Firewall Migration

If you are changing brands, then you have to do it all from scratch.  Take the time to document everything you have.  Nat entries, rules, vpn configurations etc.  Look to see what can be cleaned up.  It's amazing how much legacy crap sits around in firewalls because nobody ever deletes anything.  As time drags on, it becomes... well we don't know what that's for, it's always been there so we don't want to delete it.
Create everything in the new firewall, and disable rules that you think can be done away with.  If nobody reports a problem within a few months, you are probably safe to delete them.
It's really a mindset issue.  You have to look at it as an opportunity to clean house.

Is there a way to migrate from one firewall to another in tested and measured way? I have only seen forklift in the new firewall and then fix all the problems as they go. I just makes for a nightmare, is there a better way? Usually staying with the same Brand and Model scheme is helping a lot, but as Da_Schmoo stated, without any information really, we can't help.

Similar Messages

  • ASA 5520 Upgrade From 8.2 to 9.1

    To All Pro's Out There,
    I have 2 x ASA 5520 in Active/Standby state (Routed, Single context) running 8.2(3) image. They are working great and everybody is happy. Now it's time for us to upgrade to the latest and greatest version: 9.1 and as you know there are some architectural changes Cisco made to NAT statements and Access Lists. As one can tell, we have a monster environment in terms of NAT statements and access list that are currently configured on the appliances.
    In order to make the upgrade process "less" painful, I was able to find a loaner ASA 5520 device so I can practice the upgrade process offline and if needed, I use it in production (in conjunction with existing Primary and Secondary devices) should it be helpful. I currently don't have any plans on how to move forward with these 3 devices and put together an smooth upgrade. I am asking advice from experts that perhaps have done this in the past and know some Do's and Don’ts and can provide me some options toward getting best result: Minimum downtime and Smooth upgrade.
    I appreciate all the help in advance.

    Hi,
    My personal approach from the start has been to learn the new NAT configuration format on the ASA CLI and manually convert the configurations for the new ASA software. I am under the impression that the automatic conversion that the ASA does by rebooting straight into a new software level causes quite a lot of configurations and they arent really optimal.
    In your case it seems that you have a pretty much better situation than most people that dont have the chance to use a test device to test out the setup before actually putting it in production.
    What you can basically do is
    Insert the 8.2 configuration to the test ASA and boot it straight to the higher software levels and see what the conversion has done to the ASA configurations.
    You can use "packet-tracer" command to test if correct NAT rules are still hit after the conversion
    So far I have been lucky in the sense that most of the upgrades I have done have involved new hardware which has basically let me configure everything ready and just switch devices for the customer. So far everything has went really well and there has been only a 1-2 mistakes in NAT configurations because of misstyping some IP address or interface name which basically resulted from a lot of copy/paste when building the configurations. And these couple of mistakes have been from around 150 firewall migrations (of which most from FWSM Security Context to a ASA Security Context)
    If you have time to put into this then I would suggest you try to learn the new NAT format and write your NAT configurations yourself. Converting the existing configurations should essentially give you the tools to then maintain that firewall configuration easily in the future and apply that knowledge elsewhere.
    If you want to read a bit about the new NAT configuration format then I would suggest having a look at the NAT 8.3+ document I made:
    https://supportforums.cisco.com/docs/DOC-31116
    My personal approach when starting to convert NAT configurations for the upgrade is
    Collect all NAT configurations from the current ASA including any ACLs associated with the Policy type NATs and NAT0 configurations
    Divide NAT configurations based on type   
    Dynamic NAT/PAT
    Static NAT
    Static PAT
    NAT0
    All Policy Dynamic/Static NAT/PAT
    Learn the basic configuration format for each type of NAT configuration
    Start by converting the easiest NAT configurations   
    Dynamic NAT/PAT
    Static NAT/PAT
    Next convert the NAT0 configurations
    And finally go through the Policy NAT/PAT configurations
    Finally go through the interface ACLs and change them to use the real IP address as the destination in all cases since the NAT IP address is not used anymore. In most common screnarios this basically usually only involves modifying the "outside" interfaces ACL but depending if the customer has some other links to external resourses then its highly likely that same type of ACL changes are required on those interfaces also.
    The most important thing is to understand how the NAT is currently working and then configure the new NAT configuration to match that. Again, the "packet-tracer" command is a great tool to confirm that everything is working as expected.
    One very important thing to notice also is that you might have a very large number of Identity NAT configurations between your local networks interfaces of the ASA.
    For example
    static (inside,dmz) 10.10.10.0 10.10.10.0 netmask 255.255.255.0
    In the new software you can pretty much leave all of these out. If you dont need to perform NAT between your local interfaces then you simply leave out all NAT configurations.
    Naturally you can also use these forums to ask help with NAT configuration conversions. Even though its a very common topic, I dont personally mind helping out with those.
    So to summarize
    Try out the ASAs automatic configuration conversion when simply booting to new software levels on the test ASA you have
    Learn the new NAT configuration format
    Ask for help here on CSC about NAT configuration formats and help with converting old to new configurations.
    Personally if I was looking at a samekind of upgrade (which I will probably be looking at again soon) I would personally do the following
    Convert the configurations manually
    Lab/test the configurations on an test ASA
    During Failover pairs upgrade I would remove the Standby device from network, erase its configurations, reboot it to new software, insert manually written configurations.
    Put the upgraded ASA to the device rack and have cables ready connected to the customer devices if possible (or use existing ones)
    Disconnect currently active ASA running 8.2 and connect the new ASA to the network while clearing ARP on the connected routers to avoid any problems with traffic forwarding.
    Test connectivity and monitor ASAs connection and xlate tables to confirm everything is working
    Will add more later if anything comes to mind as its getting quite late here
    Hope this helps
    - Jouni

  • Error while booting the application server

    CMDTUX_CAT:1685: ERROR: Application initialization failure
    CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha

    I get the same error ( (ERROR) nssock: Cannot listen on host bin/ in port 7180. it may already be in use for AF_INET6) booting the domain on a SuSE Linux box.  I switched the port to 7190 thinking it might be a conflict, but get the same message in the PSRENSRV log each time I boot the domain.  Despite the fact that this error recurs in the logs, the service shows as listening on the port ... however RENSERV is not working at all ... test page ping can't find it.
    update ... I'm all fixed up now.  There were a series of unrelated items leading me down rabbit holes.  The first of which was my domain was booting, and I could see the port was listening via netstat ... situations around the above error all involved a domain not booting.  I was also receiving a "Error retrieving REN server URL from database" in PSUQSRV and PSMCFLOGs which was an erroneous message you get about REN when MCF is turned on.  In the end it turns out this little demo web/app box was in a DMZ, and they missed a firewall rule for that port ... no one had run into anything that used REN until now. I set up a temp domain on a machine out of the DMZ that just does REN for now ... they're in the middle of a firewall migration and probably wouldn't be in maintenance mode for a demo system

  • Conversion from Juniper Configuration to Cisco Config

    Hi,
    I have a Juniper firewall config of 32,000 lines. I want to convert this into Cisco ASA v.8.3. Is there any pearl script available which can do that for me?
    regards,
    Mohsin

