Firewall error now won't turn on

last night i received the firewall error message, and today my nano will not turn on. i've checked everything, but nothing is working. when i plug it into my computer, the screen flashes blank once,and then goes black again. the 5 r's did nothing. what should i do?
ipod nano first generation   Windows XP  

Ouch! That really stinks
I would contact AppleCare or make an appointment for your local Apple Store.
At this point, i believe your phone is just dead. Its possible the power brick was badly manufactured or something of the like, so make sure you also get the cord and power brick replaced.
Good luck!

Similar Messages

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

  • Was playing the Ipod and it went black and now won't turn on

    was playing the IPod touch with camera and it went black in the middle of a game ans now won't turn on.

    After charging for half an hour, reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    If it now works you are done.
    - Connect it to the computer.  If it appears in iTunes restore the iPod
    - If not seen, see if placing he iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • IPod touch stopped working when charging now won't turn on at all

    iPod touch stopped working when charging now won't turn on at all

    Try in order:
    - After charging or half an hour, reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Connect the iPod to the computer and if it shows in iTunes, restore the iPod via iTunes.
    - See if placing the iPod in recovory mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • HT201401 my iPhone 5 randomly switched itself when somebody was calling me and now won't turn on. it had 90% battery, I've tried factory reset, connecting to iTunes and nothing works. the phone is approx 18 months old so surprise surprise out of warranty.

    my iPhone 5 randomly switched itself when somebody was calling me and now won't turn on. it had 90% battery, I've tried factory reset, connecting to iTunes and nothing works. the phone is approx 18 months old so surprise surprise out of warranty.

    My 5S just started doing this on Thursday: every fraction of a second or so it oscillates between connecting and disconnecting with the charger (USB or wall, doesn't matter). Since it's still under the limited warrantee, I took it to the local Mac dealer (I live in a small town w/out an Apple store) and they shipped it off. I'm waiting now for the replacement--telephonless, too!
    What concerns me is that many people seem to be having this issue.
    You were right to be suspicious of the Apple store employees. Once they replicated the behavior that you experienced, they should have immediatly offered to exchange your phone. Anything else, in my opinion, is unacceptable. As long as your phone is still doing it, I'd go back, ask for the manager and tell them to exchange your phone.

  • Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

    Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
    Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
    Thanks for your assistance.

    If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

    I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

    If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.

  • ZEN Micro won't turn Off and now won't turn

    Hi Everyone, hope you can help me out here.
    I have been using my ZEN micro for about week now and it was at first working fine.
    Then it started not turning off, so i had to pull out the battery.
    This is obviously very annoying, but it got worse over time.
    It now won't turn on unless i switch it about 30-40 times.
    What is going on, is there a way to fix it and is anyone experiencing the same problem?
    Thanks very much,
    Fern

    FernIe, I have the exact same problem, although now my Zen Micro won't turn on at all via the switch.
    My Zen Micro is 5 months old and its only been over the past few weeks I've been having problems. It started with having to hold the switch in the power on position for a least 30 secs and trying it at least 5-0 times before the player would turn on, and having to remove the battery to turn it off. Now, not matter how many times I try the switch or how long i hold it for, the player won't turn on.
    The battery is fully charged and I have never had problems with the headphone jack, and I haven't dropped it or done any damage to it that I think could be causing it. I'm having to turn it on by plugging it into my computer through the USB cable and then unlpugging it once its on, it's a pain doing this and means if I want to use it later I have to keep it on, muted, in my bag all day with the lock turned on (that end of the switch works) then once its turned off I can't turn it on again until I get near a computer again.
    I've searched the discussions and knowledge base but haven't found an answer. I've just emailed the support team and I'm waiting for their response, would be interested to know what they've told you.
    Just letting you know your not alone and I feel your pain!
    Jen

  • I plugged my phone in my computer to download my pictures once it finished downloading I unpluged my phone and it went black and now won't turn back on. Please help me!!

