Firewall-safari getting added to list.

ok, from time to time, I notice that Safari gets added to the list of apps allowed to get incoming info. I know I have the checkmark turned on to allow signed software. But what actions cause safari to get added to the list. Is there a log in console that I could look at that would tell me when and why safari got added.

Aaron Oneal wrote:
What appears to be happening is that Finder is not dropping the inherited permissions on a copy. I just copied the file to a folder that doesn't have an ACL and when I inspect the file permissions it still shows the inherited permissions from the source when I would have expected them to have been dropped. So of course, when I copy that file back to the folder with the ACL it again preserves the source inherited permissions, combines them with the destination, and results in the duplication.
I came to the same conclusion. Explicit permissions don't seem to be duplicated, but inherited permissions seem to be retained, and then duplicated. Funny though when I made a fresh local non-administrative account (machine is bound to OD) it would not duplicate permissions. It would only happen with OD user accounts. Also it seems to be 10.6 (client) specific. I still have quite a few 10.5.8 machines and they would not duplicate. When I get a chance I want to do a fresh 10.6.3 install and see if that version was doing it, although I don't personally believe so. Also I haven't tested on non-bound 10.6 machines. However it sounds like same effect from your research.
Then again we could get lucky and today's 10.6.6 update will fix it.

Similar Messages

What gets added to the Previous Recipients list?

I have someone whe swears some emails that he sends out aren't being add to his Previous Recipients list and therefore not auto-filling. Do addresses get added if you simply reply, or do you have to actualy type them out in a new email for them to be added?
Thanks for ANY information regarding this.

All message recipients for sent messages should be added to the list regardless how an email address is added to the To:, Cc: or Bcc: fields. If an email address is already available in the list, it won't be duplicated/added again.
This applies to a newly composed message and when Replying to - selecting Reply or Reply All for a received message and when forwarding a received message.

When does d4s get added to the list of camera that can tether on Lightroom

when does d4s get added to the list of camera that can tether on Lightroom 5?

Well, I got very tired of waiting for Adobe to support my Nikons so I use a Camranger, their computer and tablet app and tether wirelessly to LR. Yes, there is a bit of a delay amounting to a few seconds but in practice my customers love it and have not complained. I use the few seconds to better connect with them, answer questions, etc. Being wireless gives me more range of movement and I have one less cord. The Camranger goes in an old phone holster that clips to my shirt or pants pocket, connected by a 3 ft cord.
You need to enable auto import in LR and point it to the folder that Camranger saves the files to. Since it is an import you can use presets if you wish. I've not seen a downside yet and Camranger has support for new cameras very quick like. An added plus is having full wireless functionality for your camera via the Camranger apps. You can change any setting, focus, use live view, etc.. using a phone, tablet or laptop.

My iphone safari history, my 'reading list' shows visits and sites that I have never frequented. A few months back the same thing happened with my youtube history. My phone is pass protected, so its just me using it. any ideas?

My iphone safari history, my 'reading list' shows visits and sites that I have never frequented. A few months back the same thing happened with my youtube history.
My phone is pass protected, and its just me using it, phone with me all the time. any ideas?
How can things be added to my reading list/youtube???

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Safari gets stuck/very slow on some sites

Some weeks ago I did install by mistake a Mavericks Developer Pre-Release of 10.9.2 (or 10.9.3... I don't remember exactly) on my development Mac.
Since then Safari gets stuck on some sites; one of them is StackOverlow. The page loads partially then Safari hangs for some time 5-15 secs. (user interface becomes non-responsive with spinning wheel) then the page finish to load.
I was hoping the problem would have been fixed with the first public release so I didn't swiched back to the last backup (second mistake, very stupid).
Now on 10.9.5, Safari 7.1.2 (9537.85.11.5) the problem still persists.
I hope there is a way to fix the issue without reinstalling everything.
Thanks in advance for any help.
Paolo.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n -\tmod date: %s\n -\tchecksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)|\.(action|bundle|framework|kext|pkg|prefPane|service|vst)$/d;p;' 's/Pr.+n //p' ' /.kext$/ { s=system("PlistBuddy -c Print\\ :OSBundleRequired "$0"/*/I*|grep -q Sa");if(s==0) $0=$0" S"; };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n -\t"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' /[my]: /H;/^ *Lo.+: /{ H;b0'$'\n'' };$b0'$'\n'' d;:0'$'\n'' x;/: [3IU]/!d;s/.+n: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 14 31;A4 39 57 70 0;B2 15;B6 14 15 4;C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT204053 How can I get the contacts list on my iPhone to appear in my iPad Air

How can I get the contact list on my iPhone to appear in my iPad Air?

