setup.sig
    2012-08-17T16:23:35: ThreadDownloadUpdates:: downloading .sig file from : http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.1.71/Setup.sig
    2012-08-17T16:23:36: ThreadDownloadUpdates: ERROR: File Size Mismatch, between what is given in manifest and what is that of bob.
    2012-08-17T16:23:36: UCGetprogress : WARNING - Download failed due to file size mismatch at server.
    2012-08-17T16:23:36: UCGetprogress : Updates download returning state for reffId  = PhotoshopCameraRaw7-7.0/7.1.71
    2012-08-17T16:23:36: UCGetprogress : Updates download returning state     = 43
    2012-08-17T16:23:36: UCGetprogress : Updates download returning outError  = 204
    2012-08-17T16:23:36: UCGetprogress : Updates download returning percent   = 0
    2012-08-17T16:23:36: UCGetprogress : Updates download returning unique error code string   = U43M1D204
    2012-08-17T16:23:36: UCGetprogress : Updates download reporting headlight data for error code. = 204
    2012-08-17T16:23:36: UCIsSelfUpdateAvailable : Function returned with value =>  = 0
    2012-08-17T16:23:36: UCIsSelfUpdateAvailable : Is BOB downloaded =>  = 0

    I don't think it is related to firewall/security, because other updates for flash, dreamweaver and others updated successfully.
    I had the same issue with one of Dreamweaver CS5.5 updates, it wouldn't update no matter how many times i redownload (using Adobe Updater).
    one aspect is that, it takes its time downloading updates, but fails upon applying them, so links (accessing web) is not an issue here.
    Also, looking at the error message, it says file size mismatch, and it appeard just ONE second after trying to download sig files
    it's possible that, either sig file size mismatches what's written in webfeed file (or whatever "manifest" file as referred to in log),
    or
    dmg file size as written in sig file does not match the one dowloaded. as sig (signature) files are small, around 5k each. (could have been downloaded in less than one second).
    I don't know why I haven't seen anyone else complaining from the same problem, though seemingly sig files are the same for same dmgs.
    Or, I could have been the first to complain, and what I did worked for them too, hopefully

  • Chat can not send because of the file size?

    Hi,
    Using Cisco Call Center system and cisco agent program. The problem is:
    Agent(s) can not chat! The basic solution is: Delete the txt file(s) writings in C:\Programfiles\Cisco\Desktop\Log\Transections\Friday.txt
    and then agent(s) can chat again.
    I saw the file:
    C:\Programfiles\Cisco\Desktop\config\Agent.cfg
    Size=3000000
    is the size log file size or something else?
    Can u help us me to solve the problem? Thanks.

    Hi Cadennguyen,
    If there was an issue with the last purchase and you have just redeem that iTunes credit, then you can pay that unpaid balance with that credit. Take a look at the article below for more information. 
    Pay an unpaid balance in the iTunes Store
    http://support.apple.com/en-us/HT203005
    Take care,
    -Norm G. 

Maybe you are looking for

  • Can't sign out of my previous Apple ID

    I changed my Apple ID and now with my new phone when I restored a backup the old ID is still in there and I can't sign out of the old ID to log into the new one as the password does not work! I've even tried to change the ID back to the old email on

  • Reminders in ical

    I have a reminders list synced between my iphone and my computer. For some reason, I can't complete or edit certain reminders on my computer that I created in my iphone. If I update the event in my iphone - it will update on the computer - but I can'

  • Partner function;Partner procedure; Partner object; Procedure assignment??

    Hi, If we check T-code: VOPA, we could find below: Partner function(Partner type inside); Partner procedure;Procedure details;Procedure assignment; Partner object(Customer Customer Master;Sales Document Header Sales Document Item..etc) Account Group;

  • Balance Sheet Planning - FOX

    Hello. We are designing Balance Sheet planning in BPS and would like to use FOX for some of the calculations.  One of the calculations will be for Trade Receivables.  It will be calculated as: Trade Receivables = Net Sales Revenue * DSO DSO calculate

  • External Server Configuration

    We have an internal Crystal Enterprise 10 server that we can connect to using Crystal Reports 10 .NET on just about any old internal server we try (all Server 2003). The second we remove the web server from the domain and move that server outside the