Firewire as audio out - can i send my iTunes out through my firewire port and into a DAC?

I have a 5 year old (retired) MacBook with firewire 400 and 2 USB 2 ports. I want to use it as my music source for a fine stereo system. I want to know if I can use my firewire port to ship my digital music signal out to a DAC before sending it to my pre-amp in analogue format. OR, can I use the optical digital audio out in the heaphone jack to do it? What is the bandwidth of the optical out?

You do not need .Mac in order to send photos by e-mail. It sounds like you use ATT as you internet provider. Have you configured Apple Mail to be able to send e-mail yet? Can you send an e-mail text message OK?
If you haven't yet gotten Mail configured to work with your ATT account a quick call to ATT should give you all the information you need. Setting up Mail is easy.
Post back with further questions.
Regards,
Steve M.

Similar Messages

Is there a way to force audio out through the Thunderbolt port?

I am trying to connect a 15" MacBook Pro to an InFocus 3916 using a Mini DisplayPort to HDMI adapter.
I know that the computer, adapters, and cables I am using support audio over HDMI.
I have tested 4 separate adapters, 2 cables, and 2 computers, all of them work when hooked up to a Samsung HD TV.
I know the Projector supports audio over HDMI, because I plugged a Apple TV into the projector using the same cable, and it worked fine.
When I am using the Samsung HD TV: System Preferences->Sound->Output shows "Samsung" in the choices of outputs.
When I try using any of the three Infocus Projectors, it only shows the internal audio.
I have tried resetting the PRAM, and SMC. I have tried plugging in an audio cable to my computer to force a refresh of the Sound Preference Pane... I have tried turning on and off the projector.
At this point I am trying to find a way to force Mac OS X to recognize the Projector as an audio output... Or at least to force the computer to think there is something there, so that it will push sound out the thunderbolt port.
MBP Hardware Configuration:
15" MacBook Pro, Late 2011
2.2 GHz Intel Core i7
AMD Radeon HD 6750M 512 MB
OS X Lion 10.7.2
Latest updates except Apple Remote Desktop 3.5.1

mjs1138 wrote:
endasil, Thanks for the reply. I'm currenlty running the program from within the NetBeans IDE. It is the output displayed by in NetBeans "output" that I'm looking at.
--- MikeI don't use Netbeans, but I would guess that it too pipes Standard Out and Standard Error to the same console. You didn't address my comment. Are you printing to System.err as well? This happens implicitly if you use Exception.printStackTrace(), for example.

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

There has never been a reliable firewire ---> USB adapter suitable for external high speed storage. This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
The only high speed port on the Air is the ThunderBolt port. There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options.

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

No audio out through Mini Displayport?

Last night I hooked up my first-gen MBA to my plasma TV using a connector that converted the Mini Displayport to HDMI. The movie I streamed from Netflix looked great. One problem -- no audio. I guess there's no audio out through the Mini Displayport? I was forced to hook up computer speakers to my MBA. Is there a way I can get audio to go through the Mini Displayport rather than the audio-out/headphone jack?

There are a couple of adapters out that will convert DVI plus optical audio to HDMI (with audio). They are all made by the same company (though they are branded and priced differently). I think they are currently running around $100. The problem you might run into is HDCP. Apple doesn't do HDCP with their DVI... so you'll end up not having a compliant HDCP chain... if that is important to you.
If you do this setup, make sure you have your TV set to a setting that is pixel to pixel... that is, doesn't adjust for overscan. Lest you loose some of your computer desktop.

Is it possible to play iTunes audio out through USB to receiver to power speakers?

I thought you should be able to.Play iTunes audio out through USB to a receiver equipt with USB mode as I can with my iPad Air, but I can,t find in preferences on my 2013 iMac any out put and I get no signal to the receiver/amp. Is it possible? What am I doing wrong?