    The first question is if you are migrating a ScreenOS config or a JunOS config.  If you are migrating a ScreenOS config, the process is rather simple and can be done with the use of notepad/word to do search and replaces for key words and excel for re-ordering columns (ScreenOS puts the permit after the services, we put it before the services, etc).  I have helped with a few migrations myself using this process and have found it much more reliable than even Juniper's ScreenOS to JunOS tool. (Perhaps because it is a firewall-firewall migration, as opposed to a firewall-router migration.)  Your account team can provide you with documentation to support this process.
    Now, if you are migrating a JunOS config to an ASA config, there are also tricks that allow you to do it.  However, it is not as straight forward as the JunOS config looks very different.  This process is most efficiently done using the output of some show commands rather than the config itself.  In this case, I would strongly recommend you contact your account team for more details.
    In either case, welcome to Cisco's firewalls.  I am sure you will feel like one who has emerged from black and white movies to technicolor!!
    Maria

  • Easy way to detect unused network objects/groups on ASA

    Hello,
    I find that every 6-12 months I will log on to the ASDM and go to the Network Objects/Groups section and spend ages right clicking on each object and seeing if it is still being used and if it isn't I then delete it.  It can take a long time as our config is large, are there any better ways of keeping the ASA update to date?
    Thanks

    Hello,
    I know that this is a very old post, however, starting in ASDM 7.1(3), there is a "Not Used" button in the app.  Click it and it will provide you list of objects/groups that are not being used in ACLs.  You can then choose which objects to delete (they're all checked by default).
    As of 7.1(4), however, there is no such feature for protocols/protocol groups.
    Hopefully this helps someone - I know that it saved me a lot of time in a few firewall migration projects!
    Rob.

  • Any tool to migrate from a Nokia/CheckPoint firewall to CISCO ASA

    Would like to know if there is any tool that could help to migrate CheckPoint firewall objects and rules database to CISCO ASA equivalent ;
    Could the last CISCO Security Manager product help in this process ?
    thanks in advance

    Joel, you may need to use a firewall analyser or fw auditing tools to retreave fw rules from Nokia/Fw-1 in a legibel format like using LFA, but you still need to manually entered the configuration into ASA.
    Check this link and look for (LFA) Lumeta firewall analyser, they work along with checkpoint..
    http://www.lumeta.com/
    Also reference this thread, it may help.
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7e5c4
    HTH
    Jorge

  • Mac mini halts on "WaitForSystemMapper" after migration to Mac OS 10.8.5

    Hi,
    I have a mac mini mid 2010 with 4Gb RAM, nVidia GeForce 320M, HDMI running well under mac OS 10.7 last update
    After making a clone on external USB disk, I tried to migrate to OS 10.8.5 I bought in june 2014 from the Apstore (after having halt after an attempt to Maverick migration)
    1) I had also an halt after the OS 10.8.5 migration (grey screen with apple)
    2) After shut down by pressing power button during 5s, I tried dto restart in Verbose mode (Apple+V key pressed at start), the it shows the following :
    - some FIPS check are done, all passed with success,
    - the it halts on "WaitForSystemMapper" with some hexadecimal indication following
    3) After shut down by pressing power button during 5s, I have been abble to start OS 10.8.5 without the extension (safe mode with upcase key at start)
    I tried to disinstall all non Apple programs but without result (same halt at reboot in normal mode)
    4) I also tried to reinit the SMC (unplugging the mac, then starting after replug and 10s wait) : the same
    5) I also tried to reinit the PRAM (Apple+Alt+P+R at start) : the same
    6) Then, i formated the HD of the Mac mini and isntalled OS 10.8.5 from the external USB disk where I put the OS 10.8.5 installer
    It rebooted well on the Mac mini HD to install OS 10.8.5
    Then I requested to import data (accounts, programs and system setup) from the backup USB disk
    It went well, but I was requested to upgrade the system and other Aps : I did it and.... again the same halt, with the same message  and stop at "WaitForSystemMapper" when looking in verbose mode
    Do you have any idea of what can occur, what can I displace or test in ktex for instance?
    I would like not to have to reinstall all Aps manually, with their proper user data
    Thank you in adavance for help

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    Copy a line of text in this window to the Clipboard.
    Paste into the window of another application.
    Wait for the test to run. It usually takes a few minutes.
    Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */  /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n  "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n  [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n  ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Migrate mailbox from Exchange 2007 to Exchange 2013, mailbox stay in queue

    Hi,
    I'm trying to migrate a mailbox but the request is staying in queue, according to : Get-moverequest | Get-Moverequeststatistics
    Configuration server Exchange 2007 SP3 :
    Domain : test.com
    OS : Windows 2008 server SP2 (not R2)
    Firewall : OFF
    Exchange roles are on separate three  servers : CAS - MAILBOX - HUB.
    Configuration Server Exchange 2013 :
    Domain : new.com
    OS: Windows 2012 R2
    Firewall : OFF
    This environment is on a closed network unable to reach internet.
    I have try to restart the Replication service, but it didn't worked.
    I've searched a lot but i can't find any information to help me. The mailbox stays in queue....
    Anyone ever had this issue?
    Thanks you and have a nice day.

    Hi ,
    Based on my knowledge below things need to checked.
    1.Please check the content index state of the target database is healthy and ensure the entire mailbox database status was in healthy state.
    2.If your exchange 2013 is an single server and target database copy doesn't have the second copy then we need to set the below parameter value to none.
    DataMoveReplicationConstraint : None
    Note : After the above change ,Microsoft exchange mailbox replication service needs to be restarted.
    3.Restart the Microsoft exchange mailbox replication service and check the results.
    4. Have you tried moving the same mailboxes to the different databases.
    5.If the move request is in the failed state then we can export the details of the move request to find out the exact cause for the failure.
    Get-MoveRequestStatistics -Identity "nithya" -IncludeReport | fl >c:\nithya.txt
    Please feel free to reply me if you have any queries.
    Thanks & Regards S.Nithyanandham

  • Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

    Hello, everyone, my name is rafl
    I have a problem with exchange 2013 active sync.
    I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
    but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
    (legacy.domain.com)
    the process of moving mailboxes successfully without error.
    Access OWA for exchange 2007 and exchange 2013 is running normally
    access mail from Outlook running normally
    Certificate request has been installed and has no problem with it
    The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
    The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
    ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
    user mailboxes are still on exchange 2007 is not problematic.
    only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
    but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
    only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
    any ideas for this problem, and what should I check on the exchange server ..?

    i have run the activesync test connectivity and get some error :
    Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 3091 ms.
    Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21072 ms.
    Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21049 ms.
    I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
    for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

  • Issues with Shell32.dll, NTDLL.DLL and Migration from Windows 2003 to Windows 2012

