Firewall on installing pppoe-setup [solved]

On installing pkg 'pppoe-setup' one of the questions asked is about the kind of firewall needed, whether not or standalone desktop.... I choose dekstop (all in blocked). But on checking the pkgs installed, i dont see iptables.
So which firewall it starts or does it blocks in some other way.
Have to open a port for torrent and stuck.
installed gufw and opened the port from there but still blocked.
Last edited by net.reg (2009-10-02 10:49:22)

The config is in /etc/ppp/pppoe.conf. Just change the firewall to none, I guess.

Similar Messages

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

HT5569 Hi is it possible to install and setup a modem with an iPad only, I would appreciate an answer to this question thanks

Hi is it possible to install and setup a modem with an iPad only, I would appreciate an answer to this question thanks

The configuration page of my router on Safari (tap to enlarge)
See IP Adress at the top (center)

Setting up encryption on an already installed Arch setup?

Recently I have been thinking about setting up encryption on my already installed Arch setup. I would reinstall and encrypt it that way, however I do not have an external HDD big enough to back up everything, so I was wondering if it is possible to encrypt a hard disk on an already installed Arch setup. I have two partitions, /dev/sda1 and /dev/sda2, and would like to encrypt both while not having to reinstall.
Can anyone help? Thanks!
Edit:
Alternatively, could I reinstall it and use encryption in the install in such a way that it retains my file contents?
Last edited by ThatPerson (2013-07-30 12:41:13)

I use rsync rather than tar to do what Stebalien is suggesting here. I use btrfs, and my root filesystem is actually a subvolume. So I mount the entire btrfs filesystem (from subvolid=0) at /var/lib/btrfs-root. By doing this, it makes it much easier to simply rsync (or tar) from that mountpoint to the backup mountpoint. This makes it so that I can actually backup the system I am running off of without explicitly excluding all the volatile directories (like /sys, /tmp, /proc, etc.) Though I think a more sane approach, since I use btrfs, would be to snapshot each subvol and rsync those instead.
I guess what I am trying to get at, is that if you were to create something like /mnt/system and /mnt/backup. If you mounted your rootfs to /mnt/system (and then possibly your home partition to /mnt/system/home), then mount the backup destination to /mnt/backup, you could simply do something like:
# rsync -aAXv /mnt/system/* /mnt/backup
Then of course you would have to put it all back after you set up Luks/dmcrypt.
This installation I use has been through a few different drives and trying and removing Luks/dmcrypt. I have also changed filesystems, switched to LVM2, tried mdadm RAID0, mdadm RAID1, and eventually went back to btrfs. So as mentioned above, there is really no need to reinstall just to change the underlying layout of the HDD/SSD. Of course this assumes that you have a spare drive with the space to copy your entire filesystem to... but then you should have backups anyway, right?

Download install and setup

first computer and would like to learn how to do this.

Hello Pat. Im not sure of the computer it was given to me and older one. But Im trying to download install and setup the Adobe flash player to the computer to download music on the computer. Ive done what it said to do but it keeps taking me back to the same site to download. As I stated this is my first computer and I know "NOTHING" about a computer. Im learning this on my own. So Im asking that you my be able to show me how to do this download install and setup.

Install Hardware setup utility - Invalid Serial Number

Hi,
When I try to install "Hardware Setup utility" 1.48.0.11C or 1.48.0.09C on my TOSHIBA X200-245, I obtain the message error "invalid serial number" (in French : Le numero de serie est incorrect).
How can I do ?
This utility isn't nom on my notebook.
Thanks

Hi,
My OS is Vista SP1 (Version SE : Microsoft Windows Vista edition Familiale Premium 6.0.6001 Service Pack 1).
Initially, the version was 1.48.0.11C. I made a mistake. I removed it from my notebook X200-245.
When I use Toshiba diagnostic tool, the displayed serial number is good. When I try to install Hardware setup utility, the message error says that it is invalid.
Best regards.
Jean

I must install and setup TDPO on all nodes RAC?

Hi, everyone
I have oracle rac 9i four nodes and filesystem archivelogs per hosts. without NFS.
my question is. Is necesary to backup de archivelogs install and setup TDPO on each node? and by the way. The node_name is tdpo.config it must be the same on all nodes rac.?
Many Thanks.

A good place to start is http://www.bombich.com/.

I had been using Pufffin browser for playing flash palyer on my iPad2. Now my puffin browser stopped working and I get a message saying that "A Firewall is installed between your device and internet". Is there a solution to this probelm??

I had beeen using Puffin browser for running flash player on my iPad2. Now the Puffin browser is not getting connected and I get a message saying that " A Firewall is installed between your device and internet". Can somebody suggest how to resolve this???

Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG

Re: Qosmio X300 - "Wrong serial number" if I install hardware setup

Hi!
My computer is Qosmio X300-11W. I've jist installed a new Windows Vista Ultimate 32-bit.
I installed all drivers from the list wich I recieved from Toshiba's technical support. But the problem came up when I tried to install "Hardware Setup", I've got a message "Wrong serial number". I can't understand which serial number is wrong.

Hi
As far as I know this error message appears if your mainboard was exchanged from an authorized service provider and they did forget to set the correct serial number.
So I think you should contact the nearest authorized service provider. The technicians can try to help you.
Here you can search for an ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider

PPPoE Setup

I just purchased the Apple Extreme Wireless N router, and thought that the PPPoE setup would be much easier than my previous Linksys router.
I previously had the modem connected to my G5 directly and it worked perfectly. Anytime I involve a router it doesn't work. However, with the Apple router all 4 lights are lit up on the modem, but the router has a blinking amber light. All I have entered is my username and password. I noticed on this forum someone mentioned that it should only be the username entered and not the full [email protected]
In order for me to connect directly to my ISP, the username has to be [email protected] Does this have anything to do with my situation? Would I be missing any other information for my router to work correctly? Thank you, any help would be greatly appreciated.

