Firewire and external drive

I bought an additional hard drive. I daisy chained it to existing external hard drive which is connect to my mac via firewire. My mac now doesn't see either drive. If I plug original external to USB my mac finds. How can I get my mac to find my external drive again via firewire? Thanks.

If your FireWire drive is one that has USB and FireWire interfaces, you can't connect another drive on a different type of bus than the one used to connect to the host computer. If I'm reading what you're saying, it sounds like the new drive is USB and you're trying to daisy-chain that with the FW drive. Not going to work.
-Douggo

Similar Messages

Firewire Hubs For Use With A New Firewire 800 External Drive

I currently have 3 HD daisy chained to one of my Firewire ports. I have an older Firewire iPOD with a dock that is attached to the other Firewire Port.
I need more storage capacity so I am planning to get 1 Tetra La Cie - this model. I have had excellent experiences with LaCie.
(LaCie 301442U d2 Quadra Hard Disk 1TB eSATA/FireWire800/FireWire400/USB 2.0 External Hard Drive (Aluminum).
I would be using the new HD as a Time Machine Device and possibly as backup for my music library which is currently on one of the external HD's and backed up to a second HD.
I don't have available ports.
Are there Firewire Ports which would be functional?
Should I be considering some other sort of configuration?
This is an iMAC 24" bought in October 2006
Thanks

My music library is housed on an external hard drive so Time Machine can't be used since it requires an operating system on the source files...
That's not true. You can back up files and folders on an external drive using Time Machine, as long as they are not on the same volume as the Time Machine archive. You just go to System Preferences +Time Machine+ pane. Click on the Options button. All external drives are on the +Do not back up+ list by default. Remove the external drive (with your iTunes files) from this list of things excluded from backup.
If don't want to include everything on that external drive, put the folders you do not want backed up on the +Do not back up+ list. What I've done for my external FireWire drive (which is my primary data storage volume since my internal is only 160GB) is create two main folders. They are called Documents and +Documents (not backed up)+. They serve as an extension of the user account folder on the internal drive. Files and folders I want backed up go into Documents. Files and folders that are non-critical go into +Documents (not backed up)+. So then, the external drive volume gets removed from the +Do not back up+ list, so that Time Machine backs it up. But I put the +Documents (not backed up)+ folder back on the +Do not back up+ list so that only the Documents folder gets backed up.
If you do daisy chain off the FireWire 800 port, be sure to put the 800 drive first on the chain. Putting the 400 drive before the 800 drive will reduce the speed to the 800 drive to 400 speed.
perhaps the beach ball I often get when working with iTunes is a product of the speed of the data being accessed on the external hard drive.
My +iTunes Music+ folder is on an FireWire 400 external drive. I do not notice any issues with iTunes accessing the files. That drive is attached directly to the iMac's port with no daisy-chaining behind it. If the free space gets low, the files and remaining free space will get more fragmented, and that can also cause such issues.

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents. I have repaired permissions pn the main harddrive. When I try too click on a disk I get the previously stated error. I can't even open up information to see what permission/access there is. It simply will not let me see the content. It shows the content of my main hard drive when I have clicked the other harddrive's name.

Solved:
sudo chflags 0 /Volumes/"FCP Time Machine BU"
sudo chown 0:80 /Volumes/"FCP Time Machine BU"
sudo chmod 775 /Volumes/"FCP Time Machine BU"
sudo chmod -N /Volumes/"FCP Time Machine BU"

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

Cannot install Yosemite as it keeps telling me both my internal and external drives are time machine backups

Cannot install Yosemite. Keeps telling me that both my internal and external
drives are backing up with TIme Machine. Any suggestions?

Is it actively backing up, or are you encountering a dialog stating that Yosemite cannot be installed because the disk is being used for Time Machine backups?
Read OS X: Cannot install on a volume used by Time Machine for backups
If for some reason you have a folder called Backups.backupdb at the root level of the hard disk on which you want to install Yosemite, move it to the Trash.

Why did my event library stopped showing my partitions and external drives?

The event library stopped recognizing my computer partitions and my external hardrive. It looks like all events are available, just not organized by partitions and drives. The partitions and external drive still show up in the project library.

I don't see anything like what you mentioned... " having a folder at the root level that emulates a camera, a folder with a name like DCIM or Private." Here are the windows showing the files on the user/HD, the tutorial image and the external drive. You can see the Final Cut Folders in each. In the past, I would see each of these in the Event Library so I could create a new event wherever I want to store it. I have also included a screen shot of FCPX showing the Project Library. It still shows the various devices, as I am used to seeing in the Event Library.

I can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive.

i can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive. Help please ?

Most likely, the "requested location" where you are trying to copy files to does not have WRITE permission, and so you need to change the permissions.