    Hello all,
    I am new to ThinApp and working as a consultant to help a company migrate older Windows 2003 software to Windows 2012.  They have purchased ThinApp 5.0.4.5 so that is what we will be using.
    We have created a clean 2003 VM and did a pre-scan
    We loaded the application and configured it  and then did a capture.
    We then tested the capture the 2003 VM and it works
    We then loaded the capture on a Clean 2003 VM and it works
    We then loaded onto a 2012 VM and when running the app from a command window get an error  -missing import shell32.dll:StrCpyNW
    If we run the capture in Emulation Mode on 2012 VM, we do not get the Shell32.dll error but instead the cmd fails with a Fault Module Name  - NTDLL.DLL error
    I am sure I am just missing the correct location to identify or configure the capture - but do not have the experience to know where yet.  (Taking training next week).
    Until then, is there any suggestions which I can try?
    Thanks for your time in advance,
    Vince 

    Tried and done that.  The main issue while configuring the printer from the printer Web Interface is that there is no access to the Digital Sending section due to a problem with the "Sun Java plug in"  I think the code mentions 1.31. or similar.
     We downloaded the java plug in and installed it.  No progress. 
    We reset the printer to defaults and reconfigured it .. It sees the smtp gateway and access it but fails sending email with scanned documents.. 
    We have tried in very different ways.  We connected the printer to another domain SBS server 2003 and it works beautifully.  So, I have no idea on what is the problem. We created a firewall exception for ports 390. 1783 from the SBS to the Printer
    and still no go..
    We have tried four different accounts and nothing.  Same results as stated originally.
    Any other suggestions??
    JFM

  • How to migrate from BE6000 to Communications Manager

    Dear forum members,
    first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now.
    Technically everything worked just fine, right from the beginning until now. But starting from the first day, I had several huge
    issues with our Cisco reseller (Deutsche Telekom/T-Systems).
    It all started with the fact, that all hardware related contracts and services were SmartNet Services and added directly to our company account.
    All software related services were booked as "Shared Services". So we were the rightfull owner of the licenses but our reseller had to migrate/issue all tickets, licensing requests and so on.
    It took us (me and our reseller) over a year to set these things "right".
    Right now, everything (hardware and software related services, licenses, ...) are bound to our Cisco account. We can open TAC cases, download software/firmware and so on.
    Last week, we migrated successfully from Call Manager 8.6.5 to 10.0. So I was really happy to see, that everything worked fine (I could migrate my licenses, download the software, ...).
    I thought, "Hey, finally eveything works as expected..."
    I was wrong, so wrong...
    What happend? I tell you what happend...
    During the migration, we had to move all our servers (CUCM, CUC & CUPS) from our Cisco C200 M2 Server to our Dell VMware cluster, because the C200 M2 is (as far as I know) not supported anymore for BE6000 10.x and we didn't wand to buy a new C220 M3 server.
    Due to the fact, that the BE6000 is only supported on that hardware, we decided to migrate our BE6000 to a Cisco Unified Communications Manager.
    Our reseller told me, that Cisco Unified Communications Manager is supported on third party hardware (if the hardware meets certain requirements, like processors and so on) and due to the fact that we only use CUCM, CUC & CUPS there would be no difference for us when it comes to features.
    So I said: Great, let's do that. And when you are doing that, can you please order us a license for a collab edge gateway (the thing that enables Jabber to proxy through the firewall without the need of a vpn tunnel).
    And that was the point when our communication stucked...
    Since that mail, I don't get any response from our reseller regarding this two tasks. They told me, that I can do that myself. I tried that and searched all cisco portals and then opended a TAC case.
    The TAC team told me, that our reseller had to file a sales order (is that right?) and send me back to them.
    Right now, I'am trapped between Cisco and my reseller and I'am really tired. Can someone please tell me what I can do/have to do to patch things up?
    Kind regards,
    René

    DRS from your current server which is using the 6K OVAs, into your dell server which should NOT be using the 6K OVAS, but any of the other non-6K options you have.
    I assume you've already verified your server is supported under 3rd party spec guidelines???
    But, that's all it takes to move from a 6K into an enterprise CUCM, or the other way around as well.

  • Exchange server using interface IP after migrating from 8.2 to 9.1

    hi,
    i recently upgraded an ASA pair from 5510 (ASA OS 8.2) to 5512 (ASA OS 9.1). Many of the services are working fine including VPN after some tweaking and modifications in the new configuration, however the exchange server is not sending the traffic from its designated public IP which is mentioned in NAT statements. Exchange is using the public interface IP of the firewall for outbound communication. If i try to telnet from outside to the public IP addresses of the exchange server its giving proper response. kindly help me with this issue. i believe this is some NAT related issue.
    OLD configuration (relevant part only)
    access-list out_in extended permit tcp any host 213.42.201.35 eq www 
    access-list out_in extended permit tcp any host 213.42.201.35 eq https
    access-list out_in extended permit icmp any host 213.42.201.35
    access-list out_in extended permit tcp any host 213.42.201.35 eq smtp 
    static (DMZ,outside) tcp 213.42.201.35 www 172.16.2.200 www netmask 255.255.255.255
    static (inside,outside) tcp 213.42.201.35 https 192.168.190.57 https netmask 255.255.255.255
    static (DMZ,outside) 213.42.201.35 172.16.2.11 netmask 255.255.255.255
    access-list out_in extended permit tcp any host 213.42.201.34 eq smtp 
    static (DMZ,outside) 213.42.201.34 172.16.2.21 netmask 255.255.255.255
    New Configuraion
    object network obj-172.16.2.21
     host 172.16.2.21
     description Created during name migration
    object network obj-172.16.2.11
     host 172.16.2.11
    access-list out_in extended permit icmp any host 172.16.2.11 
    access-list out_in extended permit tcp any host 172.16.2.11 eq smtp 
    access-list out_in extended permit tcp any host 172.16.2.21 eq smtp
    nat (inside,outside) static 213.42.201.35 service tcp https https 
    object network obj-192.168.0.0
     nat (inside,outside) dynamic interface dns
    object network obj-192.168.0.0-01
     nat (inside,DMZ) dynamic 172.16.2.254 dns
    object network obj_any
     nat (inside,outside) dynamic obj-0.0.0.0
    object network obj_any-01
     nat (inside,DMZ) dynamic obj-0.0.0.0
    object network obj-172.16.2.21
     nat (DMZ,outside) static 213.42.201.34
    object network obj-172.16.2.11
     nat (DMZ,outside) static 213.42.201.35 service tcp smtp smtp 
    regards
    Najeeb

    Hi Najeeb,
     If  you are able to reach out to your SMTP via Public IP address , 172.16.2.11 will be using public IP address 213.42.201.35 for mail delivery (SMTP service alone) . Server 172.16.2.21 will be using Public IP address 213.42.201.34 for any traffic including SMTP , to double check this open your IE on your 172.16.2.21 google it for what is my IP address , you will see your public ip address 213.42.201.34 on your google results .
    At any point time your both server will never use your outside interface for any external communication
              The issue is exchange is sending the outgoing traffic via the outside interface of my firewall (213.42.201.46).
    HTH
    Sandy

