Firewire and USB combo card

Which is the most reliable/compatible with the 9600 and 9500s? Do they require special drivers or will OS9.2.2 say hello to them and just get on with them? Are Sonnet the holy grail of mac upgrades? I've seen a lot of their stuff dotted over the Web.
Thanks!

I have three or four different no-name USB cards in my 9600s, and they have all worked fine for years. The key is to be certain they are FIRMLY seated in the PCI slots with a decided "kerplunk" sound!! It takes more force than one reasonably expects to seat PCI cards in a PM9600 (and I suspect in a 9500 as well.)
I don't have immediate need for firewire, so I've never acquired a card, as I figured the cost would only come down, pending when I actually acquired a need! However, I've read good things about the Sonnet combo cards, and especially they have a triple-combo card which as I recall provides firewire, USB, and an ATA bus for extra ATA/IDE hard drives. The latter is usually a bit pricey, or has been when it was new, but would be good if PCI slot space is at a premium.
I noticed from one of your other posts that you were using Norton; you should definitely read www.alsoft.com for information about DiskWarrior, the Mac's best friend, especially for the older Macs and for the pre-OS X operating systems. DW is extremely safe to use, keeps your invisible directory file in perfect order, and fixes the most common cause of trouble in the Macs. There is unfortunately a problem with getting a new, BOOTABLE pre-OS X version of DW from Alsoft, such that one gets the DW program on the CD but one has to make one's own BOOTABLE CD and transfer DW onto it. However, nevertheless, having DW is virtually mandatory for happy Mac-ing!

Similar Messages

Seeking reliable firewire and usb 2.0 combo cardbus card

Subject line says it all, or mostly so. I have an IoGear GUF202 pcmcia card with two USB 2.0 ports, one six-pin FireWire port, and one four-pin FireWire port. Its USB 2.0 services are not reliable; sustained transfers freeze my 1Ghz Titanium PowerBook G4. I've seen online several other cards from different manufacturers with the same form factor, but haven't yet found one with the preferred NEC chipset for USB services.
Can anyone offer a recommendation -- and a source? Swapping separate FireWire and USB 2.0 PC cards is becoming a pain.

Hi Jamie,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Firewire and USB PCI Upgrade for PowerMac G5

Firewire and USB PCI Upgrade for PowerMac G5
I am looking to add more Firewire 400 and USB 2.0 ports to my Dual 2.7 PowerMac G5. I don't need a combo card (two separate cards is fine). I was wondering which brand card works well with my Mac and OS X. I had a FireWire card that I moved from my Dell to my PowerMac but had a number of problems with a couple connected HDD's and Final Cut Pro. The card which I think was from Belkin was listed as OS X compatible on its packaging.
Thanks for any guidance.
- Lou

Check out OWC/Macsales. Usually can't go wrong with Sonnet or an OWC "house branded".
http://www.macsales.com
Check out user reports for PCI G5 Compatibility
http://www.xlr8yourmac.com
I've used OWC FW800, Aaxeon PCIe, and a number of Sonnet USB2 (and combo).
Depends on how many USB2 ports, but for FW400 and USB2 combo should do fine. With FW800 I'd go for independent cards.

Firewire and USB

In my process of researching to buy a new Intel Macbook I've discovered that there is only one firewire port, two USB 2.0 ports, and no pcmcia port.
Here's my problem. This laptop will replace my old powerbook that I use for recording audio. I need one bus for audio to enter the laptop and one bus to access my external hard drive to write the audio. I currently have a firewire bus card in the pcmcia slot and use the firewire port for the other bus on my powerbook. This optimizes the amount of data that Logic can process. My worries with the new macbook is that USB 2 is typically slower than firewire. So using the firewire and USB 2.0 ports may slow me down. I know the old powerbooks with USB 2.0 had issues with the USB 2.0 bus being really slow compared to PCs. Was this problem ever fixed? Does anyone have any experience with this or any suggestions? I know I could just buy a macbook pro, but I really didn't want to spend that much money.

Actually there's more than just another FW port. It's a FW800 port, ExpressCard/34 expansion slot, faster and better GPU with more VRAM, faster CPU, more RAM, bigger hard drive, and higher resolution screen.
You're buying a business computer. That means you are making an investment. You can write off the investment which reduces taxes. Doesn't it make better sense to be dollar wise rather than penny foolish? Over a three year write-off period you're bartering over $250 per year.
The MacBook has no expansion future whereas the MacBook Pro does.
However, this is ultimately your decision. All I wanted to do was point out the benefits of the MBP over the MB. I should probably stop here lest I sound like I'm making a sales pitch - which I'm not. I own a MacBook and two MBPs. I like them both.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Journaling External FireWire and USB 2.0 Hard Drives?

