Firewire and DVSD
hi,
i can't get my dv camera to work with the jmf. the dv camera is connected via firewire to the pc. jmfstudio correctly identifies an AVI formatted video with DVSD encoding, but it can't capture the video source. apparently the DVSD encoding is not supported.
do you know where i can get the DVSD codec from? if not, do you know who might be able to help me (is there something like a java technical support where you can talk to ppl?).
this is really urgent, so i would be gracious for hints.
many thx in advance.
sorry, i don't have an answer, but i'd like to second the request. i am trying to capture video with a canon dv camera through a creative audigy card's 1394 input (win2k). This setup captures fine in other software (premiere) and when detected by jmfregistry.exe appears as:
vfw:Microsoft WDM Image Capture (Win32):0
with Capture Device Details:
Name = vfw:Microsoft WDM Image Capture (Win32):0
Locator = vfw://0
Output Formats---->
0. com.sun.media.format.AviVideoFormat
DVSD, 720x480, Length=120000 0 extra bytes
However, trying to capture video in JMStudio gives the error:
Controller Error:
Failed to realize: input media not supported: dvsd video
Can someone please explain what the problem is and how it can be fixed?
thanks
nk
Similar Messages
-
How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.
You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.
-
How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!
Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.
-
Cardbus slot (And therefore firewire and SD card??) performance very slow after Windows 8.1 update.
Hi All,
Just updated to Windows 8.1 64 bit from Windows 8. The Cardbus slot speed/bandwidth has dropped considerably to the point that it is now unusable since the update. It worked fine before, although I had a similar problem in the past which was cured by a BIOS update. Since the RICOH chip that controls this slot also control the Firewire and the SD Slot, I was wondering whether these are also affected?
Does anyone else have the same issue? I expect it affects all computer with this chip: T61/X61/R61 etc etc.
Would someone who is on Windows 7 64 bit or Windows 8.0 64 bit mind sending me the pci.sys and pcmcia.sys files so that I can try rolling the drivers back to a previous version?
System details:
Thinkpad X61 Tablet
Core 2 Duo 1.6
8GB RAM
128GB SSD
Windows 8.1
Many thanks.
ShaunHi @PriyanshuJ ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP -
We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?
Zap the PRAM and Reset the SMC, then try again.
-
Can i back up one G5 via firewire and another via USB to the same drive
I have an ibook and a G5., I have a 500 gb lacie external drive.
Can i back up both via time machine simultaneously, one via firewire and one via USB?Ross Dehovitz1 wrote:
I have an ibook and a G5., I have a 500 gb lacie external drive.
Can i back up both via time machine simultaneously, one via firewire and one via USB?
No, you can not directly attach one drive to two computers at the same time, period. In particular, you can't use it for Time machine this way. -
RGB, Composite, Firewire and S-video capture device for FCP
Hi,
I was just wondering if anyone could suggest some of the better capture cards that support RGB composite, firewire and s-video inputs that will work with FCP.
The set up is on Mac Pro and the device needs to be as reliable and noise free as possible as it will be used for the capturing of video for evidence in court cases.
Any help is this area would be very grateful,
Regards,
Martin.Hello,
I have no experience with the AJA product line but I know that many of the folks here have used them. They make a good line of cards that will do what you are asking for. They don't have firewire on the cards, but the computer you are using should have one I would assume.
Since you said 'S-Video' my thoughts are that you are only using SD? If that is going to be the case for a long time then look at this card:
http://www.aja.com/products/kona/kona-lse-ls.php
It has composite and S-Video inputs. IF there is the chance that you are going to be doing HD and IF it is still tape based, then look at one of the higher models. But again, that is if you are going to be upgrading to HD sometime soon.
Hope this helps.
-Jay -
My question: Is it possible to get iMovie version 9.09/2009 MacBook Pro/ Mac Os X version 10.7.5 to recognize JVC GR-DX77U camcorder via 9 pin to 4 pin firewire and import video?
My camcorder is recognized with 4 pin to 4 pin firewire on laptop with Windows operating system; however, it will not recognize on MacBook Pro with 9pin to 4 pin firewire. JVC website does not offer any updated camcorder driver software for this camcorder and older version driver on CD will not download onto MacBook Pro.Hi
With the reservation of that I us:
• iMovie 9.0.4
• Mac OS X.6.9
see my notes
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W -
how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though
A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.
-
What camcorder would you recommend to buy that has the firewire and ability
to upload directly to imovie? I have a JVC MG20 which is great but gave me all sorts of complications in adjusting/changing settings etc just to get it into imovie. Im now intending on buying a new one in the next few months which will make my life simpler and i would like peoples opinions and recommendations. The JVC i have now is a hard drive style which i like, dont want to mess around with dvd discs in the camcorder, much rather do my editing on the mac and make a dvd from that.
