Firewall rules don't seem to be working correctly
i have my firewall turned on and have rules for itunes and jungle disk to all incoming, but itunes still alerts me to change firewall settings to allow sharing, which is an annoyance, but jungledisk will not work with me adding a rule, it seems as if i have to the firewall off completely for these to work. Also my screensharing will not work now either, but i have no problem with any other apps like skype where the rules work fine. Any suggestions?
Great news, thanks!
Similar Messages
-
Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?
I've seen notes about clearing the cache but it seems that this is an older OS and I can't find the plist mentioned here because it's an older system. http://www.youtube.com/watch?v=2cL9RuDV3Qc
Thoughts? Anyone?GUYS, I NEED HELP !
ANYONE? -
For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?
It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here. Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it. Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model it was reading).
Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard install disk in, held down 'C' on restart and let it run.
Didn't take anything off the HDD first, just ran the install disk over everything.
The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
Good luck on working this one out. -
I can't seem to remember my apple password and also the answer to my security question seems to be incorrect. Apple don't seem to have the correct email down either so I have no way of resetting my password, what do I do??
Foziakhan,
If you are referring to your Apple ID password, call Apple (1-800-MY-APPLE) and ask to speak to the Account Security Team. They will be able to assist you with resetting your security questions and also the password.
Hope this helps. Good Luck! -
My old Apple ID was tied to an email address that I no longer have access to. My security question answers don't seem to work. Is there any other way to retrieve my password?
I have a new Apple ID - I would love to be able to merge them. Is that possible?You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(90031) -
%@ page import="..." % does not seem to be working correctly
Hi,
I am running Weblogic 6.1 sp1 and I am having a problem with import page
directive. <%@ page import="my.package.*" %> does not appear to be working
correctly when I try to reference classes in imported packages (my.package,
etc.) from the useBean tag.
The following code works with Resin, but not Weblogic:
<%@ page import="my.package.*" %>
<jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
If, I take out the page directive, and change the useBean tag to:
<jsp:useBean id="errorBean" class="my.package.ErrorBean"
scope="request"/>
then the page compiles and runs just fine.
Michael
Here's a snippet from Sun's j2ee tutorial
(http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPBeans4.html):
<jsp:useBean id="beanName"
class="fully_qualified_classname" scope="scope"/>
But I agree with you, the excerpt you posted seems to include the
useBean tag, which is misleading.
Nils
Michael Hill wrote:
>
> I don't think this is the way it is "supposed" to be. Here is an excerpt
> from the JSP Syntax reference on http://developer.java.sun.com
> on the page directive:
>
> import= "{ package.class | package.* }, ..."
> A comma-separated list of one or more packages that the JSP file should
> import. The packages (and their classes) are available to scriptlets,
> expressions, declarations, and tags within the JSP file. You must place the
> import attribute before the tag that calls the imported class. If you want
> to import more than one package, you can specify a comma-separated list
> after import or you can use import more than once in a JSP file.
>
> ---
>
> It says the packages are available to tags within the JSP file as long as
> you place the import before the tag that calls the imported class. In my
> case, I am placing the import before the <jsp:useBean> tag.
>
> Michael
>
> "Nils Winkler" <[email protected]> wrote in message
> news:[email protected]...
> > I'm pretty sure that you have to specify the fully qualified class name
> > in the useBean tag. import won't help you here.
> >
> > Nils
> >
> > Michael Hill wrote:
> > >
> > > Hi,
> > >
> > > I am running Weblogic 6.1 sp1 and I am having a problem with import page
> > > directive. <%@ page import="my.package.*" %> does not appear to be
> working
> > > correctly when I try to reference classes in imported packages
> (my.package,
> > > etc.) from the useBean tag.
> > >
> > > The following code works with Resin, but not Weblogic:
> > >
> > > <%@ page import="my.package.*" %>
> > > <jsp:useBean id="errorBean" class="ErrorBean" scope="request"/>
> > >
> > > If, I take out the page directive, and change the useBean tag to:
> > >
> > > <jsp:useBean id="errorBean" class="my.package.ErrorBean"
> > > scope="request"/>
> > >
> > > then the page compiles and runs just fine.