I have several FireWire and USB 2.0 Hard Drives which I have always formatted as "Mac OS Extended (Journaled)".
I have been told that journaling is a waste of time with external HDs and, if anything, will slow them down slightly.
What is the general consensus on this forum?

Thank you for the swift response Malcolm.
I better explain why after all these years I am having doubts.
I am awaiting the delivery of a new piece of kit - a Western Digital HD TV Media player. Basically, you put your hi-def videos (H.264) on a USB 2.0 HD, plug it into the media player which is then plugged into your HDTV.
I have got hold of the manual which says that the supported USB file systems are "FAT32, NTFS and HFS+ (no journaling).
So I was wondering whether I will have to format the HD without Journaling to make it work?

Firewire and USB not usable

my friends machine is no longer using devices connected to the firewire and USB ports. Here is the description of troubleshooting steps so far. Any other suggestions?
--- snip ---
suddenly my G5 tower stopped recognizing any firewire device... no harddisk no soundcard.... also the same harddisk is not recognized via USB....
BUT.... the USB ports recognize USB sticks, mac keyboard, mouse.. no problemo.
also.. at the same moment the built in soundcard (mac av) stopped working, AND the internal CD drive !!!
i tried : flashing the PRAM ... on boot up hold down command, option, P, and R until the machine reboots it's self then let off the keys...
and; resetting the PMU:
1. If the computer is on, turn it off.
2. Disconnect ALL cables from the computer, including peripherals and power.
3. If possible, move the computer to a place where you are not standing on carpet.
4. Open the case and ground yourself by touching part of the metal frame inside the computer.
5. Find the Cuda or PMU button
6. Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
7. Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
and i tried: resetting NV-RAM
Re-start holding the O,F, option, and command keys until a white screen is reached, this will be the open firmware
screen. You will be prompted to release keys at this point.
Type in the command line, reset-nvram. Press enter, next command line type in, reset-all and the computer will re-boot.
so.... i have no more solutions at this point !!!

gromit95 wrote:
replaced battery did not fix problem
condition of new battery questanable exp date march 2010 but it was a new battery
fred
That date code was probably the build date code, rather than the expiration. This would be true for either the Tadiran or Saft batteries. The lithium batteries have a shelf life of up to 10 years.

Firewire and USB ports not recognizing devices

All of a sudden, some of our MacBooks don't recognize firewire and usb devices. It's weird, but after about a week, one of the MacBooks suddenly started recognizing a video camera, again, but it's troubling because my users need to be able to import movies and pictures from digital devices.
We ran the updates, and it did not help. We have been using these devices with our MacBooks for over a year, and this happened at the worst possible time. Any ideas?
I've tried both self- and AC-powered devices, rebooted, powered off and on, made sure everything is plugged in, etc.

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

HT2494 How do I output video to a projector from my MacPro17 with only firewire and USB ports?

How do I output video to a projector from my MacPro17 with only firewire and USB ports?

No Mac Pro only has Firewire and USB. Perhaps you've misidentified the computer:
http://www.everymac.com/ should help.

How do you reset the firewire and USB? My ports are intermittent. I suppose

How do you reset the firewire and USB ports? My ports are intermittent. I suppose it could be a hardware isssue, but still wonder if I can reinstall/reset the software without reformatting my drive.

Hello! Resetting the ports is done by resetting the pmu. press the button once with all external cables unhooked. Below is a pict of an example of the pmu location. Also an intermittent problem is often a bad cable. Tom
[IMG]http://img470.imageshack.us/img470/1623/mddlogicbd4ga.jpg[/IMG]

IPod dock connected to both firewire and usb at same time

I have 3 ipods, 3G 4G 60gb photo 5G 80gb vid. I have a 5G doc and a dual usb / firewire cable. I prefer to manage my 3G and 4G using firewire as it is oh so quicker. However 5G requires usb2 only. I have a Apple 'dual' usb/firewire port cable that at the moment to use I alternate which socket is plugged into the front port of my PowerMac G5 as they are the only spare ports I have.
I just bought an Iomega Ultra Max which comes with a built in firewire and usb hub that means i now have enough ports to dedicate one of each to the ipods but want to use only one dock and so I would like to plug both the firewire and usb iPod cable into the hub and leave them there connected to the iPod dock. I know it won't cause problems when the 5G is connected as there is no hardware for firewire connection. But the 4G has both.. will I encountering a usb and firewire conenction cause problems and possible damage to the ipod or my PowerMac G5, will the 4G ipod use firewire in prefeance to USB if it will work???