How do I Retrieve imovie projects from and external drive back into my mac internal drive

How do I Retrieve imovie projects from and external drive back into my mac internal drive?
Thank You

Every working drive, Internal or External, should produce an Icon on your Desktop. If you cannot see those, click on the Desktop (to get Finder) and choose Preferences off the Finder Menu. The general pane has checkboxes for "Show these items on the Desktop:"
Double click the Icon for your External Drive to open it. Open the folders on it until you find the Items you want to copy. Drag them to the Icon of your Internal Drive, or open the folder where you want them to land and drop them in there.
A drive that does not appear on the desktop after you have asked it to may be damaged. But it would be smart to do a Restart to see if it is recognized again at next Startup.

My computer crashed. I saved my music in cloud and external drives. Re-installed iTunes on computer. No playlists are listed. Will I lose them if I connect my iPod to the computer?

My computer crashed. I saved my music in cloud and external drives. Re-installed iTunes on computer. No playlists are listed. Will I lose them if I connect my iPod to the computer? Some of my playlists are work related. I NEED THEM! Don't want to lose them!

Was the ENTIRE iTunes folder copied from the computer to the External drive? If so, simply copy it back and everything in iTunes will be exactly as it was in iTunes.

Firewire incompatibility w Video and external drive

I recently purchased an iMac G5 for video editing and wanted to use my external drive mainly to store my iMovie projects. Obviously the video camera and the external drive are disturbing each other that much, that the external drive stops working when I am capturing video on the internal drive. Capturing directly on the external drive did not work anyway; daisy-chaining camera and drive neither.
Following configuration: iMac G5 2 GHZ, 20 " screen, 2GB RAM, OS 10.4.1, LaCie 250GB external drive with FW 800 and 400 (done firmware upgrade on this drive); Canon MV 750i.
Any help would be really appreciated!

The external drive is formatted MacOS extended.
Of course I don't have to transfer large files simultaneously, but it would be nice not to have to capture everything to the internal drive first and then transfer it to the external drive.
Moreover, there are situations where it is not easy to disconnect the external drive each time the cam is connected and turned on. For example, I am working on an iMovie project located on the external hard drive, find a clip archived in FootTrack that I want to add. To import this clip I have to capture it from the camera. Now I have to close the project, disconnect the external drive, capture the clip (assuming the FootTrack archive is on the external drive I have to close FootTrack and can't control if I am really importing the right clip), disconnect the camera, reconnect the external disk transfer it and import it into iMovie...... done!
Better than nothing, but not exactly how one imagines to work.

Time Machine, Mozy and external drives? Somehow I lost 300GB of data! :(

Hello:
I have 2 external 500 GB hard drives. One a USB drive used for Time Machine, the other a firewire 800 drive I use for HD video/iMovie files and editing. I also have Mozy (online backup service) installed and running in the background. Not sure what updates I have been running, but about 2 weeks ago I would start getting the spinning color wheel or "spinning beach ball of death" where the mouse pointer/curser would not return. All I could do to recover was hold the iMac power button dow to issue a hard reset. After several occurrences of this event I started yanking my peripheral devices and it seemed to be caused by one if not both external hard drives. 'Cause when I unhooked them, the busy curser went away. Anyway, after this happened for a few days then my external hard drives started randomly un-mounting. Eventually the firewire drive would never remount. WelI, I yank the drive out of the case it was in and put it in another case thinking maybe the external case has gone bad... the strange thing, I could still see the drive in "System Profiler" but it would never mount, even did a PRAM reset. Anyway, I got it in another case, USB only, and it showed up in "Disk Utility" but when I checked it, is said the file structure was bad and couldn't be repaired. So I had to reformat it. Now I'm trying to download 300GB from Mozy because the DVD option from them (Mozy) will cost over $200 (this is what they are charging for the DVD retrieval option)... BTW, the free download retrieval option keeps bombing out on me too, so now I'm not sure I will ever get my files back. Oh well... does anyone have a clue what may have happened here so I don't get in this predicament again... we can start with me not screwing things up but beyond that? Oh, I did hot plug the USB and firewire drives and got warnings about un-mounting first, but with a spinning color wheel I could not do anything like that. Sorry this is partially a vent post. This makes me disappointed in Apple and/or Mozy. This was my first Apple computer purchase and had hoped for something more robust. I can get this same treatment with a PC... at least with a PC I am a little better prepare, I expect this to happen. Anyway I'm done, for now.
mn3

mn3:
I'm sorry to hear about all your troubles!
In the future, if you have an issue that occurs twice or more in a short period of time, you need to start looking at what's going wrong so you can keep things safe.
With regard to those external drives:
You may want to invest in the application Disk Warrior; it can repair many errors that Disk Utility isn't able to touch.
Odds are what happened is you thoroughly corrupted the directories on the drives by yanking the USB cords instead of ejecting them properly. If the directory is corrupted, it's no easy task to get the data saved!
A few questions about the drives:
1) What are the brand names?
2) Have you used these drives with other machines in the past?
3) Do the drives have their own power supplies?
4) Were they connected directly to the iMac?
Some questions about your computer:
1) Have any other peripherals caused you troubles?
2) How large of a hard drive does the computer have & how much space is free?
3) How old is the iMac?
4) Do you have the original install discs?
Lots of questions, but the answers should be helpful.
~Lyssa