  • IMac CPU3.06 GHz Intel Core 2 Duo, 8GB, Extremely slow and repeatedly "out of Memory" since migration from Mountain Lion to Mavericks

    Dear Apple Support Community.
    As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
    I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
    For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
    Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
    So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
    Hardware Information:
    iMac (24-inch, Early 2009)
    iMac - model: iMac9,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
    8 GB RAM
    Video Information:
    ATI Radeon HD 4850 - VRAM: 512 MB
    Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 1.9 - SDK 10.9
    AppleAVBAudio: Version: 2.0.0 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
    OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
    Disk Information:
    WDC WD1001FALS-40K1B0 disk0 : (1 TB)
    EFI (disk0s1) <not mounted>: 209.7 MB
    XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
    Recovery HD (disk0s3) <not mounted>: 650 MB
    OPTIARC DVD RW AD-5670S 
    USB Information:
    Apple Inc. Built-in iSight
    Canon CanoScan
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
    Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    WD My Passport 071D 800mbit - 800mbit max
    EFI (disk1s1) <not mounted>: 209.7 MB
    disk1s2 (disk1s2) <not mounted>: 2 TB
    Boot OS X (disk1s3) <not mounted>: 134.2 MB
    Thunderbolt Information:
    Kernel Extensions:
    com.f-secure.kext.fsauth          (1.0.0d1)
    Problem System Launch Daemons:
    [failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
    Problem System Launch Agents:
    Launch Daemons:
    [loaded] com.adobe.fpsaud.plist
    [invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
    [loaded] com.f-secure.fsavd.dbhelper.plist
    [loaded] com.f-secure.fsavd.plist
    [loaded] com.f-secure.fsmac.firewall.plist
    [loaded] com.f-secure.fsmac.fsupdated_guts2.plist
    [loaded] com.f-secure.fsmac.licensetool.plist
    [loaded] com.macpaw.CleanMyMac2.Agent.plist
    Launch Agents:
    [loaded] com.babylon.activation.plist
    [loaded] com.bjango.istatlocal.plist
    [loaded] com.f-secure.relauncher.plist
    [loaded] com.f-secure.trasher.plist
    User Launch Agents:
    [loaded] com.adobe.ARM.[...].plist
    [loaded] com.google.keystone.agent.plist
    [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
    [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
    [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
    User Login Items:
    iTunesHelper
    Dropbox
    F-Secure Anti-Virus for MAC
    3rd Party Preference Panes:
    Flash Player
    Internet Plug-ins::
    FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
    Default Browser: Version: 537 - SDK 10.9
    AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
    AdobePDFViewer: Version: 11.0.04 - SDK 10.6
    DivXBrowserPlugin: Version: 2.1
    Flash Player: Version: 11.9.900.170 - SDK 10.6
    OfficeLiveBrowserPlugin: Version: 12.2.8
    Google Earth Web Plug-in: Version: 6.1
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    User Internet Plug-ins::
    Picasa: Version: 1.0
    Bad Fonts:
    None
    Old applications:
    None
    Time Machine:
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
    XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
    Destinations:
    XooS5 TM [Local] (Last used)
    Total size: 2 
    Total number of backups: 32
    Oldest backup: 2013-09-15 01:11:39 +0000
    Last backup: 2013-12-07 12:48:45 +0000
    Size of backup disk: Too small. Backup size 2  < (Disk used 753.90 GB X 3)
    Time Machine details may not be accurate. All volumes being backed up may not be listed.
    REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
    Top Processes by CPU:
    5%          backupd
    5%          Mail
    5%          WindowServer
    3%          Finder
    3%          Dropbox
    Top Processes by Memory:
    1.60 GB          mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
    82 MB          Finder
    74 MB          Mail
    49 MB          softwareupdated
    49 MB          Dropbox
    Virtual Memory Statistics:
    97 MB          Free RAM
    1.21 GB          Active RAM
    1.19 GB          Inactive RAM
    1.21 GB          Wired RAM
    1.83 GB          Page-ins
    36 MB          Page-outs
    Please find now some additional measurements collected with iStat while running EtreCheck:
    Practically:
    The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
    Aperture has becomre to slow to be useable
    If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
    Conclusions
    From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
    Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
    The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
    Intended action plan
    Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
    Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes  and DVD player.
    In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
    Yours sincerely
    Core

    ... what anti-virus would you recommend using?
    Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
    A much better question is "how should I protect my Mac":
    Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Disable Java in Safari > Preferences > Security.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
    Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • How do I fix an improper migration; and hardware or migration issue?

    I have been having screen freezes since I migrated my user account (incorrectly, I now discover) from my G5 to my brand-new, week-old precious ...er 13" Macbook Pro (2.66 processor). Doesn't matter what program I'm in and hardboot is the only way to regain any response (wince) -- the cursor just disappears, no trackpad or keyboard control. (no externals attached, no wireless either once.)
    I ran the hardware test from the Applications disk: the short test reports no problems. The extended test froze after 8 minutes but it was on battery; I re-ran the extended test with it plugged in and it froze again on the first pass after 29 minutes. Had to hard-boot it both times; cancel/stop test button would not respond. I figured two freezes was an answer.
    First assumption is I have a hardware issue and I need to take it back to the store.
    However. When I migrated my user files, I did so without taking advantage of this forum's extensive discussions and with my head in the..er.. clouds about PowerPC to Intel issues. (I've seen several links and tips to the proper way of doing things, now, thanks. And sigh)
    But I haven't seen precisely how one is supposed to fix doing it wrong. (Feel free to point me to such a place, my search-fu is not strong today.)
    What I did wrong:
    A. I just brought everything over using migration assistant; settings, software, everything. PowerPC-only software--heck, I might have even brought my old classic stuff in its folder. My third-party firewall and virus protection program (Intego Netbarrier) was apparently also PowerPC only, but it installed and appeared to be running.
    B. I just had to play with my new toy before I migrated, so I did the apparently horrible mistake of creating a FancyNewUser account before migration.
    C. When I migrated, I created a new account (UpdatedUser) for my old G5 account, settings, and information. I have not done anything to try to merge those two accounts and don't see the point; sometimes it's useful to have a separate admin account. (The migration itself, btw, was fantastically smooth.) But of course the applications are available to both accounts.
    D. Oh, I did not repair permissions on the G5 before I migrated, either. *heavy sigh*
    Minor note. I never upgraded the firmware on the G5 (it was having the 'sleep' issue) I just never put it to sleep. And it seems to me the laptop is freezing when I try to wake it from sleep. At any rate, the laptop was not freezing prior to the migration.
    So.
    1. Is there a way I (a middle-of-the-road user, not really comfy with terminal or command lines although I've used 'em) can determine if this is a hardware or an OS/software conflict issue?
    2. Clearly I need to fix the migration. What's the best way to go about it? Should I
    a) delete the UpdatedUser account entirely and start over? If so, am I right in thinking that I can:
    aa. create a ThirdAccount on my laptop
    ab. move the data I want to keep, like my photos and music and word processing files? (I think it was Kerry's tip: out of UpdatedUser's folders>a shared file>ThirdAccount's desktop>ThirdAccount's correct folders)
    ac. delete the UpdatedUser account and
    ad. perform fresh installs on any software I want on the laptop? (making sure, of course, that it will run on the laptop).
    Uh... this skips the step of uninstalling the programs I shouldn't have migrated. I assume I can't run an uninstaller that might have come with these programs, since that, too, would have been compiled for the PowerPC. So what's the best way of getting rid of them?
    (It occurs to me I could move the data to the FancyNewUser account without creating a third, but I actually like the idea of having a completely clean new account).
    b) Turn the laptop over to the store, ask them to wipe it and reinstall everything so I can start from scratch?
    c) some other option?
    New machine
    Intel Core 2 Duo
    4GB Memory
    320GB hard drive
    NVIDIA graphics
    I'm aware I'm asking a boatload of questions here. Thank you for any help you can offer.

