Firewall ports for Zone Sharing and Subscription?

Hi again!
What firewall ports need to be open for Zone Sharing and Subscription?...

Hello,
we updated from 11.3.1 to 11.3.2
Now i can not run the command chkconfig -a novell-proxydhcp to set the proxydhcp to autorun because i get...

Similar Messages

Firewall Port for DHCP 2012 R2 Failover (Load Sharing mode)

Hi Everyone,
I was wondering if anyone can help me with finding a document for required Firewall Ports for DHCP 2012 R2 Failover (Load Sharing mode)
or just confirm if this is correct or not ?
TCP 647 for
DHCP failover messages between DHCP servers
TCP/UDP 67 and 68 initiate communication between the client and server
I am not sure if there is anything else
thanks in advance
Reza Negarestani

it was for a technical design document and I put this table for Firewall requirements what do you think ?
Direction
Port(s)
Bidirectional
TCP 647
Bidirectional
TCP 2535
UDP 2535
Bidirectional
TCP 67
TCP 68
UDP 67
UDP 68
Reza Negarestani

HT4557 I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

Hello daltonfromgbr
Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
-Norm G.

CS5.5 Import for runtime sharing and preview problem

Hello
I'm having a strange issue with CS5.5 and the import for runtime sharing settings. Here's what I'm doing: I create two .fla's, Export.fla and Import.fla. In Export.fla, I create a shape, select it, press F8 and tick export for runtime sharing, to create a really simple exported movie clip. I click the exported symbol in the library, press Ctrl-C, switch to Import.fla and press Ctrl-V. Everything ok so far, the symbol is imported for runtime sharing.
The first problem I have at this stage is that changes I do to the exported symbol in Export.fla are not reflected in Import.fla, only in the final .swf's I can see the changes. Also, unlike in CS4 and CS5 I cannot "Update" the imported symbol in the library right-click menu, to make changes to Export.fla visible in Import.fla. The menu entry is just greyed out...
So I tried to use Authortime sharing, in the Symbol Properties for the imported symbol in Import.fla. I link the source to the symbol in Export.fla, and once I do that, everything is completely borked. The previously imported symbol is no longer imported. Whenever it is changed in Export.fla, it gets an "Export for Runtime Sharing" tick in its Properties in Import.fla, and worst, it is not shared at runtime, like I need it to.
Can anyone tell me how to get the "normal" CS/4/5 behaviour in CS5.5: a runtime shared symbol, that can be updated in Import.fla (I dont care if manually or auotmatically) when I change it in Export.fla, and which also is runtime shared?
Cheers
Ulf

Hi, JonnyDiamond
Thank you for reporting the issue for runtime sharing settings affected by authortime sharing. It is fixed for parent symbols in Flash Pro CS6, but we just recognized it is not for nested items.
As an alternative to deleting and re-copying the symbol, we see the following steps restore the original settings of the nested bitmap symbol (png in your case) for importing runtime shared library. After you open Bitmap Properties dialog of the bitmap symbol, go to ActionScript section and:
1. Uncheck Export for ActionScript
2. Check Import for runtime sharing
3. Input the path to Library.swf in URL
4. Click OK twice
Please try these steps to see if they work for you. If they do, the simalr steps can be processed via JSFL script. It would be something like this:
//// To restore the settings to import runtime shared library //////
// Get Library items
var myItems = fl.getDocumentDOM().library.items;
// Store an item from myItems
var myItem;
// Path to runtime shared library. Change this to your path
var pathToRSL = "Library.swf";
// Go through Library
for (var i = 0; i < myItems.length; i++)
          myItem = myItems[i];
// Change the condition to suit to your Library
          if(myItem.itemType == "bitmap" &&
             myItem.name.split(".").pop() == "png" &&
             myItem.linkageExportForRS == true )
    switchRSSettings(pathToRSL);
// Disable Export for runtime sharing and
// enable Import for runtime sharing
function switchRSSettings(path)
          myItem.linkageExportForRS = false;
          myItem.linkageExportInFirstFrame = false;
          myItem.linkageExportForAS = false;
          myItem.linkageImportForRS = true;
          myItem.linkageURL = path;
///////////////////////// End of Script ////////////////////
We hope this would help you workaround the issue. Again, thank you for your report!
Thanks
Toshi

HT1727 How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

Firewall ports for B2B ( Telepresence with CUBE)

Could any body let me know what firewall port need to be open for B2B set up telepresence with CUBE on SIP trunk.
Please suggest
Regards
Gautrav

Hi Harold,
Please check the link for all SAP port related information
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4e515a43-0e01-0010-2da1-9bcc452c280b?QuickLink=index&…
Thanks and regards,
Nikhil

ZAC Firewall ports for getting runtimes?

