Firewire 800 card reader with OS 10.6

Can anyone confirm whether the Lexar Firewire 800 card reader will work with OS 10.6.2 etc? I'm told it won't.

Adobe Reader>Preferences>Internet.

Similar Messages

FireWire 800 Card Reader

I just bought 3 Lexar Professional UDMA FireWire® 800 Card Readers. The problem I am having is that they wont work in the 800 port. It cant be the card reader because they are plug and play and not all 3 would be broken. So, either there is a firmware update or something. Please help.
Thanks

Have you tried using the readers individually, using the long fw800 cable, and not the short connecting ones? I have two of them and the short cable(s) caused some transfer problems in which I lost images. Perhaps because they get bent so much, the stress damaged the short cables somehow.

FireWire 800 Cards

Not sure if this is the best forum to be posting this, but I was wondering if anyone out there can recommend a great FireWire 800 card. I would like it to have as many FireWire 800 and USB ports as possible. The last one I tried to purchase was not actually compatible with my particular system. Check out below for my system details.
Power Mac G5
OS X 10.5.8
Model Year - 2003

how about something like [this_|http://www.partsdata.de/Firewire_800_HUB_Repeater_IEEE1394b_8ports_EX-6684__gbIEEE1394-335.html] instead (for FW 800) ?
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Firewire 800 CF-reader faulty after lion upgrade

Hi,
After upgrading to Lion, my primo 2008 iMac will no longer read from my Delock firewire 800 CF-reader. Found a few other notions on mac-forums about firewire issues, some mentioning the kernel running i 64-bit being the course. Tried booting i 32-bit with no luck.
Any suggestions?
Martin

And their swift reply....
Dear Sir Christensen,
thank you for your message.
Our CF card reader is a plug&play device and is automatically recognised by the Mac OS.10.7.
That is only the cases, if her CF- card reader own the current firmware.
A problem with the default driver under Mac OS.10.7 is unknown.
It is none other driver available.
In our test we could not this problem reconstructed.
It is possible, that our CF card reader is incompatibly with her harware.
We have for our older CF card reader (befor december 2011) the following solution.
If you have a Windows XP you can update the new firmware for our CF-card reader in this system via the included tool.
The disadvantage is, the tool is executed only in a Microsoft operating system.
We have tested it and it worked.
Instructions for using the tool "91694FW.exe":
Link for the new firmware.
http://www.delock.de/produkte/G_91694/treiber.html
Please join our CF-card reader with your system .
Insert a CF card in our CF-card reader.
Now extract the software from the annex under the directory "C:".
Click inside the extracted folder on "91694FW.exe".
The tool should now be opened and the directory path for the "JMB355_v0.00.100.11.33.bin" will displayed.
Now click on the "Start" button.
The update is executed and a successful upgrade with the message "PASS" is acknowledged.
Then close the tool and test the CF Card Reader for Mac OS.10.7 with a CF-card.
Note on a possible error during the execution of the update.
If the "START" button after opening the tool can not be activated, is probably the cause the used the CF card.
Try to update with another CF card.
Please note the following information to the "Firmware Update Utiliy MAC v0.1.dmg.rar" !!!
The Mac OS.X based firmware became negative tested from us .
For this reason this firmware is not available over us.
In addition, can not be completely excluded a defect on our hardware.
Please contact in this case, her trader for the regulation of your claims.
Please note the following information about "compatibility with a Mac OS.X":
On all our current card reader ( since December 2011) is the firmware "JMB355_v0.00.100.11.33.BIN" contain.
The current card reader supported a Mac OS.10.5., a Mac OS.10.6 and a Mac OS.10.7.X .
Yours sincerely
Dietmar Burgund
Delock Support

Firewire CF Card Reader Compatible Please Lexar is NOT!

Just bought a $50 Lexar Firewire Compact Flash reader only to find out it is not supported by Tiger or Lexar for Tiger. It would be nice to get a patch from Apple or a driver from Lexar but I'm not holding my breath. Right now I just want to know if there is another firewire CF card reader that will for sure work on my G4 tower running 10.4.5 Thanks!

Alex - I have the same card reader...it works FINE with my 1G Sandisk Ultra II - BUT Tiger will NOT mount a 2G Lexar card in the same reader....I've exchanged the reader twice and still no joy....WHAT IS UP WITH THIS? I can find nothing on any of the Mac forums here or elswhere and can't believe others are not having a problem...??? any ideas...anyone?
G4 Mac OS X (10.4.5)

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

EFilm card reader with a fuji film HD card can't transfer images from iphoto to sd card

I have a MacBook Pro running OSX. I am using an eFilm card reader with an XD picture card. I want to transfer my images from iPhoto on my macbook pro to this XD picture card. iPhoto doesn't recognize the card and photos will not transfer. Help! There was one photo on the card and it successfully transfered from the picture card into iphoto but I can't get it to do the reverse. Thanks so much for the help.

Select the photo(s) in iPhoto and export (file menu ==> export - see this user tip for export options) to a desktop folder and then drag the photos from that folder to the desired location on your XD card
LN

Employee at the Genuis Bar told me to get pci-express firewire 800 card

told me any card would work in my new.......well it WAS new till they announced upgrade, 2x3ghz quadcore xeon.
I want to add another firewire 800 bus since I have the AJAHD hooked to the existing bus.
So I went to Fry's and got the "PCI-express firewire 800/1394b controller card 3 ports".
put it into one of the empty slots, rebooted, and got nothing, just some dull chimes, that don't stop.
it fit within my macpro, but it was a lot shorter than the SATA card, that had no problems.
So I guess I need to know exactly what type of firewire 800 card to I have to get.