Welcome to the Apple Community.
Please try the following…
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

In htmldatatable only one row is getting added... why??

Hello everyone,
I'm designing a htmldatatable. In that I'm putting 3 columns and 3 rows. But only first row is getting added not the other 2. Why is this happening??
Here is my code....
private HtmlDataTable table = (HtmlDataTable)app.createComponent(HtmlDataTable.COMPONENTTYPE);
     _table.setValue("table");
     _table.setVar("table");
_table.setBorder(1);
     _table.setRows(3);
     int columns = 3;
// Set columns.
for (int i = 0; i < columns; i++) {
// Set header (optional).
UIOutput header = (UIOutput)app.createComponent(HtmlOutputText.COMPONENT_TYPE);
header.setValue(headers);
// Set column.
UIColumn column = new UIColumn();
column.setHeader(header);
ValueBinding myItem = FacesContext.getCurrentInstance().getApplication().createValueBinding("#{textBean.myList["+0+"]["+i+"]}");
UIOutput output = new UIOutput();
output.setValueBinding("value",myItem);
column.getChildren().add(output);
column.setId("col" + i);
// Add column.
_table.getChildren().add(column);
     getChildren().add(_table);
     setStyleClass( DEFAULT_STYLE_CLASS );
This is the bean through which data is coming...
textBean>>>
public List getMyList() {
          String[] row1 = {"ID1", "Name1", "Value1"};
String[] row2 = {"ID2", "Name2", "Value2"};
String[] row3 = {"ID3", "Name3", "Value3"};
myList.add(Arrays.asList(row1));
myList.add(Arrays.asList(row2));
myList.add(Arrays.asList(row3));
          return myList;
     public void setMyList(List myList) {
          this.myList = myList;
Thanks...

I have tried this also....
UIOutput text =     (UIOutput)app.createComponent(HtmlOutputText.COMPONENT_TYPE);
ValueBinding valueBinding = app.createValueBinding("#{textBean.myList["+0+"]["+i+"]}");
text.setValueBinding("value", valueBinding);
column.getChildren().add(text);
UIOutput text1 =     (UIOutput)app.createComponent(HtmlOutputText.COMPONENT_TYPE);
ValueBinding valueBinding1 = app.createValueBinding("#{textBean.myList["+1+"]["+i+"]}");
text1.setValueBinding("value", valueBinding1);
column.getChildren().add(text1);
UIOutput text2 =     (UIOutput)app.createComponent(HtmlOutputText.COMPONENT_TYPE);
ValueBinding valueBinding2 = app.createValueBinding("#{textBean.myList["+2+"]["+i+"]}");
text2.setValueBinding("value", valueBinding2);
column.getChildren().add(text2);
_table.getChildren().add(column);
Instead of----
ValueBinding myItem = FacesContext.getCurrentInstance().getApplication().createValueBinding("#{textBean.myList["+0+"]["+i+"]}");
UIOutput output = new UIOutput();
output.setValueBinding("value",myItem);
column.getChildren().add(output);
But not working.... :(

Help iMac w/Lion. Virus/malware Safari can't shutdown. Got pop up saying I won a prize. Did not select OK. Have to force shutdown. On restart of Safari get same pop up. Locks up Safari. Any help would be greatly appreciated.

