Firewire 800 extension cable?

Hi, I am looking for a firewire 800 extension cable to use for when I switch my external hard drive between my mini and laptop. The mini is up and out of the way and would be easier if the extended from the computer instead of reaching to the back of the computer. I looked on the apple store and search the internet and did not find one yet. I know they have them for USB because I have one, so I was hoping there was one somewhere for FW800. Has anyone seen some place selling them?

Nameless68 wrote:
That hub could work for some thing else, do you have a link for that?
well, i got that from a German site: http://www.partsdata.de/Firewire--Firewirerepeater_HUBs_switches_panels--Firewire_800_HUBs__gbshop2201.html.
they do ship within Europe ...
JGG

Similar Messages

  • Sony Cam iLink to MacbookPro Firewire 800 what cable?

    I have a Sony Handcam which has an iLink DV output and I know it will feed into my Macbook Pro Unibody Firewire 800 port for iMovie'09 but what iLink cable do I need as there are different pins 4-4 6-4 etc?
    Looking at the ports they look the same size so I think I need an iLink cable 4-4 am i right?

    One of these:
    http://www.amazon.co.uk/IEEE1394-FireWire-Digital-Camcorders-Cameras/dp/B002S4OH OG/ref=sr11?ie=UTF8&s=electronics&qid=1255798907&sr=8-1
    Phil

  • HT4124 Macbook Pro 10.6.8 Imovie will not recognize Sony Handycam DCR-HC38 via Firewire 800-9pin cable. Is it not compatible? It worked with previous Macbook (black) with prev. firewire version.

    Have tried to connect Sony Handycam DCR-HC38 to Macbook Pro via Firewire 800-9pin to 4-pin cable. I Movie will not recognize camera. I have transferred media on old Macbook (black version) with different firewire. Does the new IMovie not support this product?
    Thanks

    Hi,
    Did you solved this problem?
    I have the same situation here...
    Regards

  • FireWire 800 Cable

    Hello,
    I just went to capture some dv tape from my camera to FCE using my Firewire 400 cable that I used with my core duo, but it looks like I need a special FireWire800 cable to work with my newer 27 inch Core i7. Is that the case?
    If so, would any of the following cables work, or does anyone suggest something else?
    Thanks.
    -- http://www.newegg.com/Product/Product.aspx?Item=N82E16812270193
    -- http://www.amazon.com/Tripp-Lite-F019-006-Firewire-Hi-speed/dp/B000AAZQM2
    -- http://www.amazon.com/RiteAV-Firewire-4-pin-9-pin-Cable/dp/B000VJJ1EQ
    -- http://www.amazon.com/Hosa-Firewire-800-Computer-Cable/dp/B000VB9BVW

    I have been using 9->4 pin firewire cables from monoprice.com with my FW800 iMac. Works perfectly.