> > >
> > > Michael
> >
> > --
> > ============================
> > [email protected]
============================
[email protected]
-
Don't think CoreCenter is working correctly
I desided to see what kind of temps I would get if I ran just the slower running of my 2 120mm fans last night. I started out with a reading of 22c. Which is about that of the room I was doing the testing. Well I started to run prime95 to load test it and see how it held up. So I was wanting was watching the temps and to my amazement they went down. In fact they went down to 13c which is way cooler than my room since I was sitting there in shorts and a tee shirt. Is there anything I can do to correct this? I am also questioning my reported voltages I find it hard to believe my system is rock steady with a 3.3v rail @ 3.12 and a 12v rail @ 11.61.
I like the idea behind this CoreCenter but if the data I am getting is incorrect what is the use.Hello,
1) Core Center, almost 90% Of the time, is WAY off, or doesnt work correctly.
2) Bios Temps Are More Accurate
3) Try Speedfan, Its More Accurate, as it reads from bios. Just do a google search for "Speedfan" -
Sa-update runs but rules don't seem to execute after restore
Hello,
After a hardware-related issue I needed to do a server restore. In general, things seem to be up and running.
One problem: the spam volume has increased. As I scanned through sample messages, I think the issue is that the rule sets that sa-update keeps current are downloading but not actualy being run. I don't see any errors to suggest per se, just circumstanial indications elsewhere. For example, the additional scoring parameters aren't showing up in headers added by amavisd in the mail messages, suggesting they're not being run.
I am admittedly not very experienced with managing the rule sets. If anyone has any advice on what's going on (or a means to verify that they are running) -- I would be most appreciative.
Thanks.Hi Joe,
Actually I was accessing DU with the restore disk in the drive, but no menu. Didn't have to hold any key down during startup. It would either want to install or give me access to DU. I did all the DU stuff numerous times. Sometimes it would give me errors on verify at which point I would repair until it said it was ok, other times it said it was ok. After each time, I tried to install...no go.
Holding C down only gives me the ? screen. I have to hold Option. That's how I figured out how to get to the cd's menu. Tried DU fixes from there...no go. I'm on my second attempt at restoring, but the copying bar is moving so slowly that it will take days at this rate. It's about 1/10th of the way after about 3 hours now. At this point I don't even think it's making any progress. No sounds from the optical drive. I think I hear the hd working, but not positive.
The first time it seemed to stall, I forced quit and when I went to DU, it showed Powerbook G4 software on the HD, which is what the optical drive lists is on the cd. It still wouldn't start without the cd in there tho. How long should this restore take if it's working?
This is driving me nuts...very frustrating. Nothing about a pc seems to apply here. At least on a pc, when you erase &/or partition a drive, you can install the os. I am absolutely regretting not getting a pc notebook instead. I'm a Digital Media Design student and instead of working elsewhere on projects that have deadlines, I'm not only not working on my projects, but am stuck at home bouncing between 3 computers (pc for internet, imac for converting downloaded files that aren't helping, and getting absolutely nowhere with this notebook. Sorry for venting, but I'm pretty proud of myself for not using profanity at this point.
Linda -
Firefox is already running, but is not responding? Simple answers don't seem to be working
I started Firefox earlier today, and got a message about a Firefox issue and that it needed to be reset. Since the other option seemed worse than reseting, and Reseting Firefox seemed relatively painless, I clicked okay. A brief message popped up about successfully saving passwords, bookmarks, etc. Then a smaller window appeared, saying it was cleaning up Firefox. During that, the process seemed to freeze up. I closed it out, killed any firefox processes running, and tried to restart Firefox, when I got the "Firefox is already running, but not responding." message. There's a folder on my desktop labeled "Old Firefox data" which I assume came from the Firefox Reset (There's also now a copy of the profile on my desktop, just incase).
https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding
I found this and have been trying to work through it, but it doesn't seem to be helping.
1) Ther'es no Firefox.exe in my taskmanager, nor is there a plugin-container process.
2) I deleted the "parent.lock" file in both the profile (Which is just a bunch of jumbled letters and numbers with "default" in it), and the Old Firefox folder. However, these files were just "parent.lock" not "parent.lock.parentlock"
3) I didn't change the name on it, so unless the reset did before it locked up, I have no idea what to change it back to.
4) Its not a file share, so...