Firewire 800 external drive no longer mounting

My firewire 800 external hard drive is no longer mounting on my MBP. It powers up, spins, but has no reaction to being plugged into my computer. I've tried connecting it and the turning it on, and connecting it while it was already turned on. I've tried different cables and different types of adapter cables (fw800 to 400, fw800 to USB, etc.), but there is no communication between my drive and my Mac. Same goes if I connect it to my wife's Macbook, or my iMac at work.
I recently had the logic board and left i/o board replaced on my MBP, I'm not sure if this is relevant since the drive has worked since the replacements and I get the same results on other Macs.
What should I do next?

who makes the drive set up?
OWC for example has a history of bad power supplies that make the drive not accessible (drive spins up but never spins all the way up)
-matt

Cannot mount any firewire/USB external drive after software update 10.5.4

After the last software update on 10.5.4 it did not complete the installation, and get stuck at the last step of running installation script for hours. So I have to restart the computer, and it restarted fine. Then I use Disk Utility to check my hard disk, and discovered some file system inconsistency error, so I repaired it (in target disk mode by another Mac). After it is repaired, the file system passed with no error.
But ever since then, I cannot mount any external firewire drive or USB drive. I cannot use Time Machine to backup my disk. I think my firewire and USB ports are fine because I can restart my iMac in target mode and connect to my MacBook via firewire, so the hardwire ports are functional, except that it seems 10.5.4 cannot detect or mount any external drive after the failed software update.
Does anyone encounter similar problem? How can I fix it? I have my disk backed up by TimeMachine but I cannot restore it if it won't let me mount my TimeMachine disk. Is there any other way other than completely reinstall 10.5 from scratch?

first, you should try reinstalling 10.5.4. download the [combo update|http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054com boupdate.html] and run it. If that doesn't fix the issue, you can use full system restore from TM to go back to a time before the troubles started. to do that boot from the leopard install dvd, once past the language screen go to the Utilities menu at the top and choose "restore from backup".

Migrating to a new iMac, Time Capsule and external drive involved.

The family has gotten a lot of use out of the good old 2.16 iMac Core 2 Duo but it was time to upgrade. So now we have a 27” 3.2 iMac, 2x 4Gb, 1Tb of storage to migrate to.
The mess is this...
There are 4 users on the old iMac.
The old iMac is full to the brim, no room left on the HDD.
Some time ago I hooked it up to a WD 500GB external drive and moved each users music to the WD. In addition I moved the iPhoto libraries to the WD too.
Now it’s time to migrate and I’m not sure where to start. I do know where I want to end up though.
I want to move all the information that is spread across the old iMac HDD and the WD external drive to the new iMac...consolidate it back. To back things up I have a new 3Tb Time Capsule which will also wirelessly back up a Macbook Pro and a Macbook Air. For additional back up I also have a 2Tb G Tech external drive.
My thoughts are these.
Use the G Tech as a temporary bridge. Partition the drive, and back up the iMac to one side and the WD external to the other.
Then migrate the old iMac to the new iMac.
Then from the G Tech move the iPhoto libraries and the iTunes to the new iMac.
Questions I have:
There is a back up of the old iMac on the WD external that may have important information not stored on the old iMac internal drive. Is there a way to merge the files and keep the newest information and dump the redundant?
How do I ensure that my iPhoto libraries don’t get messed up? It seems that when even installing updates that now and then some thumbnails disappear.
How do I partition the Time Capsule for multiple machines?
What is the best use for the G Tech? Storage of photos and music or redundant back up of the Time Capsule?
I’m sure my post will generate as many questions as answers so I’ll stop here and see what shakes out. Thanks in advance for the input and responses.
Stuart

I'm ready to use Setup Assistant now but connectivity may be an issue. Pondini's recommends Firewire. The issue is I don't have a FW400-FW800 cable. USB is all I have that is common to all my devices. Is that even a consideration? Ethernet is an option between the two iMacs but Pondini seems to elude to Migration Assitant over Setup Assistant when using that connection. Am I confused on that issue?
Sources options
2006 iMac                         G-Tech
USB 2.0                            eSATA
Firewire 400                       Firewire 800
Ethernet                            USB 2.0
Destination
2013 iMac
USB 3.0 (2.0 compatible)
Thunderbolt
Ethernet

Daisy chain from Thunderbolt external drive to Firewire 800 external drive?

Can I go from a Thunderbolt external drive, using its second thunderbolt port via the Apple Thunderbolt/Firewire adapter to a Firewire external drive?

Sharon,
did you do anything else besides copying your library to a fire wire drive after your last post Aperture not responding ?
Since that library probalbly already needed fixing, I'd recommend to force quit Aperture and use the "First Aid" to repair your Library.
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Regards
Léonie

Firewire and external drive

Similar Messages

Maybe you are looking for