  • Recording to external hard drives - Firewire 800 problems

    Ok so i did post a similar thread on this in the "mac mini" part of the website so im very sorry for double posting but I thought since this problems pertains mostly to recording and specifically recording on garageband, that I would try posting here as well. Heres my deal:
    I am a musician working with garageband and I have always been recording to my internal drive until recently. I was unaware until I read some posts here from the good people like you guys, that that is not a good idea to record to your internal drive. So, I got an external firewire 800 drive (http://www.amazon.com/gp/product/B001DGZ05A) and this cable (http://www.amazon.com/2M-Firewire-800-9PIN-Cable/dp/B000XQILWK/ref=pdbxgy_e_imgb). When I received it, I first used disk utility and reformatted it for Mac OS Extended Journaled. Then I proceeded to move a couple sample libraries and my entire "Garageband" folder (with my saved songs in it) to the external. I instantly knew something was wrong. The files were taking forever to get written over. It took about 15 mins for a 5GB folder to be moved over. I was already discouraged. Anyway, I plugged in the USB cable that came with the external (the drive has hook ups for both USB 2 and firewire 400/800) and tried moving the same files and it was MUCH faster. The same 5GB file was moved over in a matter of minutes.
    I then tried recording to the drive (using firewire again) and it would hardly even PLAY the song without stopping every couple seconds (too many effects error, and yes ALL the tracks were locked). Tried to record as well and i'd get even less time before garageband would stop the song with the same error. So I disconnected firewire and went USB. Thru USB the song didnt stop once, not on playback OR recording. Then I moved the songs back to my internal and played them (and recorded) with no problem either.
    I ran a couple tests on the drive using AJA system test and came back with these results:
    Basic test of read/write speed using firewire 800:
    write - 14/mb sec
    read - 21/mb sec
    then, using usb 2.0
    write - 18/mb sec
    read - 37/mb sec
    both these connections seemed to be running slower then they should ..but at least the USB connection would actually let me play a song and record to it without stopping
    I manually copied over a 2.04GB file and via firewire 800 connection it took 2 mins and 20 secs. Via the USB 2 connection it was 55 seconds! ..also, while i transfered the files i noticed that the USB transfer was nice and steady with tiny increments of the file being transferred. Firewire, however, was speedy then slow, speedy then slow. Very inconsistant transfer speed throughout the process. kind of choppy
    So what gives? I cant figure out if I'm doing something wrong, or if my external HD is bad? Or the cable is bad? Or maybe the firewire port on my mac mini is bad (i've never used it before for anything other than this external drive). Or i'm thinking maybe my processor isnt strong/fast enough to record to the external firewire drive? Im working with a mac mini 120GB internal HD and the 2ghz intel core 2 duo with only 2GB ram (i know thats not ideal for recording and im planning to upgrade at some point, but i have been recording to the internal just fine with the RAM i have now and never had a problem until trying to record to the firewire drive). I was going to go out today and get a new cable and see if that was the cause of it. Anyway sorry for the book-length post! But PLEASE SOMEBODY help me here! ..as i said, im not very computer literate and only just started producing music using computers so please use dummy terms lol ..thanks in advance

    Strictly my opinion, and more than happy to be educated with facts and convinced otherwise... but, there are no dangers.
    Bottom line is this... does your specific computer setup encounter ANY problems during recording or editing with your chosen software and current workflow? If not, then there is nothing wrong. Simple as that. Further, if you are having problems, then its more than likely dealt with by upgrading RAM amount and internal HDD speed and size. If you have a slightly older machine that is pre FW800, you will find by bench marking your HDD's that an upgraded internal system HDD will significantly outperform any external HDD read/write spec's. Even with FW800, comparing apples with apples, your system HDD will more than likely have better spec's. Please however, do not take my word for this, but try it out for yourself. Make sure you have facts about your own system rather than believing my claims or anyone else's claims. I used Intech's Quickbench http://www.speedtools.com/QuickBench.html to get some facts about my machine.
    There will be an argument made that you will be putting strain on your hard drive by recording to the system drive because it not only has to deal with this function but also with other functions related to your audio programs and OS. Apparently you may be working it on the 'hard' side and shorten its life span. Probably technically correct but practically speaking you will more than likely never even notice any such strain. If you are worried about a system HDD crash or death because you are working it too hard then the answer to this is a well planned back up regime. You should have one anyway, regardless of setup.

  • Firewire 800 not running as expected.  VERY slow

    Ok so this is my first post here. I looked all over google and various places but cannot find out whats going on (im also not very computer literate so please bear with me!). Heres my deal:
    I am a musician working with garageband and I have always been recording to my internal drive until recently. I was unaware until I read some posts here from the good people like you guys, that that is not a good idea to record to your internal drive. So, I got an external firewire 800 drive (http://www.amazon.com/gp/product/B001DGZ05A) and this cable (http://www.amazon.com/2M-Firewire-800-9PIN-Cable/dp/B000XQILWK/ref=pdbxgy_e_imgb). When I received it, I first used disk utility and reformatted it for Mac OS Extended Journaled. Then I proceeded to move a couple sample libraries and my entire "Garageband" folder (with my saved songs in it) to the external. I instantly knew something was wrong. The files were taking forever to get written over. It took about 15 mins for a 5GB folder to be moved over. I was already discouraged. Anyway, I plugged in the USB cable that came with the external and tried moving the same files and it was MUCH faster. The same 5GB file was moved over in a matter of minutes.
    I then tried recording to the drive (using firewire again) and it would hardly even PLAY the song without stopping every couple seconds (too many effects error, and yes ALL the tracks were locked). Tried to record as well and i'd get even less time before garageband would stop the song with the same error. So I disconnected firewire and went USB. Thru USB the song didnt stop once, not on playback OR recording. Then I moved the songs back to my internal and played them (and recorded) with no problem either. So what gives? I cant figure out if I'm doing something wrong, or if my external HD is bad? Or the cable is bad? Or maybe the firewire port on my mac mini is bad (i've never used it before for anything other than this external drive). Or i'm thinking maybe my processor isnt strong/fast enough to record to the external firewire drive? Im working with a mac mini 120GB internal HD and the 2ghz intel core 2 duo with only 2GB ram (i know thats not ideal for recording and im planning to upgrade at some point, but i have been recording to the internal just fine with the RAM i have now and never had a problem until trying to record to the firewire drive). I was going to go out today and get a new cable and see if that was the cause of it. Anyway sorry for the book-length post! But PLEASE SOMEBODY help me here! ..as i said, im not very computer literate and only just started producing music using computers so please use dummy terms lol ..thanks in advance
    P.S. this is my first post so im sorry if I should've posted this in a different category.

