Firewire 800 CF-reader faulty after lion upgrade

Hi,
After upgrading to Lion, my primo 2008 iMac will no longer read from my Delock firewire 800 CF-reader. Found a few other notions on mac-forums about firewire issues, some mentioning the kernel running i 64-bit being the course. Tried booting i 32-bit with no luck.
Any suggestions?
Martin

And their swift reply....
Dear Sir Christensen,
thank you for your message.
Our CF card reader is a plug&play device and is automatically recognised by the Mac OS.10.7.
That is only the cases, if her CF- card reader own the current firmware.
A problem with the default driver under Mac OS.10.7 is unknown.
It is none other driver available.
In our test we could not this problem reconstructed.
It is possible, that our CF card reader is incompatibly with her harware.
We have for our older CF card reader (befor december 2011) the following solution.
If you have a Windows XP you can update the new firmware for our CF-card reader in this system via the included tool.
The disadvantage is, the tool is executed only in a Microsoft operating system.
We have tested it and it worked.
Instructions for using the tool "91694FW.exe":
Link for the new firmware.
http://www.delock.de/produkte/G_91694/treiber.html
Please join our CF-card reader with your system .
Insert a CF card in our CF-card reader.
Now extract the software from the annex under the directory "C:".
Click inside the extracted folder on "91694FW.exe".
The tool should now be opened and the directory path for the "JMB355_v0.00.100.11.33.bin" will displayed.
Now click on the "Start" button.
The update is executed and a successful upgrade with the message "PASS" is acknowledged.
Then close the tool and test the CF Card Reader for Mac OS.10.7 with a CF-card.
Note on a possible error during the execution of the update.
If the "START" button after opening the tool can not be activated, is probably the cause the used the CF card.
Try to update with another CF card.
Please note the following information to the "Firmware Update Utiliy MAC v0.1.dmg.rar" !!!
The Mac OS.X based firmware became negative tested from us .
For this reason this firmware is not available over us.
In addition, can not be completely excluded a defect on our hardware.
Please contact in this case, her trader for the regulation of your claims.
Please note the following information about "compatibility with a Mac OS.X":
On all our current card reader ( since December 2011) is the firmware "JMB355_v0.00.100.11.33.BIN" contain.
The current card reader supported a Mac OS.10.5., a Mac OS.10.6 and a Mac OS.10.7.X .
Yours sincerely
Dietmar Burgund
Delock Support

Similar Messages

After lion upgrade time capsule no longer backs up

Time capsule no longer will back up after lion upgrade is anyone else having this problem?

The Time Machine application is part of the Lion operating system, so you will likely get a faster and more informed response if you post in the Lion support area for Time Machine. There are a number of posts there with issues similar to yours.
Mac OS X v10.7 Lion
Click on the Refine This List button under the Lion and then click on Time Machine to get to the support area.

Preview issue. Send to iPhoto option is grayed out after Lion upgrade

Preview issue. Send to iPhoto option is greyed out after Lion upgrade.
In Snow Leopard it was an option to send pics from Preview to iPhoto, but now it is greyed out if I right-click on the pic. I have searced and tried everything, but I cannot fix it, so does anyone have a fix for it? Please :-)

I can offer no help but would also like to see this issue resolved. Firstly, it would be useful to know if this problem is seen by everyone. When viewing photos in Preview, with thumbnails in the sidebar, right-clicking on any of the thumbnails results in this:
Prior to the upgrade to Lion, "Send to iPhoto" was not greyed out and worked as expected.

Safari Crashes on Opening after Lion upgrade!

I just upgraded to Lion, and I try to open Safari, but it crashes before it loads my homepage!
I had recently set my default browser to Chrome in Snow Leopard the other day pre-upgrade, could that have something to do with it?