    Let's say you just start over and do an Erase & Install and then migrate using this guide:
    http://discussions.apple.com/thread.jspa?threadID=435350
    This way you're not dragging over a lot of PPC junk.
    I would reinstall all third party apps from their disks.

  • New iMac extremely slow following migration (Help  with Etre Check diagnosis)

    Hi gurus,
    New iMac - scheduled for genius bar on Friday but trying to avoid the trip.  Migrated everything over from 2009 macbook pro to 2011 macbook and now 2013 iMac.  I imagine there is a lot of cruft from the repeated migrations and am close to just wiping and migrating from scratch.  I don't know, however, how to get my old mail and other critical settings over.
    Problem is clearly in the user account.  I created a separate admin account and that runs relatively fine.  Is the below user account salvageable? Should I delete all my old permissions?  Any tips would be appreciated.  Thanks for the Etrecheck program,
    Problem description:
    Application hangs and system unresponsive in migrated user account
    EtreCheck version: 2.1.8 (121)
    Report generated February 16, 2015 at 4:48:06 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Late 2013) (Technical Specifications)
        iMac - model: iMac14,1
        1 2.7 GHz Intel Core i5 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        Intel Iris Pro
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 4:51:57
    Disk Information: ℹ️
        APPLE HDD HTS541010A9E662 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (585.74 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        TOSHIBA External USB 3.0 2 TB
            EFI (disk3s1) <not mounted> : 210 MB
            Time Capsule (disk3s2) <not mounted> : 2.00 TB
        Western Digital My Book 1130 2 TB
            EFI (disk1s1) <not mounted> : 210 MB
            ACbook (disk1s2) <not mounted> : 2.00 TB
        Centon DataStick 30.93 GB
            EFI (disk2s1) <not mounted> : 210 MB
            Install OS X Yosemite (disk2s2) /Volumes/Install OS X Yosemite : 30.59 GB (25.27 GB free)
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.Cycling74.driver.Soundflower (1.4.2) [Click for support]
        [not loaded]    com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) [Click for support]
        [not loaded]    com.logmein.hamachi (1.0) [Click for support]
        [not loaded]    com.seagate.driver.PowSecDriverCore (5.1.1) [Click for support]
        [not loaded]    com.wdc.driver.1394HP (1.0.7) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.7) [Click for support]
        [loaded]    net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) [Click for support]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.SeagateDriveIcons (5.1.1) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.accountsd.plist
        [killed]    com.apple.AirPlayUIAgent.plist
        [killed]    com.apple.bird.plist
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cloudd.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.coreservices.uiagent.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.pluginkit.pkd.plist
        [killed]    com.apple.recentsd.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.secd.plist
        [killed]    com.apple.secinitd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        [killed]    com.apple.spindump_agent.plist
        [killed]    com.apple.tccd.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        23 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.coresymbolicationd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.diagnosticd.plist
        [killed]    com.apple.GSSCred.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.iconservices.iconservicesd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.MobileFileIntegrity.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.sandboxd.plist
        [killed]    com.apple.secinitd.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.spindump.plist
        [killed]    com.apple.sysmond.plist
        [killed]    com.apple.systemstatsd.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    org.cups.cupsd.plist
        22 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.maintain.LogOut.plist [Click for support]
        [not loaded]    com.maintain.Restart.plist [Click for support]
        [not loaded]    com.maintain.ShutDown.plist [Click for support]
        [not loaded]    com.maintain.Sleep.plist [Click for support]
        [running]    com.maintain.SystemEvents.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.seagate.SeagateStorageGauge.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.bombich.ccchelper.plist [Click for support]
        [running]    com.crashplan.engine.plist [Click for support]
        [running]    com.eltima.ElmediaPlayer.daemon.plist [Click for support]
        [failed]    com.google.GoogleML.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.rogueamoeba.hermes.plist [Click for support]
        [failed]    com.vmware.launchd.vmware.plist [Click for support]
        [running]    com.zqueue.servetome-server.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    net.sourceforge.MonolingualHelper.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [running]    .dat0598.40e (hidden) [Click for support]
            /usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
        [unknown]    .datdf56.40b (hidden) [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.amazon.cloud-player.plist [Click for support]
        [running]    com.amazon.music.plist [Click for support]
        [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
        [running]    com.mlbam.nexdef.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Canon IJ Network Scanner Selector2    UNKNOWN  (missing value)
        Dropbox    Application  (/Applications/Dropbox.app)
        ACbook    UNKNOWN  (missing value)
        CrashPlan menu bar    UNKNOWN  (missing value)
        CrashPlan menu bar    Application  (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
        Canon IJ Network Scanner Selector EX    Application  (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
        Caffeine    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        EPPEX Plugin: Version: 10.0 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        SlingPlayer: Version: Unknown - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 9.5.5 [Click for support]
        Leap Web Player: Version: LeapPlayer version 2.0.2f2 [Click for support]
        Unity Web Player: Version: UnityPlayer version 3.5.5f4 - SDK 10.6 [Click for support]
        nppanda3d: Version: Unknown [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        RealPlayer Plugin: Version: Unknown [Click for support]
        QuickTime Plugin: Version: 7.7.3
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 1.4 [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        CoolirisWebKitPlugin: Version: Unknown [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Easy-WebPrint EX: Version: 1.0.0 [Click for support]
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
        ContentUploaderPlugin: Version: 1.2 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 [Click for support]
    3rd Party Preference Panes: ℹ️
        RCDefaultApp
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Java  [Click for support]
        Perian  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 413.60 GB
        Destinations:
            Untitled [Local]
            Total size: 0 B
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Too small
                Backup size 0 B < (Disk used 413.60 GB X 3)
    Top Processes by CPU: ℹ️
            11%    BitdefenderVirusScanner
             7%    WindowServer
             1%    loginwindow
             0%    SystemUIServer
             0%    dpd
    Top Processes by Memory: ℹ️
        94 MB    BitdefenderVirusScanner
        60 MB    Finder
        34 MB    mds_stores
        26 MB    CrashPlanService
        26 MB    WindowServer
    Virtual Memory Information: ℹ️
        34 MB    Free RAM
        1.24 GB    Active RAM
        1.23 GB    Inactive RAM
        1.81 GB    Wired RAM
        37.21 GB    Page-ins
        1.05 GB    Page-outs
    Diagnostics Information: ℹ️
        Feb 16, 2015, 04:30:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-163047_[redacted].crash
        Feb 16, 2015, 02:41:32 PM    /Library/Logs/DiagnosticReports/firefox_2015-02-16-144132_[redacted].hang
        Feb 16, 2015, 02:40:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-16-144005_[reda cted].crash
        Feb 16, 2015, 01:21:20 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-132120_[redacted].crash
        Feb 16, 2015, 11:56:57 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-115657_[redacted].cpu_resource.diag [Click for details]
        Feb 16, 2015, 11:50:54 AM    /Library/Logs/DiagnosticReports/com.zqueue.servetome-server_2015-02-16-115054_[ redacted].crash
        Feb 16, 2015, 11:49:07 AM    Self test - passed
        Feb 16, 2015, 09:55:04 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-095504_[redacted].cpu_resource.diag [Click for details]
        Feb 16, 2015, 09:44:52 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-094452_[redacted].cpu_resource.diag [Click for details]
        Feb 15, 2015, 03:02:01 PM    /Library/Logs/DiagnosticReports/ClamXav_2015-02-15-150201_[redacted].hang
        Feb 15, 2015, 02:58:45 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-15-145845_[reda cted].crash
        Feb 15, 2015, 12:35:39 AM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-15-003539_[redacted].cpu_resource.diag [Click for details]
        Feb 15, 2015, 12:19:21 AM    /Library/Logs/DiagnosticReports/CrashPlanService_2015-02-15-001921_[redacted].c pu_resource.diag [Click for details]
        Feb 14, 2015, 11:45:36 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-234536_[redacted].cpu_resource.diag [Click for details]
        Feb 14, 2015, 07:00:58 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-190058_[redacted].cpu_resource.diag [Click for details]
        Feb 14, 2015, 03:54:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/ClamXav_2015-02-14-155447_[red acted].crash
        Feb 14, 2015, 03:18:24 PM    /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-151824_[redacted].cpu_resource.diag [Click for details]