PiCked up a virus/malware please help me get rid of it. While browsing with Safari got pop up saying I won a prize. Click OK to find out what I won. Did not click Ok, but cannot close Safari without using forced shutdown. Powering down computer and restarting then selecting Safari brings up same prize window. Just installed Trend Microsoftware for Mac. It's scanning now. Don't think it will work.
If I open another on same iMac everything seems ok.
Any help would be greatly appreciated.
Thanks

I am also running Lion and had the same problem: a persistent popup on top of a half-opened Safari window saying that I had won a prize and should click OK to claim it. If I forced Safari to quit, the same pages and popup menu would appear when I then reopened Safari. From what I can tell, the problem results simply from the fact that Safari in Lion defaults to auto-reopening web pages that were open when Safari last quit, including those suspicious pages that may have prompted the user to force-quit Safari in the first place. I solved the problem this way:
(1) After force-quitting Safari, I went to my user Library folder and found the Saved Application State folder within. I then found the folder for Safari (com.apple.Safari.savedState), opened it and deleted its contents. Now the next time I open Safari, there will be no pages to auto-reopen.
(2) Since this problem could happen again, I decided to disable the auto-reopen feature in Safari. I did this by highlighting the "com.apple.Safari.savedState" file and choosing the File-->Get Info command, and then in the Get Info box, I turned on the Locked checkbox. This prevents Safari from adding any files to this folder.
This solution has worked well for me, and it has the advantage of not requiring the user to reset Safari. It also preserves Lion's auto-reopen feature for all other applications.
I need to give credit to David Pogue for the information I used to solve this problem. He describes this procedure on page 169 of his book, Mac OSX Lion, the missing manual.
Steve

When adding or deleting contacts on my iphone, contacts get added or deleted on another iphone as well?!

So I have an iPhone 4S and my mom has an Iphone 4. Recently we discovered that whenever we add or delete contacts from her or my phone, they get added or deleted in both our iPhones. So for example: When I add a friend to my contacts, it gets added to her contact list as well. When I delete one of my contacts, it gets deleted from her contact list as well! I think it has something to do with having synced her iphone once on my laptop using my itunes but her phone doesn't have my apps, photos, or music so I don't get how this is happening. Does anyone know how to stop this?

You are logged into icloud on the same account.
Go to settings>icloud and either "delete account" (which signs you out of that account on that device) or just turn contacts off
I would recommend one of you create your own account specifically for use with icloud.
Again you can access your icloud settings by going to settings>icloud

Html gets added to all downloads!

A html tag gets added/attached to all my downloaded files (pdf's, jpeg's) YYYYYYYYYYYYYYYYYYYI ?
Using Safari 2.0.4
Gracias, 3rd post for this question.

I was wondering why you were welcoming me, just noticed that this new forum didn't keep any of my old posts or post count LOL
Well, that is one of the problems of not having the accumulated post count transfered over yet (they are working on it). I was going by the fact that you had one post which usually means a new user. You are the first person to respond that was not a new user but had no current posts online to transfer, so your post count ended up being "one". So, welcome back! ;-)>
As I said, I have seen some temp files created with the exe extension which were changed when the download was complete. I have two things you could try to begin with. One is to try a different browser, such as Camino or Firefox. This would determine if the problem is Safari-specific or not. The other thing to try would be to create a new user and see if the problem exists in a clean user account. This would determine if the problem was system-wide or limited to your main user account. Let me know what happens.

Can FireFox 4.0 automatically sort bookmarks (both existing and when new bookmarks get added)?

I know that a user can right click on a list of bookmarks and select Sort By Name. This is a manual process. I am looking for a way for FireFox to do this for me automatically.
2 separate, but related issues.
Is there a way to have FireFox 4.0 automatically sort:
(1) All of my existing bookmarks?
(2) New bookmarks that get added?

Simply because I don't think about using this option that takes more time to close... I always close ALL my windows with the X.
Firefox doesn't hang at exit also...
Using Firefox / Exit doesn't always save the bookmarks also... let's say there is 80% chances it will but not always... I noticed the first time I open firefox after booting the computer... Bookmarks won't be saved... But if I close firefox and re-open it, then it might save it... 50% guess...
I tried the safe mode, but since its closing firefox and re-open it... new saved bookmarks sometimes work, sometimes don't... it's pretty unstable...
Hopefully there is a solution to this problem in a near update, annoying... else I will simply reverse to firefox 3.6.16