    I plugged my phone in my computer to download my pictures once it finished downloading I unpluged my phone and it went black and now won't turn back on. Please help me!!

    Reset, hold both home and power buttons for about 10 seconds until the iPhone begins to start.

  • My MacBook Pro shutdown after it said my USB was draining to much power and now won't turn on please help

    Hi my MacBook will not turn on after it said my USB was draining to much power, and it shut down and now won't turn back on please help

    USB power management is part of the SMC (system management controller).  Try to reset SMC: http://support.apple.com/kb/HT3964
    Then get a self-powered USB external hub.  It takes power from a wall socket and saves the MBP power system.  Starting at $20 at BestBuy and similar stores.

  • MacBook Pro turned off on its own and now won't turn back on.

    MacBook Pro turned off on its own and now won't turn back on.  Battery had 41% just before this happened and green indicator on power cord is showing, so it seems like it's charging.  What should I do?

    The led on the power adapter should be amber if it is charging.  Green just indicates that it is supplying power to the MBP.
    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    Ciao.

  • My brand new MacBook pro charged last night but now won't turn on, help!

    My MacBook pro charged fully last night but now won't turn on, the green battery light is flashing but no matter how long I hold the power button it won't start. I just bought the MacBook in January.

    Well then it isn't really Brand New. Brand New kinda means you bought it yesteerday or 2-3 days ago.
    In any event youy need to take it to Apple and have them fix or replace it.
    You have a hardware problem that only Apple can fix.

  • My baby bit down on my iphone 4. It now won't turn on. There is no visible damage. It won't trigger itunes or restore with the usual hold/home technique. Any ideas?

    My baby bit down on my iphone 4. It now won't turn on. I tried charging it, using the hold/home technique, and plugging into itunes. itunes won't recognise it and nothing is working. Any ideas?

    Try this:
    Your phone is off...correct?
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you(hopefully) see “Connect to iTunes” on the screen. You may now release the home button.
    If that doesn't work...it's a trip to the Apple store. An out of warranty replacement is US $149 if a hardware issue.

  • I downloaded the new software on my iphone 4 and it worked for a few hours and now won't turn on

    i downloaded the new software on my iphone 4 and it worked for a few hours and now won't turn on

    Reset, hold both home and power buttons until the iPhone begins to restart. If still nothing, connect to Wall Charger for 10 minutes, iPhone may turn ON itself. If still nothing keep on charger and Reset. It can take about 20 seconds of holding both buttons while on charger.

Maybe you are looking for

  • Unable to delete delivery schedule lines in MD04

    Hello All, In an intercompany process, plant A (receiving plant) placed an order through Schedule Agreement on plant B (sending plant). Accordingly schedule lines are released. Plant A received material but schedule lines are still reflecting in plan

  • SQL Loader need to insert the input filename into output table

    Hi All, I've a small problem with my SQL Loader query. My sql loader should read a file and write the data into a file. Also this sql loader should read the filename and write it into the same table. Here's my control file code: LOAD DATA APPEND INTO

  • Purchase Scenario

    Hi Experts, Please advice your valuable inputs for the present scenario, My client has procured a material of Qty 10, and i have proceded with GR for Qty-10. Out of 10 my 8 Qty is Good and my 2 Qty is damaged. I will raise a return P.O for this 2 Qty

  • JBO-25001 Business Components Error

    Hi to all, I am experiencing some VERY STRANGE behaviour in JDeveloper ADFBC. I am using Jdeveloper 10.1.3.1.0.3984 to build an application using ADF and Business Components. I have four tables, JAAS_USERS, JAAS_ROLES, JAAS_REALMS and JAAS_MAPPINGS.

  • Watching a daily video coming into my iMac on my TV using Apple TV 2

    I subscribed to a daily video that comes in on my iMac.  I have a AppleTV 2 that is HDMI wired to my plasma TV.  on the AppleTV menu/settings I connected the AppleTV to my home Airport Extreme network.  I can get all the standard menu choices fine. I