I'm using SL and found the perfect solution. 1) Follow oh_okay 's instructions, 2) download and reinstall Lastpass, 3) Restart Safari 5.1 and all should work fine. With this lastest update to Safari Lastpass functions a bit differently, having it's own tool bar with the option to hide. You have to click on the grey star, which stays grey, when logged in. There may be a tweek for that, which I haven't gotten to yet.
oh_okay
Level 1 (0 points)
Re: Safari Crashes on Opening after Lion upgrade!
Jul 20, 2011 10:31 PM (in response to Amgreen)
I've actually just found a solution.
As it turns out, LastPass was causing my crashes, too.
I had to find my SIMBL folder (~Library/Application Support/SIMBL/Plugins/LastPass.bundle) and remove the LastPass plugin.
After that, all was well. Not sure if I need to reinstall LastPass now or just pay for (what I've heard is the far superior) 1Password.

Time Machine lost all backups after Lion upgrade

After Lion upgrade TM asked me to perform a 13 hours backup; I've agreed but now the oldest backup is 3 days ago. What is happened?
Please can somebody help me?
Thanks

I can't help here, but before I upgraded my old G5 (OS 10.5.8) TM popped up a message saying that old files had just been deleted. That was what TM does when its HD is getting full. But this was strange because I knew that I had lots of TM space, and since the last use of the conputer (about 2 hours before) I certainly had not saved to the internal HD several GB of files. To my astonishment, all but the last 4 weeks of files had been deleted, back to Jan 2010! GetInfo said that the space left was about the same as before the incident, whereas it should have shown a huge amount of free space.
I deleted all the remaining backup files and started again. It shook my confidence in TM's ability ot provide a reliable backup system. Now I regard it as a useful source of recovering old versions of files (eg., text, images etc.), rather than as a means to restore the system hard drive. Fortunately, I have been using Carbon Copy Cloner for years to make bootable backups of the whole system HD which can then be used, by simply cloning back to the system HD, to get back to work using the state of the HD when I last cloned. Alternately, the clone on the backup disc can be simply examined in the Finder to recover individual files.

I DVD Soft Frame template issue after Lion upgrade.

Hello, I've just updated my os to Lion but the Soft Frame template in iDVD, (7.1.2) is no longer working correctly. The light coloured background which covers the right hand side of the frame is missing and has been replaced with black. This issue effects sub menus as well. Existiting and new projects using Soft Frame suffer from this problem... Any ideas would be gratefully received! I have tried re installing iDVD but this had no effect.

OK I fixed it, sort of. The .tif file which provides the background image had disappeared. Even deleting IDVD and its themes and re-installing didn't work. So here's what I did:
1) Make a new background. This can be any graduated colour field which you can make on any paint programme such as GIMP. However I grabbed the background from the `Forever' theme which is beige and adjusted the hue to turn it from brown to the blue which was close to the old 'Soft Frame' backing.
Here's how to find the 'Forever' background:
Go to your hard disk and look for Library/Application Support/iDVD/Themes/iDVD7/Forever-Main.theme
CTRL click on it and select `Show Package Contents'
Expand the contents folder and then the resources folder and look for the .tif file marked Forever-Background.tif
Drag this into your photo editing programme and change the colour to what you want.
Save the new file as tpt.tif on your desktop (there is a reason for this filename)
2) Replace the defective backgounds in the `Soft Frame' themes
Go to your hard disk and look for Library/Application Support/iDVD/Themes/iDVD7/Softframe-Chapters.theme
CTRL click on it and select `Show Package Contents'
Expand the contents folder then the resources folder and look for the file marked tpt.tif and delete it
Drag the tpt.tif file you saved to your desktop into the Resources folder
Now do the same thing in Library/Application Support/iDVD/Themes/iDVD7/Softframe-Extras.theme
And do the same thing in Library/Application Support/iDVD/Themes/iDVD7/Softframe-Main.theme
Next time you launch iDVD it will pick up the new backgrounds.
It took me about 10 minutes.
Now I've found where the backgrounds are stored (if you select Project...project info in the iDVD menu the media pane lists the full path) I realise it is easy to put your own backgrounds into any of the existing projects.
I hope this helps.
iDVD background missing after Lion upgrade

Timestamp became incorrect after Lion upgrade

What goes wrong:
It seems the timestamp became incorrect after Lion upgrade.
Timemachine backups are date 26th of Januari 2011, while it is November 3rd.
Same goes for folders, files etc.
System specs:
MacPro 4-core
HDD's: 1TB WD Caviar blacks.
Upgrade of WD installed after LION release.
Any suggestion?