    Everything is included below.  Shortly before I ran the script I disabled folder actions which appeared to have a bunch of redundant and scripts that were taking close to 6-7 gigs of ram,   It'll be interesting to review the below.  Thanks Mr. Davis, you are a major resource, 
    Start time: 09:12:51 02/17/15
    Revision: 1241
    Model Identifier: iMac14,1
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Time since boot: 7:55
    UID: 501
    USB
        My Book 1130 (Western Digital Technologies, Inc.)
        External USB 3.0 (Toshiba America Info. Systems, Inc.)
        DataStick (Alcor Micro, Corp.)
    Bluetooth
        Apple Magic Mouse
        Apple Wireless Keyboard
    Activity
        CPU: user 18%, system 19%
    CPU usage (%)
        mds (UID 0): 19.5
    I/O wait time (ms/s)
        mds (UID 0): 1156
        mdworker (UID 89): 186
    I/O requests (KiB/s)
        mds (UID 0): 4892
    System errors (per sec)
        mdworker (UID 89, error 2): 158
        mds (UID 0, error 2): 149
        mds (UID 0, error 20): 116
    Trusted certs (user)
        63.197.157.203
    Firewall: On
    Listeners
        kdc: kerberos
        launchd: afpovertcp
        launchd: microsoft-ds
        launchd: printer
        launchd: ssh
    System caches/logs
        1166 MB: /Library/Caches/CrashPlan/42/cpfmf
    Diagnostic reports
        2015-02-14 ClamXav crash
        2015-02-15 ClamXav hang
        2015-02-15 garcon crash
        2015-02-16 BitdefenderVirusScanner crash x2
        2015-02-16 Kernel gpuRestart
        2015-02-16 com.zqueue.servetome-server crash
        2015-02-16 firefox hang
        2015-02-16 garcon crash
    I/O errors
        disk3s2: data underrun 1
        disk1s2: do_jnl_io: strategy err 0x6 2
    Volumes
        disk0s2: /
        disk1s2: /Volumes/Install
        disk3s2: /Volumes/ACbook
        disk2s2: /Volumes/Time
    Kernel log
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on Console(2347)
        Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on iTunes(2727)
        Feb 15 09:48:43 IOAudioStream[0xffffff802f3abc00]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
        Feb 15 14:53:10 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 15 14:56:36 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
        Feb 16 09:39:13 utun_start: ifnet_disable_output returned error 12
        Feb 16 10:07:25 Trying restart GPU ...
        Feb 16 11:43:50 jnl: disk1s2: write_journal_header: error writing the journal header!
        Feb 16 11:43:51 jnl: disk1s2: close: journal 0xffffff802b4daa80, is invalid.  aborting outstanding transactions
        Feb 16 11:51:14 utun_start: ifnet_disable_output returned error 12
        Feb 16 11:57:11 jnl: disk1s2: write_journal_header: error writing the journal header!
        Feb 16 11:57:11 jnl: disk1s2: close: journal 0xffffff8025c1cc20, is invalid.  aborting outstanding transactions
        Feb 16 14:22:43 Limiting closed port RST response from 423 to 250 packets per second
        Feb 16 14:24:06 Limiting closed port RST response from 264 to 250 packets per second
        Feb 16 14:24:28 Limiting closed port RST response from 324 to 250 packets per second
        Feb 16 14:24:42 Limiting closed port RST response from 251 to 250 packets per second
        Feb 17 01:18:41 Sleep failure code 0x00000088 0x14006700
        Feb 17 01:18:41 System was rebooted due to Sleep/Wake failure
        Feb 17 01:18:41 Failed to open swap file 30
        Feb 17 01:18:41 vm_swap_create_file failed @ 19 secs
        Feb 17 01:18:41 USBF:    20.861    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002ed while doing getting port status (4)
        Feb 17 01:18:41 USBF:    20.861    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002c0 while doing clearing port feature (2)
        Feb 17 01:19:29 utun_start: ifnet_disable_output returned error 12
        Feb 17 08:10:16 [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0x40
    System log
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
        Feb 17 09:09:31 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
        Feb 17 09:09:31 WindowServer WSGetSurfaceInWindow : Invalid surface 687364876 for window 227
        Feb 17 09:09:37 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
        Feb 17 09:09:38 WindowServer WSGetSurfaceInWindow : Invalid surface 1046946449 for window 227
    Console log
        Feb 17 07:47:09 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid.  Unable to determine schema version.
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
        Feb 17 07:54:18 ReportCrash Invoking spindump for pid=9255 wakeups_rate=757 duration=60 because of excessive wakeups
        Feb 17 07:54:59 ReportCrash Invoking spindump for pid=9269 wakeups_rate=1144 duration=40 because of excessive wakeups
        Feb 17 08:09:53 ReportCrash Invoking spindump for pid=417 wakeups_rate=252 duration=179 because of excessive wakeups
        Feb 17 08:15:34 ReportCrash Invoking spindump for pid=9290 wakeups_rate=203 duration=222 because of excessive wakeups
        Feb 17 08:18:12 ReportCrash Invoking spindump for pid=6328 wakeups_rate=185 duration=244 because of excessive wakeups
        Feb 17 08:28:18 ReportCrash Invoking spindump for pid=9314 wakeups_rate=3955 duration=12 because of excessive wakeups
        Feb 17 08:32:28 ReportCrash Invoking spindump for pid=9321 wakeups_rate=609 duration=74 because of excessive wakeups
        Feb 17 08:36:08 ReportCrash Invoking spindump for pid=9331 wakeups_rate=573 duration=79 because of excessive wakeups
        Feb 17 08:38:36 ReportCrash Invoking spindump for pid=9348 wakeups_rate=1503 duration=30 because of excessive wakeups
        Feb 17 08:41:49 ReportCrash Invoking spindump for pid=9378 wakeups_rate=725 duration=63 because of excessive wakeups
        Feb 17 08:45:39 ReportCrash Invoking spindump for pid=9390 wakeups_rate=398 duration=114 because of excessive wakeups
        Feb 17 08:49:04 ReportCrash Invoking spindump for pid=9420 thread=174222 percent_cpu=63 duration=143 because of excessive cpu utilization
        Feb 17 08:50:57 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
        Feb 17 08:51:18 mdworker Error loading /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter:  dlopen(/Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotli ghtImporter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter, 262): Library not loaded: @rpath/MAFiles.framework/Versions/A/MAFiles
         Referenced from: /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter
         Reason: image not found
        Feb 17 08:51:18 mdworker Cannot find function pointer MetadataImporterPluginFactory for factory UUID in CFBundle/CFPlugIn 0x7f8b9870c650 </Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImp orter.mdimporter> (bundle, not loaded)
        Feb 17 09:10:19 nsurlstoraged ERROR: unable to get the receiver data from the DB!
    Loaded kernel extensions
        net.telestream.driver.TelestreamAudio (1.1.0)
    Daemons
        com.adobe.fpsaud
        com.apple.AccountPolicyHelper
        com.apple.CodeSigningHelper
        com.apple.Kerberos.kdc
        - status: 1
        com.apple.MobileFileIntegrity
        com.apple.aelwriter
        com.apple.awdd
        com.apple.cache_delete
        com.apple.cfprefsd.xpc.daemon