5) This might be a possibility. The Firefox folder that my profile is in is "Read Only" but I can't seem to change that. Everytime I go in, unselect "Read Only" and tell it to propagate the change through the subfolders, it seems to work, but when I check the properties 10 seconds later, "Read Only" is checked again.Sounds that the profiles.ini got corrupted when removing the old default profile and adding the new profile.
*http://kb.mozillazine.org/profiles.ini_file
You may have security software that was preventing Firefox from making changes to the file.
You will have to use the Profile Manager to either restore an existing profile or create a new profile.
A "Reset" creates a new default profile with a time stamp appended and tries to import some settings from the old profile leaving the old profile intact, including the (invalidated) cache folder (about:cache) that can take up to 1 GB.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox 15+ versions will move the old profile folder to an "Old Firefox Data-##" folder on the Desktop that gets a number appended if you use reset more than once, so you can no longer use the profile manager to revert to the old profile.
See also:
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows -
Help and Mail search don't seem to be working properly in Mountain Lion.
When i search for a keyword in mail and specify 'Entire Message', I don't get any results. Also, the OS X help function is not giving me any results because it says that it can't connect to the internet. The internet is connected and working normally in all other applications.
Regarding Mail, the entire message search uses Spotlight to find results. Is your Spotlight icon (magnifying glass) in the dock still indexing, or otherwise corrupted?
You may wish to just add and then remove your main hard drive from the Spotlight privacy pane. This will cause Spotlight to re-index the whole drive, and once that's done (it may take a few hours) the searches would work.
I'm not sure on Help... Any chance you're behind some sort of proxy server? -
IPhoto keyword don't seem to be working
I've got some photos in iPhoto from vacations. They've got keywords of where they're from. If I type in "Myrtle" in spotlight, I get all of the pics from our trip to Myrtle Beach.
I recently took a trip to Cunningham falls State Park in Maryland. I imported all of the pics into iPhoto and keyworded them. But if I go to spotlight, and type in "Cunningham" none of the pics come up. I checked the spelling. I waited a few days wondering if it takes time for the computer to realize it needs to index these. I tried a couple of other keywords for some other recently entered photos and no dice.
This isn't a major issue, but still it should work! I can't say for sure if this started specifically when I updated to iLife 6 or not, because I can't remember precisely when I did that.
Anyway, is anyone else having this issue and does anyone have any suggestions on what may be causing it / how to fix it?
Thanks,
Dan P.Yes, a fair number of people have had the problem, but they all seem to hang out in the iPhoto forum!
Take a look at this discussion there:
http://discussions.apple.com/thread.jspa?messageID=1727966�
If you're lucky one of the easier solutions may work for you.
Francine
Francine
Schwieder -
I am using a Mac, and need to have my profile be on an external drive. I edit the profile.ini file per the instructions I found here:
https://support.mozilla.org/en-US/kb/profiles-tb
but it's not working. I must have the path wrong. Again, I am using a Mac. Here is the info in the profile.ini file:
[General]
StartWithLastProfile=1
[Profile0]
Name=default
IsRelative=0
Path=Macintosh%HD/My%20Passport/Thunderbird/Profiles/o6fqy09d.default
Default=1
Do you see anything about the path that looks incorrect? The "My Passport" is the external drive.
Also, if there was an updated disk image for Portable Thunderbird, I could try setting that up but all I can find is a very old one which I tried but it won't update.
Thank you,
ToddThe "My Passport" external drive must be mounted somewhere in the file system. That's the path you need to use.
-
AME rules does not seem to be working properly
Hi ,
Product : EBS --11.5.10.2 AME B rollup 2 .
In AME B Transaction type -Purchase Requisition Approval.