1) Make sure the system Date & Time is correct, and the location/Time Zone is correct
System Preferences > Date & Time
That will probably not be the problem, but you need to make sure there are no issues there.
2) Next, open
System Preferences > Languages and Texts > Format pane ...
and reselect a standard Date and Time FORMAT.

IMac freezes after lion upgrade

Upgraded imac from SL to lion, and now the computer freezes when waking from sleep or switching accounts. I have no issues during the process of using the computer. I have installed new RAM (4gigs), reinstalled the OS, erased the HD (securely) and rebuilt from back-up, pram, disk utilities, disk warrior. Read in one post that this may be the logic board and that Apple may be replacing these in certain modles. I never had the computer freeze when I was running SL, and I am a school IT guy with over 100 macs running SL and this does not happen at school. I have heard from others of the same thing once they go to Lion but the Apple Store says they have not heard of it! Do not see how this could be a hardware thing since it looks to happen after Lion upgrade.
Any ideas

I did do the above as I read that may work too, I also made it so the HD never sleeps. Did not help for me, computer still freezes when switching accounts, not all the time, on average every other day I need to do a hard restart.
Still looking for the answer

After Lion upgrade, MacBookPro has trouble wake from sleep.

After Lion upgrade, my Macbook Pro now sometimes will not wake from sleep. If I close the lid the pulsating light pulsates. Open the lid and the pulsating light goes out and the keyboard backlight activate, screen blank and no keyboard response.

I've been looking for answers, since upgrading to lion, my problem is more of a nusance, when I close the lid on my macbook pro (15" 2.66 i7, 8GB RAM) and it goes into sleep mode, when I reopen the screen the screen backlight comes up momentarily, then goes black (screen image there, just no backlighting) nothing gets it to come out (reclose/open, clicking trackpad, any keys, etc.) except the F1 key. Pushing the F1 "wakes" the backlighting, then I just hit the F2 to brighten it back up, I don't have any further issues until I close it again. Granted not that big of a deal given all the issues everyone else is having with this, but still a nusance I would like to fix. Don't know if this will work for you, but it's been working for me.
I have the same problem with my MBP 17"
Would have been nice if Apple had taken the time to respond.

Anyone have problems getting Office 2004 to run after Lion upgrade?

Anyone have problems getting Office 2004 to run after Lion upgrade?

For the rare few, such as myself, who have some Office 2004 or older documents that fail to translate well in Office 2011, another option is to run Office 2004 in Snow Leopard (with Rosetta) installed in Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions are here:
http://forums.macrumors.com/showthread.php?t=1365439

Garbled Audio After Lion Upgrade

I've scanned the forums, but the only audio bug I can find seems related, but not identical to mine. I just installed OS X Lion on my Mac Pro (2x2.66 GHz Dual-Score Zeon with 4GB Ram). Now all of a suddenly all my audio sounds garbled, almost inverted. Some musical elements are strong, but human voice is indecipherable. This is completely strange.
I've tried messing with preferences, and the Audio MIDI Setup like some others have suggested, but to no avail.
Help!
Sno

I also have popping/clicking in many forms of sound/video after Lion upgrade. iMac 2.66GHz Core 2 duo, 6g ram
Putting the computer to sleep and waking it works for a time, but it eventually returns.
A quicker fix which likely does the same thing is to send a kill -9 signal in Terminal.app to the "coreaudiod" process and force it to restart.
nestor:~ fbhjr$ ps aux | grep coreaudio _coreaudiod 60080 1.0 0.1 2453812 6436 ?? Ss 11:32AM 0:06.78 /usr/sbin/coreaudiod
nestor:~ fbhjr$ sudo kill -9 60080

Firewire 800 card reader with OS 10.6

Can anyone confirm whether the Lexar Firewire 800 card reader will work with OS 10.6.2 etc? I'm told it won't.