Hi iPodista;
I would recommend very strongly that you don't even attempt do this. Generally cross connecting in this fashion is a very good way to get yourself into serious troble.
Allan

External HDs not showing up on computer via firewire and usb

All external hds do not show up on the computer via firewire or usb. I must have perfomed some updates with my hardware plugged in. Does anybody know how to get this fixed?

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.3.9 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE

Old extreme n, and usb media card reader

hey, i am trying to hook up an iogear usb media card reader, a usb memory stick, and a portable 2.5" hdd to the belkin mac mini usb hub, and the hub to the old airport extreme n base station.
the usb stick and the hard drive are recognized without any problems.
the media card reader shows up in the disks tab of the airport utility, but it doesn't show something is connected to the card reader when a card is added. it just keeps showing 0MB in all four slots.
usb hub is powered, card reader is not.
when i connect the reader to the AEBS directly i get the same result, so i don't think the hub is the problem, since it runs other two devices flawlessly.
usb card reader works fine when connected directly to any computer as well.
any ideas? is it not possible to connect a card reader to the base station?

Unfortunately not.
The only devices that work are printers, disk drives and hubs.

Seagate 7200.8 (firewire and usb) won't unmount

I have a Seagate 7200.8 300 GB PATA hard drive that won't dismount. I have 3 different brands of external firewire/usb cases and this particular hard drive just won't dismount while installed in any of them and it doesn't matter if I have it connected to firewire or usb. When I drag it to the trash nothing happens and the drive stays mounted. If I then turn it off I get the message warning me about all the bad things that will happen if I don't dismount first. The only safe way I know of to dismount it is to shutdown the mac and then turn off the hard drive. This is on a Powermac G5 Dual 2.0 (PCI, 4 ram slot) with 2.5 GB ram and a single internal 250 GB hard drive running 10.4.3 and all current updates.
Powermac G5 2.0 Mac OS X (10.4.3)
Powermac G5 Mac OS X (10.4.3)

send it to a data recovery company if you don't have a backup. If you dont have a backup, you'll wish you did when you see how much money it costs to retrieve data off a damaged HDD (if they can even retrieve a portion or all of it). Google "hdd data recovery" for lists of companies.

MacPro Front Firewire and USB Ports Acting Up

Devices connected to the front firewire 800 and USB ports on my MacPro are acting up. (2x2.66GHz dual-core, early 2007) I put a firewire rugged LaCie onto the firewire port and the MacPro hung. The drive works fine on my MacBook. On the MacPro, the CPU on all cores ran up to 100% and the machine became inaccessible. I put a 80 GB video iPod on the USB port and it could not sync without errors. Could not eject the iPod - OS X reported that an application was accessing the device, even though nothing was running.
It seems as though connecting devices to the front ports initiates a process that does not behave and/or teminate correctly. All other ports work OK, including those on the back of the machine and the USB and firewire ports on my Cinema display.

OK, a couple of things. First, have you tried another USB cable? You may have one that is flaky at USB2 speeds which can cause all sorts of mischief.
Have you tried both "free" USB ports on the machine, or the USB port on the machine that you have the keyboard hooked to?
Finally, you may find some information in your system log that would point to the answer.
In my own experience, USB2 on the G5 has not been capable of reaching serious transfer rates. While I get transfer rates close to 60 MB/sec through FW800, I have never gotten more than about 13 MB/sec through USB2, using several flavors of external drive/SATA toaster/enclosure interfaces. However, I have also had bad USB cables lock the machine up like the Tin Man.

Display Firewire and USB w/Macbook

Hi,
Two questions:
1. Would there be three connections between a Macbook and a Apple Display?
a. DVI
b. USB
c. Firewire
2. How would the Macbook (1 FW 400 and 2 USB 2 ports) treat the 4 USB's and two FW 400 ports on the display?
Thanks!
Donny

1) Yes
2) The ports (2 firewire and 2 USB) on the display are just from a hub. They'd be treated like any other USB or firewire port.

Firewire and USB combo card

Similar Messages

Maybe you are looking for