In order for me to connect directly to my ISP, the username has to be [email protected] Does this have anything to do with my situation? Would I be missing any other information for my router to work correctly? Thank you, any help would be greatly appreciated.
Erik, I set up my girlfriend's router (a Linksys) with Primus.ca, and I could not believe how difficult it was to do. Long story short - with Primus, you MUST contact customer support to get guidance on setting up your router. Their setup is NOT the norm.

UC560 PPPoE setup problem

HI all,
I recently deployed UC560 on my customer site and I had problems with pppoe internet connection. I tried various scenarios but nothing worked.
First I tried setting it up behind D-link adsl modem in bridge mode (Witch worked on site with software router/firewall). then I tried with my thomson tg780 also in bridge mode. All configuration is setup only by cca 3.2 as recomended in one situation i noticed that i got dns servers addresser from isp and nothin else. To temporeraly enable internet connection I set up thomson as router and UC wan connection as static IP.
Becouse I must deploy VPN and other features of UC i realy need to solve that problem.
I would apritiate all advices.
BR,
Goran

Hi, Goran
Here is the confg that works for me.
Configuration PPPoE UC500
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group 104 in
ip mtu 1452
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username [user-name] password [ password ]
ppp ipcp route default

Help needed in laymans language to install and setup OfficeJet 8600

Please bear with me. I am a technologically challanged grandma. I am also a loyal HP user. I was recently forced to retire my 8 year old HP 1610 all in one and replaced it, at the suggestion of several saled people, with a new HP Officejet Pro 8600 all in one.
I want to be able to print to the 8600 from my 8 year old Compaq SR 1550NX Presario desktop computer (running Windows XP Home edition ver. 2000 with service pack 3, with Athlon 3500 + processor, 2.4 GHz, 200 GB hard drive) AND from my 3+year old HP G60-243CL Laptop (running Windows Vista (AMD Turion X2 processor, 2.10 GHz, 32 bit opr. sys. Wi-Fi certified).
I have these 2 computer set up on a LAN here in my home connected by a Belkin N+ Router (Ver. 2110) . My Internet service is provided by Charter Cable (NOT DSL). I am read a lot of the directions and help instructions and am still in over my head. Could someone please give me a step by set method of how I can install and set up this new 8600 so I can print from both computers. The old desktop one has never been wirelessly connected. Can I do it through the Router and if so, how? Thank you very much for helping.

Hello, I will gladly assist you with these steps. Have you already set the printer up physically? Are the ink cartridges set in and the printer is ready, just waiting to be downloaded to the computer? If you still have the CD that came with the 8600 printer, all you have to do is place the CD in and click SETUP. This will guide you step by step to install.
Now the tricky part is how you want the 2 PC's connected. You can go USB (hardwire from printer to computer), Wireless (set the printer up on network and PC on network with NO cords attached, or you can go Ethernet (a cord going from the printer to the router).
Let me know how you are able to connect, and I can guide you through those steps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Driver won't install and setup won't finish on windows 8.1 64bit

Hi
We have a HP PSC 1410 All-In-One installed on an old pc with windows 7 and the printer is working fine but I decided to move the printer and plug it in on my brand new ultra high end gaming pc with win 8.1 64bit on it for obvious reasons, because the pc is alot faster. Pc config: i5 2500k 4GHZ, 16 GB RAM, Nvidia GTX 970 4 GB, you get the picture a very fast gaming pc lol.
I downloaded the proper driver on the hp support website and started the setup and windows doesn't recognize the printer and the driver.
Everytime I uninstall and reinstall the driver I get this error:
It seems to be my even though HP claims that they have windows 8.1 driver support for my printer, it actually doesn't support it. Because I even tried to install it on my HP (the irony lol) laptop with win 8.1 on it and it doesn't work. I get the same problems and errors.
So to recap it: setup won't complete, gives me an error and then uninstalls the software by itself ....
Can anyone confirm that this specific printer model works on win 8.1? If yes, why doesn't it work on both my pc and laptop with win 8.1? Why does it only work on my old pc with win 7?
It's really a shame because the printer (even though it's very old) is still great and I like it, I just wish it would work on my new pc.
If anyone knows how to fix this or with a workaround please do share.
Regards
Elvis

Hiya @Elvis29,
First and foremost, I apologize for the delay, I have been researching what could be causing this issue, and more importantly what we can do to resolve it.
Please complete the following steps and let me know the outcome of your efforts;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
I think in order to get the install package to install properly it would be best to unlock the admin account, then try to install again.
Let's begin with a clean boot first; How to perform a clean boot in Windows
How to Unlock Admin Account:
Open an Elevated Command Prompt in Windows 8 & 8.1 (Instructions here)
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked
Under the Administrator account download and install the drivers using the Printer Install Wizard.
The Printer Install Wizard will by pass the Windows Installer. This runs its only installer or install shield, which will interact independent of the Windows Installer. This may allow the file that cannot be found, to be found and let the install finish. HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
If everything installs fine, log out of this account and back into your normal user account. All the Software and Drivers for your product should show installed now on your account.
If everything works fine, you will want to Hide the Administrator account.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please keep me posted.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Firewall on installing pppoe-setup [solved]

Similar Messages

Maybe you are looking for