        com.apple.coreduetd
        com.apple.coresymbolicationd
        com.apple.ctkd
        com.apple.diagnosticd
        com.apple.dpd
        - status: 75
        com.apple.icloud.findmydeviced
        com.apple.iconservices.iconservicesagent
        com.apple.iconservices.iconservicesd
        com.apple.ifdreader
        com.apple.nehelper
        com.apple.networkd_privileged
        com.apple.nsurlsessiond_privileged
        com.apple.nsurlstoraged
        com.apple.periodic-daily
        com.apple.periodic-weekly
        com.apple.sandboxd
        com.apple.secinitd
        com.apple.softwareupdate_download_service
        com.apple.softwareupdated
        com.apple.spindump
        com.apple.sysmond
        com.apple.systemstatsd
        com.apple.tccd.system
        com.apple.watchdogd
        com.apple.wdhelper
        com.bombich.ccchelper
        com.eltima.ElmediaPlayer.daemon
        com.google.GoogleML
        - status: 1
        com.google.keystone.daemon
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
        com.rogueamoeba.hermes
        com.vmware.launchd.vmware
        - status: 78
        com.zqueue.servetome-server
        jp.co.canon.MasterInstaller
        net.sourceforge.MonolingualHelper
        org.cups.cupsd
        org.macosforge.xquartz.privileged_startx
    Agents
        com.adobe.ARM.UUID
        com.amazon.cloud-player
        - status: 78
        com.amazon.music
        com.apple.Safari
        com.apple.photostream-agent
        com.google.keystone.system.agent
        com.maintain.SystemEvents
        com.microsoft.SyncServicesAgent
        com.mlbam.nexdef
        com.oracle.java.Java-Updater
        com.seagate.SeagateStorageGauge.plist
        org.macosforge.xquartz.startx
    User overrides
        com.apple.imagent.monaco
        com.apple.FTMonitor
        com.apple.apsd-ft
    User login items
        iTunesHelper
        - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
        Canon IJ Network Scanner Selector2
        - missing value
        Dropbox
        - /Applications/Dropbox.app
        ACbook
        - /Volumes/ACbook
        CrashPlan menu bar
        - missing value
        CrashPlan menu bar
        - /Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app
        Canon IJ Network Scanner Selector EX
        - /Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app
        Caffeine
        - missing value
    Firefox extensions
        Mozilla Firefox hotfix
        Hide My ***! Web Proxy
        FoxyProxy Standard
        Jesper Staun Hansen
        Torrent Tornado
        Torrent Finder Toolbar
    Widgets
        iStat nano
    iCloud errors
        bird 405
        cloudd 68
        CallHistorySyncHelper 6
        Safari 4
        accountsd 2
    Continuity errors
        lsuseractivityd 8
        Safari 2
    Restricted files: 43
    Lockfiles: 22
    Accessibility
        Keyboard Zoom: On
        Scroll Zoom: On
    Contents of /Library/LaunchAgents/com.maintain.LogOut.plist
        - mod date: Feb  9 20:01:50 2015
        - checksum: 2486542021
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.LogOut</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to log out</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.Restart.plist
        - mod date: Feb  9 19:55:16 2015
        - checksum: 1856196442
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.Restart</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to restart</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.ShutDown.plist
        - mod date: Feb  9 19:55:17 2015
        - checksum: 2131448796
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.ShutDown</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to shut down</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.Sleep.plist
        - mod date: Feb  9 20:01:53 2015
        - checksum: 2684026111
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.Sleep</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/osascript</string>
        <string>-e</string>
        <string>delay 3</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>do shell script &quot;killall Cocktail&quot;</string>
        <string>-e</string>
        <string>end try</string>
        <string>-e</string>
        <string>ignoring application responses</string>
        <string>-e</string>
        <string>try</string>
        <string>-e</string>
        <string>tell application &quot;System Events&quot; to sleep</string>
        ...and 7 more line(s)
    Contents of /Library/LaunchAgents/com.maintain.SystemEvents.plist
        - mod date: Feb  9 19:55:17 2015
        - checksum: 1297325733
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.maintain.SystemEvents</string>
        <key>ProgramArguments</key>
        <array>
        <string>/System/Library/CoreServices/System Events.app/Contents/MacOS/System Events</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Feb  6 15:45:52 2015
        - checksum: 655956191
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>17</integer>
        <key>Minute</key>
        <integer>49</integer>
        <key>Weekday</key>
        <integer>1</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.seagate.SeagateStorageGauge.plist
        - mod date: Mar 10 08:38:47 2010
        - checksum: 3262128215
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <!--
           com.seagate.SeagateStorageGauge.plist
           SeagateDiagnostics
           Created by John Brisbin on 3/10/10.
           Copyright 2010 Seagate Technologies LLC.. All rights reserved.
        -->
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.seagate.SeagateStorageGauge.plist</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Seagate/Seagate Storage Gauge.app/Contents/MacOS/Seagate Storage Gauge</string>
        <string>-doautolnch</string>
        <string>/Library/Application Support/Seagate/Seagate Storage Gauge.app</string>
        </array>
        <key>RunAtLoad</key>
        ...and 3 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist
        - mod date: Feb  6 13:35:20 2015
        - checksum: 495358405
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bombich.ccchelper</string>
        <key>MachServices</key>
        <dict>
        <key>com.bombich.ccchelper</key>
        <true/>
        </dict>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.crashplan.engine.plist
        - mod date: Jan 10 11:46:36 2015
        - checksum: 757054163
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.crashplan.engine</string>
        <key>UserName</key>
        <string>root</string>
        <key>GroupName</key>
        <string>wheel</string>
        <key>Nice</key>
        <integer>20</integer>
        <key>KeepAlive</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/Applications/CrashPlan.app/Contents/Resources/Java</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/CrashPlan.app/Contents/MacOS/CrashPlanService</string>
        ...and 26 more line(s)
    Contents of /Library/LaunchDaemons/com.eltima.ElmediaPlayer.daemon.plist
        - mod date: Oct  9 06:40:45 2012
        - checksum: 1274124936
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.eltima.ElmediaPlayer.daemon</string>
        <key>LaunchOnlyOnce</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/ElmediaPlayer/empdaemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.google.GoogleML.plist