Hi guys,
I am trying to create some simple ZAC applications for exemple IE8. I'm adding the Adobe 9.0 and .NET3.5 Runtimes to the app and I'm getting a 401 error. I know that there's a lot of firewall restriction where I am and I wanted to know if there's some ports that needs to be opened for this to work?
My next step is to test the same thing on a different network to see if this is an installation problem. I am using 8.0.3 right now on XP.
Thanks!

sebastien,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Apple ID for home sharing and iTunes Store should be the same?

I've got 2 iTunes Store accounts, my girlfriend has one, and we're just moving in together.
A few questions ...
Can I create a 4th 'Apple ID' for our home sharing?
Would we still be able to listen to each others libraries?
Would we still be able to copy songs from one another, like I can with my 1 account between computers?
Are there any other downsides to creating a separate account for home sharing?
Thanks for your help.

Can I create a 4th 'Apple ID' for our home sharing?
yes.
Would we still be able to listen to each others libraries?
yes.
a single iTunes can be authorized for up to five iTunes store accounts.
Would we still be able to copy songs from one another, like I can with my 1 account between computers?
yes.
Are there any other downsides to creating a separate account for home sharing?
none i'm aware of.

HT4352 problem sharing iTunes with new Apple TV.(model MD199LL/A. I have iTunes and Apple TV set up with same address and passwords, enabled iTunes and Apple TV for home sharing and still nothing? I have latest iTunes and Apple TV update. Any other sugges

Have a problem with Home Sharing with Apple TV and iTunes. Have latest iTunes and Apple TV downloads. Have both items set up for home sharing with same address and passwords. AppleTV running fine for everything else. FYI, my library is about 60gigs. AppleTV model is MD199LL/A if that matters. Really want to hear my entire music library and not just Purchased items. Thanks for any help!!!

I have an older PC with Windows XP Professional on it. I updated to the latest iTunes and I am able to access the photos, etc. on it. However, my Windows 7 PC still does work (since last Apple TV update). Apple TV does not recognize that Home Sharing is turned here. The latter PC has all my current photos on it which I would like share with others on my Apple TV. A fix would be appreciated.

"Import for runtime sharing" and dynamic loading of MC

Hello to everyone :)
I have a question that possibly is a bit strange, but I
really didn't found any info about it (that's why I'm writing a
post here).
So, I have five .swf files with different sections of one
project. I'm loading these movies only when they are needed. So far
nothing really special. The big question is: is there a way to
import a visual snapshot of them, or import them into the main .fla
so I can see them and align them without going to xx.fla and move
the MC i want.
I know that importing for runtime sharing, make the things
appear in the main movie, but how can I import them dynamically
only when I need them?
In other words I want to see the other movies in edit mode in my
main movie (this will be a HUGE facilitation for designing the
project) and to import them dynamically... if it's possible!
I hope this explanation is clear enough :) If it's not I'll
do my best to clarify it!
And I want to apology if this post is not in the right place!
Thank you for your time and attention in advance!!!
Best Regards,
Lyubomir Kirilov

Hi Frowin Keiser
I think the problema is the extension of file.
In the Internet Explorer (any browser you are using), go to the Save as...
Check if the extension is .xml

Firewall Ports for Web Services

Hi Experts,
Can you please list what are the firewall ports to be opened to call a ECC 6.0 system web service from a .Net application, assuming both systems are separated by a firewall
Thanks in advance
Regards,
Krishna

Hello ,
Please as far as i know you have to open 4 ports in the ecc system.
They are
Message server port = 36<instance number>
ITS = 80<Instance number>
Gateway = 33<instance number> -- make sure service entries are maintained (sapgw)
If you maintain Central SLD - then the specific port needs to be opened. - 5(instance number)00.
I hope these ports needs to be opened and this is enough, I believe.
Vijay.