    Hi,
    Are you using an audio Firewire 400 interface (daisy-chained through you external FW800 HDD) ?
    I've same problem (mac mini June 2010) so I think it is a compatibility problem between the mac (perhaps only with mini) and some recent Firewire chipsets found in external HDD. I read somewhere that Apple does not support anymore PLX (that acquired Oxford) chipsets for external HDD connected to Mac Pro.
    I tried then using the Sonnet Yin Yang adapter (to avoid daisy-chaining), however it is the same :
    http://discussions.apple.com/thread.jspa?messageID=13360117#13360117
    The problem does not happen when daisy-chaining through FW400 (from the audio interface to the HDD).
    Using the external disk only (FW800), I get up to 60 Mbyte/s sequential write and up to 70 Mbyte/s sequential read (that is using xbench - in memory read, you shouldn't try between two disks as the slower will be the limiting factor). My external HDD is a WD Caviar blue so it also helps.

  • Can you connect Firewire 400 to Firewire 800?

    Have had a Powerbook Titanium G4 and just got a new MacBook Pro. The TiBook has an 800FW port, the TiBook only a 400FW port. Can I connect the two directly? Is there a 400 to 800 adapter cable? I'd like to transfer files fast between the machines.
    Currently I transfer files through an external hard drive that has both 400 and 800 ports. But it sure would be easier if I could get the TiBook to run in FW target disc mode with the MacPro. Any other suggestions for linking the machines?

    Hi
    There's a couple of ways to do it:
    One solution is to get an Expresscard (e.g. Belkin Firewire 400 which gives you an extra two ports). I bought one of these and then went and misplaced it!
    Rather than buy another Expresscard, I bought a Firewire 800/400 cable (cheapo/no name, I'm afraid) from a small computer shop - it was a quarter of the price of the Belkin and works fine. I also got a small adaptor plug so I that I can connect connect my camcorder.
    Of course, I found the ExpressCard a couple of days ago...
    You could connect the computers by an Ethernet cable, too.
    Hope that helps.
    OBG

  • Firewire 800 problem? cant see my Panasonic camcorder on Final Cut Express

    Hi
    I have a new IMAC 27 in, intel dual processor (which I love) and its running the lastest version of snow leopard. I got it for video editing (dec 09) and I'm fairly new to macs and the firewire 800.
    I have a panasonic 3ccd camera nNV-GS500 and after finally figuring it out I got a new cable - a brand new firewire 800/400 cable. However nothing can be seen when I start up Final Cut pro express or imovie.
    I have tried turning off mac, unplugging it, then turning on camera before turning on imac.
    Looking at some of the threads it seems there are some issues for seeing camcorders with firewire 800 and that a firmware? (is this a download for hardware update) is an update is due - can anyone confirm what i should do.
    thanks in advance