        - mod date: Mar 10 10:19:30 2008
        - checksum: 315725308
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.google.GoogleML</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Google/GoogleML/GoogleML.bundle/Contents/MacOS/googleml-modwat ch</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>UserName</key>
        <string>root</string>
        <key>WatchPaths</key>
        <array>
        <string>/Library/Google/GoogleML/Modules</string>
        <string>/Library/Google/GoogleML</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.rogueamoeba.hermes.plist
        - mod date: Jul 15 21:05:58 2008
        - checksum: 1539233627
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>GroupName</key>
        <string>wheel</string>
        <key>Label</key>
        <string>com.rogueamoeba.hermes</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/hermes/bin/hermesctl</string>
        <string>update</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceIPC</key>
        <true/>
        <key>UserName</key>
        <string>root</string>
        <key>WatchPaths</key>
        <array>
        <string>/usr/local/hermes/modules</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.vmware.launchd.vmware.plist
        - mod date: Nov  2 16:11:08 2007
        - checksum: 1467462916
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
                "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
                <key>Label</key>
                <string>com.vmware.launchd.vmware</string>
                <key>ProgramArguments</key>
                <array>
                        <string>/Library/Application Support/VMware Fusion/boot.sh</string>
                        <string>--start</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.zqueue.servetome-server.plist
        - mod date: Sep 22 07:54:14 2014
        - checksum: 1392131937
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/Library/Application Support/ServeToMe/incoming/settings.xml</key>
        <true/>
        </dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Label</key>
        <string>com.zqueue.servetome-server</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.zqueue.servetome-server</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ThrottleInterval</key>
        <integer>5</integer>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
        - mod date: Nov 11 12:21:11 2014
        - checksum: 4111951265
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>jp.co.canon.MasterInstaller</string>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/jp.co.canon.MasterInstaller.socket</string>
        <key>SockType</key>
        ...and 5 more line(s)
    Contents of /Library/LaunchDaemons/net.sourceforge.MonolingualHelper.plist
        - mod date: Sep 16 12:53:32 2012
        - checksum: 4229206510
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>net.sourceforge.MonolingualHelper</string>
        <key>MachServices</key>
        <dict>
        <key>net.sourceforge.MonolingualHelper</key>
        <true/>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/net.sourceforge.MonolingualHelper</strin g>
        </array>
        </dict>
        </plist>
    Contents of /System/Library/Security/authorization.plist
        - mod date: Jan  7 19:31:13 2015
        - checksum: 2720110640
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 1850 more line(s)
    Contents of /private/etc/authorization.deprecated
        - mod date: Sep 30 13:39:21 2013
        - checksum: 2773682028
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 9729 more line(s)
    Contents of /private/etc/ssh_config
        - mod date: Oct  1 12:06:10 2012
        - checksum: 1281775184
         Host *
           SendEnv LANG LC_*
        Host *
            XAuthLocation /opt/X11/bin/xauth
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
        - mod date: Aug 21 15:00:01 2010
        - checksum: 2170691092
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.amazon.cloud-player.plist
        - mod date: Feb 22 10:43:22 2014
        - checksum: 2707474481
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnableTransactions</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.amazon.cloud-player</string>
        <key>Program</key>
        <string>/Applications/Amazon Cloud Player.app/Contents/MacOS/Amazon Music Helper</string>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.amazon.music.plist
        - mod date: Jan 12 15:51:16 2015
        - checksum: 3668832669
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnableTransactions</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.amazon.music</string>
        <key>Program</key>
        <string>/Applications/Amazon Music.app/Contents/MacOS/Amazon Music Helper</string>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
        - mod date: Feb 17 09:08:58 2015
        - checksum: 1189540302
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.FolderActions.folders</string>
        <key>Program</key>
        <string>/usr/bin/osascript</string>
        <key>ProgramArguments</key>
        <array>
        <string>osascript</string>
        <string>-e</string>
        <string>tell application "Folder Actions Dispatcher" to tick</string>
        </array>
        <key>WatchPaths</key>
        <array/>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
        - mod date: Jul 31 12:13:01 2010
        - checksum: 2859079559
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.Safari</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
        <string>--sync</string>
        <string>com.apple.Safari</string>
        <string>--entitynames</string>
        <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>ThrottleInterval</key>
        <integer>60</integer>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
        </array>
        </dict>
        ...and 1 more line(s)
    Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist
        - mod date: Feb 17 01:22:03 2015

Maybe you are looking for

  • EPM 11.1.2.3.500 patch query

    Hi, Planning to apply the .500 patch ie., Release 11.1.2.3.500 Patch Set Update (PSU): 17529887 How do I go about applying the patch. Can I apply the patch on both servers (server one is application server - shared services, planning, r and a, eas, s

  • My phone is still

         I erased my phone online after is still, and I do not know where is it now. I want back - find my phone program-    Serial No: DN*******FG9 <Edited by Host>

  • Vpn in window server 2008

    Hello, I am connect to our office windows server 2008 server using native vpn. Connection succeed but i cant ping any adress on this network neither use remote desktop for mac. If locally in the office, everything works fine so it is a vpn configurat

  • How to Add New Object?

    HI, Any body can say how to add new object. For Example: The Document need to link with Invoice Transaction (T.Code: VF01, Table: VBRK/VBRP). Points will be rewarded, if information is useful. Tks Mani.

  • Can't deploy Simple 2.0 CMP Entity Bean into Sun One Server 7

    Dear all: I use JBuilder9 + SunOne Plug-in to build a Simple Entity Bean, but I can't deploy it into SunOne 7 Server that return error message: Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- -- Error while processing