Best Practises for File Sharing and Print Server on Windows Server 2012

Is it better to have File Sharing and Print Server installed on the same Windows 2012 Server ?
Or, they should be installed on 2 different Windows Servers ?
Hussien Sherief

It will work just fine to combine them.
But most people would recommend keeping functionality separate... if the budget allows. That whole "single point of failure" concept. If that server dies, you've lost both of those functions.

How to configure Growl notifications for File Sharing and Address Book...

Heya,
So my team and I constantly add new contacts to Address Book and drop files via File Sharing and I would love a way to push growl notifications to people's computers when these actions occur. Or even send emails. Does anyone know how I could accomplish this? If so, can you reference a tutorial or guide of some sort? Thanks!

The export function from iCloud creates one single .vcf file with all the addresses in it. If you click on it on the desktop, it starts displaying each and every address as a separate vCard. However, "Tools/Import...Address Books...vCard file" doesn't do anything.

Firewall ports for shared computers (bonjour) to appear in Finder?

This is the setup:
my Lion server is in a different subnet (DMZ) then the workstations (LAN) through the means of a third-party firewall
the Lion server has File Sharing enabled
the workstations can access the share points by connecting to the server (connections from LAN to DMZ are permitted)
The problem:
the Lion server wont's show up in the workstation's finder (shared computers AKA bonjour)
The question:
what ports need to be opened from DMZ to LAN in order for the Lion server to announce itself to the clients?

A work around that may work for you (does for me) is simply to keep the errant PC from sleeping during the period that you may want to connect to it. That's right. Torture is by depriving it of sleep. It's a PC; it deserves it, right?

Can I convert a PB 1400's PC card port to a ethernet port for file sharing?

My plan here is to connect a PowerBook 1400cs/133 running OS 8.6 to an iBook G4 running OS 10.4 by means of an ethernet crossover cable, and move my important files (ClarisWorks 4.0 docs and games mostly) to the new computer. But the PB 1400 has no ethernet port! Is there something I can put in the PC card slot that will convert it to an ethernet port?

jpl, Denis, here's my setup:
The PB 1400 is connected to the iBook via a Farallon EtherWave/EtherMac Ethernet PC Card (with a blue arrow, PCMCIA 2.1, PC Card Standard). I have the Farallon software installed and the Farallon extension turned on. A "Farallon EN Card" icon appears on my desktop, and the little light on the cord where it connects to the card is green. I used to use the card to connect to the internet back in the day when the 1400 was my primary computer, so I'm confident it works.
The PB 1400 (name: Ben's PowerBook 1400): AppleTalk, configured to connect via alternate ethernet. File sharing, on. TCP/IP, connected via AppleTalk (Mac IP). I've tried configuring that both "Using Mac IP server" and manually by entering in the iBook's IP address and router address (the 1400 is not connected to the internet). As far as I can tell, Users/Groups is configured; it has "Ben" as "user" and "Guest" as "guest user."
The iBook (name: Ben's iBook G4) is set up basically identical to the way jpl describes his iMac above. Like his, the services panel of sharing on the iBook says "Other Macintosh users can access your computer at afp://x.x.x.6." I also manually entered the iBook's IP address, subnet mask, and router. Under my shared location, under Built-in Ethernet, TCP/IP is configured and AppleTalk is active.
Still, file sharing is not working. When I try to access the iBook from the 1400, I go to the Chooser, click the AppleShare icon, and "Ben's iBook G4" in the file server window. When I select it and click OK, I go to a screen to enter my name (Ben) and password as a registered user. I'm not sure if the password it wants is the file sharing password I set up for the 1400 or the administrator password for the iBook, so I tried them both. I also tried connecting as a "guest." In all cases, after I hit the "Connect" button, I got the error message "The connection to this server has been unexpectedly broken."
No luck going the opposite direction either. When I go to Go: Connect to Server: Browse on the iBook, "Ben's PowerBook 1400" appears in the Network area, but when I select it and hit the "connect" button, I get this error message: "The file server uses an incompatible version of the AFP protocol. You cannot connect to it."

Firewall ports for Zone Sharing and Subscription?

Similar Messages

Maybe you are looking for