I created custom attribute :Line Item : Calc_reqline_total :
Calculate requisition line total group by category segment1 and attribute7 as below
select suma from
select sum(prl.unit_price * prl.quantity) suma,prl.attribute7 attr,mck.segment1 cat1
from mtl_categories_b_kfv mck,
po_requisition_lines_all prl ,
po_req_distributions_all prd
where mck.category_id = prl.category_id and
prl.requisition_header_id = po_ame_setup_pvt.get_new_req_header_id(:transactionId)
and prl.requisition_line_id = prd.requisition_line_id
group by prl.attribute7,mck.segment1
po_requisition_lines_all prl1,
mtl_categories_b_kfv mck1
where prl1.requisition_header_id =po_ame_setup_pvt.get_new_req_header_id(:transactionId)
and prl1.attribute7 = attr
and mck1.category_id = prl1.category_id
and mck1.segment1 = cat1
order by prl1.requisition_line_id
No I defined condition : Category Segment1 in "Med Supplies"
Category Segment1 in " Furniture"
30,000=<Requisition total =<50,000
30,000=<Calc_reqline_total =<50,000
1000 =<Calc_reqline_total=<5,000
1000 =<Requisition total =<5,000
Approval Group : Approver 1 --
Approver 2.
Created Rules :
List Creation : Rule 1 for Header: Requsition_total >30K and has Line item : Med supplies as segment1 and has Line Item : Calc_reqline_total> 30K --Add approver 1
List creation : Rule 2 for header :requisition >1K and has Line Item "Furniture" as segment1 of cat and has Line Item :calc_reqline_total > 1K--Add approver 2
When I create a requisition with multiple line
3 Lines have Category segment1 as Med Supplies-- Sum of all the line amounts for these lines 32,400
2 Lines have category segment1 as Furniture --sum of all the line amounts for these lines is 600 which is less then 1K limit .
and Requisition total is 33K
When i see the final result -- Approver 1, Approver 2 are getting added to the list .
I can see the Calc_reqline_total populated properly against each line ...but when the rules are getting applied I feel its not considering this value ..
Actually speaking if the line amount grouped total is > 30K and Med Supplies is the line amount then it should add approver 1
But it is looking at Furniture also and even thogh the line grouped total is < 1K it some how is adding the approver 2 .
How shuld i Define the rule so that I get only Approver 1 when my custom attribute as in query at line level should be considered for Approver addition .
Please let me know if you wanted any clarification so that I can send sceen shots to your email if you could help.
--Chandra
Edited by: user615883 on Jun 17, 2009 11:35 AMI figured out a way to do this ....do all the custom related checks in the approval code rather than in conditions ...to keep it simple.
-
Energy and Screen Savers Don't Seem to be Working
I have a 27" iMac (early 2011) running Lion. No matter how long I set the Energy or Screen Savers for, the screen dims after less than five minutes of inactivity then goes into screen-saver mode after another couple minutes.
Any suggestions?
Thanks,
LloydHi Lloyd,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
If that doesn't do it, (not on 10.7 to see if it's the same, but older OSX info)...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
(Then Trash the original of these last two, as "moving" them only copies them.)
Then reboot once more. -
Bus / Sends don't seem to be working...
hello,
i got a Logic project from a friend that im mixing and the bus / send isnt working. i'll assign it the send to a bus, pull up a reverb and it dose not work.
any thoughts?
thanks!
Luke.with a bit more tinkering i was able to get the issue fixed.
i went into the environment window and it ended up being that the outputs of the buses were not assigned to the master out.
thanks guys!
Luke.
Maybe you are looking for
-
How to set focus on a custom PO Item screen field when in error?
Hi All, I have an interesting situation that i'm wondering if others have solved. We have extended the PO item table (EKPO) by adding two new fields. We then have implemented two BAdI's: ME_GUI_PO_CUST and ME_PROCESS_PO_CUST to add them to the ME2
-
Error in DTW while importing purchase order
Dear Experts, when trying to import purchase order ( Documents and Documents lines) ends up with an error key: DocEntry Reason: Vendor record not found application - defined or object defined error 65171 Please help Regards Jijo
-
Display Output similar to SPRO (IMG)
Hi Experts, Can we develop a display output similar to the view which we have in SPRO (IMG). Any Function Module or Sample Program. Regards, Abhijit G. Borkar
-
How can I have an email notification sent to me (it's already sent to the submitter of the form)?
I've created a form and have allowed the "email submission receipt" so an email is sent out to the submitter confirming that the person filled out the form. Is there any way to have that same email sent to me? I tried the option of using "Email Notif
-
Hi There, I just wanted to clear something up in my mind about Forte Global Events. By a Forte Global Event I mean an event that is posted in a method of an EVSO. Presumably there is no internal application logic to such a posting, as to what machine