I installed 1 of these in an 8 core OS 10.4.11 FCp 6.0.2 QT 7.3.1 dedicated to io HD
don't recall a driver disk for mac, however I rarely if ever use the supplied driver disk for anything anymore 'cause it's almost always out of date. go to mfg site and get drivers etc.
this is the first link I saw googling siig
http://www.smalldog.com/product/42566/atfgc
by the way it worked great. needs a 1 lane slot. you'll need to check expansion slot utility. typically goes in slot above gfx card or slot4 (top) slot

HT5172 My new Macbook Pro doesn't recognize my card reader (with a CF card inserted).

My new Macbook Pro doesn't recognize my USB card reader with a CF card inserted. It works fine on my old Macbook Pro.
Do I need a new card reader? USB 3 perhaps?
I would appreciate any input that you may have. Thank you.

Hi, closereaching. Instead of spending 12 hours reinstalling your operating system and getting everything back up to date again, which probably won't accomplish anything, why not buy a $10 USB card reader for your Casio's SD card? Or (more expensive, but a much more elegant solution), an ExpressCard SD card reader that can stay in your computer all the time?

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

Unable to pair BB Smart Card Reader with Pc/Laptop

Hi, I have 2 new BB smart card readers (SCR) and Im trying to pair with the PC and I can not. The SCR software can not detect the SCR. I put the ID of the device on the software and is trying to looking for it but can not. It says "Unable to connect to the specified Blackberry smart card reader". I have another SCR and I don't have problems to pair with the computer only with the new ones. The SCR have the last OS. Do you know what could be the problem? I think is a bug of the new SCR.

mzamora wrote:
Andy, may be nothing so where can I post it? Is there a general discussion?
Hello,
if I were you, I'd post in the "General Blackberry Smartphone Functions and Features" forum.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

CAC card reader with Snow Leopard

I recently switched to my macbook pro, but cannot use my CAC card reader (smart card) to access email and systems from work. The only info I can find indicates that the readers are not supported/compatible with my system. Other than using bootcamp or parallels and Windows XP, does anyone have any guidance? Any assistance would be welcome. Thanks.

I'm trying to use my CAC reader on my new MBP...old MB had Tiger, so I bought SCM SCR331 reader and downloaded the middleware available for it. Was able to log into AF Portal, but never my email...always errored out and I assumed that for some reason, the reader or the OS or Safari, was not using the correct certificate (there are at least 2 on the ID card...one for regular log in and another for email). At work, the PC asks me which certificate to use when I access my email through the AF Portal and I choose the one marked EMAIL. My MB would not ask...
Now, with my brand new MBP, the SCR331 is just not detected. Reading through the information on militarycac.com, I must need a firmware update that is not available for Mac...your information on the SGT111 is very helpful, and since its fairly cheap, I think I will buy one and be rid of firmware issues.
Accessing my email from home is very important to me, so this last post has me feeling a bit deflated. Please update if you figure anything out, I only have the MB and MBP in my home. I'm also thinking of seeing if the 'genius' at my local Apple store can help...

[Other 865 Series] Medion Card Reader with MSI 865gm3ls board

Hi
Recently got this board to replace a faulty Medion MD5000 board (had a MSI 6701 in). Everything working fine with a Prescott 3.0ghz CPU, but I was wondering if there was a way to connect the Medion's card reader to the board? On the Medion it connects to JUSB1, but on the new Medion board, there is a JUSB1 and JUSB2 and the cable to connect is for 18pins on the Medion. Any ideas guys?
Cheers.

Tough one.... one USB port actually only takes 4 pins = VCC, D-, D+, GND. So you need to figure out what those 18pins are. Any additional LEDs? or anything? So this requires some reverse engineering. Get a multimeter and start reverse engineering! Good luck!

Any recommendations on card reader with thunderbolt

Need card reader for Mac Pro, preferably with thunderbolt connection. Where can I find one??

USB 3.0 SD card reader is good enough reading and writing speed, though...
http://www.amazon.com/Plugable-SuperSpeed-Windows-Certain-Android/dp/B00E2UTU3W
http://www.sonnettech.com/PRODUCT/mediareaders/index.html

SD Card reader with thunderbolt

Hi,
I have a new 11" Macbook Air and I bought a SD Card reader to connect via thunderbolt, but the SD Card reader thunderbolt connection isnt the same as the one on my Air.
Do I need another connector? the card reader is the same thunderbolt connection as on my iphone, which it plugs into but isn't supported!!!
Which connector do I need or should I just go out and get a USB with card reader?
I am going travelling and want to put photos onto my air from an SD card but don't want to be taking loads of different leads along with me.
Any help would be appreciated.

Which SD card reader did you buy? Does it look like this? If so it has a Lightning connector, not a Thunderbolt connector.
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader
Modern iOS devices (e.g., iPhone 5/5c/5s, iPad, and IPad mini) use Lightning connectors.
Modern Macs have Thunderbolt connectors.
The Thunderbolt connector looks like a Mac Mini Display Port connector (and is compatible with such).
http://es.wikipedia.org/wiki/Thunderbolt
USB based SD card readers work fine on Macs.

Firewire 800 card reader with OS 10.6

Similar Messages

Maybe you are looking for