Safari gets stuck loading pages and cycles indefinitely

I am new to Macs. I am using Safari to trade stocks and many of the pages I use must be refreshed every few minutes. These pages are located in etrade.com, ameritrade.com, google finance and yahoo finance. At any single point, I may have up to ten or so tabs open in my window and refresh each as I need. However, Safari will have a tough time refreshing the pages most of the time and will get through about half of one, then get stuck and start cycling indefinitely. At that point, I need to stop loading, reload/refresh the page a couple more times, each time Safari getting further along and getting stuck again, until the page properly refreshes completely. I understand that I am using a lot of pages at once. But that should be no problem and should have no affect on the browser and other pages. I have a 2.93 GHz processor, 4 GB RAM, and 256 GB SSD hard drive. The computer has no software on it so far. No music, nothing so far. I've never had this problem with Mozilla or Explorer on PCs. Even this Apple page had to be reloaded, now that the problem has spread to all pages I browse online. I have no other problems with the notebook. Does anyone know what's going on with my browser and do I need a software update or need to get the computer flushed and everything reinstalled? Thanks for any help.

Welcome to the forums!
Try this:
(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl.)
Adding DNS codes to your Network Settings, should gives good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
(An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
This is Apple's guidance on iPv6:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.

Is there any way I can get my play lists back to my iPod itouch as the last time I snyc my itouch it deleted them from my itouch and from my pc

is there any way I can get my play lists back to my iPod itouch as the last time I snyc my itouch it deleted them from my itouch and from my pc

While I can't help you get back Playlists that have been deleted (by iTunes!), I can hopefully help you stop that happening again. The latest version of iTunes (on 4th July 2012) is 10.6.3.25 and this version fixes the bug that has been present (in iTunes) for the last few updates.
So first of all, make sure you have iTunes 10.6.3.25 installed.
For any Playlist you created, you will simply have to compile them again from memory, or by starting again.
For the built-in Playlists that came with iTunes:
Recently Added - see the contribution from Jolly Giant in this post https://discussions.apple.com/thread/3022568.
For other Playlists, tell us which one(s) you're after and we should be able to post instructions here for you.

VALUES NOT GETTING ADDED IN JAVA DICTIONARY

HIII ,
AM DOING AN APPLICATION IN WHICH I AM TRYING TO INSERT VALUES IN A TABLE(CREATED THRU JAVA DICTIONARY), USING EJBS(ENTITY BEAN AND SESSION BEAN) AND COMMAND BEAN..AND WEBDYNPRO....
    AFTER DEPLOYMENT EVRYTHNG IS RUNNING FINE BUT VALUES NOT GETTING ADDED IN THE TABLE...
THE CODE FOR THE "ADD" BUTTON IS :
wdContext.currentEmp_cmdElement().modelObject().add(wdContext.currentEmp_cmdElement().getEmpno(),wdContext.currentEmp_cmdElement().getEmpname());
THE CODE FOR ADD function IN COMMANDBEAN IS
public void add(String empno,String empname){
          try {
                 local.createdata(empno,empname);
               } catch (Exception e) {
                    e.printStackTrace();}
PLZZ DO HELP OUT!!!

The message in simple English just means that "You are doing something really bad" !!! It is absolutely not the communication problem, but understanding problem.
Though you may be executing the same function using SE37 or in the webshop application through JCo, the runtime context is different and without knowing what exactly your Z rfc is doing, it is very difficult to help. To start with, the userid - that is who is running the RFC is different in both situations. In SE37, it is the logon user and in the web, depending upon whether the connection is stateless or stateful, it could be the anonymous ICSS user or the logged in user. Here again, if you have used UME, it is the user id and if you have used ALIAS user, then it is the alias user id. This is just an example. Your runtime context can be different due to many other reasons too.
So, to make this simpler - what is that you are trying to do?
BTW, try not to create multiple threads for the same issue..

Row getting added in the end of the scroll

Hi -
I am using a scroll area on a page on level 1. The issue iam encountering is that when ever i click the plus sign to add a second or third row (assume one record already exists in scroll 1) , the row gets added in the end of the scroll and also the fields are blank. However as delievered the new row should get added on the top of the scroll meaning 1 of 2 not 2 of 2, and also it should carry forward the values from the prior row. Please any suggestion or help is greatly appreciated.

I figured it out. The reason it was happening was because, my scroll record had another key field after EFFDT and EFFSEQ, due to which the delivered copy forward logic for new rows in scroll did not work and the row was getting added in the end or after the first blank row always.

Firewall-safari getting added to list.

Similar Messages

Maybe you are looking for