Firewire board does not fit in the PCI slot

I got a Firewire board and tried to put it in the mother board and it does not fit. It appears that the mother board bus is a fraction too short to fit the board in. I placed the board in a real computer (dell) and it went in fine. Any suggestions??????

Navy, welcome to the forum,
it would be helpful if you could post which 3000 Desktop and Operating System you have, even better post the Type and Model Number this will help members to help you. Please do NOT post your s/n.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

Photo does not fit in the screen

I watched that video http://www.youtube.com/watch?v=KJMi5l9Ru-g and tried this to do the parallax scrolling with the image this on my page. Unfortunately, my photo does not fit in the whle screen, even if I take a . jpg image 3000 px wide. ( look here ) I have no idea how I can get the photo to fit in the whole screen.
Thank you for your help.
Heike

Hello again,
I'm sorry, but nothing works and I don't understand, what you mean. I will show you again with no other item on the page. I draw a rectangle which snaps each of the lines at the outside.
I got rid of the stroke and the fill.
I filled with a .jpg image 3000 px wide.
For the future parallax scrolling I need to set up the photo in vertical tile. And this is, how it shows on the screen.
I still have no idea, what I made wrong. Thanks for your help
Heike

I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

If your MBair is a 2012 model, it has a Magsafe 2 power connection. The monitor probably has the old magsafe connection. If this is the case, you need this adapter.
http://store.apple.com/us/product/MD504ZM/A?fnode=5a

Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RS

Please expand the log also please check the SAP note 1835436
Regards
Aneesh

Template does not fit into the window

Hello all,
<b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
I am getting the above error in when i try to preview my smartform.
The template is in footer window. I have only 3 lines in the template.
And the size of template is less than window size.
I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
If you have any suggestions Please help.
Thanks.

Hi,
Please check the following points:
1. Font size and font family.
2. Line spacing
3. Allignment.
4. Left and right margin
Deserve Rewards.
regards.

Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

Clean the lint or grit out of it with canned air or a toothpick.

I have a Sony Mini HiFi ((CMT-BX70DBI) and my 4th gen does not fit on the iPod dock. I assume I need a new adaptor but don't know which one??

I have a Sony Mini HiFi (CMT- BX70DBI) and my 4th gen does not fit on the dock. I assume I need an adaptor, but which one?

If the Sony uses the Universal Dock System you need this adopter. If it does not they try Sony.
http://store.apple.com/us/product/MC650ZM/A?fnode=MTY1NDA0OQ&mco=MTg5MTgxMjc

Brand new 3GS Headphone jack does not fit in the jack hole , anyone else?

I just bought 32gb white 3GS 1 1/2 weeks ago, and I just went into the box to try my earphones for
the first time. I thought I was dreaming,, but I could not get the jack to fit in the hole Even slightly forcing it didn't help. I didn't want to go crazy on pushing it. I decided to take my light case of the phone, just to make sure that the case wasn't getting in the way.. It only goes down about 3/4 way down the hole. I turned on some music,, but obviously the jack is not down enough to make the connection. Has anyone else had this problem? It just doesn't seem to want to fit, and yet it is the brand new one that came with the phone.

OK,,, I guess I will have to try,, but the way the hole is structured, I am afraid to push too hard, and perhaps have the plastic around the metal rim crack the top of the unit from the stress. Is this a one and only time I have to go through, because I have given it a more than ample push,, and if I have to experience that every time.. I had better go to the Genius bar to find out if I can get one with a more forgiving insert. I will also go to the Rogers store and see if I get the same experience on their demo
Message was edited by: Stoker
Message was edited by: Stoker
Message was edited by: Stoker

HT4994 old sim does not fit in the iphone

Trying to move old sim data to new iphone4s sim, but the old sim card is to big to fit in the iphone as instructed to do - any suggestions would be grateful of do i need to get this done at a shop??

The iPhone 4 and 4S use a microSIM.
Contact the carrier for a replacement SIM for the device.

Hi, I have a late October 2008 Macbook Pro Unibody which I wanted to use my Magma Expressbox card with. I had a Silver Macbook Pro before which this worked fine with but for some reason my newer Macbook Pro does not even recognize the Expresscard slot?

Highly anooying as I can't even use the Express Card slot at all, due to the fact the Macbook doesn't even recognize it exists. Has anyone else had this problem. If so, how was it fixed? I only upgraded my Macbook Pro due to the fact Ineeded a better performance but I still need my Expressbox1 to work with my UAD DSP card. If not the buying the new MAcbook was a total waste of money if the Express Card does not even fundtion on it? Please help!!

Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2)

I received a new iBook G4 display but it does not fit in the board?

I ordered an iBook G4 display for an iBook G4 and set out to install it but the display has a 6-pin inverter cable while the logic board looks like it only receives a 4-pin cable.
Is there any way around this? Why do the displays have different pins?

No, I got the right display, Apple designed it wrong.
I have all the parts to an iBook G4 and they're all stupidly incompatible. I have a G3 screen with a completely different connector. I ordered a A1055 logic board and got a 14" board (for a 12"). Because Apple gives boards the same part number (whether they are 12" or 14").
I have two G4 logic boards with 4 pin inverter cable ports and 2 displays with 6 pin inverter cable input.
You can put a 4 pin inverter cable into a 6-pin inverter port. I'm going to cut 2 pins off of the inverter connector with an exactoknife and see if it works because this is ridiculous. I have all these parts and cannot even make 1 working laptop.

I recently bought a mac book air (mid 2013) and the power adapter that came with it does not fit into the port.

The port has a small silver knob next to the pins that is preventing the adapter from connecting. I've never seen a port that looks like this and the tech specs say that the port should be a magsafe 2. Has anyone seen anything like this before? I've included a picture

You can return a new Mac within 14 days of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.

Verify by Visa does not fit in the window

The Verify by Visa page is too big for the window
as a result one cannot enter all the security information to complete the purchase
the only way to make purchases is to use something like Internet Explorer for online shopping - Verify by Visa works on that platform.

Did you try to reset (Ctrl + 0; zero) the page zoom (or zoom out: Ctrl + -) on that page to see if that helps?
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

I have bought an Iphone 4 16g but the Tmobile Sim card which fitted my IPhone 3 does not fit into the IPhone 4

If anyone has any advice or information I would be very grateful. It appears that the Sim "holder" is too small for my Sim card used in the IPhone 3.

You should get a new micro-SIM from T-Mobile. It is possible to cut down a standard SIM, but often that leads to erratic behavior or destruction of the SIM.
Regards.

I had an ipod touch 4th gen and used the apple universal dock to play music through my stereo. I just got a 5th generation and a lightning adapter but the adapter does not fit the universal dock. Apple tech support has no solution, does anyone?

I had an ipod touch 4th generation and used the Apple Universal Dock to play music through my stereo. I just got the 5th generation and the lightning adapter but the adapter does not fit into the dock. Apple tech support has no solution, does anyone?

That is the adapter I purchased from Apple which does not fit in the Apple Universal cradle (which apparently is no longer universal). However, I just created my own solution. The cradle holds the dock connector at a slight angle so the adapter, which has a straight bottom edge, will not slide down far enough to make a connection. Since the adapter has a plastic case, I used my Swiss Army knife to whittle it down to fit. It's a no-tech solution, and free!

Firewire board does not fit in the PCI slot

Similar Messages

Maybe you are looking for