Yes
A 3.5mm to RCA cable or adapter will work fine for stereo between the Mac's headphone jack and receiver's RCA input.
for example's
> http://www.amazon.com/RiteAV-3-5mm-Stereo-Female-Cable/dp/B0018MI5F6
> http://www.amazon.com/C2G-Cables-40645-Stereo-Adapter/dp/B000J1H4VI/
Additionally if your receiver is equipted with digital input, you could use a Toslink cable with a 3.5mm adapter on the Mac end.
example
> http://eshop.macsales.com/item/Newer%20Technology/CBLAOPTMT/

Can I take an itunes credit from one Apple ID and send it to another?

I purchased a gift card for my son, but when checking for the email, it added the money to my account. How can I send it to his account?

Click here and request assistance.
(80443)

How can i send an itunes gift voucher to someone in a different country?

how can i send an itunes gift voucher to someone in a different country? I live in the UK and want to send a voucher to someone in the US

No, they are only valid in your own country - so you can only send gift certificates (or gift actual content) to people whose account is based in the same country as your own.

Can we send pre-test score (Pre-test question slide) and post test score (Question slide) both in lms from captivate?

can we send pre-test score (Pre-test question slide) and post test score (Question slide) both in lms from captivate?

Pretest score normally is not sent to the LMS. However it is stored in a system variable, you could use JS to send it.

How can i send a PDF file to my i phone and be able to read it

How can i send a PDF file to my i phone and be able to read it

Use the free Adobe Reader for iPhone -> https://itunes.apple.com/us/app/adobe-reader/id469337564?mt=8.
Clinton

Why would the Firewire Port and/or External DVD-RW suddenly not work?

Hi, it's me again. I swear, I must be destined to just use Windows machines...
Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
Ok, so that is the back story to my problem, which happens to be this:
I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

IMac i7 Quad-Core firewire port and video camera

Has anybody tried to detect a video camera connected to the firewire 800 port?
I have already tried with two PRO tape-based DV video cameras: SONY PD170 and PANASONIC AG-HVX200E with no results. The same models do not have any problem with iMac 27" Core Duo 2.
Apple care protection plan has been useful only to know that if my iMac firewire port can handle an external Hard Disk, as it does, the compatibility with the camera is not a problem of Apple, but simply mine.
Any suggestion? Any help to find official pages by Apple with technical specification about firewire port and protocol of the new iMac 27" i7?
Thanks, Carlo
Message was edited by: Carlo G

Today my Mac has finally been fixed. I had to send it to Milano, to SATA srl, where they have replaced the logic board. Now I can import video from my video camera using the FireWire port. Thank SATA!!!
Message was edited by: Carlo G

I have an iphone and i took notes on it today and i want it to appear on my macbook pro. how do i do this. i think the phone is under a yahoo account and my computer is under something else. how do i log out of the yahoo acct and into the other.

i have an iphone and i took notes on it today and i want it to appear on my macbook pro. how do i do this. i think the phone is under a yahoo account and my computer is under something else. how do i log out of the yahoo acct and into the other.

Create a new user account on the computer that he can log in to.

TS3297 I can connect to the itunes store through the itunes store app, but when I try to make a purchase within Clash of Clans a box comes up saying my purchase cannot be completed, and another saying cannot connect to itunes store. HELP!

I can connect to the itunes store through the itunes store app, but when I try to make a purchase within Clash of Clans a box comes up saying my purchase cannot be completed, and another saying cannot connect to itunes store. HELP!
I've turned my iPad off, then on again, I've logged out of iTunes, and logged back in, I've updated my credit card information, but nothing seems to be working. Is this a problem within the app?

toshiro-99 wrote:
when I try to make a purchase within Clash of Clans a box comes up saying my purchase cannot be completed, and another saying cannot connect to itunes store. HELP!
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I ha e some educational videos that belong in "Podcasts." Help?

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I have some educational videos that belong in "Podcasts." Help?

Select/highlight the ones that you want to change in your iTunes library, do Get-Info (control-I) and change their Media Kind on their Options tab to 'Music Video' - and then similarly for the podcasts.

Firewire as audio out - can i send my iTunes out through my firewire port and into a DAC?

Similar Messages

Maybe you are looking for