    Cathy, welcome to the Discussions group.
    Here is the list of camcorders supported by iMovie and Final Cut Express. Your camera is not in the lists but may still work.
    http://support.apple.com/kb/HT3290
    http://support.apple.com/kb/HT2948
    When you are using the camera are you running it from its battery power or is it plugged into its own power source (same question would apply to your external drive which may have a problem if its not using its own power supply depending upon how much power it would draw from the computer and how much power it needs to be reliable). You should be running the camera from its own power supply.
    When you are having a problem, isolate the sources of potential conflict. Make sure no other devices are plugged into the computer. That means you'll be transferring your video to your internal disk. You can always copy or move it later to an external disk if that's where you want to store it permanently.
    Follow the instructions in your camera manual carefully and we hope that works. If it doesn't work, then be creative. If the manual says to start the camera first in PLAY mode, start it in RECORD mode but then switch to PLAY mode to jumpstart FCE or iMovie to recognize there's a camera installed. That hint was provided in another thread on this topic and worked for that person. You can vary starting the camera before FCE or iMovie and then try starting FCE or iMovie first followed by the camera. Just a few variations and hope again one works.
    All variations fail, and the vendors web site indicates it should work, then maybe your Firewire port on the computer has a problem. Look in "About This Mac" to see the status of the Firewire service with different devices plugged in. It's not a common problem but can happen.

  • Firewire 400 vs Firewire 800

    I believe the new imac has both a FW 400 and FW 800 port. I don't know too much about FW -- can I plug a FW 400 device into either port, or do I have to use a device specific to the port (e.g. 400 with 400, 800 with 800)?

    [High Speed FireWire 800 Short 9" |http://www.usbfirewire.com/Parts/rr-cfb-9902-09.html]
    [High Speed FireWire 800 Short Cable 13" angle |http://www.usbfirewire.com/Parts/rr-99r01-13.html]
    Thanks, Dennis -- exactly what I was lookin' for.
    Looby

  • Print to Video does not work with Firewire 800 to 400 cable

    I need to print video from a Mac Pro with only Firewire 800 port to a Sony DSR 50 with only Firewire 400 port. I'm using a Firewire 800 to 400 cable and I also tried a 400 cable with a 400 to 800 adapter attached. I'm able to control the Sony deck but I cannot get any audio/video to it.
    Anyone else have this problem?

    When you've got the deck connected and in fcp you go to  view:  videoplayback, do you see the appropriate apple firewire option available and chosen?  And if you hit command-F12 (show all frames) do you see anything?  If it doesn't work, try restarting the computer with the deck remaining on.

  • My new MacBook Pro and Imac can't recognize my digital video camera (Canon GL2) via FireWire 800 9 pin to 4 pin cable.

    My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables.  Any suggestions?  Thanks.

    Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.

  • I am using IMovie 11 with a new iMac.  Unable to import video from a Panasonic PV-GS400 mini-DV camcorder using a Firewire IEEE 1394 400 cable connected to a Firewire 400 to 800 adapter which is then connected to a Thunderbolt to Firewire 800 adapter.

    How can I get iMovie to recognize my Panasonic PV-GS400 as a device so I can import video to my iMac?  I have a FireWire IEEE 1394 400 cable connected to the camcorder.  Since my new iMac has only Thunderbolt ports, I purchased a Firewire 400 to 800 adapter to connect to the cable.  I also purchased a FireWire 800 to Thunderbolt adapter to connect to the computer.  My camcarder is still not recognized.

    I would suggest that you try a 9 pin to 4 pin Firewire Cable along with the Firewire to Thunderbolt adapter.
    Those Firewire 400 to 800 adapters do not seem to work well with iMovie.
    The 9 pin to 4 pin cables are available at reasonable prices here, for example.
    http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

  • How do I connect my 2nd generation Ipod to a Firewire 800 port? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered...

    How do I connect my 2nd generation Ipod to a Firewire 800 port on a new laptop? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered and connected simultaneously. Pls help.

    Try here:
    iOS: Not responding or does not turn on
    If not successful then time for an appointment at the Genius Bar of an Apple store.

  • I have a Firewire 800 external hard drive and need to connect to my new MacBook Air.  Where can I get the correct cable?

    I have a Firewire 800 external hard drive and need to connect to my new MacBook Air.  Where can I get the correct cable?

    Apple has announced a Thunderbolt to Firewire adapter, but not yet given a release date.

  • I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
    Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
    On your new MacBook Pro open "Migration Assistant" in your utilities folder.
    Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

Maybe you are looking for