Thanks for any advice given...Really any Sony or Canon that has firewire and DV Tape...do not get a DVD nor a Hard drive camera, though. They are NOT compatible with iMovie at this time.
:)Sue -
IP over Firewire AND Ethernet connected cluster?
Does anyone have any experience with IP over Firewire and Qmaster? What I'm trying to do (for now) is to have a file server connected to a bunch of Firewire HD's, then that connected to two other macs via IP over Firewire, and all that be a cluster.
The file server is the controller. Or I want it to be at least. Connected to this cluster are two workstations, connected to the file server via Ethernet.
So it's File Server with several external Firewire HD's connected to it with the video data. Connected to this file server are two macs via IP over Firewire which will be services only nodes. Connected to ALL of this over ethernet are two editing workstations. Qadmin can't seem to see the two mac nodes connected via IP over Firewire.
The problem is that Qadminstrator can't see the two macs connected to the file server via IP over Firewire. I'm wondering if for some reason data can't go from Ethernet to IP over Firewire and back again.
Any tips or suggestions? I'm just about out of ideas for now.I was also NOT ABLE to use both nodes connected in a MIX of ETHERNET and FIREWIREover IP.
I WAS able to get a 4 x NODE cluster working using SHAKE & COMPRESSOR/QMASTER using all GbE EThernet - I went out and bought a cheap 8 x PORT ethernet GbE hub and all my problems went away.
HEre's what I had initially and what I did and it DIDN'T work consistently..:
Hardware Initially:
• g5 QUAD and 2 x MBP Dual Core 15's + 1 x MBPDC 17inch.
• G5 QUAD GBE1 connected to #1 x MBPDC 15 on its EN0 with cable
• G5 QUAD GBE2 connected to #2 x MBPDC 15 on its EN0 with cable
• G5 QUAD FW0 connected to 1 x MBPDC 17 on its FW1 with 6 pin FW cable
• G5 QUAD is set as CONTROLLER+SERVICES
• MBPDC's are all SERVICES ONLY.
• thus 3 x SUBNETS
SETUP#1- problem symptoms
• via QMASTERADMIN - G5 CONTROLLER could see MBPDC 17 and ONE of the MBP15;s but not all of them.
•tries various configs on each FW and EN0 for boths FW and EN paths.. never consistent view..
• removed some FW disks from FW400 path that were attached to CONTROLLER G5 host ... could then see ALL as a MIX of THERNET and FW. (Same happens using FW800 - although avoided this because of sperious DISK issues wth external FW800 disks on G5 QUAD).
• created cluster (not a quick cluster)- sent simple long I-FRAME based DV-PAL to smaller DVPAL) codec test to compressor and set the CLUSTER to the QMASTER on I defined.
• set QMASTER controller sys pref to use ALL NETWORK PATHS and disbaled the AIRPORT subnets on each MACHINE)
• PROBLEM was only G5(controller+services) and TWO of the services nodes (MBPDC's) were processing - NEVER all three! It didn't seem to matter what IP path was onnected (EN or FW).
• - all the above was a NO go waster of time. (aggh)
so..
HARDWARE SET UP #2 and what worked first time!
• purchased 1 x GBE Ethernet hub (8xport) w/P/supply and four 1m ethernet cables
• g5 QUAD and 2 x MBP Dual Core 15's + 1 x MBPDC 17inch.
• G5 QUAD GBE1 connected to GBE HUB
• #1 x MBPDC 15 on its EN0 with cable to GBE HUB
• #2 x MBPDC 15 on its EN0 with cable to GBE HUB
• #1 x MBPDC 17 on its EN0 with cable to GBE HUB
• G5 QUAD is set as CONTROLLER+SERVICES
• MBPDC's are all SERVICES ONLY.
• thus 1 x SUBNET....!
WORKS EVERY TIME First time
• all machines work to render or transcode.
• for SHAKE RENDERING, each CPU has a process.. so there seems to be as many as (4 x 1)+2 + 2 + 2 rendering processes at any one time.
• less for COMPRESSOR as one per HOST (4 in my case)
Also.. in QMASTERADMIN - always:
• have the SOURCE and TAGET disk volumes|directories ou need MOUNTED (NFS works for me) and
• set to NEVER COPY.
• set QMASTER sys prefs/Advanced/"USe NEtwork Interface = EN0 (or whatever one you want to use. 'd imagine that a FW hub would also do the job (IPoFW).... but for me I had all free ETHERNETs NICS so I used them.
• oh .. enable all your airports NICS.. .. in the above QMASTER wont use this subnet.
This speeds the WORKFLOW up enormously because the source material does not have to be COPIED to each host (well I think that what it means).
So the solution in my case was to have ALL the HOSTS on a SINGLE subnet..
works for me.
hope that helps
W -
I have 10.5.8 macbook with firewire and want to connect to my sony camcorder 2005 iLink. I believe they are both 4 pin and need male connecters. Can anyone help me?
Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Firewire from the left hand column of the System Profiler. If it says "Maximum Speed: Up to 400 Mb/sec" then this is the cable you need http://www.amazon.com/Cmple-IEEE-1394-FireWire-iLink-Cable/dp/B00403TH0C/ref=sr_ 1_8?s=electronics&ie=UTF8&qid=1311376173&sr=1-8
If it says "Maximum Speed: Up to 800 Mb/sec" then post that back here. -
I have a PPC G-4 and am shopping for my first camcorder. The computer indicates a "FireWire Bus: Maximum Speed: Up to 400 Mb/sec". Does that mean that I am already set up for a camcorder or does that mean that I must install a FireWire adapter card to make it FireWire/IEEE 1394 compatible?
Silver G-4 Desktop Mac OS X (10.4.5)you might posting in another thread in the PowerMac G4 forums as "Firewire and Camcorders" is not normally discused in this thread for "DVDs and CDs on your PowerMac G4 (MDD) and (FW800)"
by Silver G4 do you have a MDD or QS model? both have built in ports for Firewire.
you should have no problem using a firewire cable from your DVcam to your Mac.
most DV cams will work. If you get a Sony, they often refer to Firewire as iLink (IEEE 1394 is the tech spec for Firewire).
iMovie will likely be the only app you will need to link to your DV cam and you can import every clip into it for direct manipulation.
Message was edited by: lz3broc -
Camcorders that are compatible w/ BOTH MacBook (no firewire) AND iMovie09?
I just bought a new MacBook and was surprised to discover it has no firewire port. SO I cannot use my digital video camcorder (tape based) with it at all. Rather than upgrade to a Mac Book Pro with firewire, I am instead considering just getting a new camcorder. I have heard of all kinds of compatability problems with USB camcorders. Anyone know of a camcorder that most definitely works with both MacBook (no firewire) and iMovie 09?
I would use iMovie 06 with iDVD 09.
iMovie 08/09 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
USB camcorders use formats that use high compression to store the video files thereby lowering quality. This may be good enough to give you "decent footage" if so, then you won't have a problem using a USB camcorder. However I have never been happy with the quality that a USB camcorder provides (they always look grainy to me).
A Firewire miniDV tape cam will give you lossless quality video and is best for any editing purposes (iMovie, Final Cut etc.). So without Firewire make sure you get a chance to try out any USB camcorder before you buy.
I would never edit video without FireWire. -
IP over Firewire and ethernet at the same time?
Is it possible to use both IP over Firewire and ethernet at the same time?
I want to use my TB hard drive attached to one Mac via Firewire 800 to backup another Mac also attached to the same drive via Firewire 800. I can only mount the drive on one machine at a time so I need to share it out to the other Mac. It works great if I set it up to do strait IP over Firewire, with static IPs, but that means I can't connect to the internet because my ethernet connection on both machines becomes the secondary connection method. Similarly, if ethernet is primary then I can't connect via Firewire. Is there a way to set it up so the Macs will know which method to use depending on the IP address?
I am using 10.5.1 on both machines.
G5, 1.8 GHz, 15.GB RAM
MBP, 2.4 GHz, 4GB RAM
Thanks!Certainly.
In the network control panel I set Built-in FireWire to the top of the service order list, followed by Built-in Ethernet.
Next, I set Built-in FireWire to Configure Manually with the address 192.168.1.xxx and the Subnet Mask to 255.255.255.xxx, making sure the Subnet Mask is set the same on both machines and that the IP address is different on both machines and different from the Built-in Ethernet addresses.
I applied the settings, turned on Sharing on both machines, then mounted whatever shared drives I needed by connecting to the other machine using the FireWire IP address.
Now I am able to share drives using FireWire 800 - which works great when used with Time Machine - and still use my normal ethernet to surf, etc..
Maybe you are looking for
-
When I open compose and type the first letter of the recipients address in the To: bar a dropdown appears with a listing of the email addresses I have sent messages to in the past as well as addresses of my contacts list. How do I delete an address f
-
Oracle 9.2.0.1.0 setup problem
I install oracle 9.2.0.1.0 on windows XP professional but i have some problem.By the way Oracle 9.2.0.1.0 is the first program of on my PC.(means everything is default value.) Firstly,i setup name OraHome92 and c:\oracle\ora92 and select Oracle Datab
-
Hard Drive Dead. How do I upload songs from Ipod to new hard drive?
The hard drive on my computer crashed, and I had to buy a new one. Unfortunately, I did not have the old drive backed up and lost all my data, including my Itunes library - $90 or so in purchased ITune songs plus a tonn of songs from my CD collection
-
I installed the latest version but it won'trun videos. I get a msg that upgrade is needed.
-
Calling Java Getter from JSTL Confusion
In a lot of website tutorials and code examples I have found, I see code that goes something like this public class SomeBean { private int[] values; public SomeBean() {} public void setValues(int[] v) { values = v; public int[] getValues(