Adobe Reader>Preferences>Internet.

TS3938 after lion upgrade, i need to upgrade to Office 2011 or iWork (Pages)..my desktop is from 2007. which should i try?

after lion upgrade, i need to upgrade to Office 2011 or iWork (Pages)..my desktop is from 2007. which should i try?

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

WD My Book Studio FireWire 800 External Hard Drive & Mountain Lion

I just recently purchase a 2 TB WD My Book Studio FireWire 800 External Hard Drive (model #WDBC3G0020HAL-NESN) to perform backups of my 1TB iMac which currently is running OS X Lion 10.7.5. The packaging says the external hard drive is compatible with Lion, but I was curious to find out if I upgrade to Mountain Lion in the near future will that cause issues with the external drive or is it still compatible with Mountain Lion?

That is actually the thread that I was looking at earlier that caused my concern.
Is there any way to 100% verify with apple that there are no firewire problems with external hard drives and Mountain Lion before I hook up my new drive and possibly upgrade in the near future.
Also, I have heard good things about both SuperDuper and Carbon Copy Cloner.
I basically want to be able to boot from my external hard drive partition if I have a major hard drive issue.
Will both of those programs do that for me and will I really go wrong with either one of them?
Thanks again for you repsonses, they have been a big help!

No preview displayed in Aperture and Preview after Lion "upgrade"

Hi everyone,
something (well, maybe many things) has been blown by Lion...I'm only just trying to figure out what exactly is.
Generally the system performs well but I have a big issue with previews within Aperture 3 and in Preview/Quicklook itself.
I'm testing Lion onto a late 2009 unibody macbookpro 13", 2.0 ghz, 8gb Ram; Aperture library is managed, around 100gb, all files are from Canon 30D and 350D, plus some jpegs and videos from a Powershot A620 (I didn't test the videos imported in Aperture yet, in SnowLeopard everything was fine).
In Aperture 3 (I have upgraded to 3.1.3 before installing Lion) my Canon 30D files are displayed correctly both in browser and viewer...Canon 350D files (raw images) aren't...well, the small thumbnail in the browser view is looking fine but when I double click to display the large image..it suddenly disappear! gray or black background, no image at all...back to browser view and the small thumbnail correctly display the image.
So i tried to regenerate the preview...nothing, same behaviour...if I press P for quick preview nothing is displayed, I get nothing even if I press M for master image.
Ok, I said...let's try this...I decide to export a photo, as master, onto the desktop...fine, the image icon is good, correctly displaying the image thumbnail...if I select it and press the spacebar i obtain ...absolutely nothing,a gray window that should be my image.
This happens also for the 30D files when I export them ...within Aperture they're good.
I also tried to export a version (jpeg)...all I obtain is a totally black jpeg.
Seems that Preview is not working anymore or uncapable to display any raw format, only jpegs are correctly displayed, I mean original jpeg shot.
I went through all the basic library maintenance for Aperture, repaired system permission before and after Lion installation...nothing changes.
Anyone experiencing a similar behaviour under Lion? Is Preview not working only in my system? Any suggestion?
I'm trying to find something to fix this...I have Time machine backups, Aperture vault backups so reverting back to SL is only a matter of patience and time...but I would like to stick with Lion and keep testing.
Any help or suggestion will be appreciated...I'm also searching for similiar behaviour (mostly for the problem with Preview) in the Lion OSX forum, this is heavily affecting Aperture.
Best regards,
Alberto

I found a solution that worked for me. Seems like my firewall did not accept the afp connection permissions anymore after installing lion... Since everything worked well turning off the firewall.
So if you don't want to keep your firewall disactivated here is what worked for me:
- Leave your firewall activated.
- Turn OFF afp file sharing in the sistem prefs
- Restart your Machine
- Turn ON afp file sharing
- You should now get a message if you want to accept afp connections...
- click YES
Thats it... Everything fine on my network now.

Firewire 800 CF-reader faulty after lion upgrade

Similar Messages

Maybe you are looking for